I am a designer and engineer that has worked on a very wide variety of projects over the years. Solidworks is my 3D modelling program of choice. My background is that I grew up in Birmingham, studi... Read more

I am a designer and engineer that has worked on a very wide variety of projects over the years. Solidworks is my 3D modelling program of choice. My background is that I grew up in Birmingham, studied and worked in Bristol and currently live in London. I have a Masters in Mechanical Engineering, and worked a total of six years at Airbus (formerly British Aerospace). I ended up as a Structural Design Engineer, working with CAD, focussing on wing design for research and new projects. I left Airbus to pursue further studies and completed the Innovation Design Engineering course, a combined MA/MSc co-run by the Royal College of Art and Imperial College in the summer of 2011. I have been freelancing since then on a wide variety of tasks, running the gamut from creative to technical for such clients as Epson, Intel, Loowatt, the Royal College Of Art, Seeper, Spark Create, Studio XO and WPP. I have helped make fashion garments with integrated technology for major pop stars, exhibition designs on the future of retail and even a waterless toilet for use in developing countries. I am always on the lookout for new, interesting adventures and challenges, and work on many projects in my spare time to increase my learning.

I am a design engineer, graduated from Brunel University in 2015. Expertise in a wide variety or 3D modelling, sketching, concept design (both 3D and 2D) prototyping, electronics design and design for... Read more

I am a design engineer, graduated from Brunel University in 2015. Expertise in a wide variety or 3D modelling, sketching, concept design (both 3D and 2D) prototyping, electronics design and design for manufacture. From graduating I have run an industrial services company, I own a Design Engineering consultancy and have worked on a wide variety of projects from startups to big name brands. Happy to work under NDA

London-based designer and engineer currently undertaking a double masters in Innovation Design Engineering at the Royal College of Art and Imperial College London (MA+MSc).

London-based designer and engineer currently undertaking a double masters in Innovation Design Engineering at the Royal College of Art and Imperial College London (MA+MSc).

I am a Mechanical Design Engineer with 10 years of experience in the steel industry R&D Department. I specialize in: - 2D & 3D CAD modelling and technical drawings (SolidWorks & AutoCAD) - Reverse e... Read more

I am a Mechanical Design Engineer with 10 years of experience in the steel industry R&D Department. I specialize in: - 2D & 3D CAD modelling and technical drawings (SolidWorks & AutoCAD) - Reverse engineering & manufacturing drawings - Industrial gearboxes and gear couplings, advanced 3D modelling in KISS Soft - Motion analysis & design optimization If you need precise and professional mechanical designs, I am here to deliver high-quality work with attention to detail. Let’s collaborate on your next project!

*FEMI EMMANUEL* 287 Fylde Road, Preston, Lancashire, PR2 2NH ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ I am writing to express my interest with you With a *Master’s degree in Construction Project Management* from the *Universi... Read more

*FEMI EMMANUEL* 287 Fylde Road, Preston, Lancashire, PR2 2NH ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ I am writing to express my interest with you With a *Master’s degree in Construction Project Management* from the *University of Central Lancashire* and over four years of hands-on experience in CAD design, civil engineering, and formwork solutions, I am confident that my technical expertise and commitment to sustainable design align perfectly with your company’s goals. In my previous roles as a *Civil Design Engineer* at *Builtec* and *Software Trainer* at *Pillar CAD*, I gained extensive experience in *AutoCAD (2D/3D)*, *Autodesk Revit*, and *Inventor*, producing over 500 design drawings and BIM models for civil and infrastructure projects. My experience extends to *structural design*, *formwork detailing*, and collaboration with engineering and production teams to ensure designs are manufacturable, accurate, and compliant with quality standards. Beyond my technical background, I bring strong *problem-solving skills a keen eye for detail and a sustainability-driven mindset*—values that align closely with your company’s commitment to environmentally responsible engineering. My postgraduate research at UCLan focused on sustainable construction technologies and efficient project delivery, equipping me with both the practical and theoretical foundation to contribute effectively to your projects. I am particularly attracted to this opportunity because of your reputation for delivering *innovative infrastructure solutions and fostering long-term professional growth*. I am eager to apply my design expertise and engineering background to contribute to your ongoing success while continuing to develop my skills within a forward-thinking environment. Thank you for considering my application. I would welcome the opportunity to discuss how my skills and experience can benefit your design team. I am available for at your earliest convenience and can be reached at +44 7502104993or via email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Yours sincerely, *Femi Emmanuel

-3 years’ experience as a design engineer specialising in alkaline electrolysers -GA delivery including Swagelok piping and electrical routing -Completed 3 projects for UKAEA through FIP programme -Dr... Read more

-3 years’ experience as a design engineer specialising in alkaline electrolysers -GA delivery including Swagelok piping and electrical routing -Completed 3 projects for UKAEA through FIP programme -Draftsman experience producing machinists’ and fabrication drawings -High‑quality rendering experience for marketing imagery -Masters Degree in Creative Technology, First Class Bsc(Hons)

I'm a design engineer based in Ireland. I have 15 years of Solidworks experience working and designing heavy equipment. I'm an expert in: Weldments Sheet-Metal design Assembly design Mechanical Engin... Read more

I'm a design engineer based in Ireland. I have 15 years of Solidworks experience working and designing heavy equipment. I'm an expert in: Weldments Sheet-Metal design Assembly design Mechanical Engineering Simulation Hydraulic circuits I additionally have conventional 3D modelling experience in blender, making models for games, PBR texturing, rigging, animations and rendering.

Mechanical & Product Design Engineer with experience in 3D CAD modeling, assemblies, and detailed 2D drawings. I focus on turning ideas into practical, manufacturable designs that are ready for protot... Read more

Mechanical & Product Design Engineer with experience in 3D CAD modeling, assemblies, and detailed 2D drawings. I focus on turning ideas into practical, manufacturable designs that are ready for prototyping or production. My approach is careful, precise, and collaborative. I value clear communication and consistency in every project. Whether you need a single component or a complete design package, I deliver well-structured CAD files and documentation that meet your requirements and deadlines.

I am a Structural Design Engineer based in London, U.K. I have over 4yrs experience in the industry, mainly working on residential projects in central London. I have worked for 3 of the top Structura... Read more

I am a Structural Design Engineer based in London, U.K. I have over 4yrs experience in the industry, mainly working on residential projects in central London. I have worked for 3 of the top Structural Engineering firms in the city on projects of various sizes. I have strong structural design capabilities in steel, concrete, timber and masonry and also have excellent project management skills and interpersonal skills. Services: - Structural sketches - Structural CAD drawings - Outline structural designs - Final detailed structural designs

Design Engineer, with over 30 years experience. - Sheet metal enclosures including ruggedised. - Machined items - Plastic parts - Product design - Design for manufacture - FEA - Rendering

Design Engineer, with over 30 years experience. - Sheet metal enclosures including ruggedised. - Machined items - Plastic parts - Product design - Design for manufacture - FEA - Rendering

As an accomplished and dedicated engineering professional, my comprehensive hands-on experience will make me an excellent addition to your organization as Electrical Project/Design Engineer. I am conf... Read more

As an accomplished and dedicated engineering professional, my comprehensive hands-on experience will make me an excellent addition to your organization as Electrical Project/Design Engineer. I am confident I will quickly prove myself as a vital member of your team. As my enclosed resume demonstrates, I will leverage my expertise and resourcefulness to drive the achievement of your ambitious business goals. Please consider the following highlights of my qualifications: • Skilled multilingual project leader with over 8 years’ electrical design engineering experience in consulting organizations and 3+ years’ teaching assistant expertise for an engineering faculty. • Highly-skilled user of BIM throughout the building services life cycle specializing in electrical systems design incorporating BIM best practices and expert knowledge of Revit and Navisworks software to quickly deploy quality designs. • Talent for rapidly learning new technologies and multiple certifications to support my Electrical Engineering degree including P.Eng, LEED Green Associate, LEED AP BD + C and National Council or Examiners for Engineering and Surveying (NCEES) recognition. • Proven ability to foster cross-functional partnerships and engage key stakeholders to support project success. Throughout my career, I have been successful in solving problems, resolving conflict and contributing to shared objectives. In me, will gain a diligent and focused professional with a tireless work ethic and relentless drive to achieve the goals set before me. Thank you for your consideration. I would welcome the chance to work with you at your earliest convenience. Hatim Rumble

Facing quick market launch pressures? Perhaps you are working for a recently-funded start-up? And, in the meantime, are you tired of getting sub-optimal design due to communication issues from third... Read more

Facing quick market launch pressures? Perhaps you are working for a recently-funded start-up? And, in the meantime, are you tired of getting sub-optimal design due to communication issues from third party CAD designers who do not understand your industry and your project scope? Bring your product vision to life with expert CAD Design services, covering the Automotive, Aerospace, Electronics, Industrial Machinery, Consumer Goods, Medical Devices, Energy Sector and Sports Equipment industries. As a UK Mechanical Design Engineer with over 5 years of experience in the above mentioned industries, my work is defined by quality and attention to detail, ensuring each project's success through clear communication and a collaborative approach. I value respect and reliability highly, which has helped me successfully complete +150 projects as well as maintain good relationships with clients. Listed are the services I offer: 3D CAD Design 3D CAD Rapid Prototyping 3D CAD for 3D Printing 3D CAD Modifications and Optimisation 3D Rendered Images 2D Technical Drawings Industrial & Product Design Let's turn your concept ideas into a finalised product!

A resourceful, well-read and experienced electrical engineer with a passion for delivering exceptional quality of design. Knowledge: CIBSE Guide K - Electricity in Buildings SLL Code for Lighting... Read more

A resourceful, well-read and experienced electrical engineer with a passion for delivering exceptional quality of design. Knowledge: CIBSE Guide K - Electricity in Buildings SLL Code for Lighting 2012 and CIBSE Lighting Guides (LG5, LG7, LG9, LG16) BS 5266-1, BS 5839-1 and BS 5839-6 BSRIA Guides (BG 1/2008, BG 1/2010, BG 2/2009, BG 31/2012, BG 32/2014, BG 33/2014) Spon’s Mechanical and Electrical Services Price Book 2015 University of Oxford Estates Services - Mechanical and Electrical Design Philosophy 9 Design philosophy documents for Bicester Village and Berkeley Group Building Services Engineering: 6th Edition Work Experience: OCSC - Intermediate Electrical Engineer Furness Green Partnership - Electrical Design Engineer Hoare Lea - Senior Technician Relevant Skills: AutoCAD Revit MEP Navisworks Bluebeam Revu Relux and DIALux Amtech ProDesign Microsoft Office

Experienced and qualified design engineer with a career spanning over 16 years across the engineering, tooling and design sectors in Australia and UK. Proven track record in completing a broad range o... Read more

Experienced and qualified design engineer with a career spanning over 16 years across the engineering, tooling and design sectors in Australia and UK. Proven track record in completing a broad range of design, research and modeling in line with client specifications, budgets and timelines. Solid background in many aspects of UK and Australian engineering standards with a demonstrated in client, contractor, supplier and stakeholder engagement

Educated to high level, graduating first from Furniture Design and manufacture and later Marine Engineering with a focus on High Performance composites and Marine structure design. Currently working... Read more

Educated to high level, graduating first from Furniture Design and manufacture and later Marine Engineering with a focus on High Performance composites and Marine structure design. Currently working predominantly as design engineer for new build superyachts in the south of England and often super/mega yacht refit and modifications around Europe. I am experienced in 3D modelling for concept design, CAD CAM, 3D printing and producing manufacture drawings for shop floor. I have produced rendered images and presentations of design concepts, and given detailed manufacture specifications for components, furniture and large modifications for some of the largest Superyachts in the world. E.G. Yachts Rising Sun, Aglaia/Ahimsa, Ecstasy, Moonbird, Nirvana, Cinderella IV and many more. I have a very good understanding of manufacture processes and I daily deal with issuing manufacture instructions and specifications by means of 2d drawings and discussions with project managers. I am willing to discuss any design work required which involves 3D modelling, 2D engineering drawings, rendered presentations or images, composite tooling, 3D printing, CNC etc. My CV and Portfolio is available for viewing on my linkedin page at: https://www.linkedin.com/hp/?dnr=PftixpWM2PD2ww1CPoADxmg32X82fwUopQtA

Hello, I am Marco, a Mechanical Design Engineer based in London. In my firsts months in UK I ran into 3D printing how Product Designer and now I can't stop it. I got into the additive manufacturin... Read more

Hello, I am Marco, a Mechanical Design Engineer based in London. In my firsts months in UK I ran into 3D printing how Product Designer and now I can't stop it. I got into the additive manufacturing because is amazing to see how my designs are brought to life only in a few days. This industry offer a cheaper way to get prototypes. Since I was a child I spend all my spare time experimenting, building and repairing things. Nothing better than the satisfaction of making things better.

I graduated in 2015 with a 1st Class degree in Engineering Product Design. I have worked within the construction industry for 3 years, 2 of which were designing solar shading solutions for projects wo... Read more

I graduated in 2015 with a 1st Class degree in Engineering Product Design. I have worked within the construction industry for 3 years, 2 of which were designing solar shading solutions for projects worth anything from £200,000 to £2 million, and the other year was spent in the M&E industry where I worked as a CAD Engineer on prestigious projects such as TATE Britain & The new Damien Hirst Gallery. I am now a mechanical design engineer within the Rail industry and have thorough experience taking a project from concept to manufacture, and producing manufacturing quality drawings. I have also been required to produce 3D renderings for exhibitions and present them graphically.

A self-motivated mechanical and product design engineer – with a history in Tool and Die making, component production, machine design, installation and commissioning – all of which have enabled me to... Read more

A self-motivated mechanical and product design engineer – with a history in Tool and Die making, component production, machine design, installation and commissioning – all of which have enabled me to develop a sound understanding of the manufacturing process and thus allowing me to design more cost-effective and practical solutions. As a reliable and professional designer who strives to maintain the highest standard of quality and consistency, I keep myself well informed of any new and innovative advances in both design and manufacturing technologies, recommending the implementation thereof, when appropriate.

Automotive Body Design Engineer & Data Professional with extensive experience in the automotive industry, specializing in body design engineering and Trims Skilled in using industry-standard tools su... Read more

Automotive Body Design Engineer & Data Professional with extensive experience in the automotive industry, specializing in body design engineering and Trims Skilled in using industry-standard tools such as CATIA-V5, Vis Mock up, Teamcenter, and Autoform Simulation to contribute to the design and development of vehicle body structures. This hands-on engineering background provides a strong foundation for solving complex industrial challenges with precision and innovation.

Design engineer with more than 8 years of experience in HVAC industry. Experience in 3D design of sheet-metal parts and assemblies. Experience in nesting and elaboration of programs for CNC punch p... Read more

Design engineer with more than 8 years of experience in HVAC industry. Experience in 3D design of sheet-metal parts and assemblies. Experience in nesting and elaboration of programs for CNC punch press. Experience in CNC programming with Delcam FeatureCAM. Experience in design of jigs and fixtures. А quick problem-solver, takes ownership to meet short deadlines, highly flexible and adaptable to new situations. Excellent attention to detail