Hire the best freelance STAAD Pro expert designers for your company

I am a highly skilled Civil Engineer with specialized expertise in MEP (Mechanical, Electrical & Plumbing) systems and HVAC design, analysis, and implementation. With 15+ years of professional experie... Read more

I am a highly skilled Civil Engineer with specialized expertise in MEP (Mechanical, Electrical & Plumbing) systems and HVAC design, analysis, and implementation. With 15+ years of professional experience, I have successfully delivered residential, commercial, and industrial projects that required seamless coordination between structural, architectural, and MEP disciplines. What I Offer: - Civil Engineering Services: Structural design, site development, grading plans, concrete/steel design, code compliance, and cost estimation. - MEP Engineering: Full design and coordination of mechanical, electrical, and plumbing systems with CAD/Revit-based modeling. - HVAC Expertise: Load calculations, duct design, equipment selection, energy-efficient solutions, and system troubleshooting. - Software Proficiency: AutoCAD, Revit, HAP, Carrier E20, STAAD Pro, ETABS, and Navisworks. - Deliverables: Complete construction drawings, detailed BOQs, shop drawings, 3D coordination models, and compliance reports. Why Work With Me? ✔ Multi-disciplinary expertise: Civil + MEP + HVAC integration. ✔ Proven track record in delivering on time and within budget. ✔ Strong attention to detail, ensuring compliance with international codes and standards (ASHRAE, NFPA, NEC, IPC, etc.). ✔ Collaborative and client-focused approach to problem-solving. Whether you need structural design, MEP coordination, or efficient HVAC solutions, I can provide engineering support that ensures safety, sustainability, and cost-effectiveness.

I am Structural engineer and also Autodesk Revit Certified Professional. I have won the National Level BIM challenge organized by Autodesk. I have been working on the projects like Sustainable Library... Read more

I am Structural engineer and also Autodesk Revit Certified Professional. I have won the National Level BIM challenge organized by Autodesk. I have been working on the projects like Sustainable Library, mall, hospital, residential tower, guest house and many more. I am working in this industry from past 4 years and have successfully delivered many of the projects in those 4 years. Also my skills are not restricted to Revit but I am equally competent in most of the BIM softwares namely Navisworks, sketch up, etabs, staad, civil 3D and many more. I make sure my clients feel very comfortable with me so that we can work on long terms in future, so client satisfaction is uttermost for me.

👋 Hello! I'm Eng. Ahmed Hamdy, a Mechanical Design Engineer with 7+ years of specialized experience in Static Equipment Design including Pressure Vessels, Process Piping, Piping Stress Analysis, and... Read more

👋 Hello! I'm Eng. Ahmed Hamdy, a Mechanical Design Engineer with 7+ years of specialized experience in Static Equipment Design including Pressure Vessels, Process Piping, Piping Stress Analysis, and API Storage Tanks. I bring a deep command of international codes and standards such as: 🔧 ASME Sec. VIII Div. 1 & 2 🔧 ASME B31.1 / B31.3 🔧 API 650 My expertise includes: ✅ Pressure Vessel & Heat Exchanger Design ✅ Process & Power Piping Layouts and Stress Analysis ✅ Storage Tank Detailing and Fabrication Drawing ✅ Compliance with ASME/API design requirements ✅ Comprehensive 3D Modeling and Design Documentation I deliver engineering documentation with precision and compliance, including: 📌 GA Drawings & Fabrication Drawings 📌 Isometric and Piping GA Drawings 📌 BOM/MTO, Data Sheets & Specifications 📌 Stress Analysis Reports (Caesar II) 📌 Pipe Support & Structural Design Reports 💻 Software Proficiency: AutoCAD | AutoCAD Plant 3D | AVEVA E3D | SolidWorks | Caesar II | STAAD.Pro | Tekla Structures I collaborate closely with multi-disciplinary teams and participate in: 🔹 Project Kick-off Meetings 🔹 3D Model & P&ID Reviews, Plot Plan Reviews, HAZOP sessions 🔹 Managing MOCs (Management of Change) from concept to commissioning As a focal point for Piping Design & Stress Analysis, I ensure all modifications are properly integrated, prioritized, and aligned with project timelines — especially during Turnaround (TAR) Planning. My goal is to contribute to your project's success by combining technical accuracy with high-quality deliverables and effective communication. Let’s connect and discuss how I can support your next project with world-class mechanical design solutions. Eng/ Ahmed Hamdy Mechanical Design Engineer | Static Equipment | Pressure Vessel | Piping Stress Analysis (ASME/API)

A B.Eng Civil & Structural Engineer proficient in AutoCAD, ArchiCAD, Civil 3D, Revit, Sketchup and analysis software. Worked in roads, structures (towers and bridges) and water (including dams) projec... Read more

A B.Eng Civil & Structural Engineer proficient in AutoCAD, ArchiCAD, Civil 3D, Revit, Sketchup and analysis software. Worked in roads, structures (towers and bridges) and water (including dams) projects. Always open to learning and growing and delivering value/excellence.

I am a Structural Engineer and Architect CAD Technician specializing in Structural Designs and Architecture. I have gained valuable experience in structural design and analysis, seismic analysis, and... Read more

I am a Structural Engineer and Architect CAD Technician specializing in Structural Designs and Architecture. I have gained valuable experience in structural design and analysis, seismic analysis, and various software applications like ETABS, STAAD, Planswift and AutoCAD. I am proficient in using AutoCAD and can do a Structural and Architectural related drawings. What I usually offers? (1) Structural Analysis and Design (2) Structural Plans (Structural framings, connections and detailing) (3) Analysis and Calculations (4) Architectural Drawing Plans (PDF's, sketches, and images to dwg file)

Studied Bachelor of Technology and have worked upon various projects on different Designing Software such as AUTOCAD 2D&3D,SOLIDWORKS,CATIA V5,AUTOCAD ADVANCE STEEL DESIGN,PROCESS EQUIPMENT DESIGN as... Read more

Studied Bachelor of Technology and have worked upon various projects on different Designing Software such as AUTOCAD 2D&3D,SOLIDWORKS,CATIA V5,AUTOCAD ADVANCE STEEL DESIGN,PROCESS EQUIPMENT DESIGN as per ASME CODE on PV-ELITE SOFTWARE,STAAD-PRO for RRC AND WATER TANK and other structuraldesign.Beside all this, I got a keen interest in autodesk inventor, 3DS MAX and google sketchup and AUTODESK REVIT My Skill set includes : AUTOCAD,SOLIDWORKS,CATIA V5,STAAD PRO,AUTODESK INVENTOR,ADVANCE STEEL DESIGN,PROCESS EQUIPMENT DESIGN AS PER ASME CODE ON PV-ELITE ,GOOGLE SKETCHUP,3DS MAX, AUTODESK REVIT, MEP ON AUTOCAD DESIGN nand basic knowledge of ANSYS AND SNP2000 DESIGN. Field of interest: static equipment design as per ASME CODE,structural design, automobile design and civil structural desgin.

I am a professional Civil Engineer with 9+ years working experience in design & drawing. Besides my CAD works, I give support in 3D Modeling, Rendering, and Animation in SketchUp to my valued clients.... Read more

I am a professional Civil Engineer with 9+ years working experience in design & drawing. Besides my CAD works, I give support in 3D Modeling, Rendering, and Animation in SketchUp to my valued clients. Structural design and drawing is my another expert zone.

I am a detail-oriented Civil Engineering professional with a sharp focus on structural design and digital drafting. With a strong foundation in engineering principles and advanced proficiency in indus... Read more

I am a detail-oriented Civil Engineering professional with a sharp focus on structural design and digital drafting. With a strong foundation in engineering principles and advanced proficiency in industry-standard software, I help architects, builders, and engineering firms bring their visions to life with precision and safety. My technical toolkit includes mastery of AutoCAD, Revit (BIM), and structural analysis software such as STAAD.Pro. I specialize in creating detailed shop drawings, permit sets, and 3D models for residential and commercial structures. I understand that in the online freelance world, turnaround time and accuracy are paramount. I treat every file submission as a reflection of my professional integrity—clean, organized, and error-free. Let me handle the technical heavy lifting so you can focus on the bigger picture. I am available for short-term drafting projects or long-term collaborative partnerships.

Structural Engineer with passion for construction and development. Pursuing and growing towards BIM processes. Determine to find optimal solutions and present it as pragmatic and effective as possibl... Read more

Structural Engineer with passion for construction and development. Pursuing and growing towards BIM processes. Determine to find optimal solutions and present it as pragmatic and effective as possible

Some of my Professional and Academic Projects are • Frame structure design of Commercial Building Using ETABS 2016 • Site Management and Supervision in Metro Train Project • Supervision and Pr... Read more

Some of my Professional and Academic Projects are • Frame structure design of Commercial Building Using ETABS 2016 • Site Management and Supervision in Metro Train Project • Supervision and Preparation of CAD Contouring Sheets of 220&500KV T/Line • Vetting of Construction Drawings and Bar Bending Schedules • Preparation of 3375sq. ft Modern Contemporary House CAD Design Mexico • Frame Structure Design of Residential Building • Truss Design of Industrial Building Design • Steel Industrial Building Design • Steel Bridge Design • Retaining wall Design I adopted step by step procedure according to the Code i.e. ACI 2014 for Residential Building, Retaining wall, AISC 2010 for Industrial Building and AASHTO Specifications

As an accomplished structural engineer with over nine years of dynamic experience in the construction industry, I have successfully managed a wide array of projects—from planning and cost estimation t... Read more

As an accomplished structural engineer with over nine years of dynamic experience in the construction industry, I have successfully managed a wide array of projects—from planning and cost estimation to completion—ensuring quality, efficiency, and strict compliance with technical specifications. I hold a Master’s degree in Structural Engineering from Visvesvaraya Technological University and a Bachelor’s degree in Civil Engineering. My expertise spans advanced cost estimation, BOQ (Bill of Quantities) preparation, and quantity surveying, with a specialized focus on industrial isolation structures. In my career, I have led diverse projects including laboratory developments, office buildings, and container yards with budgets up to ₹11 Cr, utilizing industry-standard tools such as AutoCAD, STAAD Pro, and the full MS Office suite for precise modeling, working drawings, and comprehensive project documentation. My hands-on experience encompasses preparing detailed estimates, tenders, and running account bills while coordinating effectively with contractors and multidisciplinary teams to ensure seamless project execution and quality control. Having worked on government projects and held pivotal roles at esteemed organizations like the National Center for Antarctic and Ocean Research, Goa State Infrastructure Development Corporation Limited (GSIDC) and AR Constructions, I have honed my skills in architectural detailing, stakeholder coordination, and innovative problem-solving. As I join Freelancer, I am eager to leverage my technical acumen and proven leadership in project management to deliver high-quality, client-focused solutions. Let’s collaborate to transform your vision into reality through meticulous planning and effective execution.

Civil Engineer with expert skills in Structural engineering. and trained as a CAD Engineer. I am specialized in AutoCAD, STAAD PRO, ETABS, and Other design software and have professional experience in... Read more

Civil Engineer with expert skills in Structural engineering. and trained as a CAD Engineer. I am specialized in AutoCAD, STAAD PRO, ETABS, and Other design software and have professional experience in preparing steel and RCC structure design, analysis, and drawings for building permits, construction, and other purposes.

I am Satheesh. I have more than 4+ years of working experience as an architectural designer. I am proficient in all kinds of building architecture work. I can assist you with: - Site plan - Drafting... Read more

I am Satheesh. I have more than 4+ years of working experience as an architectural designer. I am proficient in all kinds of building architecture work. I can assist you with: - Site plan - Drafting of Architectural floor plans - Elevation & Section drawings - Landscape drawings - Interior design - Conversion of PDF/JPEGs to AutoCAD drawings - Plan for a house renovation, extension or re-modeling - Preparation of documents/drawings for building permits as per relevant codes - 3D modeling and realistic rendering - 3D walk-through of spaces - Lighting, material, and rendering of existing 3D models My software skills: AutoCAD, SketchUp, VRAY, Enscape, Photoshop I always give my 100% to any project I take on and deliver more than the client has asked or expected. Please scroll down my profile to find my portfolio and reviews for previous projects. Regards, Satheesh.

With 18 years of experience in structural analysis and drafting, I provide detailed engineering solutions for residential, commercial, and industrial projects. I bridge the gap between architectural v... Read more

With 18 years of experience in structural analysis and drafting, I provide detailed engineering solutions for residential, commercial, and industrial projects. I bridge the gap between architectural vision and structural reality. I also offer high-end Civil CAD services for engineering firms and developers looking for precision and speed.

Graduate as a mechanical engineer, with 7 years experience on mechanical design. Certified as professional on SolidWorks, member of ASME,

Graduate as a mechanical engineer, with 7 years experience on mechanical design. Certified as professional on SolidWorks, member of ASME,

Greetings everyone. I'm Akshay, a first class Civil Engineer from Mauritius. In addition to the engineering degree, I hold excellent A-level and O-level certificates from the University of Cambridge.... Read more

Greetings everyone. I'm Akshay, a first class Civil Engineer from Mauritius. In addition to the engineering degree, I hold excellent A-level and O-level certificates from the University of Cambridge. I have work experience in MEP Engineering and Civil Engineering. I have the ability to understand complex building plans and to make plans in Autocad software. I was among a team of Engineers that was responsible for the construction of luxurious villas in Mauritius. I have worked with some French Consultants like Climeo and have been dealing with MEP Engineering in Autocad. I am very conversant with different softwares in the civil engineering field. These softwares include Prokon, Staad Pro, Revit Architecture, Revit Structure and Autocad. I can draw Architectural plans and Structural plans for infrastructures. I can carry out concrete structures design and produce the structural drawings in a short period of time. I have already designed house plans for several persons and I understand the importance of working in 3D mode. Regarding architectural design, I can produce modern building designs and deliver high quality rendered images and building plans. I have the ability to meet tight deadlines and I believe this will make me an ideal candidate. I am a dedicated and honest person and from my work experience and qualifications, I can be considered as a multi-tasker. Some of my other key skills are as follows: • Good communication skills. • I am able to work on my own as well as in group and promote team spirit. • Excellent organizing ability; aptitude to meet many competing deadlines as well as taking my share of responsibility. • Fluent English and French speaker; ability to read and write in English and French

CIVIL ENGINEER I CAN PROVIDE YOU A GOOD QUALITY AND ACCURATE DRAWING I HAVE DONE LOT OF PROJECTS ON AUTO CAD

CIVIL ENGINEER I CAN PROVIDE YOU A GOOD QUALITY AND ACCURATE DRAWING I HAVE DONE LOT OF PROJECTS ON AUTO CAD

i have 14+ yrs of experience in Steel structure design and detailing work. Good knowledge of Indian, American, British, Australian standard. I have my own setup and well skilled team with Licensed Tek... Read more

i have 14+ yrs of experience in Steel structure design and detailing work. Good knowledge of Indian, American, British, Australian standard. I have my own setup and well skilled team with Licensed Tekla software.

Graduate Engineer with 10 year experience in Designing and development of Tools (Assembly and Inspection Fixture) and Die, Mold for Aerospace & medical company (AS9100 CAT D) company.

Graduate Engineer with 10 year experience in Designing and development of Tools (Assembly and Inspection Fixture) and Die, Mold for Aerospace & medical company (AS9100 CAT D) company.

I am a Civil Engineer with 15 yrs of Exp. in Designing & Detailing of Steel Structures and also the PEB Structures. Strength- Problem Solving,Hard work ,Never giving up till the end of projects. Givin... Read more

I am a Civil Engineer with 15 yrs of Exp. in Designing & Detailing of Steel Structures and also the PEB Structures. Strength- Problem Solving,Hard work ,Never giving up till the end of projects. Giving additional things as per basic structural Concepts. Skillsets- Structural analysis, PEB Structural Design, Estimation of steel structures.Detailing & Drafting.

I am a Mechanical and Structural Design Engineer with over 8 years of experience delivering high-quality CAD and engineering solutions across manufacturing, steel structures, and product development p... Read more

I am a Mechanical and Structural Design Engineer with over 8 years of experience delivering high-quality CAD and engineering solutions across manufacturing, steel structures, and product development projects. I support companies, startups, and fabricators by converting ideas into accurate, production-ready designs using SolidWorks, AutoCAD, CATIA, and STAAD.Pro. My core expertise includes: • Structural steel design and detailing • Industrial frames, rigs, and heavy structures • Sheet metal and fabrication-ready models • Mechanical assemblies and product components • CNC / laser-cut ready DXF & manufacturing drawings • Structural analysis and FEA validation With hands-on experience in steel manufacturing processes such as CNC laser cutting, rolling, and bending, I design with fabrication efficiency in mind — reducing errors, minimizing rework, and improving cost-effectiveness. I am focused on precision, practical engineering, and clear communication — ensuring every project moves smoothly from concept to production.

I’m a passionate Civil Engineer with over four years of experience in structural design, project planning, and construction management. I specialize in using AutoCAD, Revit, STAAD.Pro, and ProtaStruct... Read more

I’m a passionate Civil Engineer with over four years of experience in structural design, project planning, and construction management. I specialize in using AutoCAD, Revit, STAAD.Pro, and ProtaStructure to create precise and efficient designs for residential, commercial, and institutional projects. With an HND in Civil Engineering from The Polytechnic Ibadan and certifications in Project Management and Health & Safety, I bring both technical expertise and a strong commitment to quality. I take pride in turning ideas into durable, well-designed structures that meet client needs and exceed expectations.

We provide all kinds of 2D and 3D work using Softwares like Autocad Revit architecture and also analysis Softwares like STAAD pro kindly visit our blog www.civilmadesimple.blogspot.com for more info.

We provide all kinds of 2D and 3D work using Softwares like Autocad Revit architecture and also analysis Softwares like STAAD pro kindly visit our blog www.civilmadesimple.blogspot.com for more info.

I've been a Civil engineering and Architectural designer of SM supermalls at Philippines. My expertise is about Building design, Structural design, 3D modeling and Rendering services using different e... Read more

I've been a Civil engineering and Architectural designer of SM supermalls at Philippines. My expertise is about Building design, Structural design, 3D modeling and Rendering services using different engineering and design softwares such as follows : Autocad Sketchup 3D modeling software Vray Rendering plug-ins ETABS structural analysis Epanet Water system With the following specialties in design and planning preparation: - Architectural plans - Interior Design - Structural plans - Structural Analysis - Sanitary/Plumbing plans - Electrical Plans - Mechanical Plans - fire protection - HVAC design - LPG Design - Bill of materials and specifications preparation I am a Building and Design Officer of SM Supermalls for almost 5 years. The responsibilities involves the handling mall constructions and operations, engineering & design operations, planning & budgeting, business leadership and experience overseeing engineering/maintenance teams in developing, testing, and remedying technical engineering problems, as well as my superior project management and team leadership abilities. I also mastered the following Engineering and design softwares which may be useful for the benefit of your office as follows: Auto-Cad, Staad, E-tabs, 3D Max ,Architectural software,3D Illustrator, Sketch-up,V-ray Render, Autodesk sketchbook, Surfer10 surveying software, Epanet Water System, Cyber link Power Director, MS Project, Microsoft Math, Mathlab, Microsoft Word, Excel, PowerPoint and Animated Presentations.

I have an experience of 2 years in AutoCad works . I can do any structure drafting with all types of beams , Slabs , Columns , deck slabs , zshear walls etc. I can also do the architectural work li... Read more

I have an experience of 2 years in AutoCad works . I can do any structure drafting with all types of beams , Slabs , Columns , deck slabs , zshear walls etc. I can also do the architectural work like 2D design of a residential building and revit work .

Greetings! My name is Imran, and I am a professional Civil Engineer with 5 years of experience. My expertise includes converting PDFs to AutoCAD, drafting elevations, sections, and CAD drawings, and... Read more

Greetings! My name is Imran, and I am a professional Civil Engineer with 5 years of experience. My expertise includes converting PDFs to AutoCAD, drafting elevations, sections, and CAD drawings, and creating detailed architectural and construction plans. I also specialize in blueprint-to-CAD conversions. I am proficient in AutoCAD and Revit. I look forward to working with you! Contact me for high-quality work at affordable prices. Thank you for considering my services!

civil engineer. structural analysis and design expertise. lot o software skills......................

civil engineer. structural analysis and design expertise. lot o software skills......................