BarrierBlind
in
3D Modeling Design
held by
markh9
Last seen:
TIME REMAINING: 10 days, 10 hours
-
Open
-
Choosing Finalist
-
Ended
Prepaid PrizeEntries
Discussion
At least tell us how tall is the wall painted in yellow at the top of the stairs.
Don't come up with that solution yet. There are more ways it can be done. At least tell us your budget. 8f budget is not a constrain then we can come up with more practical and completely automated design.
Answer to my DM, please.
Thank you for your efforts so far - I think given the designs the best solution would be something g that could be anchored/fixed to the stair/stairs reasonably light weight but strong
What is a vertical distance between a ceiling and step at a depth of 100-150mm from a corner of the wall?
According to auxiliary drawing I have submitted.
According to auxiliary drawing I have submitted.
Hey Markh9
Could you tell me if there's a gap between the wooden railing and the wall tight beside it (in the middle of the stairs) in this picture? Could you tell me approximately how much gap there is? may seem arbitrary but I have a design in mind.
Could you tell me if there's a gap between the wooden railing and the wall tight beside it (in the middle of the stairs) in this picture? Could you tell me approximately how much gap there is? may seem arbitrary but I have a design in mind.
Hi Markh9
would you like the Barrier to be Powered or hand operated ?
would you like the Barrier to be Powered or hand operated ?
Good afternoon - thank you for all of your comments and designs so far.
I'd like to address some of the comments -
An intruder would be classed as someone who breaks into the house
The need is for it to be high enough to stop someone climbing over it
The material is open for discussion - as long as it can hold for 5 to 10 minutes whilst the police make there way
The environment can also be used, as long as it can fold away neatly discreetly or folded up and put away (but easy to do)
Yes I will update the dimensions once the design has been confirmed
The best place for the barrier to be will be roughly roughly the middle of the stairs, there's potentially a part of the drop down wall which could be utilised
You guys are the experts so I'm really excited to see your solutions.
Mark
I'd like to address some of the comments -
An intruder would be classed as someone who breaks into the house
The need is for it to be high enough to stop someone climbing over it
The material is open for discussion - as long as it can hold for 5 to 10 minutes whilst the police make there way
The environment can also be used, as long as it can fold away neatly discreetly or folded up and put away (but easy to do)
Yes I will update the dimensions once the design has been confirmed
The best place for the barrier to be will be roughly roughly the middle of the stairs, there's potentially a part of the drop down wall which could be utilised
You guys are the experts so I'm really excited to see your solutions.
Mark
Several questions:
1) define intruder? Its not meant for kids or something.
2) you need to cover the whole access area of the stairs + stairwell. corret?
3) If its an intruder barrier, than this should be a metalic one. Correct?
4) Any restrictions on using the surrounding envinroment? (holes in walls, floor, etc)
5) could you give some actual dimensions? or after you select a design you will update the dimensions according to the actual size?
1) define intruder? Its not meant for kids or something.
2) you need to cover the whole access area of the stairs + stairwell. corret?
3) If its an intruder barrier, than this should be a metalic one. Correct?
4) Any restrictions on using the surrounding envinroment? (holes in walls, floor, etc)
5) could you give some actual dimensions? or after you select a design you will update the dimensions according to the actual size?
do you want to barricade the stairs gap only or all the open area ( i mean its for children or for the adults) ?
can we get exact measurements and where u want to place, plz mark in the photo (rough sketch)
Barrier works automatically or manually required ? can you shear the dimensions of the barrier?
Collapsible gate will do the job...
There are surely fire safety requirements / constraints / regulations that apply to this. What are they?
Hello Mark, do you have any preference of material or process to manufacture the barrier? For example, wood, metal, structural tubes, bolts, welding, screws, etc.
Another question, the design should be stand-alone or could be fixed to the walls?
Could you provide some dimensions of the space from the reference?
Another question, the design should be stand-alone or could be fixed to the walls?
Could you provide some dimensions of the space from the reference?
Similar Contests on Cad Crowd
Handle / Grip design with gear & Latch
The design needed is for a handle / grip that when squeezed, it will make a 3/8" square bar, which is in a 1 1/2" high extruded piece, travel aprox 2 1/2" towards the grip. See short video. This also needs to be able to lock into multiple positions when squeezed and also have an easy release so that when released it springs back into its original open position.
This will be attached to the end of the 1 1/2" high extrusion. There are 2 openings in this extrusion. One along the top will be a square opening in which the 3/8" square bar will be encased and the other one will be a round hole which will encase a 3/8" round tube in which water will travel through. This round tube will need to extend out the back of the extrusion and through the handle and attach to a water hose. The handle / grip needs to extend up above the extrusion a minimal amount. The attached picture of my prototype extends way too high above the extrusion.
One thought is to incorporate a rack and pinion type gear to achieve this. Any type of gear or mechanism will need to be enclosed in the handle.
Biological Cell Cluster
I am looking to obtain a 3D CAD model of a biological cell cluster in order to transfer it to a multiphysics simulation software (COMSOL). The cluster will consist of 120 'cells' in the shape of a hyper-dodecahedron (https://theory.org/geotopo/120-cell/ ). Each side of each dodecahedron must measure ~5um.
Steel Structure for Tekla
I need a Tekla model of steel structure already designed in Autocad. This modeling must contain all the details of the design sheets, but there is no need to create the design sheets again in the model.
Mosquito Trap Redesign
We want to redesign our UV LED mosquito trap, an outdoor product to be placed in tent, outdoor café, farms to reduce the damage by mosquito. It should be simple, solid, low priced, slim, good quality and fashionable- a mid-way between high-tech and disposable traps. We would like its housing to be partially transparent for the visibility of LED light. Also, we prefer the entry point for mosquito to be a maze design.
Type: Mosquito trap
Target Audience: All age groups
Competitors: enclosed in attachments
Design: Maze entry point, partially transparent body, UV LED light, PCB board, cotton stand to put cotton soaked in mosquito attractant liquid, 2AAA battery case
Material: Plastic
Any software is acceptable if STL format file can be provided
Any further questions, please feel free to comment.
Stanford Baby Products Company - Wipes Holder
I want cool, interesting designs of a holder for baby wipes. Moms hold wet wipes in holders because it's easier to handle & pull wipes from. It will be easiest to simply look at the photos. But, this is a container for people to put wet wipes in for their baby.
I attached photos of competitors. This is just for reference, there is no need to copy them. This is JUST of competitors.
gopinathr1