Hire Mechanical Engineer Designers near Pennsylvania, United States

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast... Read more

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast experience with SolidWorks as well as Siemens NX through internship and independent project experience. I also have strong experience in design with Adobe Illustrator. All of the graphics on my personal website were designed with Illustrator, and I am confident that I can provide you with a quality design. Feel free to take a look at some of my design work on my personal website. I am committed to providing you with a highly professional experience and look forward to working with you!

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Devel... Read more

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Development department. I have over 4 years CAD experience in software including SolidWorks, Autodesk Inventor, AutoCAD, Fusion 360, and ANSYS. I have approximately 9 months of full time engineering design experience, but also did design work through all 4 years of college. I also have a background in matlab and python programming.

I graduated from Penn State with a BS in Electro-Mechanical Engineering Technology in 2018. I was hired right out of college and have been working daily with Creo and Inventor for about 3 years profes... Read more

I graduated from Penn State with a BS in Electro-Mechanical Engineering Technology in 2018. I was hired right out of college and have been working daily with Creo and Inventor for about 3 years professionally. I have some AutoCAD experience as well, but do not use daily. About 4 months into my employment I was assigned a 3.5 million dollar project, which I completed on time, under budget and with no issues. I feel confident in my ability to complete any design challenge that comes my way.

Hello, I'm a mechanical engineer with good skills in Autocad, Solidworks. I'm able to create 2D drawings and 3D models from scratch, modifying, and finalizing. I can create new designs or adapt ex... Read more

Hello, I'm a mechanical engineer with good skills in Autocad, Solidworks. I'm able to create 2D drawings and 3D models from scratch, modifying, and finalizing. I can create new designs or adapt existing designs that fits the special use of the part or the device. Regards, Hany Estefanos

Over 10 years of mechanical engineering and program management experience in the design and development of mechanical products in the Oil and Gas, Army Research, and Aerospace industries.

Over 10 years of mechanical engineering and program management experience in the design and development of mechanical products in the Oil and Gas, Army Research, and Aerospace industries.

As an Autodesk Inventor expert and Mechanical Engineer, I know how to optimize designs for the best weight, cost, and performance. I have worked with companies all over the world, from start-ups to m... Read more

As an Autodesk Inventor expert and Mechanical Engineer, I know how to optimize designs for the best weight, cost, and performance. I have worked with companies all over the world, from start-ups to multi-billion dollar corporations. I have multiple certificates in Autodesk Inventor and Vault with a specialization in automation and Product Development. I have over 20 years experience with Autodesk Inventor, over 22 years of programming experience (including 16 years of experience with iLogic and developing Excel VBA spreadsheets for model and drawing automation). Some of my latest projects include: - iLogic script to fully-automate a Product Configurator, capable of handling 49,000,000 unique assemblies and drawings - Tool to automatically publish one or several model(s) and drawing(s) in multiple file file formats - VBA script to directly link the ERP system (SQL database) to the Autodesk Inventor Bill of Material for validation - iLogic script to allow for error-checking, missing information, and update drawing blocks - ... hundreds of other projects that I would be happy to discuss if you have a specific example

I'm a mechanical engineer with experience in mechanical design, reverse engineering, and prototyping. I enjoy turning ideas into reality through design iteration, 3D CAD, and 3D printing. Whether you... Read more

I'm a mechanical engineer with experience in mechanical design, reverse engineering, and prototyping. I enjoy turning ideas into reality through design iteration, 3D CAD, and 3D printing. Whether you have an existing part that needs to be recreated, an idea that needs to be developed, or a design that needs refinement, I can help turn it into a practical CAD model and prototype. I focus on accuracy, functionality, and thoughtful design throughout the development process. I'm always interested in solving new mechanical design challenges and bringing ideas from concept to reality.

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3... Read more

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3.0 and (REX- Reverse Engineering Extension , Autodesk Inventor, Geomagic Design / Design X, AutoCAD (Mechanical), and Autodesk Fusion 360. I'm also highly skilled in the following CAD/CAM Software: MasterCam X7 to X9, Esprit, Bob cad /cam

Process Improvement Engineer | CAD Specialist | Lean Manufacturing Expert I'm a Process Improvement Engineering Manager with a strong background in mechanical engineering technology and over a decade... Read more

Process Improvement Engineer | CAD Specialist | Lean Manufacturing Expert I'm a Process Improvement Engineering Manager with a strong background in mechanical engineering technology and over a decade of hands-on experience driving efficiency in high-mix, low-volume manufacturing environments. I specialize in Lean Six Sigma principles, 3D modeling, fixture design, and production workflow optimization. Core Skills: 2D & 3D CAD Design (SolidWorks, DXF for laser/CNC/plasma) Lean Manufacturing & Six Sigma Implementation Process Mapping & SOP Development VBA Automation in Excel for Scheduling & Reporting Design for Manufacturability (DFM) & Fixture Development Highlights: Led Kaizen events reducing lead times by 30%+ Built automation tools to optimize $1M+ in annual laser cutting jobs Designed custom fixtures that improved weld accuracy and reduced setup time by 40% Managed cross-functional teams to execute plant-wide layout improvements I bring both creative engineering and operational grit to the table. Whether you're looking to improve your shop’s workflow, automate processes, or get high-quality CAD designs ready for production — I’ve got you covered. Let’s make your process better, faster, and smarter.

I’m a degreed mechanical engineer with over 30 years of hands-on experience in manufacturing, mechanical design, and engineering leadership. My career spans industries including automotive, consumer p... Read more

I’m a degreed mechanical engineer with over 30 years of hands-on experience in manufacturing, mechanical design, and engineering leadership. My career spans industries including automotive, consumer products, industrial equipment, and more. This broad background gives me a practical understanding of how to turn ideas into production-ready solutions. I specialize in CAD modeling using SolidWorks and AutoCAD, with deep expertise in design for manufacturability (DFM), tolerance stack-up, BOM creation, and production optimization. Whether you’re prototyping a new product, refining an existing design, or converting legacy CAD files, I bring precision, speed, and real-world insight to every project. My professional history includes roles as a Manufacturing Engineer, Project Engineer, Engineering Manager, Mechanical Designer, and Operations Manager. I’ve led cross-functional teams, improved throughput, reduced tooling costs, and solved complex design challenges under tight deadlines. What I offer: • Production-ready CAD models and assemblies • Legacy CAD file conversion and cleanup • Design optimization for CNC, injection molding, and additive manufacturing • Tolerance analysis and GD&T application • BOM creation and documentation • Remote consulting for manufacturing process improvement I’m available for short-term projects, long-term collaborations, and remote engagements. Let’s make your design not just functional but manufacturable.

Hi, I'm Colin Young, a seasoned draftsman and welder with over 10 years of hands-on experience in fabrication and design. I specialize in creating detailed 2D and 3D CAD models, particularly for API 6... Read more

Hi, I'm Colin Young, a seasoned draftsman and welder with over 10 years of hands-on experience in fabrication and design. I specialize in creating detailed 2D and 3D CAD models, particularly for API 650 storage tanks, steel structures, and custom aluminum projects. My extensive fabrication background gives me a practical understanding of manufacturable designs that meet both client and industry standards. Currently, I work as a Draftsman/Engineer in the above-ground storage tank industry and am pursuing a Bachelor of Science in Mechanical Engineering Technology. My work combines technical expertise with real-world fabrication experience to deliver high-quality results for every project.

Hello! I’m Ahmad, a mechanical engineer with over 10 years of experience in designing complex press die tools for automotive parts production. My expertise spans a wide range of 3D CAD software, inclu... Read more

Hello! I’m Ahmad, a mechanical engineer with over 10 years of experience in designing complex press die tools for automotive parts production. My expertise spans a wide range of 3D CAD software, including Catia, Siemens NX, Creo, Solidworks, and AutoCAD.

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Fin... Read more

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Finding and incorporating other mechanical components from McMaster-Carr depending on project needs - Using 3D printers and slicer software - Using other illustration software such as Procreate for graphic design and infodiagrams

I’m a Mechanical Engineering Graduate from Penn State specializing in 3D CAD modeling and product design. I’ve worked with SolidWorks, Inventor, and Catia V5 on projects involving mechanical assemblie... Read more

I’m a Mechanical Engineering Graduate from Penn State specializing in 3D CAD modeling and product design. I’ve worked with SolidWorks, Inventor, and Catia V5 on projects involving mechanical assemblies and real-world prototyping. I help clients develop precise, manufacturable CAD models and detailed drawings for production or 3D printing.

I'm a mechanical design engineer with 11+ years of experience in product design, foundry tooling and manufacturing support. I help clients turn existing models, sketches, drawings and measured parts i... Read more

I'm a mechanical design engineer with 11+ years of experience in product design, foundry tooling and manufacturing support. I help clients turn existing models, sketches, drawings and measured parts into practical CAD and clear manufacturing documentation. My work includes SolidWorks parts and assemblies, detailed 2D drawings, GD&T, BOMs, model revisions, STEP/STL conversion, reverse engineering, and tooling and fixture design. My background includes piping products, cast components, machining, fabrication and 3D printing. I hold a B.S. in Mechanical Engineering from Penn State. Additional experience includes FARO/PolyWorks scanning, MAGMASOFT casting simulation, SolidWorks configurations and design tables, and CAD automation. Available for remote, part-time projects and ongoing CAD overflow support, typically 5–15 hours per week. I prefer a clear scope, practical solutions and straightforward communication.

I graduated from the University of Maine with a Bachelor's degree in Mechanical Engineering Technology. I have been a mechanical design engineer professionally for the last 7 years working on everyth... Read more

I graduated from the University of Maine with a Bachelor's degree in Mechanical Engineering Technology. I have been a mechanical design engineer professionally for the last 7 years working on everything from 3D printed plastic clips, to custom automation machines and custom machine tooling for assembly presses. I have experience in designing for 3D printing as well as GD&T and design for more traditional manufacturing processes like plastic injection molding and CNC machining.

I am a Mechanical Design Engineer based in the United States, specializing in mechanical engineering, 3D CAD modeling, product development, and engineering design solutions. I have technical expertise... Read more

I am a Mechanical Design Engineer based in the United States, specializing in mechanical engineering, 3D CAD modeling, product development, and engineering design solutions. I have technical expertise in SolidWorks, AutoCAD, CATIA, Creo, and ANSYS, with a strong focus on developing precise mechanical components, complex assemblies, technical drawings, and manufacturing-ready designs. My engineering interests include product development, mechanical systems, component optimization, reverse engineering, and finite element analysis. I approach every project with attention to detail, engineering accuracy, and a commitment to delivering practical solutions. I believe successful engineering requires more than creating a 3D model; it requires understanding functionality, manufacturing requirements, materials, tolerances, and the client's objectives. I enjoy collaborating with businesses, startups, manufacturers, and individual clients to turn engineering concepts into functional products. My goal is to deliver dependable engineering work, maintain clear communication, and build long-term professional relationships. Let's bring your engineering ideas to life.

We're an international drafting firm partnering with over 100 clients to deliver CAD projects across all spaces in the A/E/C/G industries.

We're an international drafting firm partnering with over 100 clients to deliver CAD projects across all spaces in the A/E/C/G industries.

Mechanical Engineering PhD Fellow at Drexel University, working on Plasma Technology with experience in both Pharma and Aerospace sectors. I have half a decade of experience with Solidworks. Additiona... Read more

Mechanical Engineering PhD Fellow at Drexel University, working on Plasma Technology with experience in both Pharma and Aerospace sectors. I have half a decade of experience with Solidworks. Additionally, I have practical manual machining experience that fuels my designs as I believe simplicity is normally the most elegant answer

My name is Michael Gray, and I'm currently a mechanical engineering student at Penn State. I'm affiliated with several modeling programs, including SolidWorks, SolidEdge, AutoCAD, Fusion360, Revit, an... Read more

My name is Michael Gray, and I'm currently a mechanical engineering student at Penn State. I'm affiliated with several modeling programs, including SolidWorks, SolidEdge, AutoCAD, Fusion360, Revit, and Blender. I can make both complex parts for assemblies and models for games, and look for any opportunity to learn. Having a passion for design from a young age, I have involved myself with 3D printing and manufacturing processes. Additionally, I have a personal interest in physical assemblies, woodworking, smithing, video game design, finite element analysis, and fluid dynamics. I have taken leadership in design projects requiring model assemblies and parameter-based design, including RC cars, furniture, wind turbines, and personal organizers. All of these outlets have allowed me to explore niches of these programs, and are valuable to my work. If you choose me as a candidate, I will make sure to work with you in every step of the design process. If my services are not to your liking, I will do everything I can to make it right. Thank you for your consideration, and I look forward to the possibility of working together!

I am a Mechanical Engineer with 6 years of design experience. My most recent projects have been in the field of Entertainment Engineering, designing theme park show action equipment and custom machine... Read more

I am a Mechanical Engineer with 6 years of design experience. My most recent projects have been in the field of Entertainment Engineering, designing theme park show action equipment and custom machines for live concert touring. Some of these concerts include Tame Impala, Justin Bieber, and The Weeknd. As a design engineer I am constantly challenged to deliver simple solutions to complex problems. I enjoy the journey; to see ideas go from concept to reality is a driver for me. When working with me you will see that I value customer relationships, challenging projects, and continued learning. In my free time I enjoy running, snowboarding in the winter season and playing guitar (not very good though!). I live in Lancaster, PA and am able to meet with customers in eastern PA if if it would benefit the project.

Hello! I'm Rainaire Hansford (Dr. Hansford), a certified Mechanical Engineer with over 9 years of experience in CAD design, 3D modeling, and product development. I specialize in: Parametric 3D CAD mod... Read more

Hello! I'm Rainaire Hansford (Dr. Hansford), a certified Mechanical Engineer with over 9 years of experience in CAD design, 3D modeling, and product development. I specialize in: Parametric 3D CAD modeling 2D manufacturing drawings Product renderings for concept validation CAM toolpaths for CNC & laser cutting Mechanical prototyping & fit analysis I'm certified in SolidWorks, with additional expertise in Fusion 360, AutoCAD, and Inventor. I've worked on projects ranging from custom parts to corporate product design — including working with Coca-Cola to improve their packaging components. Whether you're an entrepreneur with a napkin sketch or an engineer needing a detailed model, I bring ideas to life with precision and speed. Let’s collaborate on your next product!

My name is Jesse Zipf and I am the founder and CEO of ForgeWorx Automation LLC. I have been an Automation Engineer in the manufacturing industry for over 15 years. I recently started ForgeWorx to deli... Read more

My name is Jesse Zipf and I am the founder and CEO of ForgeWorx Automation LLC. I have been an Automation Engineer in the manufacturing industry for over 15 years. I recently started ForgeWorx to deliver the same high quality engineering as the large integrators but at a fraction of the cost. I have worked in various sectors including industrial, medical, safety, custom manufacturing. A graduate from Penn State University I began my journey as an electro-mechanical engineer but quickly developed into much more. From initial conceptual design to real world installation. I can do it all. I am open for any and all projects, big or small, single or ongoing. It can be a simple programming task with your current software and setup to a whole new control system design and install. I can provide single part CAD work or design entire systems. I can program your robotics or design a robotics system for you. I can integrate components and systems into your current setup or create something new. If you have any idea for improvement I can make it a reality. I can even just consult and give you suggestions, details, and resources if you want to do the work yourself. I can provide as little or as much engineering support as you need.

Experienced Mechanical Engineer and Certified Solidworks Professional (CSWP) with a strong background in precision mechanical system design, advanced manufacturing, and project management. I have a pr... Read more

Experienced Mechanical Engineer and Certified Solidworks Professional (CSWP) with a strong background in precision mechanical system design, advanced manufacturing, and project management. I have a proven track record of delivering high-performance and cost effective solutions across various industries including industrial fluid handling systems, modular wall systems, and architectural construction products. Fluent in both English and Spanish.

I am a Mechanical Engineer by education and I am fascinated with manufacturing and design. I would love to help you bring your design to life!

I am a Mechanical Engineer by education and I am fascinated with manufacturing and design. I would love to help you bring your design to life!

I am a graduate Mechanical Engineering student at the University of Pittsburgh's Swanson School of Engineering. I am in a dual field of Structural and Robotic Engineering. Right now I am working on a... Read more

I am a graduate Mechanical Engineering student at the University of Pittsburgh's Swanson School of Engineering. I am in a dual field of Structural and Robotic Engineering. Right now I am working on a structural project that will be going on the International Space Station in 2019 and a Solar Panel Project for a small village in Panama. Outside of Engineering I really enjoy making music and helping set up for concerts.

Mechanical Engineering student at Lehigh University with hands-on experience in CAD design, reverse engineering, manufacturing, and propulsion testing. Certified SOLIDWORKS Associate (CSWA) with exper... Read more

Mechanical Engineering student at Lehigh University with hands-on experience in CAD design, reverse engineering, manufacturing, and propulsion testing. Certified SOLIDWORKS Associate (CSWA) with experience creating part models, assemblies, engineering drawings, and 3D-printable components. I have designed, assembled, and tested mechanical systems including liquid rocket propulsion hardware, pressure systems, and structural components. My experience includes SolidWorks modeling, reverse engineering, technical documentation, fabrication, welding, sheet metal work, and prototyping. Prior professional experience includes U.S. Navy logistics operations, hazardous materials management, and transportation planning, providing a strong foundation in project execution, documentation, and problem solving. Services offered: 3D CAD Modeling SolidWorks Parts & Assemblies Engineering Drawings Reverse Engineering 3D Printing Design Manufacturing Documentation Mechanical Design Support Design Reviews and CAD Revisions I am committed to delivering accurate, professional work with clear communication and attention to detail