Hire the best HVAC Design & Shop Drawings experts for your company

Hi, I'm Anees, a Mechanical Engineer with 11 years of MEP design and drafting experience on commercial and residential buildings, including high-rise, hospital, office and residential projects. I hel... Read more

Hi, I'm Anees, a Mechanical Engineer with 11 years of MEP design and drafting experience on commercial and residential buildings, including high-rise, hospital, office and residential projects. I help architects, MEP contractors, consulting engineers and developers turn design intent into clear, buildable drawings, and I back those drawings with the calculations that support them. HVAC & MECHANICAL • Heating and cooling load calculations (Carrier HAP) and equipment selection support • Supply and return ductwork layouts, duct sizing and pressure-drop calculations • Fresh-air ventilation, exhaust and ERV design • VRF/VRV, split, AHU and FCU system layouts; diffuser and grille placement ELECTRICAL • Power, lighting, switching and circuiting layouts • Electrical load calculations, panel schedules, risers and single-line diagrams FIRE ALARM & ELV • Conventional and addressable fire alarm device layouts, risers and schematics, coordinated to NFPA 72 • CCTV, access control, structured cabling and PA layouts and risers PLUMBING • Water supply, drainage and plumbing layouts and risers, coordinated with the rest of the MEP services CAD / BIM DOCUMENTATION • AutoCAD drafting and Revit MEP modeling • PDF, scan and hand-sketch conversion to DWG • Redline incorporation, DWG cleanup, shop drawings, coordination and as-built drawings WHAT YOU RECEIVE Native DWG or RVT files plus a PDF set, organized to your CAD standard or template, with supporting calculation sheets (Excel or HAP reports) and a short revision log with each submission. HOW I USE AI I use AI and scripting for the repetitive parts of the work: checking drawings against a QA/QC checklist, comparing revisions, extracting equipment data into schedules and organizing redline comments. I review every drawing and calculation myself before delivery. AI speeds up the workflow; it doesn't replace engineering judgment. I don't upload client files to third-party AI tools without your permission. Standards I work with include NEC, NFPA 72, IEC, BS 7671 and your project specifications. TO START Send your drawings (PDF, DWG or RVT), the scope and your deadline. I'll review them and reply with any questions, a fixed price or hourly estimate, and a delivery schedule before any work begins.

Revit MEP modeling HVAC shop drawings Firefighting design BIM coordination • BIM Modeling • MEP Coordination • HVAC/Plumbing/FF Design • Shop Drawings • Technical Office Support • Clash Detection & Co... Read more

Revit MEP modeling HVAC shop drawings Firefighting design BIM coordination • BIM Modeling • MEP Coordination • HVAC/Plumbing/FF Design • Shop Drawings • Technical Office Support • Clash Detection & Coordination

I’m an engineer experienced in designing HVAC and MEP systems for commercial and industrial facilities. Whether you’re trying to validate a design, calculate load requirements, or manage a complex con... Read more

I’m an engineer experienced in designing HVAC and MEP systems for commercial and industrial facilities. Whether you’re trying to validate a design, calculate load requirements, or manage a complex construction build, I can help. ​Knows AutoCAD and Revit MEP, HAP, BIM, and Code Compliance ​Full project management from start to finish using Microsoft Project and Smartsheet ​Regular communication is important to me, so let’s keep in touch.

Senior HVAC Design Engineer with 12+ years of experience in HVAC design, BIM modeling, and MEP coordination for commercial buildings, industrial facilities, metro rail projects, and data centers. I s... Read more

Senior HVAC Design Engineer with 12+ years of experience in HVAC design, BIM modeling, and MEP coordination for commercial buildings, industrial facilities, metro rail projects, and data centers. I specialize in HVAC system design, cooling and heating load calculations (HAP), Revit MEP modeling, AutoCAD drafting, chilled water systems, ventilation design, BIM coordination, clash detection, and construction documentation. My expertise includes Data Center Cooling solutions such as CDU, CRAH, CRAC, RDHx, liquid cooling systems, and mission-critical infrastructure. I deliver accurate, energy-efficient, and cost-effective engineering solutions that comply with ASHRAE, CIBSE, and international industry standards. Core Skills: ✔ HVAC Design & Engineering ✔ Revit MEP & BIM Modeling ✔ HAP Load Calculations ✔ Data Center Cooling Design ✔ Chilled Water & Ventilation Systems ✔ Navisworks Clash Detection ✔ Shop Drawings & Construction Documentation ✔ MEP Coordination & BIM Management I am committed to delivering high-quality work, meeting project deadlines, and helping clients achieve successful project outcomes through innovative and practical engineering solutions.

Professional MEP CAD Designer with 10+ years of experience in AutoCAD drafting for Electrical, HVAC, Plumbing, Fire Alarm and ELV systems. I provide accurate, code-compliant and permit-ready CAD draw... Read more

Professional MEP CAD Designer with 10+ years of experience in AutoCAD drafting for Electrical, HVAC, Plumbing, Fire Alarm and ELV systems. I provide accurate, code-compliant and permit-ready CAD drawings for residential, commercial and industrial projects across the USA. Services include: • Electrical Power & Lighting Plans • Fire Alarm Layouts (NFPA) • HVAC Drawings • Plumbing Drawings • Fire Protection Drawings • ELV / Low Voltage Systems • Permit Drawing Sets • PDF to AutoCAD Conversion • Redline Revisions • As-Built Drawings • Shop Drawings • Construction Documentation Software: AutoCAD | AutoCAD Electrical | Revit MEP | Bluebeam Keywords: MEP CAD, AutoCAD Drafting, Electrical Drafting, HVAC Drafting, Plumbing Drafting, Fire Alarm Design, Fire Protection, Permit Drawings, Construction Drawings, PDF to CAD, Blueprint Conversion, Commercial MEP, Residential MEP, USA Permit Plans.

I'm a freelance metal fabrication designer based in the Czech Republic with extensive experience making the things I have designed. I've worked on the production floor the last several years taking sh... Read more

I'm a freelance metal fabrication designer based in the Czech Republic with extensive experience making the things I have designed. I've worked on the production floor the last several years taking sheet metal designs to CNC laser cut, press folded, properly wired and assembled HVAC systems for industrial and private projects. With boots on the ground experience, I know how important a quality design is to a finished product that works well. In the UK, I designed custom signage and metal letter light signs as well as lightbox displays. I'm passionate about production optimization and I apply LEAN principles to all my work, thinking how best to reduce waste and increase value. Availability for UK based clients.

Civil Engineer, Project Manager, and HR Professional executing a dual-track career in localized physical infrastructure delivery and remote international engineering consulting. Directs engineering wo... Read more

Civil Engineer, Project Manager, and HR Professional executing a dual-track career in localized physical infrastructure delivery and remote international engineering consulting. Directs engineering workflows, material procurement, and workforce coordination across multiple organizations, including Catalyst Central, Goch Consult Ltd, Wolfpack, and ASIL Company. Sustained technical collaboration with engineering teams across Australia, Canada, and France. Positions projects for structural compliance, risk mitigation, and fiscal success using advanced BIM, CAD, and geotechnical analysis software frameworks.

HVAC & BIM Designer with 13+ years of industry experience, specializing in Revit MEP, HVAC design, shop drawings, and BIM coordination. I combine hands-on field experience with technical design expert... Read more

HVAC & BIM Designer with 13+ years of industry experience, specializing in Revit MEP, HVAC design, shop drawings, and BIM coordination. I combine hands-on field experience with technical design expertise to deliver accurate, coordinated, and installation-ready mechanical drawings and models.

I am a Senior Mechanical Engineer with over 7 years of experience in MEP systems, specializing in HVAC, firefighting, plumbing, and infrastructure projects. I have strong experience in both technical... Read more

I am a Senior Mechanical Engineer with over 7 years of experience in MEP systems, specializing in HVAC, firefighting, plumbing, and infrastructure projects. I have strong experience in both technical office and site execution, which allows me to deliver practical, accurate, and fully coordinated designs. I have worked on large-scale projects including commercial malls, factories, warehouses, and hospitality buildings. 🔹 My Services Include: HVAC Design & Shop Drawings Firefighting & Plumbing Systems MEP Coordination (Clash Detection) Quantity Take-off & Material Submittals As-built Drawings Technical Reports & Documentation I am committed to delivering high-quality work, meeting deadlines, and maintaining clear communication with clients.

I am a mechanical engineer based in Alexandria, Egypt, providing remote mechanical design and technical office services for contractors and engineering consultants. My experience covers HVAC, plumbin... Read more

I am a mechanical engineer based in Alexandria, Egypt, providing remote mechanical design and technical office services for contractors and engineering consultants. My experience covers HVAC, plumbing, drainage and firefighting systems across commercial, residential, hospitality, educational and sports projects in Egypt and Saudi Arabia. My services include: • HVAC layouts and coordinated mechanical shop drawings using AutoCAD. • HAP cooling load calculations, duct sizing and external static pressure calculations. • Chilled-water flow assessment, pipe sizing, pressure losses and pump duty calculations. • Quantity takeoffs, BOQs, material schedules and tender scope reviews. • Technical submittals, equipment comparisons and supplier enquiries. • Consultant comment responses, redline revisions and as-built drawings. Selected projects include the Guest Palace of Prince Faisal bin Salman, the Villa of Prince Fahd Al Saud, Technical College Female Trainers Housing, Al Nemer Business Center, sports facilities and E-JUST University. My background in site execution, resident consultancy and QA/QC helps me prepare coordinated drawings and practical technical solutions that support installation and maintenance.

With over a decade of expertise, HVAC Drafting LLC specializes in delivering top-notch Ductwork Shop Drawings for HVAC projects using industry-leading software like AutoCAD and Revit. Our focus spans... Read more

With over a decade of expertise, HVAC Drafting LLC specializes in delivering top-notch Ductwork Shop Drawings for HVAC projects using industry-leading software like AutoCAD and Revit. Our focus spans across commercial, residential, and government projects, ensuring optimal HVAC systems tailored to your specific needs. Provide site visit For free estimate send us Mechanical plans to ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or call (929) 253 2718

Hi, I’m Satish Pal, an HVAC Design and Drafting professional with 8+ years of experience delivering accurate, efficient, and code-compliant HVAC solutions for residential, commercial, and industrial p... Read more

Hi, I’m Satish Pal, an HVAC Design and Drafting professional with 8+ years of experience delivering accurate, efficient, and code-compliant HVAC solutions for residential, commercial, and industrial projects. My services include: HVAC Design & Drafting Duct Layout and Shop Drawings HVAC Piping Layouts Ventilation & Exhaust System Drawings Equipment Layout and Coordination Drawings As-built Drawings and Drawing Revisions AutoCAD-based HVAC Documentation

Hello! As in current global scenario, it is my ambition to focus on providing clients all over the world high-quality, timely, and cost effective engineering services. I have extensive knowledge and e... Read more

Hello! As in current global scenario, it is my ambition to focus on providing clients all over the world high-quality, timely, and cost effective engineering services. I have extensive knowledge and experience in the design of HVAC Systems, MEP Systems, AutoCAD, Revit etc. Also, I am an expert in HVAC Design, AutoCAD drafting, HVAC shop drawing, As-built drawing and MEP detail drawing. I acquired all of my experiences from a job I served for six years. I'll complete the task in accordance with your acceptance criteria.

Iam an HVAC Design Engineer with experience in designing air conditioning and ventilation systems for residential, commercial, and administrative buildings. Skilled in cooling load calculations, duct... Read more

Iam an HVAC Design Engineer with experience in designing air conditioning and ventilation systems for residential, commercial, and administrative buildings. Skilled in cooling load calculations, duct sizing, equipment selection, shop drawings, and HVAC system design using AutoCAD, Revit MEP, and HAP. Committed to delivering accurate, efficient, and code-compliant designs on time

Highlights (Technical strength & Skills) • Test reports preparing & reviewing for MEP Systems • HVAC Air balancing • Duct design & sizing • Thermal load calculations • HVAC System D... Read more

Highlights (Technical strength & Skills) • Test reports preparing & reviewing for MEP Systems • HVAC Air balancing • Duct design & sizing • Thermal load calculations • HVAC System Design & selection • Preventative maintenance • MEP Testing & Commissioning • System diagnostics • Primavera P6 & MS project • Carrier HAP 4.51 • MS Word, Excel & power point • Auto CAD • International standards ( ASHRAE, CIBSE, NEEB, NFPA,) • Technical writing Academic(strength & skills) • Machine design problem solving • Heat transfer • Refrigeration & air conditioning • Thermodynamics • Fluid Mechanics • Mathematics General (Strength & skills) • MS office ( word & excel) • File exchange word to pdf & pdf to word • Primavera p6 • Data Entry • Report writing • Technical writing Skills & Experience: (International Experience: United Arab Emirates & Kingdom of Saudi Arabia) •Preparing & Reviewing Reports, Tender Documents, Engineering Calculations with the source of knowledge, specifications, budgeting and literature for HVAC Projects •Design & calculation of cooling/heating loads of commercial & residential buildings by the use of computer software’s like Carrier HAP (Hourly Analysis Program) • FAHU's, AHU's ,DX & Decorative units Selection. • ventilation & smoke control system design & calculation. • Design & Calculation & sizing of airflow ducts for commercial & residential projects. • HVAC System selection for commercial & residential projects. •Data fixation including HVAC design duty parameters. •Scrutiny and comparing of Shop Drawings with the design and Tender drawings •Checking of plans, drawings and quantities for accuracy of calculations. • preparing of ITPs, Technical submittals & Method of statement for Testing & commissioning & Air balancing. •Preparing & reviewing Testing & Commissioning method statement & O & M Manual for MEP works. •Evaluating designs of HVAC systems, plumbing & drainage, irrigation, swimming pool & fire safety and building automation systems. •Creating and carrying out test procedures for MEP system and ensuring their smooth functioning. •Sharing the T&C plan & the sequence of operation with project engineers. •Preparing/updating commissioning tacking program for monitoring status of commissioning works Witness and verifies site installation, pre & post commissioning of the system/equipment performance based on the approved commissioning procedures in accordance with the design, contracts, plans, specifications and standards of various systems and equipment such e.g., HVAC Systems(CHW pipes chemical treatment, Air & Water balancing, CHW Pumps, Chemical dosing & pressurization units DX & CHW FAHU's, AHU's, FCU's & heat pumps ), Plumbing & Irrigation system , Building Ventilation & Smoke Management System, Firefighting Systems(Fire pumps, Clean agent system , fire suppression system, FHC, ZCV & Cause & effect matrix), & specialized Systems( Swimming pool, SPA & sauna , Jacuzzi & heat pumps) etc. •Documenting reports of progress made in project Projects •DAMAC HILLS by DAMAC properties LLC Dubai United Arab Emirates (2500 Villas different Clusters models, Paramount villas, Nine G+7 Clusters, Service stations ) •DAMAC Towers by Paramount Hotel Riyadh Kingdom of Saudi Arabia ( Two High rise building G + 33 & G + 37) •Tower 108 by DAMAC property development Dubai United Arab Emirates ( G+4P +28) •Ghalia Tower by DAMAC property development LLC Dubai United Arab Emirates ( G+4p +38) Education: •Bachelor of Technology Mechanical Engineering •Marks : 76.56% •Achievements& Rewards: Got a distinction certificate on four consecutive positions at university of engineering & technology Peshawar Got a laptop on a good performance from Higher Education Commission Pakistan •Modules Studied: Refrigeration & Air conditioning, Mechanical Engineering Design, Thermodynamics, Heat & mass transfer, Power plant, Mechanical vibration, Engineering Economics, Installation testing & maintenance of Machines, Fluid Mechanics & Hydraulics Machinery, Theory of Machines, Applied Mechanics, Strength of Materials, Basics Electronics, Mechatronics.

I am a Technical Office Engineer specializing in HVAC ductwork design, shop drawings, and technical solutions. I have experience in designing and preparing air duct systems, air outlets, ventilation s... Read more

I am a Technical Office Engineer specializing in HVAC ductwork design, shop drawings, and technical solutions. I have experience in designing and preparing air duct systems, air outlets, ventilation systems, exhaust and fresh air systems. I work with AutoCAD and can prepare accurate drawings suitable for fabrication and installation. I also have experience with duct sizing, material specifications, sheet metal thicknesses, TDF flanges, and coordination with site requirements. I focus on accuracy, practical solutions, and delivering professional work on time. I am interested in working with HVAC contractors, duct manufacturing companies, and engineering teams remotely, providing reliable technical support and high-quality drawings.

I am a professional HVAC Draftsman with 9+ years of experience in preparing accurate and site-ready HVAC drawings for residential, commercial, and industrial projects. I specialize in AutoCAD HVAC lay... Read more

I am a professional HVAC Draftsman with 9+ years of experience in preparing accurate and site-ready HVAC drawings for residential, commercial, and industrial projects. I specialize in AutoCAD HVAC layouts, ducting & piping drawings, equipment layouts, and shop drawings as per project specifications and international standards. I have worked closely with HVAC engineers, project managers, and site teams to deliver coordinated drawings with minimal revisions. I focus on clarity, accuracy, and timely delivery, ensuring drawings are practical for execution. I am available for freelance, short-term, or long-term HVAC drafting projects.

I am a mechanical engineer having seven years of experience in MEP field in Nepal and middle east. I have worked on HVAC design and installation in various commercial, residential and industrial proje... Read more

I am a mechanical engineer having seven years of experience in MEP field in Nepal and middle east. I have worked on HVAC design and installation in various commercial, residential and industrial projects. I have experience in high rise buildings also. I have good knowledge of AutoCAD MEP, Autodesk Revit MEP, Carrier HAP.

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventu... Read more

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventually becoming a Senior Contracts Manager taking charge of large HVAC installations. My Job description: • Duct design and workshop drawing plantroom layout. • Liase with client / consultants and architect on mechanical building services co-ordination and planning. • Workshop, site co-ordination and supervision. • Air-conditioning chilled, hot water piping schematics and layout details. • Tendering and estimating of jobs • Attend site and co-ordination meeting • Procurement of equipment • Monthly invoicing of contracts • Chilled water pipe calculations using the carrier design program. • Writing and compiling air conditioning maintanace manuals. • Design and manufacture of custom built chilled water air handling units for southern air conditioning contracts After 25 years I moved to a HVAC Design Consultancy Company as a Senior Design Engineer. My Job description • Budget proposal reports • Preliminary design reports • Hvac design. • Liase and architect on mechanical building services coordination and planning. • Attend plannining, site and co-ordination meetings. • Financial control up to final account. • Supervision of contract construction to final completion. • Suppervision of the hvac commissioning

1. I do Heat Load calculation in an excel sheet and derive the tonnage for the area to be airconditioned. 2. Do Duct design and Chilled water pipe design with Mcquay sizer software. 3. And do VRV/VRF... Read more

1. I do Heat Load calculation in an excel sheet and derive the tonnage for the area to be airconditioned. 2. Do Duct design and Chilled water pipe design with Mcquay sizer software. 3. And do VRV/VRF design with pipe routings. 4. Convert the design into Autocad 2D drawings as per the requirements. 5. Additionally I do Data Entry work in which I can convert any file format to MS word with reasonable speed and accuracy.

Experienced E.I.T. HVAC Engineer with hands-on expertise in mechanical and plumbing systems for residential, small, and large commercial projects. Currently working full-time in MEP engineering (Littl... Read more

Experienced E.I.T. HVAC Engineer with hands-on expertise in mechanical and plumbing systems for residential, small, and large commercial projects. Currently working full-time in MEP engineering (Littleton, MA area), I'm available evenings and weekends for freelance support including, but not limited to: -Revit MEP & AutoCAD drafting/modeling -HVAC load calculations (Manual J/D/S), equipment sizing, duct/piping layouts -Plumbing fixture counts, riser diagrams, and coordination -Clash detection, shop drawings, and redlines for architect/contractor review I focus on accurate, code-compliant (ASHRAE, IMC, NEC basics) deliverables that make your PE stamping process smoother. Proficient in Revit, AutoCAD, RHVAC/CHVAC, and Bluebeam for markups. Detail-oriented, fast turnaround, and committed to clear communication via Zoom/email. Open to ongoing support for repeat clients. Let's discuss how I can help with your next HVAC or MEP project

I am a Freelance MEP BIM Modeller with strong hands-on experience in Revit MEP, specializing in HVAC and Plumbing systems for residential, commercial, and mixed-use projects. I support global clients... Read more

I am a Freelance MEP BIM Modeller with strong hands-on experience in Revit MEP, specializing in HVAC and Plumbing systems for residential, commercial, and mixed-use projects. I support global clients by delivering accurate, coordinated, and code-compliant BIM models that align with international standards and project requirements. I have worked on projects following LOD 300–400, ensuring models are suitable for construction documentation, coordination, and execution. My focus is always on clarity, coordination, and constructability, helping consultants and contractors reduce rework, clashes, and delays.

My name is Allabaksh Bagali, I am a Mechanical Design Engineer, Having 3 years of experience in Design field. I define myself as a confident, creative person who constantly looks forward for improvisa... Read more

My name is Allabaksh Bagali, I am a Mechanical Design Engineer, Having 3 years of experience in Design field. I define myself as a confident, creative person who constantly looks forward for improvisation. Familiar with softwares like, Autocad 2D and 3D, Solid Works, Catia V-5, Solid Edge., and many more. I'm having an Experience in 2D drawing, 3D modeling, and visualization. First, you can send me your design requirements in terms of: Picture freehand sketch 2d file Second, you can get according to your request: 3d model for your design. 2d Manufacturing Drawing for each part. Assembly of multiple parts. 2d Assembly Drawing. 3D rendering parts Exploded & Collapsed view for your design. Animation video for your design. photorealistic view (Video & photo). Rendering. stl file -- (For 3d Printing). dxf file -- (For Laser or CNC Cutting). Demonstrated advanced CAD skills in creating new components/ assemblies and analyzing existing designs to implement mechanical improvements while reducing costs. Designed and implemented numerous engineering changes to increase trailer quality as well as efficiency using Solid Works CAD software. Produced detailed manufacturing drawings of heavy recycling equipment from specifications and parametric models using 3D CAD software. Analyzed and recommended CAD system resulting in greater flexibility, efficiency, and ability to outsource components. Provided Design and Documentation per ANSY Y14.5 and GD & T Added geometric dimensioning and tolerance (GD & T) to blueprints. As a HVAC Design Engineer Some of my Skills are: • Heat Load Calculation by manually and using HAP software following ASHRAE Standards. • Duct design by manually and using duct design software. • Air Distribution System by Velocity Reduction Method, Equal Friction Method and Static Regain Method following SMACNA Standards. • Chilled water piping design as per ASHRAE standard. • ESP Calculations for Fans & Blowers. • Evaporator cooling coil selection. • Ventilation design as per ASHRAE 62.1, 62.2 standards. • Stairwell pressurization system Designing. • Car Parking ventilation and fresh air system Designing. • Kitchen ventilation and fresh air system Designing. • Head Loss calculation for Primary & Secondary Pump system. • Chilled water pumps, condenser water Pumps Selection and power calculation. • Selection of Chillers, AHU’S, FCU’S, Exhaust Fan, Blower, Window AC, Cooling Tower, Desert Cooler and other Equipment’s. • VRV Machine placement, duct sizing, pipe design and routing. • Selection of VRV Indoor and Outdoor units with respect to diversity factor 120%. • Project Planning of various Hotels, Shopping Malls and Hospitals by using VRV system. • Tender drawing Preparation. • Mechanical Quantity Survey and Bill of Quantity (BOQ) preparation. As a HVAC Draughtman Some of my Skills are: • Preparation of Design & Shop Drawings. • Drafting of Duct Layouts for AHU, FCU, and Package Units. • Drafting of Roof Plan for HVAC Equipment. • Drafting of chilled water Piping Riser Diagram. • Detailed drafting of all HVAC details. • Drafting of HVAC Schematics for central air systems and chilled water systems. • Drafting of Refrigerant Piping, chilled water piping design. • Drafting of VRV & VRF systems. • Drafting of Pipe sizing and Riser diagram of VRV and VRF System.

Senior HVAC CAD Draughtsman | MEP Layouts, Shop Drawings & Coordination Expert With over 30 years of experience in HVAC and MEP drafting, I specialize in producing accurate, detailed, and standards-c... Read more

Senior HVAC CAD Draughtsman | MEP Layouts, Shop Drawings & Coordination Expert With over 30 years of experience in HVAC and MEP drafting, I specialize in producing accurate, detailed, and standards-compliant drawings using AutoCAD and Revit. I have successfully delivered HVAC shop drawings, coordination drawings, sections, schematic diagrams, and as-built documentation for residential, commercial, high rise building, hotels, hospitals and industrial projects across the Middle East and India. ✅ What I Can Help You With: • HVAC ducting and piping layout drawings • AHU/FCU equipment placement and section detailing • Coordination with Electrical & Plumbing (MEP) services • Schematic diagrams and single-line drawings • Revisions, redlines, and as-built documentation ✅ Tools I Use: • AutoCAD (2D) • Revit MEP • PDF markup and DWG to PDF conversions I’m committed to fast turnaround, clear communication, and quality deliverables that meet consultant standards. Let’s discuss your project — I’m ready to get started!

HVAC Draftsman with experience in preparing detailed HVAC drawings and layouts using AutoCAD. Skilled in ductwork layouts, equipment layouts, HVAC shop drawings, coordination drawings, and as-built dr... Read more

HVAC Draftsman with experience in preparing detailed HVAC drawings and layouts using AutoCAD. Skilled in ductwork layouts, equipment layouts, HVAC shop drawings, coordination drawings, and as-built drawings. I focus on accurate, clean, and professional drawings that meet project requirements and standards. I am detail-oriented, reliable, and committed to delivering quality work on time. Available for freelance HVAC drafting, MEP drafting, AutoCAD

25+years mechanical HVAC/Plumbing experience. Ability to do 2D, 3D and BIM coordination for all mechanical HVAC, Plumbing & Electric

25+years mechanical HVAC/Plumbing experience. Ability to do 2D, 3D and BIM coordination for all mechanical HVAC, Plumbing & Electric

Mechanical engineer (Cairo University) leading a small remote MEP BIM team. We produce construction-level MEP deliverables that pass consultant review the first time: - HVAC shop drawings: ductwork,... Read more

Mechanical engineer (Cairo University) leading a small remote MEP BIM team. We produce construction-level MEP deliverables that pass consultant review the first time: - HVAC shop drawings: ductwork, chilled-water and VRF piping, equipment schedules, sections and details - Plumbing and fire-fighting shop drawings and as-builts - Revit MEP models LOD 300 to LOD 500, including supports/hangers and asset data - Navisworks clash detection: federated models, clash matrix, clash reports and BCF issue logs - MEP quantity take-off for BOQs Selected work: - 4-floor medical facility: HVAC and chilled-water design sets, 36 AHUs, central plant and pump station modeled in Revit - School campus: 588 MEP sheets revised at LOD 500 to the approved design, with clashes resolved in Navisworks - Hospital coordination: 259 clashes reviewed and closed across floors 1–7 I also have hands-on HVAC design and equipment selection experience (Daikin VRV, chilled water), so drawings are checked as an engineer, not only as a drafter. Working style: per-sheet or per-m² pricing, your title block and standards, two consultant-comment rounds included, and clear weekly progress updates.