Hire the best freelance Duct Design Drawings expert designers for your company

I hold a degree in Architectural Engineering with a focus on Mechanical design and have been pursuing a career as a Professional Mechanical Engineer for the last 10 years. My professional experience... Read more

I hold a degree in Architectural Engineering with a focus on Mechanical design and have been pursuing a career as a Professional Mechanical Engineer for the last 10 years. My professional experience has given me the skill set to provide services such as developing construction documents, 3D modelling and construction coordination, as well as Revit content creation and management. Majority of my experience is with large industrial projects, that requires complex coordination between many mechanical systems. Expertise in Revit modeling and AutoCAD drafting for Mechanical systems, including HVAC, Plumbing and Utility Piping. Skill set includes MEP 3D modeling, detailing, construction document creation (for all design phases), Revit management (families, parameters, etc.), and BIM 360 project management.

Hello . I would like to help you with your drawings in Revit and Autocad in your Mechanical Installation Project works. If you have new projects to start, I would like to give a price. Have a good d... Read more

Hello . I would like to help you with your drawings in Revit and Autocad in your Mechanical Installation Project works. If you have new projects to start, I would like to give a price. Have a good day

Hi, I'm Anees, a Mechanical Engineer with 11 years of MEP design and drafting experience on commercial and residential buildings, including high-rise, hospital, office and residential projects. I hel... Read more

Hi, I'm Anees, a Mechanical Engineer with 11 years of MEP design and drafting experience on commercial and residential buildings, including high-rise, hospital, office and residential projects. I help architects, MEP contractors, consulting engineers and developers turn design intent into clear, buildable drawings, and I back those drawings with the calculations that support them. HVAC & MECHANICAL • Heating and cooling load calculations (Carrier HAP) and equipment selection support • Supply and return ductwork layouts, duct sizing and pressure-drop calculations • Fresh-air ventilation, exhaust and ERV design • VRF/VRV, split, AHU and FCU system layouts; diffuser and grille placement ELECTRICAL • Power, lighting, switching and circuiting layouts • Electrical load calculations, panel schedules, risers and single-line diagrams FIRE ALARM & ELV • Conventional and addressable fire alarm device layouts, risers and schematics, coordinated to NFPA 72 • CCTV, access control, structured cabling and PA layouts and risers PLUMBING • Water supply, drainage and plumbing layouts and risers, coordinated with the rest of the MEP services CAD / BIM DOCUMENTATION • AutoCAD drafting and Revit MEP modeling • PDF, scan and hand-sketch conversion to DWG • Redline incorporation, DWG cleanup, shop drawings, coordination and as-built drawings WHAT YOU RECEIVE Native DWG or RVT files plus a PDF set, organized to your CAD standard or template, with supporting calculation sheets (Excel or HAP reports) and a short revision log with each submission. HOW I USE AI I use AI and scripting for the repetitive parts of the work: checking drawings against a QA/QC checklist, comparing revisions, extracting equipment data into schedules and organizing redline comments. I review every drawing and calculation myself before delivery. AI speeds up the workflow; it doesn't replace engineering judgment. I don't upload client files to third-party AI tools without your permission. Standards I work with include NEC, NFPA 72, IEC, BS 7671 and your project specifications. TO START Send your drawings (PDF, DWG or RVT), the scope and your deadline. I'll review them and reply with any questions, a fixed price or hourly estimate, and a delivery schedule before any work begins.

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and... Read more

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and heat transfer analysis.

My name is Allabaksh Bagali, I am a Mechanical Design Engineer, Having 3 years of experience in Design field. I define myself as a confident, creative person who constantly looks forward for improvisa... Read more

My name is Allabaksh Bagali, I am a Mechanical Design Engineer, Having 3 years of experience in Design field. I define myself as a confident, creative person who constantly looks forward for improvisation. Familiar with softwares like, Autocad 2D and 3D, Solid Works, Catia V-5, Solid Edge., and many more. I'm having an Experience in 2D drawing, 3D modeling, and visualization. First, you can send me your design requirements in terms of: Picture freehand sketch 2d file Second, you can get according to your request: 3d model for your design. 2d Manufacturing Drawing for each part. Assembly of multiple parts. 2d Assembly Drawing. 3D rendering parts Exploded & Collapsed view for your design. Animation video for your design. photorealistic view (Video & photo). Rendering. stl file -- (For 3d Printing). dxf file -- (For Laser or CNC Cutting). Demonstrated advanced CAD skills in creating new components/ assemblies and analyzing existing designs to implement mechanical improvements while reducing costs. Designed and implemented numerous engineering changes to increase trailer quality as well as efficiency using Solid Works CAD software. Produced detailed manufacturing drawings of heavy recycling equipment from specifications and parametric models using 3D CAD software. Analyzed and recommended CAD system resulting in greater flexibility, efficiency, and ability to outsource components. Provided Design and Documentation per ANSY Y14.5 and GD & T Added geometric dimensioning and tolerance (GD & T) to blueprints. As a HVAC Design Engineer Some of my Skills are: • Heat Load Calculation by manually and using HAP software following ASHRAE Standards. • Duct design by manually and using duct design software. • Air Distribution System by Velocity Reduction Method, Equal Friction Method and Static Regain Method following SMACNA Standards. • Chilled water piping design as per ASHRAE standard. • ESP Calculations for Fans & Blowers. • Evaporator cooling coil selection. • Ventilation design as per ASHRAE 62.1, 62.2 standards. • Stairwell pressurization system Designing. • Car Parking ventilation and fresh air system Designing. • Kitchen ventilation and fresh air system Designing. • Head Loss calculation for Primary & Secondary Pump system. • Chilled water pumps, condenser water Pumps Selection and power calculation. • Selection of Chillers, AHU’S, FCU’S, Exhaust Fan, Blower, Window AC, Cooling Tower, Desert Cooler and other Equipment’s. • VRV Machine placement, duct sizing, pipe design and routing. • Selection of VRV Indoor and Outdoor units with respect to diversity factor 120%. • Project Planning of various Hotels, Shopping Malls and Hospitals by using VRV system. • Tender drawing Preparation. • Mechanical Quantity Survey and Bill of Quantity (BOQ) preparation. As a HVAC Draughtman Some of my Skills are: • Preparation of Design & Shop Drawings. • Drafting of Duct Layouts for AHU, FCU, and Package Units. • Drafting of Roof Plan for HVAC Equipment. • Drafting of chilled water Piping Riser Diagram. • Detailed drafting of all HVAC details. • Drafting of HVAC Schematics for central air systems and chilled water systems. • Drafting of Refrigerant Piping, chilled water piping design. • Drafting of VRV & VRF systems. • Drafting of Pipe sizing and Riser diagram of VRV and VRF System.

My Self Suman Pramanik. I am from India. I am a Professional Machine Design Engineer with MSME Certified.

My Self Suman Pramanik. I am from India. I am a Professional Machine Design Engineer with MSME Certified.

We provide following design & development services :- · 2D Manufacturing Drawing & 3D Modelling of single part & assembly. · Prepare 3D Model & 2D Drawing by Measuring a parts. · Crea... Read more

We provide following design & development services :- · 2D Manufacturing Drawing & 3D Modelling of single part & assembly. · Prepare 3D Model & 2D Drawing by Measuring a parts. · Creating Exploded Isometric Drawing of Assembly with Bill Of Material. · Structure Design, Analysis & Fabrication Drawing. · Design & Development of Machine. · Fixture Design for Robotic / Manual Welding, Machining Process & Assembly. · Sheet Metal Design, Modelling & Cutting Layout of Sheet for Laser & Water Jet. · Pressure Equipment Design (As per Design Code) & Fabrication Drawing. · Piping & Routing Design, Modelling & Isometric Drawing. · Design New Machine from Old Design / Machine by Reverse Engineering. · Develop Conceptual Design from Client Requirement / Instruction. · Working Animation of Machine & Motion Analysis. · Prepare Presentation of Machine. · Create Realistic Photo Copy of Machine (Render Image) by using Virtual Model. · Develop Part Number, Assembly Number & Drawing Number Generating Chart which help in ERP systems. · Mould Design, Die Design (Casting, Punching & Roll Forming). · Injection Moulding Die Design. · Static, Dynamic & Thermal Analysis of Machine. · Vibration Analysis of Machine. · Motion & Flow Simulation. · Industrial Training of Various Design Software. Please follow below link to find our work portfolio : https://drive.google.com/open?id=1XX9XgKDlvsNwevm979S870HEmqLCPaTv E-mail us your design requirement or design problem. Visit Us on :- www.hexspurdesigns.com Authorized License User Of SolidWorks & G-Star CAD

Experienced Design Engineer with a demonstrated history of working in the MEP design industry. Skilled in AutoCAD, Revit and MS Office. Strong engineering professional with a Bachelor of Engineering... Read more

Experienced Design Engineer with a demonstrated history of working in the MEP design industry. Skilled in AutoCAD, Revit and MS Office. Strong engineering professional with a Bachelor of Engineering focused in Mechanical Engineering from Adhiparasakthi Engineering College.

Highlights (Technical strength & Skills) • Test reports preparing & reviewing for MEP Systems • HVAC Air balancing • Duct design & sizing • Thermal load calculations • HVAC System D... Read more

Highlights (Technical strength & Skills) • Test reports preparing & reviewing for MEP Systems • HVAC Air balancing • Duct design & sizing • Thermal load calculations • HVAC System Design & selection • Preventative maintenance • MEP Testing & Commissioning • System diagnostics • Primavera P6 & MS project • Carrier HAP 4.51 • MS Word, Excel & power point • Auto CAD • International standards ( ASHRAE, CIBSE, NEEB, NFPA,) • Technical writing Academic(strength & skills) • Machine design problem solving • Heat transfer • Refrigeration & air conditioning • Thermodynamics • Fluid Mechanics • Mathematics General (Strength & skills) • MS office ( word & excel) • File exchange word to pdf & pdf to word • Primavera p6 • Data Entry • Report writing • Technical writing Skills & Experience: (International Experience: United Arab Emirates & Kingdom of Saudi Arabia) •Preparing & Reviewing Reports, Tender Documents, Engineering Calculations with the source of knowledge, specifications, budgeting and literature for HVAC Projects •Design & calculation of cooling/heating loads of commercial & residential buildings by the use of computer software’s like Carrier HAP (Hourly Analysis Program) • FAHU's, AHU's ,DX & Decorative units Selection. • ventilation & smoke control system design & calculation. • Design & Calculation & sizing of airflow ducts for commercial & residential projects. • HVAC System selection for commercial & residential projects. •Data fixation including HVAC design duty parameters. •Scrutiny and comparing of Shop Drawings with the design and Tender drawings •Checking of plans, drawings and quantities for accuracy of calculations. • preparing of ITPs, Technical submittals & Method of statement for Testing & commissioning & Air balancing. •Preparing & reviewing Testing & Commissioning method statement & O & M Manual for MEP works. •Evaluating designs of HVAC systems, plumbing & drainage, irrigation, swimming pool & fire safety and building automation systems. •Creating and carrying out test procedures for MEP system and ensuring their smooth functioning. •Sharing the T&C plan & the sequence of operation with project engineers. •Preparing/updating commissioning tacking program for monitoring status of commissioning works Witness and verifies site installation, pre & post commissioning of the system/equipment performance based on the approved commissioning procedures in accordance with the design, contracts, plans, specifications and standards of various systems and equipment such e.g., HVAC Systems(CHW pipes chemical treatment, Air & Water balancing, CHW Pumps, Chemical dosing & pressurization units DX & CHW FAHU's, AHU's, FCU's & heat pumps ), Plumbing & Irrigation system , Building Ventilation & Smoke Management System, Firefighting Systems(Fire pumps, Clean agent system , fire suppression system, FHC, ZCV & Cause & effect matrix), & specialized Systems( Swimming pool, SPA & sauna , Jacuzzi & heat pumps) etc. •Documenting reports of progress made in project Projects •DAMAC HILLS by DAMAC properties LLC Dubai United Arab Emirates (2500 Villas different Clusters models, Paramount villas, Nine G+7 Clusters, Service stations ) •DAMAC Towers by Paramount Hotel Riyadh Kingdom of Saudi Arabia ( Two High rise building G + 33 & G + 37) •Tower 108 by DAMAC property development Dubai United Arab Emirates ( G+4P +28) •Ghalia Tower by DAMAC property development LLC Dubai United Arab Emirates ( G+4p +38) Education: •Bachelor of Technology Mechanical Engineering •Marks : 76.56% •Achievements& Rewards: Got a distinction certificate on four consecutive positions at university of engineering & technology Peshawar Got a laptop on a good performance from Higher Education Commission Pakistan •Modules Studied: Refrigeration & Air conditioning, Mechanical Engineering Design, Thermodynamics, Heat & mass transfer, Power plant, Mechanical vibration, Engineering Economics, Installation testing & maintenance of Machines, Fluid Mechanics & Hydraulics Machinery, Theory of Machines, Applied Mechanics, Strength of Materials, Basics Electronics, Mechatronics.

I am a Mechanical Engineer, with +8 years of experience in designing and installation, specialized in HVAC system design for residential and commercial buildings. I have experience in load calculation... Read more

I am a Mechanical Engineer, with +8 years of experience in designing and installation, specialized in HVAC system design for residential and commercial buildings. I have experience in load calculations, duct sizing, equipment selection, and complete HVAC drawings using AutoCAD and Revit MEP. I can help you with: ✔ HVAC load calculations (cooling/heating) ✔ Ductwork & piping layout design ✔ MEP coordination drawings ✔ Equipment selection and BOQ ✔ VRF Software calculations ✔ Mechanical Engineering solutions ✔ 2D & 3D modeling I focus on accuracy, fast delivery, and clear communication.

I am a mechanical engineer having seven years of experience in MEP field in Nepal and middle east. I have worked on HVAC design and installation in various commercial, residential and industrial proje... Read more

I am a mechanical engineer having seven years of experience in MEP field in Nepal and middle east. I have worked on HVAC design and installation in various commercial, residential and industrial projects. I have experience in high rise buildings also. I have good knowledge of AutoCAD MEP, Autodesk Revit MEP, Carrier HAP.

been in industry since 1987 shop and field experience 1987-1994 hand drafting 1995-2000 AutoCad since 2001 Cadpipe East Coast Cad CadDuct PractiCad Navisworks

been in industry since 1987 shop and field experience 1987-1994 hand drafting 1995-2000 AutoCad since 2001 Cadpipe East Coast Cad CadDuct PractiCad Navisworks

I have been in industry since 1987 Field and shop experience until 1995 hand drafting 1996-2000 CAD drafting since then.

I have been in industry since 1987 Field and shop experience until 1995 hand drafting 1996-2000 CAD drafting since then.

I am a Technical Office Engineer specializing in HVAC ductwork design, shop drawings, and technical solutions. I have experience in designing and preparing air duct systems, air outlets, ventilation s... Read more

I am a Technical Office Engineer specializing in HVAC ductwork design, shop drawings, and technical solutions. I have experience in designing and preparing air duct systems, air outlets, ventilation systems, exhaust and fresh air systems. I work with AutoCAD and can prepare accurate drawings suitable for fabrication and installation. I also have experience with duct sizing, material specifications, sheet metal thicknesses, TDF flanges, and coordination with site requirements. I focus on accuracy, practical solutions, and delivering professional work on time. I am interested in working with HVAC contractors, duct manufacturing companies, and engineering teams remotely, providing reliable technical support and high-quality drawings.

Hi, I’m Satish Pal, an HVAC Design and Drafting professional with 8+ years of experience delivering accurate, efficient, and code-compliant HVAC solutions for residential, commercial, and industrial p... Read more

Hi, I’m Satish Pal, an HVAC Design and Drafting professional with 8+ years of experience delivering accurate, efficient, and code-compliant HVAC solutions for residential, commercial, and industrial projects. My services include: HVAC Design & Drafting Duct Layout and Shop Drawings HVAC Piping Layouts Ventilation & Exhaust System Drawings Equipment Layout and Coordination Drawings As-built Drawings and Drawing Revisions AutoCAD-based HVAC Documentation

Mechanical design engineer with extensive experience in 3D mechanical modeling, industrial duct systems, and steel structure design. I specialize in developing complete 3D assemblies, structural supp... Read more

Mechanical design engineer with extensive experience in 3D mechanical modeling, industrial duct systems, and steel structure design. I specialize in developing complete 3D assemblies, structural supports, suspension systems, and detailed fabrication drawings for industrial equipment. Software: • Autodesk Inventor • AutoCAD • SolidWorks My work focuses on practical engineering solutions that can be directly used for manufacturing and installation in industrial environments. I am available for mechanical design, CAD modeling, and technical documentation projects.

Iam an HVAC Design Engineer with experience in designing air conditioning and ventilation systems for residential, commercial, and administrative buildings. Skilled in cooling load calculations, duct... Read more

Iam an HVAC Design Engineer with experience in designing air conditioning and ventilation systems for residential, commercial, and administrative buildings. Skilled in cooling load calculations, duct sizing, equipment selection, shop drawings, and HVAC system design using AutoCAD, Revit MEP, and HAP. Committed to delivering accurate, efficient, and code-compliant designs on time

I'm a skilled hard worker Mechanical Design Engineer having 5+ years experience in the study and design of Mechanical system for residential,commercial,high rise building (HVAC,Plumbing). I use Autoca... Read more

I'm a skilled hard worker Mechanical Design Engineer having 5+ years experience in the study and design of Mechanical system for residential,commercial,high rise building (HVAC,Plumbing). I use Autocad for drawings and HAP software for load calculations.

I am Mechanical Design Engineer. I have work experience of 5 years as designer. I am good in mechanical design, Product design, HVAC Systems design & Duct design various types of company like Pharmace... Read more

I am Mechanical Design Engineer. I have work experience of 5 years as designer. I am good in mechanical design, Product design, HVAC Systems design & Duct design various types of company like Pharmaceutical, Textile, Foods, Power plant, Foils Factory etc. I have good knowledge in AutoCAD, Solidworks, Microsoft Advance Excel, Microsoft Power point & Microsoft Word. Best Quality Works With Lowest Price guaranteed. No any rework charges. 100% Work satisfaction Thanks you...

Senior Design Engineer skilled in AutoCAD and SolidWorks, with experience in mechanical design, 3D modeling, drafting, and engineering drawings. I focus on creating accurate, practical, and cost-effec... Read more

Senior Design Engineer skilled in AutoCAD and SolidWorks, with experience in mechanical design, 3D modeling, drafting, and engineering drawings. I focus on creating accurate, practical, and cost-effective designs while meeting project requirements and deadlines.

1. I do Heat Load calculation in an excel sheet and derive the tonnage for the area to be airconditioned. 2. Do Duct design and Chilled water pipe design with Mcquay sizer software. 3. And do VRV/VRF... Read more

1. I do Heat Load calculation in an excel sheet and derive the tonnage for the area to be airconditioned. 2. Do Duct design and Chilled water pipe design with Mcquay sizer software. 3. And do VRV/VRF design with pipe routings. 4. Convert the design into Autocad 2D drawings as per the requirements. 5. Additionally I do Data Entry work in which I can convert any file format to MS word with reasonable speed and accuracy.

I’m a CAD Design Engineer specializing in AutoCAD, ZWCAD, AV layouts, 2D technical drawings, and engineering documentation, with professional experience in AV system design and telecom/fiber engineeri... Read more

I’m a CAD Design Engineer specializing in AutoCAD, ZWCAD, AV layouts, 2D technical drawings, and engineering documentation, with professional experience in AV system design and telecom/fiber engineering. I help clients convert concepts, site measurements, sketches, and requirements into accurate, clear, and implementation-ready CAD drawings. What I can help with: 2D AutoCAD & ZWCAD drawings AV layout drawings Speaker and display layouts LED video wall layouts Projector and projection layouts Rack layouts and equipment placement Cable, wiring and conduit layouts AV elevations and mounting details Custom bracket and support drawings Site measurement-based drawings As-built drawings BOQ and technical documentation Drawing revisions and updates PDF/sketch/image to CAD conversion CAD drawing cleanup and standardization I also have experience in FTTH, fiber network and telecom design, including OSP layouts, cabinet/duct planning, fiber routes, site surveys, and as-built documentation. My approach is focused on accuracy, practical installation requirements, clean drawing standards, and clear communication. I can work from existing drawings, PDFs, sketches, marked-up drawings, photographs, or site measurements. If you need a reliable CAD professional to turn your requirements into clean, accurate, and practical technical drawings, feel free to reach out with your project details.

Graduate in Mechanical Engineering with 6 years’ experience in MEP Design & Drafting. I can produce Mechanical Builders work drawing (Wall, Slab & Beam) for the construction, HVAC & Plumbing drawings... Read more

Graduate in Mechanical Engineering with 6 years’ experience in MEP Design & Drafting. I can produce Mechanical Builders work drawing (Wall, Slab & Beam) for the construction, HVAC & Plumbing drawings for the Site Service Installation, Equipment Room coordination drawings for the better installation. I am capable to make Duct sizing, Duct Layout and Air Distribution, Equipment selection and Plumbing and Drainage system for small to high rise buildings. I am Proficient in AutoCAD 2D & Solidworks 3D. My Project experience range from medium level residential building to High rise residential cum commercial buildings and everything in between.

MEP Engineer | Skilled in HVAC, Electrical & Plumbing Systems|Skilled MEP Engineer with hands-on understanding of HVAC, electrical distribution, plumbing layouts, and fire-fighting systems, focused on... Read more

MEP Engineer | Skilled in HVAC, Electrical & Plumbing Systems|Skilled MEP Engineer with hands-on understanding of HVAC, electrical distribution, plumbing layouts, and fire-fighting systems, focused on ensuring quality, safety, and smooth project exec

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventu... Read more

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventually becoming a Senior Contracts Manager taking charge of large HVAC installations. My Job description: • Duct design and workshop drawing plantroom layout. • Liase with client / consultants and architect on mechanical building services co-ordination and planning. • Workshop, site co-ordination and supervision. • Air-conditioning chilled, hot water piping schematics and layout details. • Tendering and estimating of jobs • Attend site and co-ordination meeting • Procurement of equipment • Monthly invoicing of contracts • Chilled water pipe calculations using the carrier design program. • Writing and compiling air conditioning maintanace manuals. • Design and manufacture of custom built chilled water air handling units for southern air conditioning contracts After 25 years I moved to a HVAC Design Consultancy Company as a Senior Design Engineer. My Job description • Budget proposal reports • Preliminary design reports • Hvac design. • Liase and architect on mechanical building services coordination and planning. • Attend plannining, site and co-ordination meetings. • Financial control up to final account. • Supervision of contract construction to final completion. • Suppervision of the hvac commissioning