Sirajuddeen T.

Experience

• Senior Design Engineer Powerind Pvt Ltd · Full-time Aug 2022 – Present 3 yrs 5 mos Bengaluru, KA, India  Design Diesel Generation Piping Routing-Develop detailed and efficient routing plans for diesel generation fuel lines, ensuring compliance with safety standards, minimal pressure drops, and ease of maintenance while coordinating with other utility services.
  
  
   Design the Diesel Generator Room as per DG Ventilation Requirements-Engineer the layout of the diesel generator room to meet proper ventilation and air circulation requirements, considering parameters like heat dissipation, air changes per hour (ACH), and compliance with fire and safety codes.
   Preparation of Steel Structure Support System for the Exhaust Pipe-Create structural designs for supporting diesel generator exhaust pipes, including the selection of suitable materials, load analysis, and anchoring systems to ensure long-term durability and safety.
   Preparation of Shop Drawings for the Entire DG Room-Generate accurate and detailed shop drawings that reflect the final design of the diesel generator room, including piping, equipment layouts, ventilation ducts, structural supports, and other MEP elements, ready for fabrication and installation.
  
  
   Preparation of Material List and Quantity List for the Entire Project-Compile a comprehensive bill of materials (BOM) and detailed quantity take-off sheets for all components involved in the project, facilitating procurement, budgeting, and inventory management.
  
   Discover Innovative Design Solutions for Challenges-Identify design bottlenecks or limitations early in the project and apply creative engineering principles and modern tools to devise effective and cost-efficient solutions.
  
  
   Prepare Comprehensive Reports-Document project progress, technical specifications, design justifications, compliance checks, and risk assessments in clear, organized reports for stakeholders and project management.
  
   Produce BOM and Other Required Documents-Prepare all necessary technical documentation including the bill of materials (BOM), datasheets, specification sheets, installation manuals, and testing procedures required for project execution and quality assurance.
  
   Discover Innovative Design Approaches to Challenges
  Continually explore new methods, materials, and technologies to enhance design efficiency and effectiveness, ensuring the final solution is optimized for performance, cost, and sustainability.
• Design Engineer Ceramed Engineering Ltd · Full-time Mar 2021 – Jun 2022 1 yrs 3 mos Bengaluru, KA, India  Design New Engineering Products and Processes-Develop innovative engineering solutions by conceptualizing and designing new products and processes, taking into account functionality, feasibility, performance, and cost-efficiency.
   Craft Models and Drawings of Products Using CAD-Utilize advanced CAD (Computer-Aided Design) software to create detailed 2D and 3D models and technical drawings that accurately represent design intent, manufacturing requirements, and assembly guidelines.
   Analyze Prototype Data and Retest if Needed-Evaluate data from prototype testing to identify performance gaps or design flaws, make iterative improvements, and conduct additional testing to refine product functionality and ensure it meets design specifications.
   Research New Product Ideas and Methods-Investigate emerging technologies, materials, and manufacturing techniques to inspire product innovation and enhance engineering methodologies, keeping the company at the forefront of industry trends.
   Improve Existing Products and Processes-Conduct detailed analysis of current products and workflows to identify areas for enhancement, applying engineering principles to increase efficiency, reduce costs, and elevate overall product quality.
   Ensure Compliance with the Industry’s Safety Standards-Design and evaluate products and systems in accordance with local, national, and international safety codes and standards, minimizing risks to users and the environment.
   Maintain Accurate Records-Keep meticulous documentation of all design iterations, test results, material specifications, and project changes to ensure traceability, support audits, and assist in future design updates.
   Ensure Products Are User- and Environment-Friendly-Integrate human-centered and sustainable design practices into engineering solutions, ensuring that products are intuitive to use, energy-efficient, and have minimal environmental impact.
   Write Detailed Reports-Produce thorough technical reports covering design processes, test outcomes, material selections, risk assessments, and regulatory compliance, providing valuable insights for stakeholders and project teams.
   Find Creative Design Solutions to Problems-Apply critical thinking and out-of-the-box creativity to overcome design and engineering challenges, delivering practical, cost-effective, and innovative solutions under varying project constraints.
   Present Prototypes and Designs to Customers and Project Managers-Clearly communicate design concepts, functionality, and benefits through presentations, CAD visuals, and prototypes, engaging stakeholders and incorporating their feedback into final designs.
   Produce BOM and Other Required Documents-Generate accurate and comprehensive bills of materials (BOM), as well as supporting documents such as technical specifications, manufacturing instructions, and quality control checklists necessary for project execution.
• Design Engineer Thachalath Group · Full-time Jun 2019 – Jan 2021 1 yrs 7 mos KL, India  Design Release & Fabrication Coordination-Develop and review detailed fabrication drawings and ensure timely release to support project schedules and on-site delivery timelines; provide regular updates to management on design deliverables.
   P&ID Compliance Verification-Validate piping system designs against P&ID (Process and Instrumentation Diagrams) to ensure technical accuracy and system completeness.
   Inspection Coordination-Coordinate with fabrication and construction teams for stage-wise inspections of piping, structures, and equipment installations.
   Safety Integration in Design-Incorporate safety standards and regulatory compliance into all design outputs from concept through fabrication.
   Line Checking & Design Accuracy-Perform design verification and line checking based on isometric and layout drawings to ensure compliance and completeness.
   Material Specification & Traceability-Ensure correct specification of materials, including identification, traceability, and protection measures.
   Component Sizing & Specification-Specify appropriate pipe sizes, schedules, flange ratings, and fitting types in all design documents.
   Quality Assurance in Design-Ensure all design outputs meet quality standards and applicable codes, incorporating QA/QC feedback.
   Workload & Design Activity Monitoring-Collaborate with project teams to align daily engineering outputs with project goals and ensure efficient design activity tracking.
• Design Engineer Herald Marine Products Pvt Ltd · Full-time Oct 2015 – May 2019 3 yrs 7 mos KL, India  Design and Drafting Leadership-Lead the entire design and drafting scope for the running chemical plant, including structural, piping, mechanical, and electrical layouts. Ensure all construction drawings are accurate, comprehensive, and aligned with engineering standards.
   Preparation of Engineering Drawings-Create and update general arrangement drawings, equipment layouts, piping isometrics, structural fabrication drawings, and electrical schematics using CAD and other design tools.
   Coordination with Cross-Functional Teams-Collaborate with process, mechanical, civil, and electrical engineering teams to integrate design inputs and ensure alignment across all disciplines.
   Support Construction and Fabrication-Provide design support during fabrication and construction phases by clarifying drawings, resolving design-related issues, and ensuring accurate implementation on-site.
   Design Review and Modifications-Review and revise construction and as-built drawings based on site feedback and project modifications. Ensure that changes are documented and updated in design records.
   Technical Support for Maintenance-Provide engineering input for maintenance-related modifications and upgrades in plant infrastructure, process pipelines, and equipment layouts.
   Vendor and Material Coordination-Evaluate vendor technical submissions, review equipment layout compatibility, and ensure design integration with supplied systems. Provide design approvals where necessary.
   Quality and Safety Compliance-Ensure that all designs adhere to QA/QC requirements and applicable safety standards. Incorporate HSE (Health, Safety & Environment) considerations into plant design.
   Documentation and Record Keeping-Maintain comprehensive documentation of all design deliverables, drawing revisions, and technical specifications for future reference and audits.
   Project Reporting and Communication-Report design progress, risks, and technical challenges to project managers and senior engineers. Ensure transparent communication throughout the design lifecycle.
• Fabrication Engineer Afcons Infrastructure · Full-time Feb 2015 – Sep 2015 7 mos JK, undefined  Technical Leadership-Provide instructions, guidelines and technical leadership to supervisors and foremen on assigned projects.
   Drawing Review-Review of drawings, designs and recommend changes appropriately pertaining to the various factors and conditions at site.
   Component Layout Inspection-Oversee marking and lying out of fitted components and inspection of girders.
   Team Coordination-Work in liaise with QA/QC, planning team to review quality, ensure safety standards of the work.
   Welding Monitoring-Responsible for monitoring welding, checking parameters, and maintaining proper welding report. (SAW, GMAW, FCAW, MOGGY)
   Progress Reporting-Prepare and maintain project, site and work progress reports.
   Construction Oversight-Monitor and control and construction and operations work and Report to the management.
• Fabrication Engineer Thachalath Group · Full-time Jul 2013 – Jan 2015 1 yrs 6 mos KL, India  Team Coordination-Coordinate and supervise the fabrication and installation team and assign duties for the Forman.
   Construction Management-Plan, organize, direct, control and evaluate construction works, complying with all safety and statutory requirement.
   Health & Safety Compliance-Coordinate and educate the team mates on Health and Safety and ensure full compliance.
   Procedure Development-Prepare the procedures and methods Statements, related to the fabrication and construction jobs.
   Welding & Fabrication Compliance-Ensure proper implementation of welding and fabrication procedures.
   Quality Control & Documentation-Carrying out quality inspection on jobs and prepare and maintain the QA/ QC documentations.
   Progress Reporting-Submission of Daily, Weekly and Monthly Progress Reports to the Management and client.