Hire PCB Design Designers in United States

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contr... Read more

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contract Roles

I attend Kettering University, a predominately engineering university once named General Motors Institute. From there I got a top class education paired with 3 years ofwork experience in my field. Whi... Read more

I attend Kettering University, a predominately engineering university once named General Motors Institute. From there I got a top class education paired with 3 years ofwork experience in my field. While a lot of my work was hands on, I acted as my companies only CADD professional throughout my entire work experience. I am more than able to create any design you can imagine.

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsda... Read more

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsdale, AZ. ► Designed & Engineered WORLD'S most advanced luxury wallet, medical equipment, industrial components, products & more at: ♦VIEW PORTFOLIO & EXHIBIT:♦ w w w . lovesobhani . c o m From napkin-sketch to fully-functional final prototype, he's been there every step of the way. He's designed & engineered entire products (electrical, software & mechanical aspects) for nearly a decade on a contractual basis with prophetic proficiency. This created a multi-specialty Prototype & Design Engineer that is a super talented, professional expert with many intricacies of: ► Product Design & Engineering ► CAD Modeling ► ElectroMechanical Design & Engineering ► Realistic Rendering ► DFM (Design for Manufacture) Techniques ► Component Design ► Circuit & PCB Design ► Product Development & Optimization ♦ FULL PROFESSIONAL EXPERIENCE: ♦

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product developm... Read more

I am a graduate of EE engineering. I have over 30 years experience in the engineering industry touching many disciplines. I have passion for industrial controls, power, automation and product development...even the most complex ones. Reach out, let's get it done!

* Am able to mentally envision how a new piece of electronic gear is put together and then by using both the SolidWorks Premium and the CADENCE/OrCAD "OrCAD X" programs, can then perform both the mech... Read more

* Am able to mentally envision how a new piece of electronic gear is put together and then by using both the SolidWorks Premium and the CADENCE/OrCAD "OrCAD X" programs, can then perform both the mechanical and PCB-designs required to create either a prototype and/or a "First-Article-Build" of a new product designs. * Able to -- convert/translate -- a schematic diagram into a BOM of "actual physical reality components" which can be sourced by multiple suppliers and vendors and/or fabricated as a "custom" designed part as is necessary. * Able to both specify and source multiple outside vendors for all purchasing requirements. * Can easily communicate and interface with multiple outside suppliers and vendors and also be the "contact person" for all of these external/outside companies. * Have also acted as an "Electronics Purchasing Agent" and have personally purchased over $3,000,000.00+ worth of electronic components, hardware and outside vendor services (i.e. cable & wiring assemblies & sheet-metal and PCB fabrication services). * Under the correct conditions and leeway, it is possible for me to take a schematic diagram and do -- ALL -- that is necessary to provide a client company with a completely finished physical product of which they can either hold in their hands or be mounted into a 19" equipment rack. I've done this before!!! /

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

I’m a PCB Design Engineer with over 10 years of professional experience in electronic hardware development. Throughout my career, I have successfully designed and delivered numerous industrial control... Read more

I’m a PCB Design Engineer with over 10 years of professional experience in electronic hardware development. Throughout my career, I have successfully designed and delivered numerous industrial control systems, IoT modules, communication boards, power electronics, and mixed-signal circuits From schematic conception and component selection to PCB layout, Gerber generation, DFM review, and prototype testing.

Mechanical Design Engineer Working for an automotive lighting supplier. 5000 hours of CATIA V5 experience.

Mechanical Design Engineer Working for an automotive lighting supplier. 5000 hours of CATIA V5 experience.

I'm a US-based RF design engineer with 17 years of experience delivering high-performance solutions in the aerospace/defense industry. I hold a PhD in Electrical Engineering and specialize in RF syste... Read more

I'm a US-based RF design engineer with 17 years of experience delivering high-performance solutions in the aerospace/defense industry. I hold a PhD in Electrical Engineering and specialize in RF system design, PCB layout, antenna design, electromagnetic analysis, and rapid prototyping. Tools I work with include Keysight ADS (primary), KiCad (when preferred), MATLAB, and Python. I follow IPC standards for design/fab to ensure the quality of the end product. My work is ideal for companies looking to outsource complex RF, CAD, or electromagnetic challenges that require deep technical insight and a precision-driven process. I'm available full-time or part-time, can support any US time zone. Let’s talk if you need dependable, senior-level RF expertise without the overhead of full-time staffing.

I am a Purdue engineer with experience in AutoCAD design and modeling. I'm known for delivering innovative solutions and strong results even within tight deadlines, I combine technical expertise with... Read more

I am a Purdue engineer with experience in AutoCAD design and modeling. I'm known for delivering innovative solutions and strong results even within tight deadlines, I combine technical expertise with strong communication skills to drive successful outcomes for my clients

Experienced electrical designer specialized in: -Rapid Prototyping -Firmware Development. -ECAD Schematic Capture. -Multi-Layer PCB Design. -LT Spice Simulation

Experienced electrical designer specialized in: -Rapid Prototyping -Firmware Development. -ECAD Schematic Capture. -Multi-Layer PCB Design. -LT Spice Simulation

I am an embedded systems engineer specializing in firmware development and hardware integration for IoT and microcontroller-based systems. I have experience working with ESP32, STM32, and AVR (ATmega... Read more

I am an embedded systems engineer specializing in firmware development and hardware integration for IoT and microcontroller-based systems. I have experience working with ESP32, STM32, and AVR (ATmega) platforms, developing reliable firmware for real-time and low-power applications. I focus on building practical embedded solutions including sensor integration, communication protocols (UART, I2C, SPI, MQTT), and system debugging. I also work with PCB design and hardware prototyping, ensuring smooth integration between firmware and circuit design. My goal is to deliver clean, efficient, and maintainable embedded solutions that meet real-world product requirements. ⚡Skills & Expertise⚡ - Microcontrollers: ARM (STM32, NXP), AVR, PIC, ESP32, Arduino, Raspberry Pi - Programming Languages: C, C++, Embedded C, Python (for prototyping/testing) - RTOS & Firmware: FreeRTOS, Zephyr, Bare-Metal, HAL/LL Drivers - Connectivity: Bluetooth (BLE), Wi-Fi, LoRa, Zigbee, MQTT, Modbus - Protocols: SPI, I2C, UART, CAN, USB, RS-485 - PCB Design: Altium Designer, KiCad, Eagle - Debugging Tools: JTAG, SWD, Logic Analyzers, Oscilloscopes - Simulation & Modeling: MATLAB/Simulink (if applicable) ⚡Services I Offer⚡ - Firmware development from scratch or modification - Embedded system prototyping and product design - Driver development for sensors, displays, and communication modules - IoT solutions: Edge device programming + Cloud integration - PCB design and hardware validation - Optimization of power, memory, and processing usage - Debugging and troubleshooting hardware/software issues ⚡Why Hire Me?⚡ - Timely Delivery - Clean, well-documented code - Long-term support and maintenance - Open communication & flexibility - End-to-end embedded product support I’d love to hear about your project. Whether you're building from scratch or improving an existing system, I can help bring your ideas to life.

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important tha... Read more

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important that I want to share with you today. For most of you reading this, hiring an electrical engineering freelancer or contractor has been a struggle to say the least. You have likely lost a great deal of money only to receive a sub-marginal product. Constant change orders, redraws, slow work, missed deadlines, failing “cross-functional” teams, no quality assurance, and huge bills are just a few examples. I would imagine that you are feeling very frustrated, confused, and maybe even a little humiliated. Does this sound about right? You are correct to be worried, because many people get screwed over when they hire an engineering contractor. But what if I told you there is one thing, just one thing you could do to flip the script? It is as easy as sending me a message on Cad Crowd. I am an American entrepreneur, electrical engineer, and trusted consultant. I am an accomplished expert with nearly a decade of experience in the electrical engineering industry. As a knowledgeable professional with experience in the nuclear industry, I have had serious involvement with numerous quality-dependent, critical power and control systems. Within five years of graduating from the prestigious Clarkson University with a Bachelor of Science Degree in Electrical Engineering, in addition to minors in both Computer Science and Mathematics, I obtained experience at a multinational technology company and also rapidly became a trusted, lead analytical engineer at Indian Point Energy Center. Today, I help individuals and entrepreneurs maximize their profits by increasing their technical expertise. Once we are both interested in working together on a project, before you even spend a penny, I offer a free, no-obligation video conference kick-off meeting to eliminate any reasonable doubt that we are a perfect match for each other. When working with me, you get to save money on high-quality services. If, like for many cash-constrained businesses, your budget is under scrutiny, you may be forced to rationalize your procurement model. Traditional consulting firms are just not agile enough to adapt. Red tape strangles engineers in many firms. Do not overspend on a wasteful system. Embrace the cost reductions! It is the only way to accelerate your growth and wealth! When working with me, you have access to a quick, easy, and convenient hiring process. In the engineering services sector, most businesses still rely heavily on localized industry experts, consulting firms, and in-house talent. These engineers are often experts, but their geographic proximity to their clients is more often their greatest fortune. The process for procuring my service is extraordinarily quick and simple. I embrace business flexibility. All you need to do is send me a brief message on Cad Crowd! When working with me, you get clarity and security. The payments involved are clearly defined upfront. You do not assume the risk that a firm might claim to be starting a project, take a deposit, and then not deliver. There is no reason not to act now. Your co-workers will rave about your success! When firms change engineers during the project, team turnover can put projects of any size at risk. Throughout the process, one or more team members leaving could result in a project failing if the knowledge and talent walk out the door. When working with me, you know that I am going to be the one working on your project from start to finish with an outcome driven mindset. Visit the link below now to check out my website and see why businesses come to me for solutions. I want to help you, but I am a busy guy and do not have much time to add additional projects to my plate. Do not wait until it is too late. Do not continue to struggle day to day to ensure your market dominance and make a sustainable profit. Everyone knows that we needed our independent expert opinion and design solutions yesterday. Make your life easier. Send me a message on Cad Crowd now to get your project started! I will talk to you soon.

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industr... Read more

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industrial projects

I am an Electrical Engineer specializing in Embedded Systems with extensive experience in designing intelligent electronic products from concept to production. My expertise spans embedded firmware dev... Read more

I am an Electrical Engineer specializing in Embedded Systems with extensive experience in designing intelligent electronic products from concept to production. My expertise spans embedded firmware development, PCB design, hardware prototyping, IoT integration, and complete product development. I focus on building reliable, high-performance solutions for industrial automation, consumer electronics, healthcare, robotics, and smart connected devices. Core Expertise Embedded Systems & Microcontrollers: STM32, ESP32, Texas Instruments (Tiva C, C2000, MSP430), NXP LPC & i.MX RT, Nordic nRF52/nRF53, Microchip PIC32 & dsPIC, Raspberry Pi, Arduino. Firmware Development: Embedded C/C++, FreeRTOS/RTOS, Bare-Metal Programming, Bootloaders, DMA, Interrupts, Peripheral Drivers, Low-Power Optimization. Communication Protocols: UART, SPI, I2C, CAN, USB, Ethernet, BLE, Wi-Fi, LoRa, Zigbee, MQTT, Modbus, RS-232/RS-485. PCB Design: Multi-layer PCB design using Altium Designer, KiCad, Eagle, EasyEDA, and Target. Experienced in RF layouts, high-speed routing, power electronics, and EMC/EMI considerations. FPGA Development: Verilog and VHDL for digital logic design, signal processing, and hardware acceleration. Power Electronics & Control Systems: Motor control (PID, FOC), power management, industrial automation, and embedded control applications. Biomedical & Industrial Electronics: Embedded hardware and firmware development for medical devices, sensors, monitoring systems, and industrial equipment. Mechanical Design: 3D CAD modeling, enclosure design, and prototype-ready mechanical assemblies. Complete Product Development I provide end-to-end engineering services to transform ideas into production-ready products. Product Architecture & System Design Electronic Circuit Design & Schematics Embedded Firmware Development Custom PCB Design & Manufacturing Support Prototype Development & Hardware Testing IoT Connectivity & Cloud Integration Wireless Communication Implementation Production Support & Design Optimization IoT & Smart Devices I develop secure and scalable connected products using: Wi-Fi, BLE, LoRa, Zigbee MQTT, REST APIs, WebSockets Edge Computing Real-Time Monitoring Systems Cloud Connectivity Remote Device Management Software & Cloud Integration Beyond embedded development, I also assist with software solutions that complement hardware products. Desktop & Embedded Applications IoT Dashboards Cloud APIs Mobile Device Integration Data Logging & Analytics AWS, Microsoft Azure, and Google Cloud integration Industries Served Industrial Automation Consumer Electronics Internet of Things (IoT) Robotics Automotive Electronics Medical Devices Smart Home Systems Energy & Power Electronics Wearable Technology Research & Development Why Work With Me? Strong background in embedded hardware and firmware Production-ready PCB and electronic design experience Clean, optimized, and maintainable firmware Reliable communication and on-time delivery End-to-end support from concept through manufacturing Focus on quality, testing, and long-term product reliability Whether you need firmware development, PCB design, embedded software, IoT integration, or complete electronic product development, I am committed to delivering innovative, efficient, and dependable engineering solutions that meet your technical and business goals.

I’m José Puga, a Mechanical & Mechatronics Design Engineer driven by the intersection of precision engineering, automation, and creativity. I specialize in designing and prototyping intelligent system... Read more

I’m José Puga, a Mechanical & Mechatronics Design Engineer driven by the intersection of precision engineering, automation, and creativity. I specialize in designing and prototyping intelligent systems — from custom actuators and motion control assemblies to complete electromechanical mechanisms. My background blends mechanical design, embedded electronics, and control systems, allowing me to approach every project as a complete system — not just a CAD model. Whether it’s developing 3D-printable prototypes, integrating sensors and PCBs into mechanical structures, or optimizing designs for manufacturability, I build solutions that are both functional and production-ready. I’ve worked on projects involving: 3D modeling & product design (SolidWorks, Fusion 360, OnShape) Motion systems & robotics (SCARA arms, linear actuators, servo systems) HMI integration & control interfaces (Nextion, Arduino, Raspberry Pi) Rapid prototyping & fabrication (3D printing, CNC, sheet metal) PCB design & embedded electronics (KiCad, EasyEDA, Altium) I’m passionate about turning ideas into working products that perform reliably in the real world — whether it’s a precision instrument, automation tool, or consumer-ready prototype. I value clear communication, engineering accuracy, and designs that reflect craftsmanship and purpose. If you’re looking for someone who can take your concept from sketch to functional prototype, combining engineering precision with creativity and discipline — I’d love to collaborate.

I am a graduate from the University of Florida class of 2019. I have experience using various electrical engineering programs such as: Autocad, LTSPICE, MATLAB, Altium Designer, and Atmel Studio. I am... Read more

I am a graduate from the University of Florida class of 2019. I have experience using various electrical engineering programs such as: Autocad, LTSPICE, MATLAB, Altium Designer, and Atmel Studio. I am knowledgeable in various fields of electrical engineering such as schematic capture, SPICE analysis, PCB design, and firmware development. I am currently 6+ years into my career, and continue to pursue using my skills to my full potential. I am currently working in the Aviation industry as an electrical engineer and I am taking on the challenge of providing any engineering solutions my clients need. I am currently focused on PCB design projects. While that is not my only area of expertise, like many electrical engineers, I have a broad set of skills that allow me to be adaptive in the solutions my clients need and I am open to work in any field needed. My projects I have worked on range from hangar door control boxes, to firmware development of commercial smart sensor technology, and even to IoT solutions for the electrical utility market. I have more than 2 dozen PCB that have been designed, fabricated, assembled, and gone through the phases of the development cycle. Feel free to pick my brain with any questions of my experience and I hope to be of service to you soon.

With 9+ years of PCB design experience, I specialize in Altium-based layouts, RF circuits, multi-layer boards (up to 8 layers), and FPGA integrations. Whether you need schematics, embedded system desi... Read more

With 9+ years of PCB design experience, I specialize in Altium-based layouts, RF circuits, multi-layer boards (up to 8 layers), and FPGA integrations. Whether you need schematics, embedded system designs, or help turning software concepts into production-ready hardware, I deliver quick-turn, cost-effective solutions. When you just need Another EE to get the job done, I’m here to help.

Hello I'm a mechanical engineer with about 8 years experience working as a design engineer and CAD operator. I have worked for the past 4 years as design consultant and am looking for more clients. I... Read more

Hello I'm a mechanical engineer with about 8 years experience working as a design engineer and CAD operator. I have worked for the past 4 years as design consultant and am looking for more clients. I want to help you materialize your ideas. My services include Product Design Design for Manufacturing Prototyping 3D Modeling Photo-Realistic 3D Product Rendering Product Assembly Guides and Documentation PCB Design

Automation and Embedded Systems Engineer with experience in electronics, firmware development, and PCB design. I work with microcontrollers such as Arduino, ESP32, ESP8266, and Raspberry Pi, developi... Read more

Automation and Embedded Systems Engineer with experience in electronics, firmware development, and PCB design. I work with microcontrollers such as Arduino, ESP32, ESP8266, and Raspberry Pi, developing hardware and software solutions for automation and IoT projects. My experience includes sensor integration, communication protocols, basic industrial automation, and custom PCB development. I design electronic circuits, create schematics and PCB layouts, and develop embedded firmware focused on reliability and performance. I also have experience with system testing, debugging, and prototyping. My main goal is to deliver efficient, reliable, and cost-effective engineering solutions, always focusing on quality and client satisfaction. Skills: • Embedded Systems • Automation Systems • PCB Design • Electronics Engineering • IoT Solutions • Firmware Development • Hardware Integration • Prototyping and Testing

Electrical Engineer with over 20 years experience in most industries (Aerospace, Photonics/optical, Medical, Government, etc). I have successfully developed and deployed prototypes and volume-manufact... Read more

Electrical Engineer with over 20 years experience in most industries (Aerospace, Photonics/optical, Medical, Government, etc). I have successfully developed and deployed prototypes and volume-manufactured products at all levels of complexity. Strong background in FPGA/SoC design, especially for AMD/Xilinx MPSoC, RFSoC, and Versal. Decades of experience with Altium for schematic capture and high-speed/HDI PCB layout, including designs for > 100Gbps per lane PAM-4 digital transceivers as well as RF.

I have experience designing PCBs for high speed digital systems, backplanes and daughterboards, optical systems, wireless/IoT products, power electronics, mmWave systems, and much more. I start with y... Read more

I have experience designing PCBs for high speed digital systems, backplanes and daughterboards, optical systems, wireless/IoT products, power electronics, mmWave systems, and much more. I start with your schematic and BOM or your ECAD files, and I provide you with a finished PCB layout along with all standard manufacturing documentation and assembly drawings. During the PCB design process, I keep an eye towards the scalability of your design, as well as standard DFM rules and implementing requirements from your manufacturer. If you have not consulted with a manufacturer, I can help you find a producer that will meet your needs and help you scale. Our collaborative approach reflects best practices and helps you reach success. 1. Analog Systems and Sensors - Highspeed ADC & DAC Implementations - Direct-RF Sampling Architectures - Up/down Converting Mixers & IF Signal Processing - Analog Signal Processing & General Purpose Op-Amp Circuits - Audio Amplifier Design - Electro-optical Interface Design 2. High Speed Digital and Networking - Microcontroller Hardware Development - Application Class Processor (MPU) Hardware Development - High-Speed Memory Interface Design - DDR3 and LPDDR4 SDRAM Implementations - FPGA Hardware Development - USB 2.0, USB 3.0, & Gigabit Ethernet Hardware, Including Switches/Hubs - PCIe Hardware - Implementation of FPGA & ASIC Based Display Bridges Inline Translation Between MIPI DSI and legacy parallel RBG Video - Wireless Connectivity such as BLE, Wi-Fi, and LoRa 3. Power Electronics - High Performance Switchmode Converter Design - Ultra Low Noise Converter Design for RF Supply Pre-Regulation - Automotive/Aerospace Load Dump Protection - High Bandgap Semiconductor Converters (GaN & SiC) - EMI/EMC Converter Debugging - High Frequency Converters for Micro Form Factors - Battery Systems - Solar Power & MPPT Converters Support EDA Tools Altium Designer, Cadense OrCAD/Allegro PCB Designer, Mentor Graphics PADS/PADS Professional, KiCAD, Eagle CAD, Diptrace, EasyEDA

I’m the founder and lead engineer of Laztronics, an engineering design and prototyping company focused on electronics, embedded systems, RF/wireless, sensors, PCB design, firmware, and test automation... Read more

I’m the founder and lead engineer of Laztronics, an engineering design and prototyping company focused on electronics, embedded systems, RF/wireless, sensors, PCB design, firmware, and test automation. I help founders, small businesses, and technical teams turn early-stage ideas into working hardware — from circuit concepts and embedded prototypes to PCB layouts, test fixtures, automation scripts, and small-batch builds. Before starting Laztronics full time, I worked as a Systems Engineer in satellite communications, where I supported RF/wireless system integration, automated test workflows, hardware/software troubleshooting, and Python-based engineering tools. My background is in physics, signal processing, RF systems, embedded development, and hands-on hardware bring-up. I like projects where the goal is simple: make the thing work, prove it with data, and turn it into something real. I’m currently open to freelance projects, prototype builds, technical consulting, and collaborations involving electronics, sensors, wireless systems, automation, and embedded hardware.

A Senior IoT Engineer with a strong focus on end-to-end embedded systems and hardware design, from concept to production. My core strength is in PCB/EDA design (Altium Designer, EasyEDA), combined wi... Read more

A Senior IoT Engineer with a strong focus on end-to-end embedded systems and hardware design, from concept to production. My core strength is in PCB/EDA design (Altium Designer, EasyEDA), combined with practical experience building real-world IoT devices that have to work reliably outside of lab conditions. I’ve designed systems involving power management, sensor integration, wireless communication (BLE, Wi-Fi, cellular), and low-power optimization. I regularly work on: Custom PCB design (schematic, layout, Gerbers, BOM) Embedded systems using ESP32, STM32, and similar MCUs Power electronics (buck/boost, battery systems, USB-C, thermal considerations) Communication protocols (BLE GATT, I2C, SPI, UART, Modbus) Debugging and improving existing hardware (thermal issues, noise, stability) I’ve also supported projects that required tight constraints—small form factor boards, battery-powered systems, and harsh environment designs—where reliability and efficiency matter more than just “making it work.” Beyond hardware, I understand the full IoT stack and can align firmware, hardware, and system behavior to ensure everything works together cleanly. If you already have a design, I can help refine and fix it. If you’re starting from scratch, I can take it from idea to a production-ready board.