Hire Surface Modeling Designers in United States

20yrs+ 3D Design-Mechanical-Architectural-Structural-Marine/Boat-Aerospace

20yrs+ 3D Design-Mechanical-Architectural-Structural-Marine/Boat-Aerospace

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, com... Read more

Motivated self employed mechanical designer looking for new clients and projects. Most of my past experience has been DFM, DFA, Plastic part design, injection mold design, sheetmetal part design, complex surface modeling, top down assembly design, and more. I have 20 plus years of Solidworks and ProEngineer experience. I work very well remote with use of tools like zoom meetings, email, phone, etc. I do not mind travel when needed and can provide many references you can speak with about my work history.

I am a technical wizard when it comes to finding solutions to product development problems. In fact, I look at any problem with an eye to finding a solution and are able to turn my deep understanding... Read more

I am a technical wizard when it comes to finding solutions to product development problems. In fact, I look at any problem with an eye to finding a solution and are able to turn my deep understanding of mechanical design into digital 3D models with both speed and consideration for downstream applications. In partnering with my clients, I can work with both the technically minded and those that are more aesthetically driven to come up with designs that meet and exceed expectations. I have worked in the consumer products world for over 20 years and have worked on over 100 products that have made it to market.

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part d... Read more

Creo Parametric expert that is adept with AutoCAD and Visio with OnShape pulling up the rear. Since 2007, I have been modeling and drawing as a full-time career. I am most excited about plastic part design, but I also do machine part design/drafting. My strength is complex surface modeling and 2D drafting per ASME standards.

I am a mechanical engineer with over 15 years of experience. I have a master's degree in mechanical engineering with a focus on robotics and control systems. I am a Certified SolidWorks Professional... Read more

I am a mechanical engineer with over 15 years of experience. I have a master's degree in mechanical engineering with a focus on robotics and control systems. I am a Certified SolidWorks Professional (CSWP). I have experience in part modeling for molded, machined sheet metal and die cast parts. I also have experience in surface modeling and assemblies and engineering drawings. I am also capable of aiding in material selection through calculation and/or simulation.

Hello. I have been a yacht designer and manufacturing engineer for composite yacht production for 20+ years. I am highly skilled in surface modeling, hull form and hydrodynamics. I work in Solidwork... Read more

Hello. I have been a yacht designer and manufacturing engineer for composite yacht production for 20+ years. I am highly skilled in surface modeling, hull form and hydrodynamics. I work in Solidworks, CREO and Rhino3D/Orca3D with licenses. I am a subject matter expert in Composite structures, directional laminate carbon/kevlar/fiberglass layups and epoxies. I am also a avid ocean sailor with 50,000++ miles of open ocean sailing.

I am a CAD addict. I have over ten years of CAD experience, as well as over three years of experience in a product design lab. There I learned to use equipment like FDM and SLA printers, laser cutters... Read more

I am a CAD addict. I have over ten years of CAD experience, as well as over three years of experience in a product design lab. There I learned to use equipment like FDM and SLA printers, laser cutters, CNC mills, and manual lathes.. etc. I have 5 3d printers of my own. I am constantly enveloped in design and prototyping work and I am interested in helping other create their ideas as well.

Senior Staff Engineer RJ Reynolds Tobacco Company Aug 2012 - Present Designing and engineering various products and packages in an R&D environment. Mechanical Design Engineer Hayward Industries... Read more

Senior Staff Engineer RJ Reynolds Tobacco Company Aug 2012 - Present Designing and engineering various products and packages in an R&D environment. Mechanical Design Engineer Hayward Industries May 2010 - Aug 2012 Used SolidWorks to create complex injection molded parts and assemblies. Also generated multi-part blow molded components for Swimming Pool Equipment. Mechanical Design Engineer TIMCO Apr 2008 - May 2010 Used SolidWorks and AutoCAD to create multifaceted sheet metal and plastic parts and complex assemblies and drawings for commercial airliners. Designer TTI / Ryobi Jun 2007 - Apr 2008 Used Unigraphics NX4 to created elaborate injection molded parts and assemblies. Also created die castings for outdoor power equipment motors as well as produced wire routings and schematics. Mechanical Design Engineer B/E Aerospace May 2006 - Jun 2007 May 2006 to June 2007: Mechanical Design Engineer, B/E Aerospace, Winston-Salem, NC. Responsible for many design tasks utilizing Unigraphics NX2 ranging from wire routing to vacuum formed plastic design to sheet metal design. Senior Designer Zimmer Inc. Jun 2001 - Apr 2006 Used Unigraphics V16 thru NX2 to perform an extensive range of Orthopaedic Designs. Created intricate anatomically-correct injection molds of human bone by utilizing free form surface modeling. Was the sole designer in the group and therefore worked on all design aspects of our project that ranged from the afore-mentioned intricate molds to the conceptual design and creation of cutting edge Orthopaedic instrumentation. Aerospace Engineer Bell Helicopter Textron Oct 1999 - Jun 2001 Responsible for creating standard parts for various groups throughout the company using CATIA and Unigraphics V15, maintained BOM (Bill of Materials) accuracy for various aircraft assemblies, worked with Canadian partners to create a database that would allow smooth work flow between the two companies, and performed many other support tasks. Aerospace Engineer The Aerostructures Corporation May 1998 - Oct 1999 Designed wing components for an Airbus aircraft using CATIA. Assigned as the company’s only offsite liaison to its main vendor. In charge of overseeing a smooth work flow between the two companies during the design and construction phases of the BA609 aircraft.

to whom it may concern, My name is Drew Hanavan, and I am a recent graduate in the field of 3d animation which gives me a unique level of skills for all forms of art. I am equipped with the skills ne... Read more

to whom it may concern, My name is Drew Hanavan, and I am a recent graduate in the field of 3d animation which gives me a unique level of skills for all forms of art. I am equipped with the skills necessary to fit any criteria that you need to advance your project to the next level. I specialize in hard surface modeling and feel most comfortable when making beautiful scenic structures and environments. I am, however, capable of doing a wide variety of jobs in the 3d animation field, including skills not simply limited to 3d animation. I am experienced in illustration, which I frequently use for character creation and storyboard, as well as years of experience in Photoshop and other adobe products. I have included my resume below which helps highlight my skills and experience not only in 3d animation but in the general art field.

Hi! My name is Rolando! 🚀 I'm a professional Industrial Designer, Architectural Designer, and self-taught UI/UX Designer with over a decade of experience in the design industry. Being a multi-discip... Read more

Hi! My name is Rolando! 🚀 I'm a professional Industrial Designer, Architectural Designer, and self-taught UI/UX Designer with over a decade of experience in the design industry. Being a multi-disciplinary designer, my clients feel that I bring a great deal of perspective to projects. I'm currently working on something in the luxury cookware space; ask me about it! I can help you with things like: - Design, engineer, prototype, and manufacture your physical product. Working mainly in Fusion 360, I also have experience in Inventor and Solidworks. I can 3D model in solid, surface, or mesh modeling, create a sheet metal layout, molds for injection molding, use generative design (A.I. influenced design) for product iterations, generate product tool paths for 5-Axis CNC machines, perform advanced simulations, build animations, fabricate photo-realistic renderings, and produce technical drawings with bill of materials. I can also use my network of manufactures to ensure we build your working prototype. - Design and 3D model your residential or commercial project. I have been working in the high-end residential space in both Florida and Massachusetts for over six years. Mainly working on projects ranging from 4,500SqFt to well over 17,000SqFt, I can ensure you your house is built exactly as you envision it. For developers, I work on spec homes and can also create floor plan layouts with added options, and unit floor plans for your multi-family projects, including 3D model floor plans for website marketing purposes. - Fully design and prototype mobile apps from front to back using Figma. I mainly design apps for iOS products, but am able to create frames for Android, Google Pixel, and Websites. I can layout a solid product roadmap, sketch low-fidelity wireframes, build user flows, and produce a competitive analysis for your product. I can even generate high-fidelity renderings for marketing purposes. Show people what your app does and how it looks! - Consulting clients is also another option I have available. Sometimes people already know what they want to build and just need help building it. If you have technical drawings, or if you have napkin sketches, I can provide additional support to your team, or help you get your product organized the way you have it figured out. I am extremely passionate about design and really like coming up with new ideas. I've had the opportunity to work with some great founders and always enjoy hearing about startups. Let me know if there is any way I can help you with your product. Looking forward to working with you! 🌱

Mechanical design engineer with 3+ years of experience across a hard-tech startup and a product design consultancy. MS in Design Engineering (Brown/RISD), BS in Mechanical Engineering (Tufts). I spec... Read more

Mechanical design engineer with 3+ years of experience across a hard-tech startup and a product design consultancy. MS in Design Engineering (Brown/RISD), BS in Mechanical Engineering (Tufts). I specialize in early-stage physical product development — taking concepts from rough sketches or ID intent through to engineered, manufacturable geometry. I'm comfortable working across the full development arc: ideation support, proof-of-concept, detailed part and assembly design, DFM, and manufacturing handoff. I put particular care into building CAD models that are clean, well-structured, and easy for others to edit and build on. Particularly drawn to consumer products, softgoods and soft/hard goods integration, and electromechanical systems. I communicate clearly, stay organized, and work well with designers, founders, and cross-functional teams. I'm used to moving fast in resource-constrained environments and figuring things out as I go. CAD: SolidWorks (primary), Onshape, Fusion 360, Creo, AutoCAD (2D & 3D), PDM/PLM What I do well: Parametric and surfaced modeling, translating ID concepts into production-ready geometry, integrating engineering architecture into designed forms, electromechanical prototyping Manufacturing: DFM across injection molding, sheet metal, CNC, and softgoods; rapid prototyping (FDM, SLA, laser cutting, OTS integration); softgoods construction and soft/hard goods integration; experience with CMs and overseas manufacturers

Mechanical Engineering student at ASU specializing in Computational Mechanics, with a strong interest in Product Design, CAD, Simulation (FEA/CFD), and Entrepreneurship. I enjoy solving engineering ch... Read more

Mechanical Engineering student at ASU specializing in Computational Mechanics, with a strong interest in Product Design, CAD, Simulation (FEA/CFD), and Entrepreneurship. I enjoy solving engineering challenges by combining creativity with analytical thinking to build functional, innovative, and efficient solutions. I am on an accelerated track and will graduate in May 2027. I have extensive experience in SOLIDWORKS and Blender, particularly in hard surface modeling and developing assistive products. As the Design and Prototype Lead for a project developing sensory toys for children, I managed the end-to-end process from initial concept art and 3D modeling to physical prototyping and presenting business cases to professional panels.

With over 5 years of specialized experience in the Permian Basin and across Texas, I provide high-precision drafting and design services for the energy and land development sectors. My expertise is ro... Read more

With over 5 years of specialized experience in the Permian Basin and across Texas, I provide high-precision drafting and design services for the energy and land development sectors. My expertise is rooted in the Field-to-Finish workflow, bridging the gap between raw field data and professional engineering deliverables. I don’t just "draw lines"—I understand the underlying data. Whether it’s processing complex point clouds in Trimble Business Center or designing Horizontal Directional Drilling (HDD) sections in AutoCAD Civil 3D, I focus on technical accuracy, regulatory compliance, and clean, organized CAD standards. Technical Expertise: • Energy & Midstream: Pipeline drafting (including the ET-S Permian Pipeline), well pads, and facility as-builts. • Land Surveying: Boundary analysis, ALTA/NSPS Land Title Surveys, and topographic mapping. • Civil Design: Subdivision platting, surface modeling (TIN), and volumetric calculations for earthwork. • Project Leadership: As a former CAD Department Manager, I am highly efficient at managing my own workflows and ensuring all deliverables meet rigorous Quality Control standards. Software Stack: • Expert: AutoCAD Civil 3D, AutoCAD. • Advanced: Trimble Business Center (TBC), Carlson Survey. • Specialized: Field-to-Finish automation and point cloud processing. Why Hire Me? Based in San Antonio, Texas, I am a member of the Texas Society of Professional Surveyors (TSPS) and hold a Texas Real Estate License. This unique combination of skills allows me to navigate property law, easements, and title encumbrances with a level of insight most drafters lack. I am committed to clear communication, rapid turnaround times, and providing "plug-and-play" support for your engineering or surveying team.

Mechanical Design and Reverse Engineering Specialist with over 20 years of experience in industrial CAD design and manufacturing-oriented engineering solutions. I specialize in transforming physical... Read more

Mechanical Design and Reverse Engineering Specialist with over 20 years of experience in industrial CAD design and manufacturing-oriented engineering solutions. I specialize in transforming physical parts, legacy components, technical drawings, scanned data, point clouds, and STL files into accurate, fully parametric, production-ready CAD models. My expertise includes CATIA V5 part design, assembly design, surface modeling, sheet metal design, mold-related design, and reverse engineering of complex industrial components. I have worked extensively with industrial equipment used in oil & gas, power generation, heavy machinery, and manufacturing environments. Services include: • Reverse engineering of pumps, valves, impellers, shafts, and industrial equipment • Point cloud, scan, STL, and CMM data conversion to CAD • 2D drawing (PDF/DWG) to 3D CAD modeling • Surface reconstruction and complex geometry modeling • Manufacturing-ready CAD for CNC machining, casting, and fabrication • Assembly modeling and technical documentation

I design enclosures for electronics. Not gaming cases. Not generic boxes. Clean, slim, real products. I use Solidworks every day. I do surface modeling for the outside shape and solid modeling for ins... Read more

I design enclosures for electronics. Not gaming cases. Not generic boxes. Clean, slim, real products. I use Solidworks every day. I do surface modeling for the outside shape and solid modeling for inside parts. I know how to design for CNC and bent aluminum. I don't add extra space for no reason. Every millimeter matters. I place mounts so they line up and make sense. What I've done: Custom PC enclosures – made them slimmer, cleaned up vents, added recessed buttons Small electronics enclosures – custom PCB mounts, flush front panels Bent aluminum parts – designed for real manufacturing, not just pretty pictures My strengths: Taking messy files and cleaning them up Making enclosures as thin as possible Adding clean vents, buttons, and ports Working fast and replying the same day I keep it simple. I send you the file. You check it. We fix small things.

My expertise lies at a unique crossroads between artistic design and mechanical engineering. As a freelance designer, I offer clients a rare combination: strong creative sensibility, supported by a pr... Read more

My expertise lies at a unique crossroads between artistic design and mechanical engineering. As a freelance designer, I offer clients a rare combination: strong creative sensibility, supported by a practical engineering foundation. For entrepreneurs, artists and inventors seeking to turn a concept into a physical object, I can help take the project beyond design: identifying suitable manufacturers and gathering quotes. My education and early professional career gave me the vital tools for mechanical product design: sound CAD modeling and drawing practices, design for manufacturability, comparing quotes, sourcing and vetting manufacturers, and using a top-down design approach to create solutions which fulfill their performance, space, and cost requirements. I have thrived taking on challenges which call for inventive solutions. Feeling inclined toward more creative expression, I started designing and making jewelry, repurposing my mechanical design background to create innovative gemstone and pearl settings. This evolved into my own fashion brand, carving a niche for high-precision, sculptural-mechanical jewelry and accessories with an otherworldly design language which pays tribute to futurism and science fiction. Past projects ranged from simple one-offs, like a custom acrylic cabinet for home stereo equipment, to the more technically complex, such as the complete redesign of a high accuracy, multi-speed syringe pump for medical research.

Dynamic 3D Modeler | Blender & Maya Expert | Assets, Characters & Product Viz Passionate freelance 3D artist with 3+ years creating high-quality models for games, e-commerce, and product visualization... Read more

Dynamic 3D Modeler | Blender & Maya Expert | Assets, Characters & Product Viz Passionate freelance 3D artist with 3+ years creating high-quality models for games, e-commerce, and product visualization. Proficient in Blender, Maya, Substance Painter, and ZBrush, delivering optimized low-poly assets and photorealistic renders. Skills & Tools: • Organic/hard-surface modeling • UV unwrapping & texturing • PBR workflows • Unity/Unreal integration • Photorealistic product renders Recent Projects: • 50+ e-commerce product models (Amazon, Shopify) • Game-ready character assets (20K-50K tris) • AR/VR furniture visualization Fast turnaround, client-focused, and deadline-driven. Let’s bring your vision to life!

Senior Architectural & Civil 3D Specialist | 20+ Years International Experience I offer high-precision drafting for complex architectural and civil engineering projects, backed by 20 years of global... Read more

Senior Architectural & Civil 3D Specialist | 20+ Years International Experience I offer high-precision drafting for complex architectural and civil engineering projects, backed by 20 years of global industry experience. My background includes landscape design in the Philippines, interior design in Singapore, and specialized Civil 3D drafting in the United States. I specialize in transforming conceptual survey data into professional, "contractor-ready" construction documents. My core technical expertise includes: Civil 3D: Site grading, pipe/utility networks, and surface modeling. Architecture: Floor plans, 3D elevations, and interior space planning. Standards: Clean, organized DWG management and fast project turnaround. Available for hourly consulting or project-based remote work.

Ryan Higdon is a engineer with over 10 years experience in CAD and manufacturing of aerospace and consumer sporting products. Several years in Oakley Inc. R&D and Advanced Product Development Team... Read more

Ryan Higdon is a engineer with over 10 years experience in CAD and manufacturing of aerospace and consumer sporting products. Several years in Oakley Inc. R&D and Advanced Product Development Team developing and new concepts, products, and production processes for mass manufacturing. Over 15 years of fabrication and machining busted knuckles hands-on experience, combined with practical engineering education and technology.

• Civil 3D grading plans and surface modeling • Corridor modeling and roadway profiles • Plan set production and redline updates • WaterCAD distribution system modeling • Fire flow analysis and hydrau... Read more

• Civil 3D grading plans and surface modeling • Corridor modeling and roadway profiles • Plan set production and redline updates • WaterCAD distribution system modeling • Fire flow analysis and hydraulic grade line evaluation • Water network troubleshooting and scenario comparisons • Quantity takeoffs and design support

I graduated from the University of Wisconsin - Madison with a Bachelors in Mechanical Engineering. Since then, I have been in the consumer products industry as a mechanical engineer for the last 17... Read more

I graduated from the University of Wisconsin - Madison with a Bachelors in Mechanical Engineering. Since then, I have been in the consumer products industry as a mechanical engineer for the last 17 years. I worked at Allen-Bradley and Motorola and presently am at Optimal Design, a design firm, for 12 years. I have worked on injection molded plastics, sheet metal, die cast parts etc ranging from routers to power tools to cell phones to tupperware. I have extensive experience with the 3D CAD software Creo (was Pro/Engineer) and Solidworks. Lastly, I am a licensed professional engineer in Illinois.

40 years experience in design and manufacturing. 22 years in CAD design, 18 years prior as a master tool maker/ mold maker. Experience in Solidworks, ProE/Catia, UGNX, SDRC, Autocad Mechanical Deskt... Read more

40 years experience in design and manufacturing. 22 years in CAD design, 18 years prior as a master tool maker/ mold maker. Experience in Solidworks, ProE/Catia, UGNX, SDRC, Autocad Mechanical Desktop, HP ME30. Product design, sheetmetal, plastic molded part, print engines, large assemblies, communication devices, bio medical equiptment, molds, dies.

Ohio State grad with BSME, working on MBA at Eastern U., passed FE and working on PE, have 4 years exp. in machine design in automotive and explored project management, process and product design for... Read more

Ohio State grad with BSME, working on MBA at Eastern U., passed FE and working on PE, have 4 years exp. in machine design in automotive and explored project management, process and product design for 2 of those years, as well I design organic shapes as a side project for coworkers

I have a strong background in Stamping. My experiences include Die design for Tesla Motors, Gauge and Fixture Design for CG Automation, and currently FEA and Process Engineering for Toyota Motors. My... Read more

I have a strong background in Stamping. My experiences include Die design for Tesla Motors, Gauge and Fixture Design for CG Automation, and currently FEA and Process Engineering for Toyota Motors. My Skills include Catia Surfacing, Process development, FEA, NX for Die Design and surfacing, and Rhino3D for rapid prototyping.

I'm a mechanical engineer and industrial designer with 10 years of experience designing complex parts in the sporting goods industry. I've passed both the Solidworks Certified Professional and A... Read more

I'm a mechanical engineer and industrial designer with 10 years of experience designing complex parts in the sporting goods industry. I've passed both the Solidworks Certified Professional and Advanced Surface Modeling exams. I'm confident that I can build just about anything quickly and efficiently.

I am a Mechanical and Systems Designer with experience in the aerospace and automotive industries, and am currently offering freelance CAD services while building my own startup. I enjoy taking on nov... Read more

I am a Mechanical and Systems Designer with experience in the aerospace and automotive industries, and am currently offering freelance CAD services while building my own startup. I enjoy taking on novel and complex challenges, and would be happy to help you achieve an optimal design solution for your project! My relevant design experience: - Class A Surface Modeling - Machine Design - Robotic End-Effectors & Automated Systems - Vehicle Prototypes

AutoCAD/Civil 3D technical Proficiency, Design Efficiency, Data Integration, Surface Modeling, Alignment and Profile Design, Corridor Modeling. Pipe Network Design and Plan Production. Worked on multi... Read more

AutoCAD/Civil 3D technical Proficiency, Design Efficiency, Data Integration, Surface Modeling, Alignment and Profile Design, Corridor Modeling. Pipe Network Design and Plan Production. Worked on multiple USACE projects as well as Sound Transit, NMDOT and Land development.