Hire Plumbing Design Designers in United States

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plum... Read more

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plumbing systems that pass plan review the first time. Expertise: Mechanical Engineering Design HVAC load calculations (Elite Software) – Ducted & ductless systems – VRF, split, rooftop, air-source heat pumps Plumbing Design for residential and commercial Buildings Electrical Design for residential and commercial Buildings Energy modeling – Title 24 energy estimation report COMcheck, REScheck, MEP coordination – clash-free Revit models, Fire protection – sprinkler hydraulic calcs, standpipe layouts (NFPA 13/14) Low-voltage – fire alarm, security, AV, nurse-call (NICET-ready) What I Deliver Fully stamped MEP sets (PDF + editable CAD/Revit) Code-compliant designs (IBC, IMC, IPC, NEC, IECC, state amendments) Fast 5–7 day turnarounds on most residential & light-commercial projects Two revision round included; additional at fixed rates Typical Projects Single-family & multi-family residential Retail shells, restaurants, offices < 20,000 sf MEP Tenant improvements & Renovations Data centers, warehouses, medical offices Software & Standards Revit 2025 | SolidWorks 2025 | RHVAC and CHVAC from Elite Software Why Clients Hire Me Since my plans are approved by the city on the first submission, I cover all the city amendments at no additional fee. One-stop stamping – no juggling multiple state PEs Very cost-effective pricing – flat fees or Hourly Zero surprises – I flag code conflicts before submittal Let’s get your plans approved. Upload your architectural set or sketch; I’ll return a firm quote within 24 hours.

I am a Mechanical Engineer that works in plumbing design, but have always loved using 2D/3D modeling CAD software. I have multiple years of experience in SolidWorks and multiple AutoDesk products, so... Read more

I am a Mechanical Engineer that works in plumbing design, but have always loved using 2D/3D modeling CAD software. I have multiple years of experience in SolidWorks and multiple AutoDesk products, so that is where I thrive. I can do pretty much any task you desire from a small piece or gear for a motor, to generating full 3D models and layouts. I am currently trying to build up my portfolio, so I am offering low prices for a limited time and am super flexible with fares and delivery times. Please feel free to reach out to me!

Degree in Architecture with Minor in Urban Design Specialising in Sustainable IFC and CMU Residential Design, ADUs, Garage Conversions, Kitchen and Bath Expert, Aging in Place US Experience - Model H... Read more

Degree in Architecture with Minor in Urban Design Specialising in Sustainable IFC and CMU Residential Design, ADUs, Garage Conversions, Kitchen and Bath Expert, Aging in Place US Experience - Model Homes Development, Private Residences, Apartments, Townhouses Caribbean Experience - Commercial, Industrial, Residential, Small Scale Health and Sacred Projects

I have over 5 years of experience drafting Mechanical building system designs in Autodesk Revit, along with some plumbing design experience. I am great at turning engineer redlines into fully coordina... Read more

I have over 5 years of experience drafting Mechanical building system designs in Autodesk Revit, along with some plumbing design experience. I am great at turning engineer redlines into fully coordinated 3D models to produce construction documents and asset model deliveries for projects. Please find me on LinkedIn!

I have 25 years experience providing Cad and design services using AutoCad, Microstation, Revit, and Cadworx for plumbing, fire protection, irrigation, HVAC, electrical, strcutural, civil, oil and gas... Read more

I have 25 years experience providing Cad and design services using AutoCad, Microstation, Revit, and Cadworx for plumbing, fire protection, irrigation, HVAC, electrical, strcutural, civil, oil and gas, structural systems.

18 years of experience designing and drafting using every version of AutoCAD. Currently running AutoCAD 2017. Architectural, mechanical, electrical, plumbing, civil plans, details, sections, elevation... Read more

18 years of experience designing and drafting using every version of AutoCAD. Currently running AutoCAD 2017. Architectural, mechanical, electrical, plumbing, civil plans, details, sections, elevations, specs. Expertise in retail construction design, interior fit outs, etc, starting design departments from scratch. Own self-created libraries for design departments start-ups. 7-1/2 year military veteran, war veteran.

I am a detail-oriented Mechanical Engineer with over 18 years of hands-on experience in designing, analyzing, and optimizing mechanical systems across residential, commercial, and industrial projects.... Read more

I am a detail-oriented Mechanical Engineer with over 18 years of hands-on experience in designing, analyzing, and optimizing mechanical systems across residential, commercial, and industrial projects. My expertise spans 3D CAD modeling (SolidWorks, AutoCAD), HVAC system design, product development, FEA simulation, and manufacturing process planning. Whether you need a precision-engineered component, a complete HVAC layout, or production-ready drawings, I deliver efficient and cost-effective solutions that meet both technical and regulatory standards. Key Skills: 2D/3D CAD Design (SolidWorks, AutoCAD, Fusion 360) HVAC & Plumbing Design Product Development & Prototyping Finite Element Analysis (FEA) GD&T & Tolerance Stack-Up Technical Documentation & BOM Creation ASME & ISO Standards Compliance Let’s work together to bring your mechanical ideas to life with precision and innovation.

I am a mechanical designer who specializes in HVAC and Plumbing. My work experience spans over 100 jobs large and small, from larger multi-million dollar projects (such as wastewater treatment facilit... Read more

I am a mechanical designer who specializes in HVAC and Plumbing. My work experience spans over 100 jobs large and small, from larger multi-million dollar projects (such as wastewater treatment facilities and Schools) to smaller renovation projects (such as retail tenant space fit-out). I also have 20 years of CAD experience.

I'm an Autodesk Revit MEP Certified Professional. My responsibilities include firm-wide CAD, Revit MEP modeling, BIM 360 Docs, Navisworks software standards development, implementation, training, coor... Read more

I'm an Autodesk Revit MEP Certified Professional. My responsibilities include firm-wide CAD, Revit MEP modeling, BIM 360 Docs, Navisworks software standards development, implementation, training, coordination, technical support, and HVAC designs.

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling an... Read more

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling and testing of materials and their implementation. Previous designs in the field of aerospace engineering include the design of a high pressure air system required to test a flight vehicle in high altitude conditions. The high pressure air system required pressure vessels to sustain the operation of the test, and were calculated to be too costly, however using recycled vessels were considered. The recycled vessels then needed to be tested before being put into service on the system. This meant cutting several critical failure sections of the pressure vessel and sending it for tensile, compression, modulus lab data. This data would then need to be scrutinized to the calculated data based on pressure vessel code and good design practice, safety factors etc. The delivery system was then modeled in ProE Creo software to be delivered to in-house machinists for material ordering and assembly, but not until modeled in AnSYS modeling comparison. This system was successfully commissioned by a engineering team effort with my design engineering assistance. Creating databases to clearly log product data, quality reports, team performance, and work load is also one of my skills using Microsoft Office Access. The custom code i wrote in VBA to easily track and print weekly data that would be discussed at design meetings in an effort to improve overall team efficiency. Using ProE to design flight vehicles for test models was also a key piece of experience to tune my design experience in fluid dynamics. As the design went from pencil and paper theoretical calculations, they were transformed into models, later tested by my team and then a full size model delivered to the customer, NASA, for field testing. Many points of aeronautical engineering experience resides in the modeling done in ProE Creo/Wildfire to develop testing models. My mechanical engineering design experience comes from a firm mostly pitched towards the development of public & private schools. We design the mechanical, HVAC, electrical, plumbing and fire protection, and civil systems. All of the engineering is done "in the same house" as the architectural design. My experience circumvents all of the engineering trades in accordance with NYS education code, the supplements, and the current IMC. Designing systems in my current atmosphere allow for the full design to be implemented without value engineering the design like an EPC. Though EPC's are also part of the job. Mechanically, I have designed HW/Steam boiler rooms, AHU systems, VRF, and the like. My fire protection experience stemmed from my family business, meaning i physically installed many types of plumbing systems and fire protection systems; it is a critical component to influence my design practice in HASS and/or AutoCAD. Many engineers call it "the third eye." My plumbing design experience resides in all types of waste and domestic systems for commercial kitchens, assisted living facilities, schools, large residences and small, also churches. As much as possible, I use my local contacts in the gas, electrical and water utilities to make my designs as solid as possible. All of my MEP & FPE design are based on maintaining code requirements while not having the customer pay for unnecessary equipment etc.

I am proficient in 2D and 3D plumbing design as well as basic drafting needs, such as floor plans. I also have experience with 3D modeling.

I am proficient in 2D and 3D plumbing design as well as basic drafting needs, such as floor plans. I also have experience with 3D modeling.

I hold a degree in Architectural Engineering with a focus on Mechanical design and have been pursuing a career as a Professional Mechanical Engineer for the last 10 years. My professional experience... Read more

I hold a degree in Architectural Engineering with a focus on Mechanical design and have been pursuing a career as a Professional Mechanical Engineer for the last 10 years. My professional experience has given me the skill set to provide services such as developing construction documents, 3D modelling and construction coordination, as well as Revit content creation and management. Majority of my experience is with large industrial projects, that requires complex coordination between many mechanical systems. Expertise in Revit modeling and AutoCAD drafting for Mechanical systems, including HVAC, Plumbing and Utility Piping. Skill set includes MEP 3D modeling, detailing, construction document creation (for all design phases), Revit management (families, parameters, etc.), and BIM 360 project management.

I have been using AutoCAD and Revit for about 9 years now and I am well versed in all product features and functions. I utilize drafting software primarily for building design - specifically HVAC and... Read more

I have been using AutoCAD and Revit for about 9 years now and I am well versed in all product features and functions. I utilize drafting software primarily for building design - specifically HVAC and Plumbing. I’m up to speed in the latest BIM 360 technologies for coordination amongst multiple consultants. I’m also a licensed professional mechanical engineer with stamps in KY, OH, FL, TX, MI, OR, and TN. I have a full understanding of HVAC and Plumbing design.

MEP Experience: • Designed & drafted/modeled mechanical & plumbing systems for large commercial & highrise projects • Lead team as Project Manager/Mechanical Lead on various projects • Project manage... Read more

MEP Experience: • Designed & drafted/modeled mechanical & plumbing systems for large commercial & highrise projects • Lead team as Project Manager/Mechanical Lead on various projects • Project management • Trane Trace 700 • ASHRAE ventilation standards (e.g. 62.1 single & multi-zone calculations) • Experience with LEED projects • Energy models for LEED projects • Experience sizing, selecting, and implementing all types of DX type HVAC equipment into projects (e.g. DX Split Systems, RTU's, VRF, ect.) • Experience sizing, selecting, and implementing all types of chilled water systems on projects (e.g. Chillers, Coolings Towers, Fluid Coolers, Pumps, Heat exchangers, ect.) • Knowledge implementing energy efficiency measures into projects (e.g. energy recovery cores/wheels, heat pipes, ect.) • Experience implementing all types of code knowledge and design calculations into projects (e.g. ASHRAE 90.1, 62.1, IMC/ UMC, IECC, NFPA, IPC/UPC, air/water pressure drop, hydronic system calcutions, ect.) • Knowledge/Experience with smoke control systems (e.g. stairway pressurization, smoke control, fire pump sizing) • Experience with Construction Administration (e.g. BIM clash detection meetings, RFI's, Submittals, ect.) • Performed studies for existing hydronic systems & developed system schematics for clients to troubleshoot existing issues • Creating control system sequences/diagrams • Constructing custom excel calculation spreadsheets for increasing workflow on highrise projects • Curve/surface fitting for pipe/duct fitting automation processes • Software capabilities: Trane Trace 700, Trane Trace 3D Plus, AutoCAD, Revit, Dynamo (Knowledgable), Microsoft Office, Bluebeam Studio, COMcheck, PipeFlo (Knowledgeable), Navisworks

Have worked in the engineering field for over 18 years. I have done everything from permit work to fabrication. I can produce either 2D or 3D drawings using AutoCAD. I am fast and detail oriented. I b... Read more

Have worked in the engineering field for over 18 years. I have done everything from permit work to fabrication. I can produce either 2D or 3D drawings using AutoCAD. I am fast and detail oriented. I believe I can produce any drawings requested by my future employers. I am very knolegeable of various other software as well.

Born in Cadiz, Spain, I always had a passion for design and manufacturing. Nurturing this passion started with recreational boating where I learned about design and building from an incredible master... Read more

Born in Cadiz, Spain, I always had a passion for design and manufacturing. Nurturing this passion started with recreational boating where I learned about design and building from an incredible master builder. Shortly after, I joined an architectural firm on which I also developed a taste for construction and its intricacies. I was exposed to everything from blueprints to the production of scale models (maquettes). During this time, I also obtained a certificate as a Solar Project Designer through Censolar. I also worked in plumbing designing water systems for irrigation, pools, residential sanitary water, and a few other projects. My interest in design had just begun and there was a long and interesting road ahead of me. Years later in 2003, I moved to the US where I married my wife, with whom I share a beautiful kid. Moving here opened many doors and I dove into these opportunities head first. In 2004 I joined ACC and attained an AA in Mechanical Design, and from then on I have developed upon that skill. My design exposure since moving to the US has been as follows: * National Instruments, involved in virtual instrumentation design. * Alpha Slip Rings, designing custom commutators for oil drilling, radars, etc. * Sisu Devices, robots and industrial automation. * Biomedical design for Global. * Thermal tooling and mechanical solutions design for Intel, CNC machining, and where I also lead the board repair lab.

Plumbing Designer with 23+ years of experience delivering plumbing system designs for a wide variety of projects, including healthcare facilities, clean rooms, laboratories, commercial buildings, educ... Read more

Plumbing Designer with 23+ years of experience delivering plumbing system designs for a wide variety of projects, including healthcare facilities, clean rooms, laboratories, commercial buildings, educational institutions, and residential developments. Skilled in developing cost-effective, code-compliant systems such as waste/vent, grease waste/vent, lab waste/vent, storm drain, natural gas, compressed air, lab vacuum, hot/cold water. Adept at coordinating with architects, engineers, contractors, and code officials to ensure fully integrated, constructible solutions.

* AUTOCAD 3D Modelling, BIM 360, REVIT MEP fabrication, TRIMBLE Sysque, and Estimation. * Bluebeam, Bluebeam Studio. * Trane Trace 700 * Carrier HAP * Project Managing * HVAC, Mech. Piping and Plum... Read more

* AUTOCAD 3D Modelling, BIM 360, REVIT MEP fabrication, TRIMBLE Sysque, and Estimation. * Bluebeam, Bluebeam Studio. * Trane Trace 700 * Carrier HAP * Project Managing * HVAC, Mech. Piping and Plumbing Design * Leadership and Mentorship * Mechanical Engineering. * Staff Training & Development. *NAVISWORKS for 3D coordination. * EVOLVE. * Autodesk ACC * FIM: MAINSAVER, ARCHIBUS, MCLAREN. * PROCORE.

I have 6.5 years of plumbing design experience. I have done multi-living l, K-12, and various commercial projects. I am proficient in sizing and designing domestic water cold /hot water supply, sanita... Read more

I have 6.5 years of plumbing design experience. I have done multi-living l, K-12, and various commercial projects. I am proficient in sizing and designing domestic water cold /hot water supply, sanitary sewer, storm sewer, natural gas, grease/oil/acid waste systems.

I have been working for a design build firm in St Louis since 2013 using Revit and AutoCAD. I have been picking up markups pertaining to architecture, plumbing and mechanical disciplines for 6 years.... Read more

I have been working for a design build firm in St Louis since 2013 using Revit and AutoCAD. I have been picking up markups pertaining to architecture, plumbing and mechanical disciplines for 6 years. In my spare time I convert sketches into AutoCAD for home remodels. I also have experience with plumbing design. I have worked on various types of projects including housing, education, hospitals, etc

A very experienced mechanical engineer with over 12 years invaluable experience of successfully Design and completing projects from conception to completion.

A very experienced mechanical engineer with over 12 years invaluable experience of successfully Design and completing projects from conception to completion.