Description:I need a quick/simple cad drawing for a staircase in an apartment. We are replacing the staircase and frame and we wanted to put the drawing into cad with the dimensions.
Wants:I don't have this information yet. I am meeting with my dad tomorrow to get more of the dimensions etc.
- AutoCAD (open)
Additional InformationAttached is a sketch and some of the dimensions. These are the photos of the staircase. My dad and I are going to replace it but we just need a drawing to show and the wood panel in the back if you can add that on the drawing as well.
Similar Contests on Cad Crowd
cordage cam and hook
This is to be a prototype device so it may have a few iterations. There will be additional funds for a planned phase II of this prototype. The idea is a way to secure cordage or twine. The rough specs are 40mm long, 20mm wide and 5mm thick at the base. The cam should be modeled similarly to the look of something you would see on a sailboat. The arch must be just slightly lower than the top of the cam. The cam should be usable for 2mm-6mm cordage.
360 Panorama Rendering
I need a model of an Office Space area created based on dwg file I have attached and then a single camera point 360 Panoramic Render. I need to be able to visualize desks chairs, tables etc. I need a test Render to be started and have the number of frames, the CPU make and model on your computer and the average time it takes a frame to render. I will be sending these off to a render farm so please deliver the specs for the highest render quality. The delivery will include: 1. CAD Model of an Office Space 2. The prepped and set up Camera Position for the 360 Panoramic render. 3. CPU Make and Model on you system 4. Test Render Specs: 1. Number of Frames 2. Average time per frame 5. Low Res Render or screen shot to show what office model looks like. 6. Quote of what this would cost regularly.
Designer high product
Designing a custom smoke tray with removable parts length 13.0"width 11.0" Depth 1.25" rounded corners I'm making a medium size tray and large one I also need unlimited corrections
The Water Wheel Kayak
We are looking to blend the kayak with the pedal boat. What we want is to recreate the design thought up by Hobie Cat in which they incorporate a pedal design within the kayak. However, we want the pedals to be linked to two water wheels on the side rather than the "fin" system that Hobie Cat uses. (see photo for details) This kayak needs to incorporate a pedal system where people would normally just rest their feet. It would also have to showcase two water wheels on the side. We want the water wheels to be linked by an axe so that they may be easily removed from the kayak if the user chooses to do so. For kayak base use Prower 13 by Ocean Kayak (picture attached). The new design would have A) two pedals where one would normally rest their feet. (see Slayer 13 picture for pedal design inspiration) B) An axe with two water wheels that would be placed at the front the of kayak above the pedals but below the hatch. (See the water wheel picture for inspiration) We'd like the water wheels to be removable and not as bulky as the one in the "Water Wheel picture" What we need- 2 drawings, one from the top, one from the side (just like the slayer 13 picture)
17 foot Wood Drift Boat
This contest will be for the most accurate CONSTRUCTION PLANS for a WOODEN DRIFT BOAT HULL. Key features include: 5 piece hull. 5 pieces will be created separately on a table, covered in fiberglass and Kevlar, then stitched and glued together to create the shape of the hull. 1. The Bottom. (1) 3/4" Plascore (honeycomb poly material) measuring approximately 14'6" long X 60" wide. The basic shape of the bottom of this hull will be similar to a "football". However, I would like at least 4 foot STRAIGHT sections running down both sides of the hull (4 foot straight chines). This will aid in the handling of the drift boat. The 14'6" length will be lifted at both the bow and stern ends approximately 5" (rocker). Both the bow and the stern will be identical from one another, so you will only need to draw half of the boat, copy, rotate and attach to finish the plans. 2. The sides. (2) 9mm Okume plywood sides that will measure approximately 18-19 feet long and will range in height from +/-16" to 22" tall. The goal will be to create curved side panels 22" tall in the center of the boat where the oar locks will be attached for a section of at least 1 foot on either side of center. 16-18 inch middle sections for ease of entry into the boat that will gradually slope to meet, and 16" sections at the bow and stern. This should include the end angles where the sides will meet the bottom of the hull, and the bow and stern sections. Obviously all up for adjustment to get the overall shape of the hull to look correct anf for ease of construction. 3. The Bow and stern. This is the difficult part of the boat and the real reason for my contest. To create (2) conical or half-cylinder shapes from 3mm pieces of Okume Plywood that will be bent and laminated 3 times to match the side thickness. This will include the dimensions and angles for attaching that curved transom to the sides and the bottom of the Plascore panels to create an appropriate fit. 3mm Okume can be bent into about an 18" circle, so curves with a radius down to about 8" are possible depending on the grain. I have included a photo of a similar boat hull that has already been built per my design. However, this was done entirely by trial and error and cannot be duplicated. It is also smaller than the specifications in these plans. My goal is to end up with a set of plans that would allow this hull shape to be recreated. NOTE: The interior layout of the boat will be modeled in the future. Additional design work may be possible for the winner of this contest. For that reason, please include a centerline on both axis to use a measuring point for interior layout.