Hire the best Embedded Linux experts for your company

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded... Read more

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded processors and communication interfaces, as well as advanced signal and sensor integration. Key Skills: - Embedded processors: STM32, ESP32, TMS32, DM3730, DA14583, LoRa, nRF52, Arduino, Atmega, PIC, RAK4, SIM7 - High-speed routing up to 24 Gbps PCIe, SDI - Memory interface: SRAM, DDR, DDR2, DDR3, DDR4 - Communication: PCIe, SATA, HDMI, Ethernet, USB, UART, SPI, I²C, CAN, RS485/422, RS232C -Wireless: Bluetooth, Wi-Fi, Z-Wave, Zigbee, RFID Sensor integration: ECG, PPG, HRM, SPO₂, CO₂, Temperature, PIR, Touch, Pressure - Simulation tools: MATLAB, Proteus, Multisim, HyperLynx. My Advantages - Stable and reliable design - Fast and precise development - Deep industrial understanding - Safety and ergonomic awareness - Cost-effective manufacturing insight - Strong collaboration experience - High-quality prototype to product - Commitment to perfection Over a decade of successful embedded design experience, completing numerous projects across industrial, medical, and IoT applications. Proven ability to deliver top-quality results in minimal time through strong technical insight, practical design sense, and effective client collaboration.

I have spent the past 35+ years providing Architectural design,modeling, CAD support, BIM Management, Coordination, Project Management and other aspects of a project from concept to design to construc... Read more

I have spent the past 35+ years providing Architectural design,modeling, CAD support, BIM Management, Coordination, Project Management and other aspects of a project from concept to design to construction. My roles have included designer, CAD Manager, IT Manager, BIM Manager in various AE firms and national construction companies.

• (2024) 1st Flow Energy Solutions GmbH, Umkirch, Germany. Position: Design Engineer Experience: design and development of flow plates for vanadium redox flow batteries. • (2023) Ernst Knoll Feinmech... Read more

• (2024) 1st Flow Energy Solutions GmbH, Umkirch, Germany. Position: Design Engineer Experience: design and development of flow plates for vanadium redox flow batteries. • (2023) Ernst Knoll Feinmechanik GmbH, Umkirch, Germany. Position: Design Engineer Experience: design and development of series components for special machinery. • (2017) Maquiriegos Esagar, Caracas, Venezuela. Position: Services Engineer. Experience: design, installation and maintenance of irrigation systems. • (2016) Design and construction of a prototype for the transport of objects needed during trips by bike, Caracas, Venezuela. Results: prototype of the structure of a multifunctional trailer for bikes. • (2015) Improvements of food dehydrators for the community of El Paují, Bolívar state, Venezuela. Experience: design of a food dehydrator using solar energy. • (2015) Recicrear, Caracas, Venezuela. Experience: design and construction of wallets from recycled material.

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My dai... Read more

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My daily job is investigation and development of new technologies. You can benefit from my expertise if you are in need of innovation or you have an idea that nobody can't make it real. I provide better technologies, better ideas and better problems solving. I am a skilled electronic engineer, multi-language developer, inventor, circuit designer. I have a background of Linux/BSD servers admin and networks admin. My work ranges from developing space-grade electronic prototypes, deploying and managing large-scale data networks of IoT sensors to autonomous robotics design with AI. I love to get involved in projects with different technologies. I am constantly updated on new technologies and electronic trends. I am a good advisor on the best technologies you should integrate into your next project. I have a company about IoT sensors, custom circuit designs, autonomous robotics, and web API for data gathering and visualization through web services. One of my most relevant projects was the design of the avionics for a space satellite. During the development, I was able to integrate the top-quality components and adopt the most refined engineering methodologies. I am an outstanding project manager with excellent orders logistic, time scheduling, and employee management. I know how to design electronic circuits and how to optimize the PCB layouts for to pass compliance tests for the emission certification as per CE, FCC, UL regulations. My experience includes: -nRF52/53/54 bluetooth BLE chips from Nordic -nRF9161/51 LTE SoC with CAT-M1 and NB-IoT -ARM Cortex-M33 specialist -ultra low power IoT designs with LTE, LoRa, Bluetooth and 5uA during sleeping -IoT designs with sensors of any type -IMU fusion and motion sensors -Beaglebone Black, Raspberry PI, ODROID -Arduino, Teensy3.2+3.6+4.x, Spresense -design and firmware with NXP, STM32, Nordic, TI, Silabs ARM Cortex-M MCUs -Multilayer PCB layout designs -XBEE, Bluetooth BLE, WIFI, LTE -LoRa and LoRaWAN transceivers design with Semtech RF chips -Iridium sat embedded modems -Autonomous robots, ocean and ground -Wearable devices -Tracking devices with sensor -Solar panels design -Lithium battery rechargers with safety -Industrial heavy duty protocols and power electronics -Encoders and motor drivers -Automotive electronics design -Aerospace electronics, RF and avionics design -Machine learning on MCUs -CAN bus, RS485, 5-20mA protocols -Audio MIDI instruments design -DSP algorithms -Heterogeneous multicore architectures -JTAG, SWD, GDB, openocd, Segger J-Link -Jetson platforms from NVIDIA -Allied Vision cameras -CAD with FEM analysis -3D printed enclosures for electronics Software and firmware programming: -Zephyr RTOS on Nordic RF SOCs -Nuttx RTOS -custom embedded Linux OS with Yocto project -Linux OS (Raspberry PI, ODROID, ARM based) and servers: Ubuntu, Debian and ArchLinux -FreeBSD, NetBSD on embedded boards and servers -AI, machine learning, TinyML specialist -computer vision on NVIDIA Jetson boards. -PX4, MAVLINK, ROS and GAZEBO simulator -Python, C, C++, LUA, Perl -REST API via HTTPS and authentication -MATLAB, Octave, NumPy I can create custom RF circuits and antennas on PCB. I can run the required math and to provide the best impedance matching network. I can test the final RF circuit with my Vector Network Analyzer (VNA). I am specialist of IoT/LoRa/LTE frequencies. I do microelectronics SMT soldering and prototyping in my lab. I place components using a professional microscope. I mount components with dimensions down to 0402 or BGA type. I have good contacts in the industry for PCBs fabrication and for the massive production in different parts of the world. I do machine learning (AI) in microcontrollers installing into the firmware the inferences. I do training in the cloud. I am a specialist of TinyML on ARM Cortex-M33 MCUs. I am honored to be a returning, invited speaker for the BSD foundation, where I discuss BSD operative systems worldwide at annual conventions in Europe and North America. I have a private git server to manage all the files of my customers as remote accessible repositories so they can track the status on a daily basis. My monthly flat rate is 8000 Euro. I begin to work with an initial upfront payment, fully released of about the 30% of the total value of the project. I prefer to work at long term projects to take care of all the features and all the design process. I am also available for preliminary feasibility studies of new products with a final PDF report. I am the owner of a legal registered business in Spain to pay taxes and to provide all the engineering services. All the PDF invoices I send are declared and legal. Local EU regulations impose to send the PDF invoice to my customers to document the funds received.

Founded in 2013 Integra Sources has already completed more than 100 projects making happy more than 40 clients. Our customers have raised more than $1 000,000 on Kickstarter in total. We offer full... Read more

Founded in 2013 Integra Sources has already completed more than 100 projects making happy more than 40 clients. Our customers have raised more than $1 000,000 on Kickstarter in total. We offer full-cycle hardware and software development services delivering the best engineering solutions for you. ⭐Our core services ✔ Embedded Hardware Development (PCB design * FPGA design * Preparing for manufacturing * Certification * Prototyping) ✔ Embedded Software Development (Firmware development * Board support package development * Prototyping with SBC * RTOS) ✔ IoT Solutions (AWS IoT * Azure IoT * Industrial IoT * Industry 4.0 * M2M * Predictive maintenance * Digital transformation) ✔ Kernel and Driver Development (Windows * Linux * macOS * Android) ✔ Custom Software Development (Cross-platform software development * Native desktop software * System software) What else we can do ✔ Computer Vision Development (Image and video processing * Face recognition * Edge computing * Object tracking) ✔ Machine Learning and Artificial Intelligence (Recommender systems * AI-based applications * Neural networks * Data analytics * OCR) ✔ Robotics (Flying drones * Robots on wheels * Autonomous movement * Applications for Robot Operating Systems (ROS) ✔ Mobile Application Development (iOS application development * Android application development * Mobile apps for IoT * Cross-platform app development * Testing * App store submission) We create products for a number of industries including healthcare, logistics, asset tracking, education, industrial automation, consumer electronics, entertainment, and other fields. Innovative problem-solving skills, in-depth expertise and enthusiasm toward work make us a strong partner in the development services we provide. We are happy to work on your projects solving challenging tasks and getting excellent results📈

Innovative Electrical Engineer with over 5 years of experience in embedded systems, PCB design, and IoT hardware. Specialized in analog/digital circuit design, low-noise PCB layout, and prototype-to-p... Read more

Innovative Electrical Engineer with over 5 years of experience in embedded systems, PCB design, and IoT hardware. Specialized in analog/digital circuit design, low-noise PCB layout, and prototype-to-production engineering using Altium Designer, STM32, and ESP32 platforms. Delivered high-performance, reliable systems across automotive, industrial, and consumer applications. A fast learner and passionate researcher in semiconductor technologies and AI-assisted electronics, consistently turning complex technical concepts into practical, high-impact solutions.

Our team offers services on the full range of the development: - requirement engineering - hardware design - hardware production (PCB, PCBA) - firmware development - PC-side/web access to th... Read more

Our team offers services on the full range of the development: - requirement engineering - hardware design - hardware production (PCB, PCBA) - firmware development - PC-side/web access to the device Our team has experience with: - microcontrollers (8- and 32-bits) - microprocessors running embedded Linux - building from COTS modules or building custom PCBs - programming bare metal firmware or embedded Linux - integrating wireless or wired networks - special purpose file systems - interfacing sensors - networking (from Layer 3 to custom application protocols)

I am a Senior FPGA and Embedded Systems Engineer with extensive experience designing and implementing high-performance digital systems using Verilog, VHDL, and SystemVerilog. My background includes RT... Read more

I am a Senior FPGA and Embedded Systems Engineer with extensive experience designing and implementing high-performance digital systems using Verilog, VHDL, and SystemVerilog. My background includes RTL architecture design, IP core development, timing closure optimization, and full FPGA implementation flow using Xilinx Vivado and Intel Quartus toolchains. I have delivered FPGA-based solutions for signal processing, sensor integration, high-speed communication interfaces (I2C, SPI, UART, AXI), and SoC-based systems including Zynq platforms. My expertise covers simulation and verification (ModelSim/Questa), hardware debugging, embedded Linux integration, and system-level hardware/software co-design. I specialize in translating complex system requirements into efficient, resource-optimized FPGA architectures while ensuring clean timing, scalability, and long-term maintainability. I am experienced in working with cross-functional teams and delivering production-ready designs with clear documentation and validation reports. My strengths include problem-solving under constraints, structured design methodology, and delivering reliable hardware solutions on schedule

I am a software engineer specializing in IoT, embedded systems, and .NET-based backend development. I work on both: ✔ Vehicle & telemetry systems (CANbus, IoT, real-time data) ✔ Web & backend applica... Read more

I am a software engineer specializing in IoT, embedded systems, and .NET-based backend development. I work on both: ✔ Vehicle & telemetry systems (CANbus, IoT, real-time data) ✔ Web & backend applications (.NET, APIs, dashboards) I can help you with: - .NET Web API development - Real-time systems (SignalR, live dashboards) - IoT data pipelines (device → cloud → UI) - CANbus data processing and telemetry systems - Mobile-integrated backend systems I have real-world experience in electric vehicle projects, building telemetry and monitoring systems from hardware to cloud. Tech stack: C#, .NET, ASP.NET Core, React, Python, Azure, SignalR, CANbus, Linux I combine hardware-level understanding with modern software development — which allows me to build complete end-to-end systems.

18+ years of experience in electronic design. 100+ major design projects delivered. 200+ happy clients served. Whatever your electronic design needs are, reach out for a quick chat, you will not regre... Read more

18+ years of experience in electronic design. 100+ major design projects delivered. 200+ happy clients served. Whatever your electronic design needs are, reach out for a quick chat, you will not regret it! What to expect: ✅Top quality design that not only meets and exceeds your requirements but can also handle those unexpected conditions that make quality products stand out from the rest. ✅Rigorous design test and measurement that leaves nothing unchecked, keeping in mind not only your interests but also those of your end customers. ✅A design that is optimized and ready for manufacturing with parts readily available. ✅Exhaustive documentation and support so you can make best use of all deliverables. ✅A flexible service that can take care of all phases in the design and prototyping process or just those parts that you prefer. ✅Long-term availability for changes, revisions, and support. ✅Above all, an honest and friendly collaboration that you can trust. I invite you to reach out to discuss your project's unique needs. Regardless of your technical background, I am here to transform your product idea into a tangible reality, employing the most efficient and cutting-edge technology. My services extend beyond design, offering assistance in defining complete project requirements, recommending suitable technology, and guiding your product to production. I can also connect you with reliable suppliers and provide unwavering technical support throughout the entire process. As a full-time freelance engineer, having worked with clients from all over the world in very diverse applications, I’ve been able to gain a broad experience in electronic design. The designs I’ve produced over the years range from the simplest of designs to very complex high-density designs at the cutting edge of technology. I have gained experience with a variety of microcontrollers, processors, sensors, interfaces, protocols, and design architectures. I’ve also been able to utilize a variety to PCB technologies ranging from multilayer rigid, HDI, flexible, rigid-flex, metal-core, as well as exotic materials such as stretchable PCB. Throughout the years I’ve also invested significantly in a spacious lab and equipment for both prototyping (including pick-and-place, reflow oven and advanced JBC soldering equipment) as well as professional test and measurement equipment (including oscilloscopes, spectrum analyzers, VNA, bench meters, electronic loads, waveform generators, ECG simulator, thermographic imaging, and data loggers), all from reputable brands (Keysight, Teledyne-Lecroy, FLIR, Fluke, Tektronix, Pico,…). My vision is to produce top quality designs with a ‘whatever it takes’ attitude and am willing to invest effort and financially in ensuring that I am well equipped to do so. Some of the specific experiences include: Software tools: Altium Designer (my primary EDA), KiCad, Eagle, Proteus; SolidWorks; Ansys, Keysight-ADS, COMSOL; VS Code, Visual Studio, PyCharm, IntelliJ; Keil MDK Arm, GCC, IAR, CodeComposer, Microchip Studio; Quartus Prime, Xilinx ISE; Programming languages: Embedded C, C++, C#, Python, Rust, Java, VHDL, Bash scripts, PHP, javascript… Microcontrollers/SoC: STM32 (often preferred), ATSAM, STM8, nRF5x (often preferred for BLE applications), EPS32, CH32 (RISCV), C2000, CC2642, CC13xx, PIC16/18, AVR, MPS430, RP2040, i.MX, A20/50, RK35xx, MAX78000, … Protocols/Buses: RS485/422, USB, UART, SPI, I2C, CAN, LVDS, DDR; Modbus, NMEA2000, MQTT, … Common design features: - BLE / Wi-Fi with custom PCB trace antenna, fully simulated and tuned on prototypes. - USB charge circuit for Li-Ion battery, including fast charging. - Battery protection circuits and cell balancing. - PoE source/device/injector designs with necessary protocol handshakes. - ARM embedded processor design running embedded Linux system. - RTD measurement circuits, 3/4 wire, 24 bit, PGA and filtering. - ECG, EOG, EEG monitoring wearable designs. - IMU motion tracking with sensor fusion and quaternion streaming. - GNSS location tracking, including high precision RTK modes. - Audio capture, filtering, processing, and amplification. - DC/DC converters in various topologies including buck, boost, buck-boost, SEPIC, CUK, H-Bridge, cascaded, multi-phase. AC/DC converters (flyback, feed-forward, …). DC/AC inverters, BLDC control… - LED driving with attention to color rendering and thermal management. - Solar MPPT controller. - UHF long range wireless designs, LoRa, Sigfox. Cellular interfaces 4G, LTE, NBIoT, LTEM. My commitment to excellence, innovation, and collaboration has been the cornerstone of my career. I look forward to the opportunity to bring your vision to life, leveraging my extensive skill set and passion for electronic design. Feel free to contact me to embark on a successful journey together.

I am a highly skilled Electronics and Embedded Systems Engineer with a specialized focus on high-speed PCB design and system-level hardware integration. My expertise lies in bridging the gap between c... Read more

I am a highly skilled Electronics and Embedded Systems Engineer with a specialized focus on high-speed PCB design and system-level hardware integration. My expertise lies in bridging the gap between complex digital logic and physical hardware, having successfully designed and prototyped sophisticated multi-processor platforms and IoT solutions. ​Core PCB Design Competencies ​My technical proficiency spans the entire hardware development lifecycle, from initial schematic capture to manufacturing and prototyping workflows. ​High-Speed Interface Design: I have extensive experience routing and integrating high-speed protocols including PCIe, DDR3/DDR4, USB 3.0, Gigabit Ethernet, and MIPI CSI/DSI. ​Multi-Processor Architectures: My work includes designing complex boards that integrate CPLDs (EPM240) for deterministic IO, STM32 microcontrollers, and RK3568 Linux SBCs. ​RF & Wireless Integration: I specialize in the integration of LoRa (SX1276), GPS, Wi-Fi, and BLE modules, ensuring optimal antenna performance and signal integrity. ​Design Tools: I am certified and proficient in industry-standard EDA tools, including Altium Designer, KiCad, and EasyEDA. ​Proven Project Impact ​Universal Control Platform (2025): Acted as the system architect for a high-performance board featuring Hailo-8 AI accelerators via PCIe and complex MIPI camera interfaces. ​IGURU Farm GPS Tag System: Led the electronics design for LoRa-enabled livestock tracking collars, managing everything from PCB layout and antenna integration to rigorous field testing. ​Payment & Security Systems: Developed robust hardware for NFC/RFID payment terminals, implementing secure transaction logging to SPI flash and reliable network uplinks. ​With a focus on reliability and innovation, I leverage advanced prototyping workflows including JLCPCB integration to deliver high-quality electronic systems for industrial, agritech, and security applications.

SUMMARY Electronics Engineering Technologist with several years of industry experience & training, OACETT certification, and various achievements, scholarships & awards. EMPLOYMENT Logical Innov... Read more

SUMMARY Electronics Engineering Technologist with several years of industry experience & training, OACETT certification, and various achievements, scholarships & awards. EMPLOYMENT Logical Innovations Network (LIN) – PCB Design Engineer & Founder - London ON  Provides ‘state-of-the-art’ PCB design services for industry clients. Vision Circuit Technologies – PCB Layout Designer - Ottawa ON  Revised schematics & layout designs for high-technology clients. W.R. Davis Engineering – Electronic Engineer - Ottawa ON  Built several MCU’s & power cabinets for a Segmented Wave Generator in South Korea. Absopulse Electronics – Electronic Technologist - Ottawa ON  Manual placement & soldering of Power Supply & Light Conversion circuits. Mentor Graphics – Applications Engineer - Mississauga ON  On-site Consultant & Technical Support Adviser for Ottawa & GTA high technology clients. ACHIEVEMENTS  Designed & Assembled (4) Master Control Units (MCUs) and (7) Power Cabinets used for South Korea’s Segmented Wave Generator (SWG) – W.R. Davis Engineering  Revised dozens of layouts & schematic designs for Ottawa high technology clients – Vision Circuits  Manual Placement & Soldering of Power Supply and Power & Light Converter circuits -Absopulse  Designed PCB revisions for the UAV Aircraft Control & Failsafe Management System – L.I.N.  Arranged old schematics into logical hierarchy blocks for troubleshooting & analytical purposes – L.I.N.  Reduced PCB board size by 40% to fit into a smaller case enclosure – L.I.N.  Increased layout from 4-layer to 6-layer routing to improve board power convention – L.I.N. AREAS OF SPECIALIZATION  PCB Design Software – Altium Designer; Cadence Allegro; Mentor PADS & Expedition; EAGLE; Pulsonix; DesignSpark PCB; IPC Library Expert  3D Mechanical Software – DesignSpark Mechanical; CADopia InteleCAD  Engineering Software – Maple; Matlab; Turbo C++; Basic, C, and Pascal Programing; FPGAs >> SoC Embedded Development, SDK for OpenCL, ModelSim, DSP, C++ HLS  Operating Systems – Windows 7 & 10; Linux; Android, iOS; MacOS AWARDS  Millennium Scholarship – Parliament of Canada  Academic Awards – St. Lawrence College  Most Improved Player Award – St. Lawrence College Men’s Basketball Team  Athletic Scholarship – H.B. Beal High School Senior Boys Basketball Team

A young artist from Bangladesh providing highly professional work experience with suitable time. I do graphic design, 3d animation, presentation and so on visual effects. A design is not only a des... Read more

A young artist from Bangladesh providing highly professional work experience with suitable time. I do graphic design, 3d animation, presentation and so on visual effects. A design is not only a design but also a strong substance to the environment and total system.When one can get what to do, no one can stop as I believe. Interior-exterior designing, logo designing, illustration and and animation I do and I am a junior scholar of Fine Arts at University of Chittagong. Painting. sculpting and visual language is my basic courses in academy. I love colors and forms, space all around the world is waiting to be designed I think.

Hello my name is Mojtaba Shahbazi.I am 29 I have 9 over years of experience in about plastic injection mold. I can do product and plastic mold design also I can work with catia soft wares and rhino.I... Read more

Hello my name is Mojtaba Shahbazi.I am 29 I have 9 over years of experience in about plastic injection mold. I can do product and plastic mold design also I can work with catia soft wares and rhino.I also have experience in the fields of producing toys and Home appliances, automotive, electrical, etc....

I have experience as a mechanical engineer. I am a mechanical designer for industrial projects such as automation, jig and fixture, machine design, machining parts, and so on. I am able to produce 2D... Read more

I have experience as a mechanical engineer. I am a mechanical designer for industrial projects such as automation, jig and fixture, machine design, machining parts, and so on. I am able to produce 2D and 3D designs, as well as animation.

Ounce Design & Solution provide Mechanical Engineering development services. We firmly believe in maintaining the highest level of quality and integrity in work. Basically, this business is founded to... Read more

Ounce Design & Solution provide Mechanical Engineering development services. We firmly believe in maintaining the highest level of quality and integrity in work. Basically, this business is founded to help Small-scale Industries and Entrepreneur to overcome Mechanical Design problems and provides end to end solution.

I am an Architecture profession with six year experience in Design and Construction. I'm Skilled in space, Product, and custom interior Decoration Designs and 3D visualization. i also estimate project... Read more

I am an Architecture profession with six year experience in Design and Construction. I'm Skilled in space, Product, and custom interior Decoration Designs and 3D visualization. i also estimate project cost from a construction drawing to give a client a budget overview. clients satisfaction is my priority.

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in... Read more

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in love to design the concept base models and is always ready to bring creativity in the design out of the way. A guy who is ready to work with company to solve not only to solve the design problems but will bring the creativity in the design through economically as well as the safety point of view. I'll provide you the complete assistance in the FEA analysis in ANSYS workbench under static structural and transient modules of the ANSYS Workbench. I have done FEA analysis on the Cantilever beam under 6 DOF and also on springs for there responses as well as the fundamental frequencies associated with them and also available to do FEA analysis anytime you need me. I have done the FEA of the Spar Design of the Airplane with the beam, jigs and ribs i have lot of work and i can share it as well with the right person.

I am a Professional Structural Engineer (P.Eng – Ontario, Canada) with over 9 years of hands-on experience delivering practical, code-compliant structural solutions for industrial, commercial, and bui... Read more

I am a Professional Structural Engineer (P.Eng – Ontario, Canada) with over 9 years of hands-on experience delivering practical, code-compliant structural solutions for industrial, commercial, and building projects. I specialize in structural design and drafting for: • Steel, reinforced concrete, and wood structures (NBCC, CSA S16, CSA A23.3, CSA O86) • Industrial foundations, equipment supports, pipe racks, and tanks • Structural analysis and modeling using ETABS, SAFE, and SAP2000 • Construction-ready CAD packages, shop drawings, and coordination drawings • 3D modeling using AutoCAD, SolidWorks, and Inventor I focus on practical, buildable solutions — not theoretical designs. My experience includes close coordination with fabrication and construction teams, ensuring drawings are clear, accurate, and executable. Clients work with me to reduce rework, avoid constructability issues, and receive clear, execution-ready drawings. Typical deliverables include: • DWG and PDF construction / shop drawings • ETABS, SAFE, or SAP2000 analysis models • Summary calculation and design reports Professional sealing and responsibility for Canadian projects can be discussed separately, in accordance with provincial regulations and insurance requirements.

Hi i am fresher. i know pretty well autocad mechanical and solidworks

Hi i am fresher. i know pretty well autocad mechanical and solidworks

Nevil 23 Years old Student Civil Engineer

Nevil 23 Years old Student Civil Engineer

I am the mechanical Design engineer, successfully completed various design engineer projects like the design of two-stage reduction gearbox for automatic transmission of ATV (All Terrain Vehicle), Cam... Read more

I am the mechanical Design engineer, successfully completed various design engineer projects like the design of two-stage reduction gearbox for automatic transmission of ATV (All Terrain Vehicle), Camshaft design with the help of Creo parametric 3.0. I make various automobile parts like hubs, knuckles, transmission assembly. I was graduated from DBATU (first class) and also completed Post Graduation Diploma in Certified Design Engineer from Cadcamguru Solutions Pvt. Ltd. I studied various software like CATIA V5R20, CREO Parametric 3.0, Solidworks 16, UGNX 11 and Ansys Workbench 16.

I am a Certified SolidWorks Professional that would love to tackle your project. I guarantee prompt, accurate results without breaking the bank. I currently design fixtures/stands for products and equ... Read more

I am a Certified SolidWorks Professional that would love to tackle your project. I guarantee prompt, accurate results without breaking the bank. I currently design fixtures/stands for products and equipment daily. I can work from anything as simple as a ‘napkin sketch’ up to professional drawings and even written descriptions. Send your ideas/needs my way and you will have your finished product in no time. I am very familiar with the techniques for 3D printing using minimal material while keeping a very strong structure. By applying this acquired skill, I could design your product within your parameters to not only stand out by having flair and complimenting your idea, but also saving you money during the 3D printing phase as I will use less material than other designs might. I work for a consumer electronics company. I was a member of the product design team so much of my work involved the portion of the item that consumers handle and see. Now I work on the manufacturing side of the same company so I am able to have the experience of both product design and product manufacturing.

Hi, I am a designer with over 7 years of experience + master’s degree in landscape architecture. If you are not sure about your choice, we can make a test milestone. I can draw a set of 2D drawings a... Read more

Hi, I am a designer with over 7 years of experience + master’s degree in landscape architecture. If you are not sure about your choice, we can make a test milestone. I can draw a set of 2D drawings and make a 3D render and video presentation. Here is an example: render and exterior: https://youtu.be/4JpB8RXY5Lg https://youtu.be/1VVZm0fQJQI landscape design: https://youtu.be/XUHh3SMhiqY https://youtu.be/zzRSKvsK-dE https://youtu.be/XLrlV8nSJ7o For my work I use: - AutoCAD - Google SketchUp Pro - Lumion 10.0 Pro - Photoshop and Adobe Suite - RealTime Landscape Pro (if needed) Feel free to write to me, I will answer all questions :) - Pavlo