Hire CAD designers & engineers in Redwood City, California

Independent drafter based in Chihuahua, Mexico, specializing in custom residential projects in USA. I have over three years of experience producing detailed architectural drawings, executive projects,... Read more

Independent drafter based in Chihuahua, Mexico, specializing in custom residential projects in USA. I have over three years of experience producing detailed architectural drawings, executive projects, and schedules, as well as high-quality renderings.

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience wo... Read more

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience working with Solidworks to produce 3D models and technical documentation for components and assemblies. I recently developed prototype robot grippers for various robotics and factory automation systems with Numatic Engineering. These projects required careful measurement and analysis which led to 3D modeling that was often used to produce drawings for manufacturing or support. In many cases I used 3D printing to create fast, economical, functional prototype components for use in live automation demonstrations. Due to my interest and success in producing 3D modeling and mechanical documentation using Solidworks, I have decided to freelance my skills to further increase my experience and capabilities. I offer the following services using Solidworks: -3D modeling of components and assemblies -Mechanical Drafting of components and assemblies using rectangular tolerance (GD&T offered for certain projects) -FEA Reporting available for components (displacements, 1st principle stresses, VM stresses) -Frequency Analysis Reports available for components

Hello there! My name is Dylan Reed. My design journey began over two decades ago creating logos and editing photos for my parents toy store. This experience led me to hone my design skills studying ar... Read more

Hello there! My name is Dylan Reed. My design journey began over two decades ago creating logos and editing photos for my parents toy store. This experience led me to hone my design skills studying architecture at the University of Notre Dame, which eventually led me to work in the film industry as a set designer and model maker. My main areas of expertise are in 3D modeling, sculpting, and rendering as well as architectural drafting, design, and construction documentation.

I am a CAD Jewelry Designer | 3D Sculpture Artist with 15 years of experience. To evaluate the quality of my work, please see my web site. 3dwaxcarving.com I have had extensive training in both... Read more

I am a CAD Jewelry Designer | 3D Sculpture Artist with 15 years of experience. To evaluate the quality of my work, please see my web site. 3dwaxcarving.com I have had extensive training in both traditional and digital sculpting. I began my studies as a classical sculptor finishing the Sculpture Art School. After art school, I majored in Industrial Design. Finally, I studied 3D digital modeling at the Art Institute of California in San Diego,CA. During my career, I worked in top Hollywood and video game companies as a lead 3d character modeler. I contributed to major projects such as Dune, Law & Order, Dan Dare, Ever Quest, Deep Space PS3 and others . I studied jewelry design under the tutelage of a San Diego based leading jewelry crafter and manufacturer. My passion is for organic modeling. I always strive to create 3D models that are as lifelike as possible. I work to embody each model with spirit and emotion so that my models have character. I use an eclectic tool-set of modern modeling software to achieve this goal. Currently I am working as an independent 3D Sculpture Artist working with jewelry, gift, video game and other manufactures. For the jewelry industry I create sophisticated organic forms with Faberge quality. For toy and gift manufacturers I create 3d relief sculpture, sculpture miniatures, figurines, belt buckles, Christmas ornaments, and many other products. For video game companies I am modeling and texturing high and low polygon stylized and realistic characters.

I have been involved in the film and television industry of Southern California for over 20 years. I worked for a 3D modeling and animation software company based in San Diego, CA called Pixels Inc.,... Read more

I have been involved in the film and television industry of Southern California for over 20 years. I worked for a 3D modeling and animation software company based in San Diego, CA called Pixels Inc., maker of the Mac OS Pixels 3D suite of modeling, animation and rendering tools. Pixels also created the Tempest Renderer which used Total impact G4 multi-chip cards (up to 52 processors in a box about the size of a PC tower). While at Pixels, I worked with companies like Digital Domain, Industrial Light and Magic, and Apple Inc. (The software was a Mac only suite). I was also responsible for building software plugin installers and helping national and international customers with sales, installations, and general trouble shooting of both technical and creative natures. During that time, I also attended and graduated from the Art Institute of California with an Associate of Science in 3D, holding the distinction of receiving the "Best Portfolio" award for the class of 2001. Over the years, I have provided videography, editing, motion graphics, animation, 3D Product design, and design for 3D printing as a contract artist for many L.A. and Denver based post production facilities and other companies needing my skills.

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: En... Read more

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: Engineering Materials, Statistics & Probability, Manufacturing Operations, Dimensional Analysis, Modelling, 3D CAD, Test Analysis, Communication, Prototype Development, Design Improvements and Optimization, Machining and Fabrication Process, Project Management, Materials Research, Troubleshooting, Fabrication, Modeling Contact Daniel regarding design and manufacturing engineering opportunities.

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial C... Read more

I am an experienced mechanical and aerospace engineer with a proven track record of designing components currently flying on rockets. I hold a master’s degree in Mechanical Engineering from Imperial College London, a globally top-10 university. My capabilities include but are not limited to: - Product Design (hand sketches/design conceptualization) - Consulting and Recommendations for Design for Manufacturability, Material Selection, and Manufacturing Methods - Design for Manufacturing – Injection Molding, CNC Machining, Forming, Casting, etc. Mold Design - 3D Modeling - Sheet Metal (3D Model and DXF Files with bends and cut lines) - 3D Simulation and Analysis (stress/strain/fluid flow/volumetric analysis/fatigue analysis/center of gravity/etc.) - Dynamic Motion Simulation - 3D Renderings (Photo Realistic) - 2D Engineering Drawings (ASME Y14.5 Standard) - Assembly Drawings with BOM (Bill of Materials) - Design Specification Drawings - Tech Packs I have launched a freelance mechanical design engineering practice, StellarForged, working with a diverse range of clients—from small startups to established companies. Whether you're tackling a fundamental engineering challenge or navigating a complex problem, I provide the expertise and support needed to drive your success. https://stellarforged.com/

I am a dedicated Mechanical Engineer with a strong background in design engineering. With hands-on experience in SolidWorks, I specialize in creating precise and efficient 3D models. Throughout my car... Read more

I am a dedicated Mechanical Engineer with a strong background in design engineering. With hands-on experience in SolidWorks, I specialize in creating precise and efficient 3D models. Throughout my career, I have worked on a variety of projects, including my Final Year Project where I successfully designed and implemented a solar-powered thermoelectric refrigeration system. In addition to my academic achievements, I have honed my skills by working on various CAD design projects. My expertise lies in producing accurate, detailed models while adhering to engineering standards and ensuring functionality in real-world applications. I am passionate about innovative design and take pride in my ability to transform ideas into practical solutions.

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, o... Read more

Possess skills in CAD, estimating and project coordination of marine systems, new products, and commercial, chemical, pharmaceutical construction projects. Evaluated as being analytical, dependable, organized, intelligent, motivated, and communicative.

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resource... Read more

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resources, providing an exemplary level of client service through a streamlined, creative, and efficient approach to every project. Hands-on and detail oriented, comfortable working with surveyors, engineers, scientists and on unique teams finding cost effective methods for getting projects off the ground and through the pipeline. Along with the metal industry i have extensive knowledge with wood working applications, along with pump systems, piping, and ducting for new building constructions.

I am a 15 year mechanical engineer veteran with extensive experience in fitness equipment, recreational goods, and consumer goods. Products I have designed contain plastic injection molded parts, ste... Read more

I am a 15 year mechanical engineer veteran with extensive experience in fitness equipment, recreational goods, and consumer goods. Products I have designed contain plastic injection molded parts, steel and aluminum weldments, steel and aluminum forgings, aluminum and magnesium die castings, aluminum forgings, sheet stamping and forming, and powdered metal. I also have extensive experience in industrial design.

Highly creative and experienced 3D modeler and illustrator seeking a challenging role where my skills in 3D modeling, design, and collaboration can contribute to innovative and impactful product devel... Read more

Highly creative and experienced 3D modeler and illustrator seeking a challenging role where my skills in 3D modeling, design, and collaboration can contribute to innovative and impactful product development across various industries.

I am a highly experienced Product Designer with over 14 years of expertise, specifically focused on creating USPTO-compliant design patent drawings. I specialize in converting confidential reference m... Read more

I am a highly experienced Product Designer with over 14 years of expertise, specifically focused on creating USPTO-compliant design patent drawings. I specialize in converting confidential reference materials into official black-and-white line drawings with the high precision required for successful patent applications.   My Core Strengths: Expert Compliance: Extensive experience in meeting strict USPTO standards using Adobe Illustrator.   Precision Engineering: Background in production-ready 3D modeling (Autodesk Alias) ensures every drawing is technically accurate.   Proven Track Record: Successfully developed numerous registered patent drawings (e.g., US D1,087,866 S).   I am committed to providing high-quality technical illustrations that support your intellectual property goals efficiently.

Experienced in 3D CAD modeling in Fusion 360, Solidworks, Inventor, and OpenSCAD Contact for CAD and design services in Fusion 360 or Inventor

Experienced in 3D CAD modeling in Fusion 360, Solidworks, Inventor, and OpenSCAD Contact for CAD and design services in Fusion 360 or Inventor

Mechanical Design Engineer & Drafter providing CAD consulting as POHL3D. Message me if you'd like to connect or are in need of some CAD help. Thanks & Take Care!

Mechanical Design Engineer & Drafter providing CAD consulting as POHL3D. Message me if you'd like to connect or are in need of some CAD help. Thanks & Take Care!

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

Michael is a Registered Landscape Architect with over 20 years of experience in a diverse cross-section of landscape architectural projects as well as client specific custom design and constructio... Read more

Michael is a Registered Landscape Architect with over 20 years of experience in a diverse cross-section of landscape architectural projects as well as client specific custom design and construction drawing preparation.

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collabo... Read more

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collaborating, developing and improving mechanical systems. I work in a variety of fields to analyze and evaluate large-scale, highly complex systems. I have repeated success in developing innovative designs with the intent to manufacture, while reducing costs. I will collaborate with you to improve and maintain your current systems, or to create new and innovative projects. I ensure that my designs are not only creative and unique, but also practical, usable and economically viable. In addition, I have a proven ability to manage multiple projects and meet critical deadlines efficiently. Degree: B.S in Mechanical Engineering from Santa Clara University Areas of Expertise: Software • Certified Solidworks Professional (CSWP) • Certified Solidworks Advanced Drawing Tools (CSWPA-DT) • Certified Solidworks Advanced Surfacing (CSWPA-SU) • Certified Solidworks Associate (CSWA) • Solidworks Simulation • Keyshot • Modflow Advisor • Adobe Photoshop and Premier Key Skills • Solid & Parametric Modeling • Geometric Dimensioning & Tolerancing (GD&T) • FEA Simulation • Stress and Strain Analysis • Mechanical Component Design • Design For Manufacturing (DFM) • Machining • Project Management and Quality Control • Test Plan Execution • Troubleshooting and Diagnostics • Superior Mathematics Aptitude • Electro-Mechanical Design

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can u... Read more

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can understand and contractors can utilize to build your project.

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product... Read more

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product engineering, from feasibility analysis and cost estimation to prototyping and production. Notable achievements include designing a self-balancing three-wheel vehicle, engineering the Will.I.AMG for the 2022 Miami F1, and developing the Nikola One hydrogen-electric Class-8 truck. Markus has a proven ability to lead projects from concept to completion, leveraging skills in CAD design, kinematic layout, and advanced manufacturing techniques. He has successfully collaborated with global stakeholders and managed teams across diverse projects, including the development of the Fisker Karma Sunset retractable hard top, Aptera’s mass-production-ready body redesign, and the high-performance LaMarc hypercar. Fluent in German, Markus also brings extensive experience working with renowned brands like BMW, Audi, and Fisker Automotive. He holds a Mechanical Engineering degree and excels in program management, problem-solving, and efficient manufacturing practices. Whether leading large teams or contributing as a hands-on innovator, Markus consistently delivers cutting-edge engineering solutions that align with business goals and customer expectations.

IQ creates content that graphically supports clientele in developing advertisements, promotional media, product catalogs, new product launches, e-commerce content, websites, product videos, and more.... Read more

IQ creates content that graphically supports clientele in developing advertisements, promotional media, product catalogs, new product launches, e-commerce content, websites, product videos, and more. The content created by IQ includes photo realistic images, animations, and motion graphics.

Gud Mould Industry Co., Ltd. is a professional manufacturer of plastic injection molding and die casting mould. Founded in 2007, Gud Mould Industry Co., Ltd. covers an area of 2500 square meters and h... Read more

Gud Mould Industry Co., Ltd. is a professional manufacturer of plastic injection molding and die casting mould. Founded in 2007, Gud Mould Industry Co., Ltd. covers an area of 2500 square meters and has more than 100 experienced staffs, of which more than 30 with 20 years of experience in plastic engineering and die-casting. To meet customers' higher requirements for product quality and greater demand for mould manufacturing, we constantly introduce advanced equipment, technology and talents at home and abroad to enhance our production means and technical support, constantly expand processing area to increase our production capacity. At present, Gud Mould has a large number of international advanced CNC machining centers, EDM, WEDM, milling machines, tool grinders and other precision die and mould processing equipment; imported spectrometers, metallographic analyzers, water capacity detectors, coordinate detectors, gauges and other international advanced detection equipment and instruments. Gud Mould's die design and production all realize computerization, apply International advanced AutoCAD, Pro/E, UG, Cimatron, MASTERCAM, etc. File of IGS, DXF, STP, PORASLD and so on are acceptable here. After receiving drawings and data from customers, engineers of Gud Mould design and program first. Manufacture, produce and inspect them strictly according to drawings of mould engineering. All manufacturing processes realize digitalization of drawings, so as to ensure stability of high precision and high quality of dies. All materials of die are made of high quality steel and precision standard die base, which ensures service performance and life of die. In line with principle of customer first, we provide the best quality, delivery date, quality service and reasonable price, absolutely guarantee interests of customers, and provide confidentiality commitment to all technical information of customers. Gud Mould Industry Co., Ltd. has always adhered to business philosophy of "people-oriented, quality first", and has been making progress and developing steadily. Although Gud Mould is medium-sized, it has been recognized by well-known domestic enterprises such as Chang'an, Changfei, Hafei, Lifan, Ford in China, and has established a good reputation among domestic customers. In 2018, we set up overseas department, which mainly develops overseas markets. We sincerely welcome you to visit our company and expand your business!

I'm the co-founder and a director at Cad Crowd. Send a message with feedback or suggestions to improve the Cad Crowd community 🚀

I'm the co-founder and a director at Cad Crowd. Send a message with feedback or suggestions to improve the Cad Crowd community 🚀

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of... Read more

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of engineering expertise to deliver premium consulting services, encompassing everything from design to creation of concept-to-manufacture schematic drawings, FEA analysis, and comprehensive Design for Manufacturability (DFM) insights. My proficiency extends to various SolidWorks certifications. With a proven ability to excel across a wide spectrum of industries, I invite potential clients to peruse my portfolio. I look forward to connecting with you and/or your company to understand your specific goals and collaborate on tailored solutions that will drive your success to new heights.

A meticulous and performance-driven professional with over eight years of experience in architectural design and technical documentation. Proven expertise in creating precise fabrication, permit, and... Read more

A meticulous and performance-driven professional with over eight years of experience in architectural design and technical documentation. Proven expertise in creating precise fabrication, permit, and erection drawings using advanced 3D modeling tools (Revit, Rhino, Dynamo), with a strong focus on adhering to design specifications and manufacturing constraints. Skilled in managing tight schedules, solving field problems efficiently, and collaborating within interdisciplinary teams to ensure on-time project completion.

Hello, this is ERosner and I'm a freelance Art Director, Illustrator and 2d/3d Motion Graphic Designer in Los Angeles. I have created design and motion for: Viacom MTV, Rick and Morty, the City of We... Read more

Hello, this is ERosner and I'm a freelance Art Director, Illustrator and 2d/3d Motion Graphic Designer in Los Angeles. I have created design and motion for: Viacom MTV, Rick and Morty, the City of Westwood, the City of Venice, CB2, The Moma Design store, Nickelodeon, ▒▒▒▒▒▒▒▒▒▒ TVLand, BoConcept and others. Social media, motion design, merchandise, invites, posters and more. Fun art for merchandising. Let’s chat about working together on some fabulous new projects. Eric www.erosner.com 917-405-8961 Demo reel https://youtu.be/FKp_mxnikNs Fabulous book covers https://www.erosner.com/new-gallery-1 Wow, more fabulous sample projects https://99designs.com/profiles/erosner

I’m a Solidworks Designer with 14 years of working experience in product and mechanical design. Proficient at creating detailed technical drawings, advanced surfacing, solid part modeling and complex... Read more

I’m a Solidworks Designer with 14 years of working experience in product and mechanical design. Proficient at creating detailed technical drawings, advanced surfacing, solid part modeling and complex assemblies for product manufacturing and machine builds. Adept in maximizing form, fit and function through meticulous design model evaluation. Process Plant Designer As the Solidworks PDM Administrator and Drafter my responsibilities include maintaining PDM vault and revision control, managing mechanical BOM's, provide accurate and detailed manufacturing drawings, design process equipment layout using AutoCAD and Solidworks, Prepare Assembly Retrofit Document Guides and Build Packages and (P&ID) Process & Instrumentation Diagrams using AutoCAD • Design detailed assemblies and subassemblies of Process Piping Systems using Solidworks • Design Process Equipment Layout using AutoCAD and Solidworks • Create custom parts and pressure vessel manufacturing drawings. • Prepare Assembly, Retrofit Document Guides and Build Packages. • (P&ID) Process & Instrumentation Diagrams using AutoCAD • Solidworks PDM Vault and Bill of Material management Lead Jewelry Designer Oversee a design team of three. I was the go-to expert for evaluating product designs, parts, assemblies, drawings, dimensioning and tolerancing. I would set the creative direction for product lines and insure manufacturability. R&D of micro precision watch mechanisms and components. Design intricate high-end custom jewelry, bridal and watch lines. • Design machines, fixtures, tooling and molds for jewelry and watch production. • Reverse engineering of Swiss made micro precision mechanical watch movements Detail design of all internal and external wrist watch parts and components. • Implement equation driven design tables to existing and new Solidworks files for an efficient and automated design process.