Description:We are looking to blend the kayak with the pedal boat.
What we want is to recreate the design thought up by Hobie Cat in which they incorporate a pedal design within the kayak. However, we want the pedals to be linked to two water wheels on the side rather than the "fin" system that Hobie Cat uses. (see photo for details)
This kayak needs to incorporate a pedal system where people would normally just rest their feet. It would also have to showcase two water wheels on the side. We want the water wheels to be linked by an axe so that they may be easily removed from the kayak if the user chooses to do so.
For kayak base use Prower 13 by Ocean Kayak (picture attached).
The new design would have
A) two pedals where one would normally rest their feet. (see Slayer 13 picture for pedal design inspiration)
B) An axe with two water wheels that would be placed at the front the of kayak above the pedals but below the hatch. (See the water wheel picture for inspiration)
We'd like the water wheels to be removable and not as bulky as the one in the "Water Wheel picture"
What we need- 2 drawings, one from the top, one from the side (just like the slayer 13 picture)
Wants:Wheels- we want a sleek, innovative wheel system designed for the 21st century.
Integration- We want the system to be easily integrated into the kayak and for the wheels to be able to be removed.
Don't Wants:We do not want an old, bulky wheel system such as the one showcased in the "water wheel" picture. This is just for inspiration and to show how the wheels would have to fit on the exterior of the kayak.
- Adobe Illustrator
Similar Contests on Cad Crowd
A simple cad drawing for a staircase/frame for an apartment
I need a quick/simple cad drawing for a staircase in an apartment. We are replacing the staircase and frame and we wanted to put the drawing into cad with the dimensions.
cordage cam and hook
This is to be a prototype device so it may have a few iterations. There will be additional funds for a planned phase II of this prototype. The idea is a way to secure cordage or twine. The rough specs are 40mm long, 20mm wide and 5mm thick at the base. The cam should be modeled similarly to the look of something you would see on a sailboat. The arch must be just slightly lower than the top of the cam. The cam should be usable for 2mm-6mm cordage.
Designer high product
Designing a custom smoke tray with removable parts length 13.0"width 11.0" Depth 1.25" rounded corners I'm making a medium size tray and large one I also need unlimited corrections
360 Panorama Rendering
I need a model of an Office Space area created based on dwg file I have attached and then a single camera point 360 Panoramic Render. I need to be able to visualize desks chairs, tables etc. I need a test Render to be started and have the number of frames, the CPU make and model on your computer and the average time it takes a frame to render. I will be sending these off to a render farm so please deliver the specs for the highest render quality. The delivery will include: 1. CAD Model of an Office Space 2. The prepped and set up Camera Position for the 360 Panoramic render. 3. CPU Make and Model on you system 4. Test Render Specs: 1. Number of Frames 2. Average time per frame 5. Low Res Render or screen shot to show what office model looks like. 6. Quote of what this would cost regularly.
Apple Watch 4 Stethoscope Mount
To design a mount for the Apple Watch 4 that attaches to the bell or tubing of any standard stethoscope. Within the mount there will be 2 ECG leads that will that are in contact with the ECG leads (electrodes) on the Apple Watch (1 on the bottom of the watch, 1 on the crown) and extend them to the right and left of the bell on the stethoscope. This could then be placed on a patient’s chest to measure ECG. Essentially, this would convert the personal single lead ECG on the Apple Watch into a single lead ECG on a stethoscope, making the stethoscope “smart”. This is similar to the project previously posted by me called Vitascope.