New and Improved Title Block (2D AutoCAD)Blind
in
CAD Design
held by
Connectronics-Inc.
Last seen:
2020-01-06 19:51:10
Contest Ended, Winner(s) have been selected.
Description:
Our company needs a new and improved title block. This title block will be used primarily for customer-facing drawings. We use AutoCAD LT 2019. All of our CAD drawings are 2D. We use imperial dimensions only.
Wants:
Submissions will be evaluated on their professional appearance, completeness (containing all required elements) and aesthetics. We are attaching a copy of our current title block for reference, and we've highlighted in yellow the items that are required in the new block. We are also including two title blocks from industry peers as reference ("Example 1" and "Example 2", we like the style / simplicity of these two examples. We are also including our logo (jpg format, please let us know if a different format is preferred) to include in the new block.We would like the new title block to incorporate the following elements:
1) Our company logo (see attached file), our address, phone number, contact email, and url.
Our address is: 908 South Walnut Street, Edinburgh, IN 46124
Our phone number is: (812) 526-8801
Our contact email is: sales@connectronicsinc.com
Our URL is: www.connectronicsinc.com
2) Part Number (12 or fewer characters)
3) Revision Level (2 or fewer characters)
4) Part Description (less than 60 characters)
4) CAGE Code: 43608
5) A relatively small block / section for "Additional Notes".
Around the border we would like a small copyright line ("© Connectronics, Inc. 2019 All Rights Reserved") , and also the part number (similar to what is see on the "Example 1" title block attached)
Our current title block uses a font that is difficult to read, we like the fonts used in Examples 1 and 2 but are open to other ideas.
We would prefer that the majority of the title block be on a single drawing layer, with only the following items on a separate layer as they will vary from drawing to drawing: Part Number, Revision Level, Part Description, Date, and the Additional Notes field.
Don't Wants:
Our customers are engineers and purchasing managers. Our title block should not be overly complex or "frilly" (clean and contemporary is preferred).
Ask for Sample:
We will ask the 1st Prize designer to make 1 additional round of edits to the final title block design.
Company Logo:
Yes
Software:
- AutoCAD LT (2019)
Entries
1st Winner
#3 Title Block for Connectronics, Inc
by Chris Rozycki - ENS Design Group
Added two designs with differing fonts. Can be interchanged. I can also make the title block editable via attributes in Autocad and you would just need to populate the required field text/data (ie. project number, cage code, description, etc) and it will automatically populate all the required field (fool proof so you don't accidently miss editing the same field data (ie, project number). Also added dimensions so you can see the allowable design/product area. Anyways, hope you like it. Thanks and keep us posted on your thoughts and ideas to further our designs.
Dec 18, 2019 4:55
2nd Winner
#33 Title Block for ConnecTronics
by GWA
Hello ConnecTronic,
Please find my attached submission for your revised Title Block.
I have kept it as minimal as possible adding the info you requested.
The attached PDF has 3 pages. The first is the finished title block. The second the exact same page, except I have highlighted the text in RED that can be edited. This is because I have created several layers, but I have locked them. This stops things being moved or edited by mistake. You can also turn on/off any layer especially the background watermark if not required and the grey hatched background color.
The third page is just the layers I have created. These can, of course, be put into one layer if required as it is easily done.
Thank you.
Gary Wheatley.
GW Architectural Design.
Please find my attached submission for your revised Title Block.
I have kept it as minimal as possible adding the info you requested.
The attached PDF has 3 pages. The first is the finished title block. The second the exact same page, except I have highlighted the text in RED that can be edited. This is because I have created several layers, but I have locked them. This stops things being moved or edited by mistake. You can also turn on/off any layer especially the background watermark if not required and the grey hatched background color.
The third page is just the layers I have created. These can, of course, be put into one layer if required as it is easily done.
Thank you.
Gary Wheatley.
GW Architectural Design.
Dec 22, 2019 17:27
#23 CONNECT TITLE BOX
by ROCKY17
The most EFFECTIVE and EFICIEN Title Block to inform the whole data about the machine component to every reader
It has an Attractive and futuristic design to integrate with the most fastest progress and profit company . It is CONNECTRONICS
The configurative of each space can be upgrade based on customer need
Thankyou
It has an Attractive and futuristic design to integrate with the most fastest progress and profit company . It is CONNECTRONICS
The configurative of each space can be upgrade based on customer need
Thankyou
Dec 20, 2019 14:30
#37 Autocad Title Block In ANSI A(8.5X11 & 11X8.5)
by Ashok Pundpal
- I have covered all Required points as mentioned by you for new Title Block Template.
- This is Easy To readable .
- Easy to Edit in Single Click.
- Any Non Technical Person also can Read It Easily.
- Hope You will Happy with new Title Block.
It's very Nice Contest Organised by You, i am very enthusiastically done this Task.
Thank You,
Have a nice Day....!
- This is Easy To readable .
- Easy to Edit in Single Click.
- Any Non Technical Person also can Read It Easily.
- Hope You will Happy with new Title Block.
It's very Nice Contest Organised by You, i am very enthusiastically done this Task.
Thank You,
Have a nice Day....!
Dec 23, 2019 18:16
#12 ConnecTronics_Template.dwg
by ChristopherCAD
Hello there, I hope you like my fairly simple title block. I am just beginning so this was good practice if nothing else. My attention to detail is very high, and I would enjoy creating whatever you may need in the future. I would be more than willing to make any changes that you may want to this design. Thank you for your consideration. I look forward to hearing your feedback as it will help me learn an grow. Have a great day.
Dec 18, 2019 20:01
#24 ConnecTronics_Landscape_template_V2R00
by Akash J
Hello buyer,
Hope you like this version of template made as simpler as well as for effective data.
I am ready to do modifications on it and bring you best as best output. If template is finalized by you, I can give you dwg and pdf as well as .dwt file (Actual templates in .dwt format, then only new drawing can be made with this layout).
Thank you.
Hope you like this version of template made as simpler as well as for effective data.
I am ready to do modifications on it and bring you best as best output. If template is finalized by you, I can give you dwg and pdf as well as .dwt file (Actual templates in .dwt format, then only new drawing can be made with this layout).
Thank you.
Dec 20, 2019 17:34
#16 CONNECT TITLE BLOCK
by ROCKY17
The most EFFECTIVE and EFICIEN Title Block to inform the whole data about the machine component to every reader
It has an Attractive and futuristic design to integrate with the most fastest progress and profit company . It is CONNECTRONICS
The configurative of each space can be upgrade based on customer need
Thankyou
It has an Attractive and futuristic design to integrate with the most fastest progress and profit company . It is CONNECTRONICS
The configurative of each space can be upgrade based on customer need
Thankyou
Dec 19, 2019 7:40
Discussion
Dear customer, in submission no. 38, the dashed line outside the border is just to mark template. It can be removed by 1 click and delete option.
Thanks
Thanks
All, I have been thrilled by the entries so far, all very much appreciated. I do want to provide some general feedback - not specific to anyone’s design, but something to consider... I am favoring the more simple and streamlined designs. In the project description, we listed 5 items that we believe were essential to our new title block. The other items shown in our current block are likely not required and not likely to be included in our new design. Thank you all again for your efforts in this contest, I look forward reviewing the entire set of submissions in the coming days and finalizing our new title block!
I have uploaded our logo in .png format. Thank you for the suggestion.
Oh got it.. Thank you buyer for answering.. I will submit my file soon..
We unfortunately do not have Adobe Illustrator on-premises to read .ai file extensions. Adobe PDF would be fine for the initial submission (.dwg/.dxf for final).
The sheet size for this project is ANSI A (8.5" x 11").
Hello buyer,
What is sheet size of template you want? A4 or A2 or ? This detail really needed for any template making..
What is sheet size of template you want? A4 or A2 or ? This detail really needed for any template making..
Do you accept if it is designed in Adobe Illustrator format ? The submission would of-course include in .DWG and .DXF formats along with the .AI format.
I can take care of this for you no problem
I would be comfortable considering a portrait layout (vs. the current landscape format). Although most (all?) of the title blocks in our industry are landscape, I could see a benefit to portrait if it allowed us to use the top portion for the drawing itself, and the bottom half for more text-base technical descriptions of the part. Those technical specifications are typically on a separate page, but interesting idea of rotating to a portrait layout and condensing the two items (drawing and technical specifications) into one page. Again, not married to landscape, just is what we are used to. Also note: most of our parts are "longer" than they are "tall", which may explain why a landscape format is typically used. Another note: the drawings inserted into the title block are now mostly viewed online on a typical (landscape) display. I know that doesn't answer your questions with much conviction, but wanted to share as much about why it is currently landscape format!
Nice contest ;)
Question.. are you married to the landscape layout, or would a portrait layout be acceptable? For small items like this I have seen a shift to landscape so that a standard notebook can be used for hardcopies.
FYI, fonts used in example 1 are Arial Black and Arial Bold with some ArialMT scattered about.
Unfortunately I do not know what font was used in the logo. I could forward the Adobe Illustrator file that has the original artwork, if you are able to open that file format the font used should be visible there.
Hello, please specify the font used in the logo.
Similar Contests on Cad Crowd
Devin Capps
Need to design Front porch and give the house curb appeal.
The perfect 60% mechanical keyboard
SEE BRIEF DOCUMENT
Design the perfect 60% mechanical keyboard, paying close attention to the case. The keyboard case should be slim, sleek and the same colour as the space grey Macbook Pro. Subtle Curves and rounded edges may be effective.
Ship to Ship Loading - CAD freelancer to design schematic diagram
You will design a schematic diagram that shows a ship to ship loading using a conveyor belt. View this video on vimeo to get an idea of what I am trying to convey. http://vimeo.com/16217538
The video is of two ships, side by side with a spacer barge in the middle. The smaller ship is loading the larger ship with a conveyor belt. At 1.03 seconds into the video, you will see a drawing. That's the type of drawing I want. But mine will have measurements of both vessels, the spacer barge, conveyor belt length and angle. I will provide all measurements.
See attached pdf for they type of drawings.
The attached sample will give you an idea of the type of measurements I need on the drawing.
Microvellum to CNC
Hi there I am looking for someone to draft a project in Microvellum to send to CNC
Luxury and Minimalist Ballpoint Pen
Please submit a CAD design for luxury and minimalist ballpoint pen.
Quality, originality, and craftsmanship matters to us. We want the luxury ballpoint pen to have a retractable, twist-action mechanism.
We also want the ballpoint pen to be refillable, using a popular pen ink that can be bought at any major retail store.
We also want the pen to have the brand name logo (either placed on the pen clip or somewhere on the pen). Attached is the AI file for the logo.
These words describe the pen style: Luxury, Business, Sophisticated, Unique, Minimalist.
You must provide the following:
*Your CAD file for the ballpoint pen.
*Product specifications: dimensions/size, colors, and weight.
*Your preferred materials (leather, wood, aluminum, resin, stainless steel, brass, palladium, etc.) and finish for the design.
*Logo placed on the pen clip or somewhere on the pen (Logo AI file attached).
*Would love to see the following color variations of the same design: 1) black 2)silver/steel 3)rose gold
praveen_designs
Designer