Hire the best Heat and Mass Transfer experts for your company

I am a senior Mechanical Engineering student from the University of Northwestern-StPaul seeking to expand my experience and challenge myself by entering into the realm of freelancing. I am very on for... Read more

I am a senior Mechanical Engineering student from the University of Northwestern-StPaul seeking to expand my experience and challenge myself by entering into the realm of freelancing. I am very on for table working with solid works and MATLAB and would love to partner with you to achieve your goals!

I am an experienced researcher with a strong aerospace and mechanical engineering background. My work has involved a range of analytical, computational, and experimental analyses. As a curious and amb... Read more

I am an experienced researcher with a strong aerospace and mechanical engineering background. My work has involved a range of analytical, computational, and experimental analyses. As a curious and ambitious individual, I am always seeking to learn and discover new things. Currently, I am employed as an Aerothermal LAB Engineer, researching the thermal analysis and management of un-conditioned avionics systems. Specifically, I am using the Design of Experiment technique to evaluate the thermal behavior of avionics systems under different altitude and Mach number conditions and verifying the resulting data through both analytical and computational analysis. Previously, I worked as a Research Assistant, performing analytical and computational analysis for the thermal management of avionics systems placed in conditioned bays and qualifying the thermal design of avionics according to MIL-STD-5400E for airworthiness. My area of interest include: • Thermo-fluids and heat transfer • Aerothermodynamics of the high-speed airborne platform • Computational and numerical fluid dynamics • Turbomachinery and power-plant design • Optimization I have proficient skills in: • ANSYS (thermal, fluids, structural, topology optimization, and design exploration) • SOLIDWORKS, Inventor, and Fusion 360 • MATLAB In addition to my research routine, I am studying various subjects including rocket propulsion and vehicle design, intelligent computation in engineering, and air-breathing engines.

Mechanical Design Engineer with 3+ years of experience specializing in product design & development, simulation, validation and optimization of industrial systems. I help engineering teams develop ma... Read more

Mechanical Design Engineer with 3+ years of experience specializing in product design & development, simulation, validation and optimization of industrial systems. I help engineering teams develop manufacturable, production-ready solutions by improving performance, reducing redesign cycles, and minimizing prototyping through engineering calculations, simulation-driven optimization, and practical design methods focused on manufacturing feasibility, reliability, and reduced development risk. ------------------------------------------------ 🔧 What I Help You Achieve ✅ Validate concepts before costly prototyping and testing ✅ Optimize weight without compromising safety or performance ✅ Ensure compliance with ISO, EN, IS, DIN, MIL standards ✅ Improve manufacturability, reliability, and system efficiency ✅ Reduce development time using simulation and engineering analysis ------------------------------------------------ 🛠 Core Engineering Design & Development Services 🔹 Design Optimization: Improve performance, weight, and compliance 🔹 End-to-End Design: From concept to production-ready systems 🔹 DFM/DFA: Design for efficient, manufacturable production 🔹 Reverse Engineering: Re-design for cost reduction and improvement 🔹 Advanced Simulation: FEA, CFD, NVH, and MBD validation ------------------------------------------------ 🏭 What systems do I design and validate? 🔸 Load-bearing structural and frame-based mechanical systems 🔸 Heavy-duty mechanical assemblies and machine structures 🔸 Precision-engineered components for dynamic loading applications 🔸 Equipment-level design involving actuation and support systems 🔸 Structural systems requiring high reliability and safety margins ------------------------------------------------ 📊 Why Choose to Work With Me ✔ Decisions backed by engineering calculations, simulation, and standards compliance ✔ Design documentation ready for review, validation, and certification workflows ✔ Manufacturing-focused approach that ensures real-world feasibility beyond CAD ✔ Clear, structured communication with no ambiguity in execution ✔ Risk-driven engineering that reduces redesigns, delays, and cost overruns ------------------------------------------------ 📩 What are you looking to build or optimize? If you need support with design optimization, validation, or production-ready engineering, feel free to reach out with your project details. I’ll review your requirements and outline a structured approach aligned with your technical goals, standards, timelines, and manufacturing constraints. ------------------------------------------------

I am a Computational Fluid Dynamics (CFD) Engineer and R&D Consultant specializing in advanced numerical simulation, multiphysics modeling, and physics-based engineering analysis. I help researchers,... Read more

I am a Computational Fluid Dynamics (CFD) Engineer and R&D Consultant specializing in advanced numerical simulation, multiphysics modeling, and physics-based engineering analysis. I help researchers, startups, and engineering teams transform complex fluid-flow and transport problems into reliable, interpretable, and decision-ready simulation results. My approach goes beyond simply generating CFD contours. I focus on understanding the underlying physics, selecting appropriate mathematical and numerical models, achieving reliable convergence, assessing mesh independence, validating results where reference data are available, and translating simulation outputs into meaningful engineering conclusions. My core expertise includes: • ANSYS Fluent & ANSYS CFX — advanced CFD, turbulence, multiphase and reacting flows • OpenFOAM & SU2 — customized CFD modeling, external/internal flows and numerical simulations • MFiX — gas-solid multiphase flow and fluidized-bed reactor modeling • COMSOL Multiphysics — coupled multiphysics, transport phenomena and electrochemical systems • Aerodynamics — NACA airfoils, vehicle aerodynamics, circular-cylinder flow, drag/lift and flow-field analysis • Heat Transfer — conjugate heat transfer (CHT), thermal-fluid analysis and heat exchanger performance • Mass Transfer & Chemical Engineering — reaction engineering, species transport, porous media and process systems • Multiphase Flow — fluidized beds, particle-fluid interactions, phase distribution and reactor hydrodynamics • Electrochemical Modeling — PVMR and coupled transport/electrochemical systems • MATLAB & Python — automation, numerical modeling, optimization, custom calculations and advanced post-processing I can support the complete CFD workflow—from geometry preparation and computational-domain development through meshing, boundary-condition definition, solver configuration, convergence monitoring, post-processing, validation, and technical reporting. My work is particularly suited to projects requiring more than a standard simulation: research studies, prototype development, design optimization, performance improvement, troubleshooting, scale-up, and simulation-driven engineering decisions. Whether you need aerodynamic analysis, multiphase reactor modeling, heat-transfer investigation, or a customized multiphysics simulation, I bring together fluid mechanics, heat and mass transfer, chemical engineering, numerical methods, and engineering judgment to deliver results that are technically rigorous and practically useful. I am open to collaborating on challenging CFD, multiphysics, and R&D projects where accurate physics and meaningful engineering insight matter.

I possess the strong technical skills in COMSOL Multiphysics, MATLAB, KissSoft and SolidWorks, coupled with effective problem-solving abilities. Driven to deliver precise and efficient engineering so... Read more

I possess the strong technical skills in COMSOL Multiphysics, MATLAB, KissSoft and SolidWorks, coupled with effective problem-solving abilities. Driven to deliver precise and efficient engineering solutions.

I am a Chemical Engineer with industrial experience in thermal power generation, chemical manufacturing, quality control, and coal processing. I currently work in power plant Operations, supporting... Read more

I am a Chemical Engineer with industrial experience in thermal power generation, chemical manufacturing, quality control, and coal processing. I currently work in power plant Operations, supporting process monitoring, engineering investigations, plant performance analysis, and technical problem-solving. My technical interests include process engineering, process design, simulation and numerical modeling. I work with Aspen Plus for chemical process simulation, COMSOL Multiphysics for transport phenomena and CFD modeling, and MATLAB for engineering calculations, numerical analysis and data visualization. My chemical engineering background includes mass and energy balances, thermodynamics, fluid mechanics, heat and mass transfer, separation processes, reactor engineering, process control, water treatment, and PFD/P&ID development. I can support projects involving process simulation, engineering calculations, process analysis, technical research, process flow diagrams, simulation-based troubleshooting, and engineering documentation. I value clearly stated assumptions, traceable calculations, and technically defensible results.

I completed diploma in mechanical engineering and I am pursuing Bachelors of engineering with mechanical stream. I have a knowledge on Solidworks and Catia v5 software.

I completed diploma in mechanical engineering and I am pursuing Bachelors of engineering with mechanical stream. I have a knowledge on Solidworks and Catia v5 software.

As a mechanical engineer and certified FMEA specialist, I excel in design, analysis, and reliability. With a strong foundation in technical subjects, I drive innovative solutions and optimize systems.... Read more

As a mechanical engineer and certified FMEA specialist, I excel in design, analysis, and reliability. With a strong foundation in technical subjects, I drive innovative solutions and optimize systems. What I Do Best: - Design and Analysis - Strength of Materials - Fluid Mechanics - Heat and Mass Transfer - FMEA (Failure Mode and Effects Analysis) - DFSS (Design for Six Sigma) Software Proficiency: - Fusion 360 - CATIA - ANSYS -Certified FMEA Specialist

Misikir Ahmed Shifaw is a mechanical engineering lecturer and researcher with a focus on thermal systems.Since 2014, I have been a lecturer at the Mechanical Engineering Department of Assosa Universit... Read more

Misikir Ahmed Shifaw is a mechanical engineering lecturer and researcher with a focus on thermal systems.Since 2014, I have been a lecturer at the Mechanical Engineering Department of Assosa University's College of Engineering. - Researcher working on projects in solar power evaluation, energy conversion, and heat and mass transfer. has a bachelor's degree in mechanical engineering from Jimma University and a master's degree in mechanical thermal systems engineering.

Career summary • B.E Mechanical with good knowledge of thermodynamics and designing. • Good knowledge of designing software AutoCAD, PRO E, ANSYS. • Experience of working on live projects using Aut... Read more

Career summary • B.E Mechanical with good knowledge of thermodynamics and designing. • Good knowledge of designing software AutoCAD, PRO E, ANSYS. • Experience of working on live projects using AutoCAD and PRO E, ANSYS. • Industrial training in captive power plant. • Worked on projects on refrigeration and air-conditioning, heat and mass transfer and diffusion augmented wind turbine. Academia • B.E Mechanical with 6.97 CGPA in 2014 from RGTU, Bhopal. • SSC with 70.41% in the year 2008 from Saraswati Vidyalaya, Nagpur. • HSC with 50% in the year 2010 from Dharampeth MP Deo Science College. • Certified Diploma holder in AutoCAD,ANSYS and PRO E from CADD Center. Technical skills • Worked as a project trainee with BIT Durg and BHALV for a project on Refrigeration and air conditioning. • Designed and developed Diffusion augmented Wind Turbine. • Designed and developed an apparatus for calculation of coefficient of heat conduction for different specimen materials. • Designed and developed a working model of K.E water pump. • Organized and delivered presentation on Heat and Mass transfer at MIT Indore and Surbhi Satyam Bhopal. • Certified designer from CADD Center Nagpur in AUTOCAD, ANSYS , PRO E. Project undertaken • Designed and developed Diffusion augmented Wind Turbine as major project. • Development of apparatus for calculation of coefficient of heat transfer as minor project. • Design and technical analysis of modified air cooler working on refrigeration cycle. • Designed and construction of K.E actuated water pump • Worked with BHALV consultancy as project trainee on technical as well as management oriented projects. Presentations and seminars • Presented a seminar on Heat and Mass Transfer at MIT Indore and Surbhi Satyam Institute of Technology Bhopal. • Organized and attended a seminar on project appraisal and finance at MANIT, Bhopal. • Organized and attended workshop on Robotics by e-dnect. Training attended • Minor training at D.B Denims on captive power plant and production process. • Major training with BHALV Consultancy and BIT Durg as project for Improved RC cycle for desert cooler. • Diploma in AutoCAD and PRO E, ANSYS from CADD Center. Extracurricular activities • Represented school in cricket and swimming. • Represented college in cricket. • N.C.C training for 2 years in school. • Secretary of placement committee of college. Personal details • D.O.B : 09/06/1992 • Address: RB-201 Bhagwager complex, Dharampeth, Nagpur. • Ph: 8087050830, Res: 07122553909. • E-MAIL : ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Results-driven Senior Mechanical and CFD Engineer specializing in the design and optimization of direct air capture (DAC) systems. Advanced user of ANSYS Fluent and OpenFOAM, with strong experience in... Read more

Results-driven Senior Mechanical and CFD Engineer specializing in the design and optimization of direct air capture (DAC) systems. Advanced user of ANSYS Fluent and OpenFOAM, with strong experience in multiphase flow modeling (Eulerian–Eulerian, VOF), wall film modeling, and population balance models (PBM) for particle and droplet dynamics. Proficient in species transport, mass transfer, and reactive flow simulations, including chemical reaction kinetics and gas–liquid interaction processes relevant to CO₂ capture. Experienced in applying turbulence models (k-ε, k-ω SST) and solving coupled heat and mass transfer problems to evaluate system performance, pressure drop, and capture efficiency. Contributed to the mechanical design and optimization of air contactors and reaction systems, translating CFD insights into practical, manufacturable solutions. Skilled in validating simulations through experimental testing and improving system efficiency, scalability, and reliability under real operating conditions.

Results-driven Senior Mechanical and CFD Engineer specializing in the design and optimization of direct air capture (DAC) systems. Advanced user of ANSYS Fluent and OpenFOAM, with strong experience in... Read more

Results-driven Senior Mechanical and CFD Engineer specializing in the design and optimization of direct air capture (DAC) systems. Advanced user of ANSYS Fluent and OpenFOAM, with strong experience in multiphase flow modeling (Eulerian–Eulerian, VOF), wall film modeling, and population balance models (PBM) for particle and droplet dynamics. Proficient in species transport, mass transfer, and reactive flow simulations, including chemical reaction kinetics and gas–liquid interaction processes relevant to CO₂ capture. Experienced in applying turbulence models (k-ε, k-ω SST) and solving coupled heat and mass transfer problems to evaluate system performance, pressure drop, and capture efficiency. Contributed to the mechanical design and optimization of air contactors and reaction systems, translating CFD insights into practical, manufacturable solutions. Skilled in validating simulations through experimental testing and improving system efficiency, scalability, and reliability under real operating conditions.

I'm a mechanical engineer working as a Design Engineer in the field of the wastewater treatment plants at 3W systems Lahore. I am an expert in design and simulation software like AUTOCAD, FUSION360, C... Read more

I'm a mechanical engineer working as a Design Engineer in the field of the wastewater treatment plants at 3W systems Lahore. I am an expert in design and simulation software like AUTOCAD, FUSION360, CFD AUTODESK, SIMULINK SIMULATIONS, REVIT, and many more. I Design a product/Tool/plant from the initial stage of Designing, Modelling, Animation, Analysis, and Simulation to the fabrication and testing of products and tools. I am an expert in 2D and 3D modeling and capable of solving problems related to engineering design. I have sound knowledge of Mechanical Engineering subjects. As a Mechanical engineer, I can implement engineering concepts to design innovative and ingenious products and tools for consumers. I have sound knowledge of subjects like Thermodynamics, Machine design, Fluid dynamics, Mechanics of machines, Materials Engineering, heat and mass transfer , power plant, mechatronics, production automation, and instrumentation, etc. I'm capable of carrying out technical research and delivering quality work in report writing as well.

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direc... Read more

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direct reduction plants, slurry transportation, cryogenic piping, etc.) and oil & gas projects (refineries, oil fields). Developed competences in most important piping codes (including ASME B31.1, ASME B31.3, EN-13480, etc.), and acquired proficiency in all aspects of static and dynamic pipe stress analyses (seismic, PSV transients, water hammer, harmonic vibrations, high-frequency vibrations, etc.) including generating critical line list, preliminary route studies and equipment arrangements, building load cases to satisfy code requirements, support design and analysis and fatigue assessments. In-depth knowledge of piping layout design using 3D software. In addition to pipe stress analysis and piping design, which is the primary field of expertise, during the work at the University of Belgrade (as PhD candidate), developed skills in pressure vessel analysis (ASME VIII-1, ASME VIII-2 and EN-13445), process equipment sizing, process design and optimization, heat and mass transfer calculations, fluid flow calculations (steady state and transient, including interaction with the stress analysis), CFD calculations, programming as well as advanced measurement and research techniques which has all proven extremely valuable in the practice. First author and co-author of several engineering and scientific research papers.

I work as a mechanical designer and developer for a world leading producer in medical industry since 2015. I am used to include relevant norms to my works such as explosion protection and medical clea... Read more

I work as a mechanical designer and developer for a world leading producer in medical industry since 2015. I am used to include relevant norms to my works such as explosion protection and medical cleanliness. I graduated as Master in Mechanical Engineering in Germany, Koblenz. My topics included mechanical design and the simulation of structural strain, heat transfer, fluid flow and mass transport.

Warm Greetings !!! . I have done Mechanical Engineering. If you are looking for help in Mechanical engineering tasks like problem-solving, semester projects, subject problem’ solutions then you are in... Read more

Warm Greetings !!! . I have done Mechanical Engineering. If you are looking for help in Mechanical engineering tasks like problem-solving, semester projects, subject problem’ solutions then you are in the right place. I can solve numerical problems, tasks, and projects related to Mechanical engineering subjects. I am here to assist you with all tasks related to Mechanical Engineering. I am having expertise in the following subjects and software.  Thermodynamics  Heat Mass Transfer  Power Plants  IC Engines  HVAC  Mechanics of Materials  Differential Equations  Vector and Calculus  Engineering Statics  Engineering Dynamics  Machine Design  Robotics and Controls  Industrial Management System  Production Operation Management  Finite Element Analysis  Mechanical Vibration  Energy, Resources, and Utilization  Engineering Statistics  Project Management SOFTWARE:  MATLAB /SIMULINK  ANSYS  SOLIDWORKS  AUTOCAD  LTSPICE  LABVIEW  ETAP  FEM  PROTEUS  CFD  HAP Thermodynamics: • First Law of Thermodynamics • Second Law of Thermodynamics • Zeroth Law of Thermodynamics • Enthalpy • Entropy • Rankine Cycle • Otto & Diesel Cycle • Brayton Cycle Heat & Mass Transfer: • Heat Transfer in one dimension • Heat Transfer in two dimensions • Heat Transfer through conduction, convection & radiation • Hydrodynamics • Methods of dimensional analysis • Lumped capacitance method --------------------------------------------------------------------------------- • Evaporation • Distillation & mass transfer • Absorption & Adsorption • Drying • Leaching & mass transfer • Liquid-Liquid Extraction • Cooling Towers • Ternary diagram in mass transfer • Separation process • Heat Transfer • Mass transfer • Thermodynamics Fluid Mechanics: • Reynold's number • Bernoulli's Equation • Equation of Continuity • Pascal's Law in Fluid Mechanics • Pumps design • Aerodynamics • Dimensional Analysis in Fluid Mechanics HVAC System & Design: • HVAC Heating & cooling load calculations • Duct Sizing & Routing • HVAC Schematics • HVAC design • AutoCAD layouts & drawings • Chiller Selection & Piping Design • Other Plumbing Design (Loops, Steam and Air) Mechanics of Materials: • Stress • Strain • Mechanical Properties of Materials • Axial Load • Torsion • Bending • Transverse Shear • Combined Loading • Stress Transformation • Strain Transformation • Design of Beams and Shafts • Deflection of Beams and Shafts • Buckling of Columns Finite Element Analysis: • Beam and Spring System • Truss’s structure • Frame Analysis • Minimum potential energy principle • Galerkin method • Transformation of Element Equations from Local to Global CS • Eigenvectors and eigenvalues of the stiffness matrix • Iso-parametric Formulation • FEA Simulation • FEA in Fluid Dynamics • 2D and 3D structure • FEA question solution with MATLAB • Model Creation on ANSYS Computational Fluid Dynamics: • Mesh generation in ICEM, FLUENT MESHING MODE, ANSYS WORKBENCH (Modules for CFD) • The structured and unstructured meshing of complex geometries for CFD analysis • CFD analysis using Ansys Fluent for External and Internal flows • Fluent and Static Structural Analysis in order to carry Fluid Solid Interaction (FSI) simulations (a type of combination of SS and CFD analysis or several others) • Dynamic/ Adaptive Meshing to incorporate moving geometries within fluid interactions for CFD analysis • UDF compilation and Application on Geometries while analyzing computational fluid dynamics Mechanical Vibration: • Free Vibration • Forced Vibration • Harmonic Vibration • Viscous Damping • Modeling and Energy Methods • Stiffness • Stability • Coulomb Friction • Harmonic Excitation of damped and undamped systems • Alternate Representation • Base Excitation • Forced Response • Multiple Degree of Freedom Systems • Eigenvalues and Natural Frequencies • Modal Analysis • Mode Shapes • Lagrange’s Equation • Eigenvalue Problem for Vibration • Vibration Absorbers • Vibration Isolation Control System: • Feedback & Control System • Open loop & Close Loop Control System • Transfer Function • Block Diagram Model • Signal Flow Graphs • State Space • Nyquist Plot • Body Plot • PD, PI, PID Controllers Design • Root Locus • Controller Design & MATLAB Simulink • Laplace and Inverse Laplace Transform • Transfer Function • Steady State Error and Transient Response • Lead/Lag Compensator Design • Modelling in Time/Frequency Domain • Design & Stability of Control Systems • Phase & Gain Margins • Advanced Control System • System Modelling

Hello...., My name Mihir... Are you seeking a Static Equipment Mechanical Design Engineer capable of providing precise, safe, and code-compliant designs for critical industrial equipment? I offer 12 y... Read more

Hello...., My name Mihir... Are you seeking a Static Equipment Mechanical Design Engineer capable of providing precise, safe, and code-compliant designs for critical industrial equipment? I offer 12 years of experience as a Mechanical Design Engineer specializing in the engineering and design of static equipment. My expertise includes pressure vessels, heat exchangers, mass transfer equipment, reactors, columns, storage tanks, shell-and-tube exchangers, separators, and various process equipment utilized across the oil and gas, petrochemical, chemical, water treatment, and power industries.

Highlights (Technical strength & Skills) • Test reports preparing & reviewing for MEP Systems • HVAC Air balancing • Duct design & sizing • Thermal load calculations • HVAC System D... Read more

Highlights (Technical strength & Skills) • Test reports preparing & reviewing for MEP Systems • HVAC Air balancing • Duct design & sizing • Thermal load calculations • HVAC System Design & selection • Preventative maintenance • MEP Testing & Commissioning • System diagnostics • Primavera P6 & MS project • Carrier HAP 4.51 • MS Word, Excel & power point • Auto CAD • International standards ( ASHRAE, CIBSE, NEEB, NFPA,) • Technical writing Academic(strength & skills) • Machine design problem solving • Heat transfer • Refrigeration & air conditioning • Thermodynamics • Fluid Mechanics • Mathematics General (Strength & skills) • MS office ( word & excel) • File exchange word to pdf & pdf to word • Primavera p6 • Data Entry • Report writing • Technical writing Skills & Experience: (International Experience: United Arab Emirates & Kingdom of Saudi Arabia) •Preparing & Reviewing Reports, Tender Documents, Engineering Calculations with the source of knowledge, specifications, budgeting and literature for HVAC Projects •Design & calculation of cooling/heating loads of commercial & residential buildings by the use of computer software’s like Carrier HAP (Hourly Analysis Program) • FAHU's, AHU's ,DX & Decorative units Selection. • ventilation & smoke control system design & calculation. • Design & Calculation & sizing of airflow ducts for commercial & residential projects. • HVAC System selection for commercial & residential projects. •Data fixation including HVAC design duty parameters. •Scrutiny and comparing of Shop Drawings with the design and Tender drawings •Checking of plans, drawings and quantities for accuracy of calculations. • preparing of ITPs, Technical submittals & Method of statement for Testing & commissioning & Air balancing. •Preparing & reviewing Testing & Commissioning method statement & O & M Manual for MEP works. •Evaluating designs of HVAC systems, plumbing & drainage, irrigation, swimming pool & fire safety and building automation systems. •Creating and carrying out test procedures for MEP system and ensuring their smooth functioning. •Sharing the T&C plan & the sequence of operation with project engineers. •Preparing/updating commissioning tacking program for monitoring status of commissioning works Witness and verifies site installation, pre & post commissioning of the system/equipment performance based on the approved commissioning procedures in accordance with the design, contracts, plans, specifications and standards of various systems and equipment such e.g., HVAC Systems(CHW pipes chemical treatment, Air & Water balancing, CHW Pumps, Chemical dosing & pressurization units DX & CHW FAHU's, AHU's, FCU's & heat pumps ), Plumbing & Irrigation system , Building Ventilation & Smoke Management System, Firefighting Systems(Fire pumps, Clean agent system , fire suppression system, FHC, ZCV & Cause & effect matrix), & specialized Systems( Swimming pool, SPA & sauna , Jacuzzi & heat pumps) etc. •Documenting reports of progress made in project Projects •DAMAC HILLS by DAMAC properties LLC Dubai United Arab Emirates (2500 Villas different Clusters models, Paramount villas, Nine G+7 Clusters, Service stations ) •DAMAC Towers by Paramount Hotel Riyadh Kingdom of Saudi Arabia ( Two High rise building G + 33 & G + 37) •Tower 108 by DAMAC property development Dubai United Arab Emirates ( G+4P +28) •Ghalia Tower by DAMAC property development LLC Dubai United Arab Emirates ( G+4p +38) Education: •Bachelor of Technology Mechanical Engineering •Marks : 76.56% •Achievements& Rewards: Got a distinction certificate on four consecutive positions at university of engineering & technology Peshawar Got a laptop on a good performance from Higher Education Commission Pakistan •Modules Studied: Refrigeration & Air conditioning, Mechanical Engineering Design, Thermodynamics, Heat & mass transfer, Power plant, Mechanical vibration, Engineering Economics, Installation testing & maintenance of Machines, Fluid Mechanics & Hydraulics Machinery, Theory of Machines, Applied Mechanics, Strength of Materials, Basics Electronics, Mechatronics.

Hello, my name is Yunus Emre. I am Master’s Degree Civil Engineer and Architecture by profession with 20+ years of experience. I can serve you with full architectural and engineering solutions all in... Read more

Hello, my name is Yunus Emre. I am Master’s Degree Civil Engineer and Architecture by profession with 20+ years of experience. I can serve you with full architectural and engineering solutions all in one place. I can start designing from your ideas and assist you for all your needs like architectural design and detailing, bim 3d modeling, structural analysis, design, detailing and 3d interior, exterior rendering presentations. I can also make budgeting, bill of quantities (boq), cost estimation studies for your projects. I use Autocad 2D/3D, Revit Architecture, Blender, SketchUp, 3D Studio Max, Etabs, Sap2000, Photoshop and many other softwares. Trust and quality are very important for me. My goal is to finish the task leaving a 100% satisfied client. Contact me and let's get started. WHY CHOOSE ME? ✔ Good communication skills ✔ High-quality and fast delivery ✔ Instant customer care service

I'm a mechanical design engineer who has worked in various domains like automotive, automation and new product development. I am confident in the skills that I can take upon a variety of design chall... Read more

I'm a mechanical design engineer who has worked in various domains like automotive, automation and new product development. I am confident in the skills that I can take upon a variety of design challenges and go beyond the expectations of my clients.

18 year experience in various mechanical design such as Heating, Ventilation and Air-Conditioning (HVAC), Fire Protection systems (includes fire sprinkle system and FM-200), Plumbing, Drainage systems... Read more

18 year experience in various mechanical design such as Heating, Ventilation and Air-Conditioning (HVAC), Fire Protection systems (includes fire sprinkle system and FM-200), Plumbing, Drainage systems, Irrigation systems, Water Supply Systems, Piping system and Lifting equipment.

Wiring Harness Design Consultant with 14+ years of experience in designing electrical distribution system schematics and harness drawings. I am also the Managing founder and Technical Lead of EDS Mast... Read more

Wiring Harness Design Consultant with 14+ years of experience in designing electrical distribution system schematics and harness drawings. I am also the Managing founder and Technical Lead of EDS Master, a consulting firm that provides electrical design engineering solutions for the automotive sector and heavy machinery industry. I leverage my expertise in electrical layouts, circuit design, and CAD engineering to deliver high-quality and cost-effective projects for clients across the globe.

Hello, I am a Mechanical Engineer specialized in product design for manufacturing. I help startups, businesses, and individuals turn ideas into production-ready designs for 3D printing, CNC machining,... Read more

Hello, I am a Mechanical Engineer specialized in product design for manufacturing. I help startups, businesses, and individuals turn ideas into production-ready designs for 3D printing, CNC machining, laser cutting, and injection molding. I don’t just create CAD models, I design parts that actually work in real-world manufacturing. 🔧 What I Offer: Product design & 3D CAD modeling (SolidWorks, AutoCAD) Design for Manufacturing (DFM) 3D printing (STL optimized) CNC machining (STEP/IGES) Laser cutting (DXF) Injection molding-ready designs Technical & orthographic drawings 💡 Why Choose Me: Mechanical Engineering background Manufacturing-focused design approach Clean, accurate, and production-ready files Clear communication and quick turnaround Suppose you have an idea, sketch, or concept. I can turn it into a manufacturing-ready CAD file. Thanks Best Regards, Rehmat Ali

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical devic... Read more

I am a London-based product design engineer with an amazing track record of leading high-level complex products in a range of industries. I am currently COO and Head of Engineering at a medical device startup developing breakthrough cancer staging medical technologies. Here I work with leading scientists at MIT to revolutionize anatomical pathology. I have experience in a range of industries including: - Medical - Optical - Consumer Electronics - High End Consumer Products - Low-Cost Consumer Products - Power Tools I have managed complex products from an idea all the way through to mass manufacturing with strong skills in all areas of product development. Key Skills Include: - Design For Manufaturing -- CNC -- Sheet metal -- Injection Molding -- 3D Printing - Plastic Part Design - Design for Assembly - 3D Modelling - Regulatory - Electonic Prototyping - 3D Printing - Photorealistic Rendering My aim is to use CadCroud to keep my lesser practiced creative skills alive that I don't get to use as often day today. I am also happy to give advice to anyone new to the difficult product development process, just a single conversation could be the difference between a costly failed project and an industry-leading product.

I am a Mechanical CAD Designer and CNC Programmer with over 4 years of experience in CAD/CAM programming and 8+ years of hands-on machining experience. My background in both machining and CAD/CAM enab... Read more

I am a Mechanical CAD Designer and CNC Programmer with over 4 years of experience in CAD/CAM programming and 8+ years of hands-on machining experience. My background in both machining and CAD/CAM enables me to create designs that are not only accurate but also practical, efficient, and ready for manufacturing. I specialize in developing high-quality 3D mechanical models, 2D manufacturing drawings, CNC milling toolpaths, and production-ready CAD files. My practical knowledge of machining processes, tooling, workholding, tolerances, and manufacturing requirements allows me to design parts that can move smoothly from concept to production. My Expertise 3D Mechanical CAD Modeling Mechanical Part & Assembly Design AutoCAD 2D Drafting Manufacturing & Fabrication Drawings Mastercam CNC Programming CNC Milling Toolpaths (2D & 3D) PDF, Sketch & Image to DWG/DXF Conversion Engineering Drawings for Manufacturing Design for Manufacturing (DFM) Production-Ready CAD Documentation Why Work With Me? I understand both the design office and the machine shop. My experience in machining helps me identify potential manufacturing issues early, resulting in designs that are practical, accurate, and optimized for production. I am committed to: Delivering accurate and detail-oriented work. Maintaining clear and professional communication. Meeting agreed deadlines. Providing reliable support throughout the project. Whether you need a mechanical component designed from scratch, professional manufacturing drawings, CNC toolpaths, or existing sketches converted into production-ready CAD files, I am dedicated to delivering high-quality results that meet your project requirements.