Hire Paper to CAD Conversion Designers in United States

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I have an A.A.S. in Computer-Aided Drafting & Design with over a decade of CAD experience. I'm proficient in creating many different types of CAD drawings and 3D models for various industries such as:... Read more

I have an A.A.S. in Computer-Aided Drafting & Design with over a decade of CAD experience. I'm proficient in creating many different types of CAD drawings and 3D models for various industries such as: fabrication drawings, detail drawings, mechanical and architectural drawings, presentation models, renderings, prototype models and more. I understand that strong communication is a key factor in getting a job completed correctly and on time. Let's talk about it and then get it done!

• Date (8/2014 – Today´s Date) • Factory name Vossen Wheels (Florida) • Sector Light industr... Read more

• Date (8/2014 – Today´s Date) • Factory name Vossen Wheels (Florida) • Sector Light industry (Automotive) • Occupation or position held CNC Mill-Lathe Programmer. CAD DESIGNER • Main activities and responsibilities Create Programs for CNC Machines (Fanuc and HAAS) ------------------------------------------------- • Date (5/2013 – 8/2014) • Factory name PERKO (Florida) • Sector Light industry (Naval and others) • Occupation or position held CNC Mill-Lathe Programmer Setup man. CAD DESIGNER • Main activities and responsibilities CNC Setup FANUC Control ------------------------------------------------- • Date (2/2013 – (5/2013) • Factory name Southern Gear & Machine (Florida) • Sector Light industry (Aviation and others) • Occupation or position held CNC Lathe machines Operator. CAD DESIGNER • Main activities and responsibilities CNC Operator for MAZAK and FANUC Control ------------------------------------------------- • Date (01/2009 – 06/2012) • Factory name Fundilusa LDA (Portugal) • Sector Heavy industry (naval machinery) • Occupation or position held Programmer CNC machines. CAD DESIGNER • Main activities and responsibilities Create CNC Programs for operators FAGOR 8055 and Heindenhain CNC Control ------------------------------------------------- • Date (02/2004 - 12/2008) • Factory name Baliño S.L. (Spain) • Sector Heavy industry (naval machinery) • Occupation or position held Operator-Programmer CNC Lathe machines. CAD DESIGNER • Main activities and responsibilities CNC Operator-Programer FAGOR 8055 and Heindenhain Control

Welcome to VOLA DESIGN & CONSULTING, Wondering how outsourcing some or all of your CAD drawings can improve your response times - you need to talk to VOLA DESIGN & CONSULTING. Our CAD drafting service... Read more

Welcome to VOLA DESIGN & CONSULTING, Wondering how outsourcing some or all of your CAD drawings can improve your response times - you need to talk to VOLA DESIGN & CONSULTING. Our CAD drafting services range from simple "paper to CAD" conversion and revision changes to part design and "Top-down" 3D assembly modeling. O​​ur goal is to provide you with a comprehensive CAD service that meets your company's standards and specifications in the time frame that you require. We are located in Shelby Twp, Michigan and serve companies based locally and nation wide. Reverse engineering of existing parts and generate a 3D models of them. Conceptual 3D design models from your ideas and sketches, we can build a 3D model for you to see. From there we can develop and improve your concept with your input. Photo-realistic rendering of product models for marketing and promotion. We also provide evaluation, design services and assistance to independent inventors in preparing and filing provisional patent applications with USPTO.

MBA-backed Geospatial Solutions Architect and Design Leader with over 10 years driving enterprise GIS strategy and 16 years of military intelligence expertise. Proven track record of translating compl... Read more

MBA-backed Geospatial Solutions Architect and Design Leader with over 10 years driving enterprise GIS strategy and 16 years of military intelligence expertise. Proven track record of translating complex technical ecosystems into measurable business outcomes – from building cloud-native municipal GIS platforms serving five government clients, to architecting intelligence systems deployed across the CENTCOM theater. A results-oriented program leader who functions as a strategist, technologist, and trusted advisor, with deep expertise in stakeholder alignment, enterprise software adoption, and data- driven decision making. − Architected and deployed a system of record adopted across the CENTCOM theater, consolidating multi-source intelligence data to support strategic command decisions. − Designed end-to-end GIS infrastructure for a regional water conservancy district, establishing authoritative data pipelines and operational dashboards from the ground up. − Founded and scaled a UAS program, creating a new revenue stream and cutting topographic data acquisition time through advanced photogrammetry workflows.

I'm a certified Onshape Associate and experienced CAD designer with a strong background in 3D modeling, technical drawing, and design visualization. My work has been recognized at the Michigan Industr... Read more

I'm a certified Onshape Associate and experienced CAD designer with a strong background in 3D modeling, technical drawing, and design visualization. My work has been recognized at the Michigan Industrial and Technology Education Society (MITES) competition, where I earned 1st place for a Lanz Bulldog Tractor model and 4th place for a radial engine design. I specialize in creating detailed animations, renderings, working drawings, geometric constructions, orthographic projections, and section views. I’m also skilled in toolpath generation and simulation using Fusion 360. Proficient in a variety of industry-standard CAD tools, including Autodesk products, Siemens NX, SolidWorks, Fusion 360, and Onshape, I’m ready to help bring your concepts to life with precision and clarity.

My name is Stacy Kirkner. I have over 12 years’ experience in AutoCAD 2d and 3D models. (I actually teach AutoCAD). I am highly educated, just completed another degree B.B.A. with a 4.0 GPA while work... Read more

My name is Stacy Kirkner. I have over 12 years’ experience in AutoCAD 2d and 3D models. (I actually teach AutoCAD). I am highly educated, just completed another degree B.B.A. with a 4.0 GPA while working full time job. Also, have 2 A.A.S. in engineering. I have a photographic memory, so if you tell me something or show me something, I have it! I am passionate about product designs, problem-solving, and creating. I am also artistically-inclined so I make sure product layouts look nice, as-well-as function properly. I am honest, works hard, and mechanically-inclined. I enjoy problem-solving and creating! I could do this type of work all day long and can't get enough of inventing and product designing. I am absolutely thrilled when I can be part of product development that will improve the lives of others! I welcome the opportunity to prove my abilities. I look forward to making your product designs, creations, and dreams come alive. Best Regards, Stacy Kirkner

I have over 10 years experience with AutoCAD and over 4 years with SolidWorks.

I have over 10 years experience with AutoCAD and over 4 years with SolidWorks.

NC Programmer/Tool Designer/Planner/Modeller Do you have a part that you just do not have time to plan, tool and NC program? I can provide a one-stop solution to this need. I am a seasoned 20 ye... Read more

NC Programmer/Tool Designer/Planner/Modeller Do you have a part that you just do not have time to plan, tool and NC program? I can provide a one-stop solution to this need. I am a seasoned 20 year Manufacturing Engineer with extensive experience in planning, cutter design/selection, NC Programming and CAD Modelling. Expert programmer in 3, 4 and 5 axis high speed machining and turning of Aluminum, Magnesium, Titanium, Steel and other materials. Proficent in CATIA V5, V4, Vericut, Excel, Word and other Microsoft Softwares.

Autocad designer since 1988, certified Autocad Professional. Piping designer, commercial kitchen designer, ASME vessels, sub-sea flow Ines, 2D/3D designer.

Autocad designer since 1988, certified Autocad Professional. Piping designer, commercial kitchen designer, ASME vessels, sub-sea flow Ines, 2D/3D designer.

I'm Matt. My goal for this summer is to bike cross country. Are you down?

I'm Matt. My goal for this summer is to bike cross country. Are you down?

Versatile Project Coordinator with a demonstrated history of working in the residential construction industry and business administration. Skilled in AutoCAD, Revit Architecture, Microsoft Office Suit... Read more

Versatile Project Coordinator with a demonstrated history of working in the residential construction industry and business administration. Skilled in AutoCAD, Revit Architecture, Microsoft Office Suite, SketchUp, Adobe Indesign CC, and Adobe Illustrator. Strong business development professional with a Certificate focused in Architectural and Interior Design Graphics from Indiana University–Purdue University Indianapolis and Bachelor's Degree in Building Construction Management from Purdue University.

27 years experience designing and detailing custom machinery and instruments to include product design, product management and engineering management. 16 years experience in a R&D group at Thermo E... Read more

27 years experience designing and detailing custom machinery and instruments to include product design, product management and engineering management. 16 years experience in a R&D group at Thermo Electron Corporation (formally Harshaw Chemical world leader in Personal Dosimetry) working in their TLD group. (Thermoluminescent Dosimetry) Proficient in the use of SolidWorks, AutoCAD, Anvil MD1000, SurfCAM, Microsoft Office products, SolidWorks EPDM Admin. 7 years, hands on, manufacturing engineering experience in a custom metal fabrication shop. Responsible for processing all customers quotes and orders to include detailed bills of materials, detailed shop routings and CNC programming. I have excellent computer skills, a sound understanding of network file management and I'm an engineering documentation specialist. I can work as a liaison between engineering and manufacturing and I work exceptionally well with customers and vendors both local and overseas.

I am an Aerospace Engineer who loves doing 3D cad drafting and design work. I have been doing drafting/design projects for over ten years primarily for commercial and military aircraft.

I am an Aerospace Engineer who loves doing 3D cad drafting and design work. I have been doing drafting/design projects for over ten years primarily for commercial and military aircraft.

A college student which will major in a science field, and apart from that a fabricator. Currently, co founder of Arts at works, a business that sub contracts metal fabrication in Southern Orange Cou... Read more

A college student which will major in a science field, and apart from that a fabricator. Currently, co founder of Arts at works, a business that sub contracts metal fabrication in Southern Orange County. We so far specialize on off road vehicles, with proceedings of becoming Los Angels certified in welding. Personally, was temporarily employed at an laser cutting service center, and with 2 years of Solidwork and Autocad classes, with rapid modeling and prototyping . I have minor experience with die casting and molding due to working with at a dental technician laboratory, as I grew up in my parent's business. Welding, sheet metal, mechanical components, prototyping, molding, casting,laser cutting and plasma cutting are essentially what I can provide.

Hello, I have a deep interest in helping others to create using my skills in Cad design.

Hello, I have a deep interest in helping others to create using my skills in Cad design.

Senior Commercial CAD Designer and Drafter with 30 plus years of experience in building and tenant build out design with ADA and building code knowledge.

Senior Commercial CAD Designer and Drafter with 30 plus years of experience in building and tenant build out design with ADA and building code knowledge.

Thank you for reviewing my profile and my team and I look forward to assisting you. We are a dedicated, 2D drafting team of workaholics who enjoy creating perfected drawings. Our team specializes... Read more

Thank you for reviewing my profile and my team and I look forward to assisting you. We are a dedicated, 2D drafting team of workaholics who enjoy creating perfected drawings. Our team specializes in the design and creation of 2D construction plans (Plan and Profile) including piping design and placement for city permit approval. We are experienced in the design criteria and ROW construction requirements both Aerial and Underground for each city in the Dallas / Fort Worth metroplex as well as TX Department of Transportation (TXDOT). Some of the cities we have completed designs within include: Plano, Farmers Branch, Frisco, Richardson, The Colony, Dallas, Fort Worth, Euless, Arlington, Garland, Allen, and more.

Hello, I'm a CAD designer that has been working in the field for 12 years. I started in the field providing tech support and teaching courses in SolidWorks as a part time employee as I finished my de... Read more

Hello, I'm a CAD designer that has been working in the field for 12 years. I started in the field providing tech support and teaching courses in SolidWorks as a part time employee as I finished my degree at ASU. Then I graduated and began work at a Phoenix-based Aerospace

Hi! My name is Joshua Burmeister and I'm currently an engineering student with a strong background in CAD. I have been using CAD programs like SolidWorks and Fusion 360 since ninth grade and have tau... Read more

Hi! My name is Joshua Burmeister and I'm currently an engineering student with a strong background in CAD. I have been using CAD programs like SolidWorks and Fusion 360 since ninth grade and have taught myself basic cad using youtube and furthered my knowledge through years of schooling. I hope to use any money made using this site to make ends meet and start to chip away at my student debt.