Hire Fluid Dynamics Designers in United States

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different proje... Read more

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different projects with Robert Bosch GmbH company. I have a broad range of skills in Computer-Aided Design (CAD), Computational Fluid Dynamics (CFD), and Finite Element Analysis (FEA). I am proficient at COMSOL, ANSYS, Abaqus, SolidWorks, CATIA V5, Inventor, AutoCAD MEP, Revit, Pro/E [Creo], Matlab, Simulink, Python, Matlab LiveLink, Mathematica, and Dualfoil. SolidWorks Certifications: -Associate and Professional in Mechanical Design (CSWA and CSWP). Please Visit My Portfolio: https://drive.google.com/file/d/1mIvxhUFDAw-8TxiUwuxsUn_8ZLm3oECV/view?usp=sharing

I am a Senior Mechanical Engineer with 15 years of experience specializing in the design and development of high-precision machines, hybrid manufacturing system integration, and metallurgical engineer... Read more

I am a Senior Mechanical Engineer with 15 years of experience specializing in the design and development of high-precision machines, hybrid manufacturing system integration, and metallurgical engineering. I focus on practical mechanical engineering solutions to enhance machine architecture, improve rigidity, optimize thermal behavior, and reduce vibration across different industrial equipment. I take pride in ensuring a smooth transition from concept to production with powerful tools like SolidWorks and ANSYS. Experienced in the design, validation, and optimization of CNC machining centers and hybrid DED platforms, with proven contributions to DMG MORI’s LASERTEC Hybrid Series and Hurco’s VMX/VCX systems. Demonstrated capability in modal and thermal-structural analysis, chatter-reduction research, and digital-twin calibration for predictive maintenance. Skilled at coordinating global R&D efforts across Japan, Germany, and the U.S., ensuring consistent engineering standards and manufacturability across multi-site development programs. Grounded in Metallurgical Engineering, combining expertise in casting design, heat treatment, and microstructure–performance correlation. Proficient in ProCAST simulation for mold filling, solidification, and residual-stress prediction, applying results to enhance material stability and machining accuracy. Experienced in optimizing alloy selection, thermal-cycle control, and defect prevention for cast and welded components used in precision-machinery assemblies. Thank you for taking the time to consider my profile. With my background in mechanical design, CNC machine optimization, and hybrid manufacturing, I’m excited about the chance to bring my expertise to you. I’m confident I can offer valuable insights and help drive the success of your projects. I’d love the opportunity to discuss how I can contribute and look forward to working together.

Looking for 3D design side work. I specialize in SolidWorks and I am certified in SolidWorks Mechanical Design. Willing to work on hourly rate and working schedule, I’m available all day. I have forma... Read more

Looking for 3D design side work. I specialize in SolidWorks and I am certified in SolidWorks Mechanical Design. Willing to work on hourly rate and working schedule, I’m available all day. I have formal training and on the job training in 3D design and CNC programmingand machining.

Strong in design, Simulate and integration with intuitive problem-solving skills. Proficient in 3D Computer Aided Design (CAD) & Finite Element Analysis (FEA). Intermediate skills in Computational Flu... Read more

Strong in design, Simulate and integration with intuitive problem-solving skills. Proficient in 3D Computer Aided Design (CAD) & Finite Element Analysis (FEA). Intermediate skills in Computational Fluid Dynamics (CFD). Passionate about implementing and launching new projects. Ability to translate business requirements into technical solutions. Looking to start the career as an entry-level Structural engineer with a reputed firm driven by technology

I am a Mechanical Engineer (Ph.D. in Mechanical Engineering, Internationally certified Marine Engineer) with good practical skills in the field of exploitation and service of modern Power Plants and E... Read more

I am a Mechanical Engineer (Ph.D. in Mechanical Engineering, Internationally certified Marine Engineer) with good practical skills in the field of exploitation and service of modern Power Plants and Energy Generation Systems including: Diesel/Petrol/Gas Engines, Steam and Gas Turbines, Boilers, Air Conditioning Systems, Refrigeration Plants and Heat Exchangers, Automation and Control Systems. Also I have an experience in design (AutoCAD, SolidWorks, Inventor), strength evaluation (ANSYS, NASTRAN, FEMAP, HYPERMESH, LS-DYNA) and computational fluid dynamics (ANSYS CFX, FLUENT) of machines and mechanisms which are widely used in modern engineering industry.

I'm variya piyush, an experienced Freelance FEA & CFD Engineer with a passion for solving complex engineering challenges. With a strong background in Finite Element Analysis (FEA), Computational Fluid... Read more

I'm variya piyush, an experienced Freelance FEA & CFD Engineer with a passion for solving complex engineering challenges. With a strong background in Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), 3D CAD Design, and Product Failure Analysis, I specialize in providing high-quality, cost-effective solutions for clients across a wide range of industries. Whether you need detailed simulations, product optimization, or expert analysis, my goal is to help you design better, more reliable products, faster and more efficiently. My expertise in advanced simulation software such as SolidWorks, Creo, CATIA, and ANSYS ensures that you receive the most accurate and actionable insights to guide your product development

Through industry experience, I’ve become a goal-oriented engineer. Contributing to and leading team efforts, understanding problems, prototyping, testing, documenting, and ultimately generating functi... Read more

Through industry experience, I’ve become a goal-oriented engineer. Contributing to and leading team efforts, understanding problems, prototyping, testing, documenting, and ultimately generating functional products for customers. I aspire to be a lifelong learner as an engineer. In addition to my bachelor’s degree, I have technician and machining experience in both marine based university research and nuclear fusion technology research and development. These practical applications of engineering knowledge have allowed me to develop an in depth understanding of the entire engineering lifecycle of a program.

Expertise in design for rapid prototyping technologies: 3D printing, laser cutting, CNC machining. Expertise in designing for manufacturing.

Expertise in design for rapid prototyping technologies: 3D printing, laser cutting, CNC machining. Expertise in designing for manufacturing.

Proactive Mechanical Engineer with Diploma in Project Management under PMI methods with knowledge in AutoCAD, Tekla Structures and Computational Fluid Dynamics (OpenFOAM), former football... Read more

Proactive Mechanical Engineer with Diploma in Project Management under PMI methods with knowledge in AutoCAD, Tekla Structures and Computational Fluid Dynamics (OpenFOAM), former football soccer player in youth categories, member of Formula SAE-LUZ in the Engine section, member of Rotaract Organization and Soñar Despierto foundation.

I am a senior Mechanical Engineering student from the University of Northwestern-StPaul seeking to expand my experience and challenge myself by entering into the realm of freelancing. I am very on for... Read more

I am a senior Mechanical Engineering student from the University of Northwestern-StPaul seeking to expand my experience and challenge myself by entering into the realm of freelancing. I am very on for table working with solid works and MATLAB and would love to partner with you to achieve your goals!

A mechanical engineer with a particular liking for system designs, modelling and analysis. Areas of interest are mechanics, thermodynamics and automotive. Command over AutoCAD, Solidworks, Pro-E f... Read more

A mechanical engineer with a particular liking for system designs, modelling and analysis. Areas of interest are mechanics, thermodynamics and automotive. Command over AutoCAD, Solidworks, Pro-E for modelling. ANSYS, ABAQUS, NASTRAN, PATRAN, ADAMS, SIMSCALE and SIMPACK. In addition, adequate skills in MATLAB, C++, JavaScript and web development. Control, Automation and Interfacing using Arduino and LabView Have worked with companies like SHELL in the past. Projects done include Formula Student, Human Powered Vehicle, Hyperloop, Solar Still etc

I am a Mechanical and Thermal Engineer with experience both in research and industry with specialty in Computer Aided Engineering (CAE) including CAD, CFD, and FEA.

I am a Mechanical and Thermal Engineer with experience both in research and industry with specialty in Computer Aided Engineering (CAE) including CAD, CFD, and FEA.

I have been working in modeling and simulation field for 4+ year. I accomplished a number of projects regarding 2D, 3D CAD modeling along with finite element analysis and Computational fluid dynamics... Read more

I have been working in modeling and simulation field for 4+ year. I accomplished a number of projects regarding 2D, 3D CAD modeling along with finite element analysis and Computational fluid dynamics analysis. I use SOLIDWORKS for 3D modeling. sometimes i alos use PTC depending on the requirements. For CFD and FEA, i use ANSYS, COMSOL and ABAQUS depending on the problem specification.

I’m an experienced mechanical design and process engineer that has worked with a variety of clients in the pharmaceutical, food, and chemical processing industries. I also have extensive experience re... Read more

I’m an experienced mechanical design and process engineer that has worked with a variety of clients in the pharmaceutical, food, and chemical processing industries. I also have extensive experience regarding automation, machine and process equipment design for various OEMs and end users. My other interests include computational fluid dynamics analysis, finite element methods/analysis, and chemical process simulation utilizing industry standard software platforms. I have degrees in Mechanical Design Technology, Industrial Business Management, and a Master of Science in Manufacturing Engineering with a concentration in Mechanical Design.

I graduated from the University of Central Florida in Spring 2024 with a degree in Aerospace Engineering and a minor in Mathematics. My primary interests are in design optimization using computational... Read more

I graduated from the University of Central Florida in Spring 2024 with a degree in Aerospace Engineering and a minor in Mathematics. My primary interests are in design optimization using computational fluid dynamics, finite element analysis, and real-world testing to enhance performance. I consistently aim to exceed expectations and enjoy proactively working within team-based environments. I am eager to pursue opportunities in the mechanical design of aerospace systems and structures.

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling an... Read more

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling and testing of materials and their implementation. Previous designs in the field of aerospace engineering include the design of a high pressure air system required to test a flight vehicle in high altitude conditions. The high pressure air system required pressure vessels to sustain the operation of the test, and were calculated to be too costly, however using recycled vessels were considered. The recycled vessels then needed to be tested before being put into service on the system. This meant cutting several critical failure sections of the pressure vessel and sending it for tensile, compression, modulus lab data. This data would then need to be scrutinized to the calculated data based on pressure vessel code and good design practice, safety factors etc. The delivery system was then modeled in ProE Creo software to be delivered to in-house machinists for material ordering and assembly, but not until modeled in AnSYS modeling comparison. This system was successfully commissioned by a engineering team effort with my design engineering assistance. Creating databases to clearly log product data, quality reports, team performance, and work load is also one of my skills using Microsoft Office Access. The custom code i wrote in VBA to easily track and print weekly data that would be discussed at design meetings in an effort to improve overall team efficiency. Using ProE to design flight vehicles for test models was also a key piece of experience to tune my design experience in fluid dynamics. As the design went from pencil and paper theoretical calculations, they were transformed into models, later tested by my team and then a full size model delivered to the customer, NASA, for field testing. Many points of aeronautical engineering experience resides in the modeling done in ProE Creo/Wildfire to develop testing models. My mechanical engineering design experience comes from a firm mostly pitched towards the development of public & private schools. We design the mechanical, HVAC, electrical, plumbing and fire protection, and civil systems. All of the engineering is done "in the same house" as the architectural design. My experience circumvents all of the engineering trades in accordance with NYS education code, the supplements, and the current IMC. Designing systems in my current atmosphere allow for the full design to be implemented without value engineering the design like an EPC. Though EPC's are also part of the job. Mechanically, I have designed HW/Steam boiler rooms, AHU systems, VRF, and the like. My fire protection experience stemmed from my family business, meaning i physically installed many types of plumbing systems and fire protection systems; it is a critical component to influence my design practice in HASS and/or AutoCAD. Many engineers call it "the third eye." My plumbing design experience resides in all types of waste and domestic systems for commercial kitchens, assisted living facilities, schools, large residences and small, also churches. As much as possible, I use my local contacts in the gas, electrical and water utilities to make my designs as solid as possible. All of my MEP & FPE design are based on maintaining code requirements while not having the customer pay for unnecessary equipment etc.

I have 15 years of design experience. In the first 2 years between 2003-2005 after graduation, I have drawn all technical drawings with Autocad that we manufactured. I've designed all site products an... Read more

I have 15 years of design experience. In the first 2 years between 2003-2005 after graduation, I have drawn all technical drawings with Autocad that we manufactured. I've designed all site products and organized assembling them. After 2005, I've learned Solidworks and all my designs were 3d after that year. We are manufacturing welded parts and all projects given by the customer in 2d were converted to 3D by myself. After 2009, I also learned ANSYS Structural and after that, I also gave engineering services to customers for the optimization of designs. Lastly, after 2010, I also studied ANSYS Fluent and CFX for fluid dynamics, especially centrifugal fans. For manufacturing, in 2012 I also had a diploma in Welding Engineering and this year I got NDT Magnetic particle and visual test certificate level 2.

Hello, I have my bachelors degree in mechanical engineering and a minor in economics. I have previous experience working on projects in the automotive industry with specific skill sets revolving manuf... Read more

Hello, I have my bachelors degree in mechanical engineering and a minor in economics. I have previous experience working on projects in the automotive industry with specific skill sets revolving manufacturing, CNC 3d printing, 3D modeling and design, fluid dynamics, strength and materials, etc.

My name is Michael Gray, and I'm currently a mechanical engineering student at Penn State. I'm affiliated with several modeling programs, including SolidWorks, SolidEdge, AutoCAD, Fusion360, Revit, an... Read more

My name is Michael Gray, and I'm currently a mechanical engineering student at Penn State. I'm affiliated with several modeling programs, including SolidWorks, SolidEdge, AutoCAD, Fusion360, Revit, and Blender. I can make both complex parts for assemblies and models for games, and look for any opportunity to learn. Having a passion for design from a young age, I have involved myself with 3D printing and manufacturing processes. Additionally, I have a personal interest in physical assemblies, woodworking, smithing, video game design, finite element analysis, and fluid dynamics. I have taken leadership in design projects requiring model assemblies and parameter-based design, including RC cars, furniture, wind turbines, and personal organizers. All of these outlets have allowed me to explore niches of these programs, and are valuable to my work. If you choose me as a candidate, I will make sure to work with you in every step of the design process. If my services are not to your liking, I will do everything I can to make it right. Thank you for your consideration, and I look forward to the possibility of working together!

I am a mechanical engineer (EIT) and have designed everything from microscale fluids systems, to piping layouts on launch sites, to product prototypes for startups (including my own). I use Geomagic D... Read more

I am a mechanical engineer (EIT) and have designed everything from microscale fluids systems, to piping layouts on launch sites, to product prototypes for startups (including my own). I use Geomagic Design CAD software which allows me to export to AutoCAD/SolidWorks, create detailed 2D drawings, or create polished renderings in 3D. I can turn ideas into reality starting with only a discussion or napkin sketch. I can also make detailed process schematics or layouts using Visio 2013.

I am formally educated in many fields of design drafting including mechanical, piping, architectural, electrical, and industrial design. I am also educated in descriptive geometry, fluid dynamics, pow... Read more

I am formally educated in many fields of design drafting including mechanical, piping, architectural, electrical, and industrial design. I am also educated in descriptive geometry, fluid dynamics, power distribution, electronics, machine tools, product development and workflow, materials sciences, safety, supervision, engineering codes, and more. I have eight years of professional experience as a piping/mechanical designer with a focus in 3D design. I have over 15 years of experience with AutoCAD software and have professionally designed complex high pressure tubing systems, offshore and onshore piping systems, unique mechanical/structural supports, electrical pipe heat tracing circuits, commercial and residential buildings, valves, eyewash stations, tanks, vessels, and heat exchangers. I enjoy learning new software and pursuing other fields of design including audio, security, outdoors/survival, pet/animal, farming, tools, and hobbies. In my spare time I design and prototype analog electrical circuits such as portable power applications, musical sound effects, amplifiers, preamplifiers, speaker cabinets, and portable music applications.

I have over 10 years experience designing industrial and consumer new products. I have managed projects as the lead engineer, developing prototypes and testing, designing components, sub-assemblies, a... Read more

I have over 10 years experience designing industrial and consumer new products. I have managed projects as the lead engineer, developing prototypes and testing, designing components, sub-assemblies, and final assemblies for manufacturability. My expertise is looking at complex interactions and finding solutions given real-world constraints and manufacturing processes. I can help design prototypes based on specific needs as well as design final products that consider real world loads, durability, reliability and fatigue. I've managed engineering teams with as many as 11 global engineers to successful product launch.