Paul John

We have a vacant lot that we are planning to launch as a food truck park. We need design ideas for the layout of the food trucks (6 trucks). We need to figure out best method for getting trucks in and out of the property each day. Each truck needs to have a pad for parking with electric service. We also need to design an outdoor seating area for the food truck park patrons. Covered seating is a must. Picnic tables and sunblock structure with ceiling fans. Also, we need a small structure on the premises for a management office for the park (very small - one room), a small cabana style opening for a bar and two restrooms attached for guests. We'd like the perimeter of the food truck park to be enclosed with only one way in and out for guests and of course and in and out land for trucks. The park will be on the two adjoining lots shown on the attached survey and elevation. Please draw to scale!! We don't have any set-back limitations.

In theory, this is very basic. Although I am just a law student and by no means an engineer of any sort. My idea is to create a tupperware that has slits in a grid like form on the bottom and sides. Additionally there would be slits under the lid. With the grid-like slits, one would be able to put inserts in order to separate there food. with the insert going into the bottom, sides and the lid, there would be a nice seal from any liquids or foods mixing with the others. Obviously, the point of the grid is to be able to create different sized servings and adjust them from bouncing around. Basically, one could put a perfect compact cup of rice, another for veggies etc. The preserving tupperware current on the market do not allow this and one has to purchase a thousand of them. My vision is for it to be able 10 inches in length with a 5 inch witch and about 2.5 inches tall. The top of the tupperware and lid should look similar to your standard rubbermaid tupperware. the walls of the tupperware should not be less or more than 90 degrees. The corners and need to be rounded. The slits them selves should not be to shallow, for that would defeat the purpose of them. My estimation is that they would be about .5 centimeters. Because of the slits, the bottom and sides could/maybe/should form a ridge like surface. (think of ruffles) Lastly, the ridges, or slits should be continuous, at least in my mind around the entirety of the tupperware, which means the lid will need to account for vertical ridges along the walls of the tupperware and still be able to seal it. Although I will not prepay, being the cautious man of law that I am, payment will be given upon the winner being chosen. AND, in the event that my price is significantly low balled and outrageous I will increase it if no one in their right mind would accept it. Thank you.

Race Car Engine Cover Mold. +/- 2 or 3 mm - does not need to be perfection. I have pics and dimensions. Hoping you can scale it off the pics unless you are Local (Atlanta). I will be available during the design for extra pics of measurements. Hoping this will be a 3 or 4 hour draw for some one. We will take the drawing and cut a mold from foam on a large CNC Router and lay up in CF or FG. Here is a link to pictures. https://exoticsalvage.com/02-lotus-esprit-rear-engine-lid-liftgate-db004627

As part of my home renovation I would like to create a stunning and comfortable carbon fibre hammock bath, which will be suspended by two wall mounted supports. The bath will be manufactured by taking the 3D CAD model created by this design contest and creating a wooden blank using a CNC machine. The wooden blank will then be wrapped in carbon fibre cloth for strength, waterproofing and aesthetics. I have some dimensions, weight specifications and other requirements such as the location of the bath filler, bath waste, water pipes and head rest.

Need design of curved staircase for house. I need design with measurements and radius and 3 d sketch.