Description:Use 3DS Max or similar to model a Modern yet comfortable Media Room. See example pics.
Lighting is the key as our client is a lighting firm. First stage of the project is producing the model and supplying it along with just 1 render.
The model is to showcase mood lighting in the room. The next phase of the project will be the same shot, from exactly the same place, just rendered with different lighting / moods as instructed by client. Ongoing work for successful applicant.
Wants:Photo Realistic renders required.
- 3ds Max
Additional InformationMood lighting example of previous project - https://www.dropbox.com/sh/fj9pt8dbwluxmtr/AAD9WfQ-00z7w-5_gvfV2CcNa
Similar Contests on Cad Crowd
360 Panorama Rendering
I need a model of an Office Space area created based on dwg file I have attached and then a single camera point 360 Panoramic Render. I need to be able to visualize desks chairs, tables etc. I need a test Render to be started and have the number of frames, the CPU make and model on your computer and the average time it takes a frame to render. I will be sending these off to a render farm so please deliver the specs for the highest render quality. The delivery will include: 1. CAD Model of an Office Space 2. The prepped and set up Camera Position for the 360 Panoramic render. 3. CPU Make and Model on you system 4. Test Render Specs: 1. Number of Frames 2. Average time per frame 5. Low Res Render or screen shot to show what office model looks like. 6. Quote of what this would cost regularly.
I want a design for a device that will rotate a wheel about 10 inches in outer diameter about 1 complete rotation back and forth. I prefer for the device to sit on the floor and rotate the wheel back and forth instead of attaching to the carriage frame since I don’t have any carriage specs and they may vary depending on which model is being used The device could attach to the wheel itself, rim or tire. It should be adjustable though to fit on a few different size wheels. It should be designed to be able to adjust to a wheel from 7 - 10 inches.
17 foot Wood Drift Boat
This contest will be for the most accurate CONSTRUCTION PLANS for a WOODEN DRIFT BOAT HULL. Key features include: 5 piece hull. 5 pieces will be created separately on a table, covered in fiberglass and Kevlar, then stitched and glued together to create the shape of the hull. 1. The Bottom. (1) 3/4" Plascore (honeycomb poly material) measuring approximately 14'6" long X 60" wide. The basic shape of the bottom of this hull will be similar to a "football". However, I would like at least 4 foot STRAIGHT sections running down both sides of the hull (4 foot straight chines). This will aid in the handling of the drift boat. The 14'6" length will be lifted at both the bow and stern ends approximately 5" (rocker). Both the bow and the stern will be identical from one another, so you will only need to draw half of the boat, copy, rotate and attach to finish the plans. 2. The sides. (2) 9mm Okume plywood sides that will measure approximately 18-19 feet long and will range in height from +/-16" to 22" tall. The goal will be to create curved side panels 22" tall in the center of the boat where the oar locks will be attached for a section of at least 1 foot on either side of center. 16-18 inch middle sections for ease of entry into the boat that will gradually slope to meet, and 16" sections at the bow and stern. This should include the end angles where the sides will meet the bottom of the hull, and the bow and stern sections. Obviously all up for adjustment to get the overall shape of the hull to look correct anf for ease of construction. 3. The Bow and stern. This is the difficult part of the boat and the real reason for my contest. To create (2) conical or half-cylinder shapes from 3mm pieces of Okume Plywood that will be bent and laminated 3 times to match the side thickness. This will include the dimensions and angles for attaching that curved transom to the sides and the bottom of the Plascore panels to create an appropriate fit. 3mm Okume can be bent into about an 18" circle, so curves with a radius down to about 8" are possible depending on the grain. I have included a photo of a similar boat hull that has already been built per my design. However, this was done entirely by trial and error and cannot be duplicated. It is also smaller than the specifications in these plans. My goal is to end up with a set of plans that would allow this hull shape to be recreated. NOTE: The interior layout of the boat will be modeled in the future. Additional design work may be possible for the winner of this contest. For that reason, please include a centerline on both axis to use a measuring point for interior layout.
Jewlery Designer for Wedding Ring Design
I am looking for a solid model of an engagement ring. I know what I want, but I need someone to model it for me so it can be cast
cordage cam and hook
This is to be a prototype device so it may have a few iterations. There will be additional funds for a planned phase II of this prototype. The idea is a way to secure cordage or twine. The rough specs are 40mm long, 20mm wide and 5mm thick at the base. The cam should be modeled similarly to the look of something you would see on a sailboat. The arch must be just slightly lower than the top of the cam. The cam should be usable for 2mm-6mm cordage.