Hire Mechanical Engineering Designers near Pennsylvania, United States

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast... Read more

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast experience with SolidWorks as well as Siemens NX through internship and independent project experience. I also have strong experience in design with Adobe Illustrator. All of the graphics on my personal website were designed with Illustrator, and I am confident that I can provide you with a quality design. Feel free to take a look at some of my design work on my personal website. I am committed to providing you with a highly professional experience and look forward to working with you!

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Devel... Read more

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Development department. I have over 4 years CAD experience in software including SolidWorks, Autodesk Inventor, AutoCAD, Fusion 360, and ANSYS. I have approximately 9 months of full time engineering design experience, but also did design work through all 4 years of college. I also have a background in matlab and python programming.

I graduated from Penn State with a BS in Electro-Mechanical Engineering Technology in 2018. I was hired right out of college and have been working daily with Creo and Inventor for about 3 years profes... Read more

I graduated from Penn State with a BS in Electro-Mechanical Engineering Technology in 2018. I was hired right out of college and have been working daily with Creo and Inventor for about 3 years professionally. I have some AutoCAD experience as well, but do not use daily. About 4 months into my employment I was assigned a 3.5 million dollar project, which I completed on time, under budget and with no issues. I feel confident in my ability to complete any design challenge that comes my way.

Over 10 years of mechanical engineering and program management experience in the design and development of mechanical products in the Oil and Gas, Army Research, and Aerospace industries.

Over 10 years of mechanical engineering and program management experience in the design and development of mechanical products in the Oil and Gas, Army Research, and Aerospace industries.

As an Autodesk Inventor expert and Mechanical Engineer, I know how to optimize designs for the best weight, cost, and performance. I have worked with companies all over the world, from start-ups to m... Read more

As an Autodesk Inventor expert and Mechanical Engineer, I know how to optimize designs for the best weight, cost, and performance. I have worked with companies all over the world, from start-ups to multi-billion dollar corporations. I have multiple certificates in Autodesk Inventor and Vault with a specialization in automation and Product Development. I have over 20 years experience with Autodesk Inventor, over 22 years of programming experience (including 16 years of experience with iLogic and developing Excel VBA spreadsheets for model and drawing automation). Some of my latest projects include: - iLogic script to fully-automate a Product Configurator, capable of handling 49,000,000 unique assemblies and drawings - Tool to automatically publish one or several model(s) and drawing(s) in multiple file file formats - VBA script to directly link the ERP system (SQL database) to the Autodesk Inventor Bill of Material for validation - iLogic script to allow for error-checking, missing information, and update drawing blocks - ... hundreds of other projects that I would be happy to discuss if you have a specific example

Process Improvement Engineer | CAD Specialist | Lean Manufacturing Expert I'm a Process Improvement Engineering Manager with a strong background in mechanical engineering technology and over a decade... Read more

Process Improvement Engineer | CAD Specialist | Lean Manufacturing Expert I'm a Process Improvement Engineering Manager with a strong background in mechanical engineering technology and over a decade of hands-on experience driving efficiency in high-mix, low-volume manufacturing environments. I specialize in Lean Six Sigma principles, 3D modeling, fixture design, and production workflow optimization. Core Skills: 2D & 3D CAD Design (SolidWorks, DXF for laser/CNC/plasma) Lean Manufacturing & Six Sigma Implementation Process Mapping & SOP Development VBA Automation in Excel for Scheduling & Reporting Design for Manufacturability (DFM) & Fixture Development Highlights: Led Kaizen events reducing lead times by 30%+ Built automation tools to optimize $1M+ in annual laser cutting jobs Designed custom fixtures that improved weld accuracy and reduced setup time by 40% Managed cross-functional teams to execute plant-wide layout improvements I bring both creative engineering and operational grit to the table. Whether you're looking to improve your shop’s workflow, automate processes, or get high-quality CAD designs ready for production — I’ve got you covered. Let’s make your process better, faster, and smarter.

I am a Mechanical Engineer with 6 years of design experience. My most recent projects have been in the field of Entertainment Engineering, designing theme park show action equipment and custom machine... Read more

I am a Mechanical Engineer with 6 years of design experience. My most recent projects have been in the field of Entertainment Engineering, designing theme park show action equipment and custom machines for live concert touring. Some of these concerts include Tame Impala, Justin Bieber, and The Weeknd. As a design engineer I am constantly challenged to deliver simple solutions to complex problems. I enjoy the journey; to see ideas go from concept to reality is a driver for me. When working with me you will see that I value customer relationships, challenging projects, and continued learning. In my free time I enjoy running, snowboarding in the winter season and playing guitar (not very good though!). I live in Lancaster, PA and am able to meet with customers in eastern PA if if it would benefit the project.

I was inclined into drafts and crafts since I was a kid, I graduated as an architect and then I complemented my education in the Mechanical Engineering program at college in the USA. I have more tha... Read more

I was inclined into drafts and crafts since I was a kid, I graduated as an architect and then I complemented my education in the Mechanical Engineering program at college in the USA. I have more that ten years of experience working with CAD, and designing to build artifacts for different multi-million dollar companies in the USA. I continue to develop skills and abilities to stay competitive in today's busy market.

Hi! I am a mechanical engineering student in the final year of my master's degree at the University of Pennsylvania. I have used CAD software (AutoDesk Inventor, SolidWorks, OnShape) for the past 5-6... Read more

Hi! I am a mechanical engineering student in the final year of my master's degree at the University of Pennsylvania. I have used CAD software (AutoDesk Inventor, SolidWorks, OnShape) for the past 5-6 years. Some of my projects include a functioning Sterling engine, fully modeled and manufactured, and a micro turbojet engine, of which I manufactured several components. My strength is in Design for Manufacturing.

Mechanical Engineering student at Lehigh University with hands-on experience in CAD design, reverse engineering, manufacturing, and propulsion testing. Certified SOLIDWORKS Associate (CSWA) with exper... Read more

Mechanical Engineering student at Lehigh University with hands-on experience in CAD design, reverse engineering, manufacturing, and propulsion testing. Certified SOLIDWORKS Associate (CSWA) with experience creating part models, assemblies, engineering drawings, and 3D-printable components. I have designed, assembled, and tested mechanical systems including liquid rocket propulsion hardware, pressure systems, and structural components. My experience includes SolidWorks modeling, reverse engineering, technical documentation, fabrication, welding, sheet metal work, and prototyping. Prior professional experience includes U.S. Navy logistics operations, hazardous materials management, and transportation planning, providing a strong foundation in project execution, documentation, and problem solving. Services offered: 3D CAD Modeling SolidWorks Parts & Assemblies Engineering Drawings Reverse Engineering 3D Printing Design Manufacturing Documentation Mechanical Design Support Design Reviews and CAD Revisions I am committed to delivering accurate, professional work with clear communication and attention to detail

I am a graduate Mechanical Engineering student at the University of Pittsburgh's Swanson School of Engineering. I am in a dual field of Structural and Robotic Engineering. Right now I am working on a... Read more

I am a graduate Mechanical Engineering student at the University of Pittsburgh's Swanson School of Engineering. I am in a dual field of Structural and Robotic Engineering. Right now I am working on a structural project that will be going on the International Space Station in 2019 and a Solar Panel Project for a small village in Panama. Outside of Engineering I really enjoy making music and helping set up for concerts.

Specializing in Creo Parametric with 5 years experience. Working professional in the connector industry. Holding Associates Degree in Mechanical Engineering Technology. I am extremely detail oriented... Read more

Specializing in Creo Parametric with 5 years experience. Working professional in the connector industry. Holding Associates Degree in Mechanical Engineering Technology. I am extremely detail oriented and strive to take initiative and complete design work above and beyond customer requests.

I’m a Mechanical Engineering student with a strong interest in CAD, mechanical design, and engineering. I have experience working with AutoCAD and enjoy creating accurate, detailed drawings and design... Read more

I’m a Mechanical Engineering student with a strong interest in CAD, mechanical design, and engineering. I have experience working with AutoCAD and enjoy creating accurate, detailed drawings and designs. I’m continuously developing my CAD skills through school, personal projects, and hands-on practice. I can help with 2D drafting, technical drawings, basic mechanical designs, drawing revisions, and converting ideas or sketches into clean CAD drawings. I pay close attention to dimensions, measurements, details, and organization to make sure the final design is clear and easy to understand. Along with my CAD experience, my background in leadership and customer service has helped me develop strong communication, problem-solving, and time-management skills. I understand the importance of listening to what a client needs, communicating clearly, and completing work accurately and on time. I’m always looking to improve my skills and take on new CAD and mechanical design projects. Whether you need a simple drawing, revisions to an existing design, or help developing a mechanical concept, I’m ready to work with you.

Mechanical Engineering PhD Fellow at Drexel University, working on Plasma Technology with experience in both Pharma and Aerospace sectors. I have half a decade of experience with Solidworks. Additiona... Read more

Mechanical Engineering PhD Fellow at Drexel University, working on Plasma Technology with experience in both Pharma and Aerospace sectors. I have half a decade of experience with Solidworks. Additionally, I have practical manual machining experience that fuels my designs as I believe simplicity is normally the most elegant answer

Mechanical design engineer available for part-time contract work. Experienced in product design using numerous CAD software tools, especially SolidWorks and Fusion 360.

Mechanical design engineer available for part-time contract work. Experienced in product design using numerous CAD software tools, especially SolidWorks and Fusion 360.

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Fin... Read more

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Finding and incorporating other mechanical components from McMaster-Carr depending on project needs - Using 3D printers and slicer software - Using other illustration software such as Procreate for graphic design and infodiagrams

My name is Michael Gray, and I'm currently a mechanical engineering student at Penn State. I'm affiliated with several modeling programs, including SolidWorks, SolidEdge, AutoCAD, Fusion360, Revit, an... Read more

My name is Michael Gray, and I'm currently a mechanical engineering student at Penn State. I'm affiliated with several modeling programs, including SolidWorks, SolidEdge, AutoCAD, Fusion360, Revit, and Blender. I can make both complex parts for assemblies and models for games, and look for any opportunity to learn. Having a passion for design from a young age, I have involved myself with 3D printing and manufacturing processes. Additionally, I have a personal interest in physical assemblies, woodworking, smithing, video game design, finite element analysis, and fluid dynamics. I have taken leadership in design projects requiring model assemblies and parameter-based design, including RC cars, furniture, wind turbines, and personal organizers. All of these outlets have allowed me to explore niches of these programs, and are valuable to my work. If you choose me as a candidate, I will make sure to work with you in every step of the design process. If my services are not to your liking, I will do everything I can to make it right. Thank you for your consideration, and I look forward to the possibility of working together!

Hi, I'm Colin Young, a seasoned draftsman and welder with over 10 years of hands-on experience in fabrication and design. I specialize in creating detailed 2D and 3D CAD models, particularly for API 6... Read more

Hi, I'm Colin Young, a seasoned draftsman and welder with over 10 years of hands-on experience in fabrication and design. I specialize in creating detailed 2D and 3D CAD models, particularly for API 650 storage tanks, steel structures, and custom aluminum projects. My extensive fabrication background gives me a practical understanding of manufacturable designs that meet both client and industry standards. Currently, I work as a Draftsman/Engineer in the above-ground storage tank industry and am pursuing a Bachelor of Science in Mechanical Engineering Technology. My work combines technical expertise with real-world fabrication experience to deliver high-quality results for every project.

I'm a mechanical design engineer with 11+ years of experience in product design, foundry tooling and manufacturing support. I help clients turn existing models, sketches, drawings and measured parts i... Read more

I'm a mechanical design engineer with 11+ years of experience in product design, foundry tooling and manufacturing support. I help clients turn existing models, sketches, drawings and measured parts into practical CAD and clear manufacturing documentation. My work includes SolidWorks parts and assemblies, detailed 2D drawings, GD&T, BOMs, model revisions, STEP/STL conversion, reverse engineering, and tooling and fixture design. My background includes piping products, cast components, machining, fabrication and 3D printing. I hold a B.S. in Mechanical Engineering from Penn State. Additional experience includes FARO/PolyWorks scanning, MAGMASOFT casting simulation, SolidWorks configurations and design tables, and CAD automation. Available for remote, part-time projects and ongoing CAD overflow support, typically 5–15 hours per week. I prefer a clear scope, practical solutions and straightforward communication.

I graduated from the University of Maine with a Bachelor's degree in Mechanical Engineering Technology. I have been a mechanical design engineer professionally for the last 7 years working on everyth... Read more

I graduated from the University of Maine with a Bachelor's degree in Mechanical Engineering Technology. I have been a mechanical design engineer professionally for the last 7 years working on everything from 3D printed plastic clips, to custom automation machines and custom machine tooling for assembly presses. I have experience in designing for 3D printing as well as GD&T and design for more traditional manufacturing processes like plastic injection molding and CNC machining.

I am a CAD Modeler aiming to support my clients' physical product development efforts in a cost-effective way by making CAD models in Fusion360. I have 15 years of experience in product development... Read more

I am a CAD Modeler aiming to support my clients' physical product development efforts in a cost-effective way by making CAD models in Fusion360. I have 15 years of experience in product development, both in large enterprise at Caterpillar and in my own company, Velocity Robotics, as an entrepreneur. I have been on both sides of the freelance relationship and understand what it takes to maximize the value provided to my clients. If you need somebody to turn your drawing or idea into a 3D model, I can help. If you need help with prototyping and engineering, or just another set of eyes on your design, I can help there too. I have a degree in mechanical engineering and a lot of experience prototyping and testing parts and assemblies. I can even 3D print parts and send them to you, and even test fit assemblies in house. I'm looking forward to the opportunity to meet you and discuss your business needs and how I can help. Sincerely, Brad Kriel

I’m a Mechanical Engineering Graduate from Penn State specializing in 3D CAD modeling and product design. I’ve worked with SolidWorks, Inventor, and Catia V5 on projects involving mechanical assemblie... Read more

I’m a Mechanical Engineering Graduate from Penn State specializing in 3D CAD modeling and product design. I’ve worked with SolidWorks, Inventor, and Catia V5 on projects involving mechanical assemblies and real-world prototyping. I help clients develop precise, manufacturable CAD models and detailed drawings for production or 3D printing.

I’m Haneif Felder, a CAD designer skilled in 2D/3D modeling, technical drawings, and product development using Fusion 360. My strengths are accuracy, problem-solving, and fast turnaround. I’ve design... Read more

I’m Haneif Felder, a CAD designer skilled in 2D/3D modeling, technical drawings, and product development using Fusion 360. My strengths are accuracy, problem-solving, and fast turnaround. I’ve designed custom automotive parts, functional prototypes, and engineering components for fabrication and 3D printing. With hands-on project experience and a growing background in mechanical engineering studies, I bring both creativity and technical focus to every design.

Hello! My name is Ashwin Mathews and I'm an undergraduate Mechanical Engineering Major at the University of Houston. I've worked with 3D Modeling Software over 3 years and would love to help you... Read more

Hello! My name is Ashwin Mathews and I'm an undergraduate Mechanical Engineering Major at the University of Houston. I've worked with 3D Modeling Software over 3 years and would love to help you with your latest project! My background includes modeling for my University's Formula SAE Team, and modifying existing free prosthetic arm models for amputees in need through the eNABLE foundation. I also have experience turning 2D drawings to working 3D CAD Models. Feel free to contact me with any questions or concerns!

My name is Aaron Wilz and I am a mechanical engineer with over 5 years of experience in a fast paced, industry leading high quality design environment where I am actively working on consumer products.... Read more

My name is Aaron Wilz and I am a mechanical engineer with over 5 years of experience in a fast paced, industry leading high quality design environment where I am actively working on consumer products. My background is in mechanical engineering design and analysis of custom plastic injection molded parts, diecasting, and metal stamping/forming. This includes everything from conceptual design and material selection, through design tolerance and stress analysis, to prototype and production level tooling. Prior to becoming an engineer, I worked through college as a TIG welder and offer a hands-on approach to problem solving and prototyping.

Sales/Marketing for a Fully licensed SolidWorks professional, with a bachelor's in mechanical engineering. Finding clients for small-medium sized projects, streamlining communications, ensuring qualit... Read more

Sales/Marketing for a Fully licensed SolidWorks professional, with a bachelor's in mechanical engineering. Finding clients for small-medium sized projects, streamlining communications, ensuring quality.