am a draftsman, I can do 2D drawings and 3D model. I have been use AutoCAD, AutoCAD Plant 3D , Inventor and Solidwork for 15 years as professionel. I worked in the project department of a steel... Read more

am a draftsman, I can do 2D drawings and 3D model. I have been use AutoCAD, AutoCAD Plant 3D , Inventor and Solidwork for 15 years as professionel. I worked in the project department of a steel making pland for 12 years and I worked in an engineering firm that projects industrial facilities for 3 years. I can draw part model, machine model and i can draw technical detail, as well i know P&ID, piping,General lay-out

I have been working with CAD/CAE programs for 5 years and I am expert in Autocad Plant 3D and Solidworks Read more

I have been working with CAD/CAE programs for 5 years and I am expert in Autocad Plant 3D and Solidworks

WHO I AM? I was born in Istanbul/Beyoglu on 12.03.1988. My education life has been in Istanbul and is continuing. I started my undergraduate education in Marmara Uni. in 2005. The same year my... Read more

WHO I AM? I was born in Istanbul/Beyoglu on 12.03.1988. My education life has been in Istanbul and is continuing. I started my undergraduate education in Marmara Uni. in 2005. The same year my work life started part time in ARC Design a firm that does product design. The past 9 years i have been working as a designer in different countries and firms. Some of these are Defne Engineering (Istanbul), Turklift (Ankara), Mega Teknik (Ankara), HS Engineering (Mongolia- Russia). Meanwhile I have been working on freelance design too. Till this day I have done the product design and the conceptual design of over 500 products that have been manufactured. Some of these are considerably valuable while the others are small products. In the last years i have been working as a freelance designer in the field of automotive accessory design.

solidworks,catia,nxsiemens,autocad programlarından sertifikam mevcut. Dışarıdan gelen tekliflere açığım benimle mail üzerinden irtibata ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Read more

solidworks,catia,nxsiemens,autocad programlarından sertifikam mevcut. Dışarıdan gelen tekliflere açığım benimle mail üzerinden irtibata ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

alpcandesign.com I am excited to offer my experience as a design engineer to my clients all over the world. I have extensive experience with product design, surface modelling, mechanical design,... Read more

alpcandesign.com I am excited to offer my experience as a design engineer to my clients all over the world. I have extensive experience with product design, surface modelling, mechanical design, reverse engineering, metrology and more. Industries ranging from automotive and aviation to home appliances and consumer products have benefitted from my product design and fabrications. I will bring my high level of professionalism and practical knowledge to create high quality products for my clients. I earned my Bachelor’s Degree in Mechanical Engineering in 2013. Since then, I have worked as a design engineer and am currently offering my skills to organizations working mostly on CAD Engineering. I am quick learner, creative and practical engineer. I want to combine my ability in engineering and design with my creativity to provide the high quality service.

-SOLIDWORKS -CAD DESIGN -RENDERING -PAPER TO 3D AND TECHNICAL DRAWING -CREATIVE SOLUTIONS FOR YOUR PRODUCT Read more

-SOLIDWORKS -CAD DESIGN -RENDERING -PAPER TO 3D AND TECHNICAL DRAWING -CREATIVE SOLUTIONS FOR YOUR PRODUCT

I have 20 years of experience in Mechanical Engineering and have worked mostly in R&D and Manufacturing departments. I worked in many areas such as product design, glass mold, plastic mold, vehicle... Read more

I have 20 years of experience in Mechanical Engineering and have worked mostly in R&D and Manufacturing departments. I worked in many areas such as product design, glass mold, plastic mold, vehicle parts, and medical devices. I hope to work together with you. I have shared some of my portfolios that you can see on my profile.

Product Development Engineer In the pursuit of a workable and economical design I had the onus of: creating structures, weldments, sheet/plate metal parts, & driven mechanisms; selecting motors... Read more

Product Development Engineer In the pursuit of a workable and economical design I had the onus of: creating structures, weldments, sheet/plate metal parts, & driven mechanisms; selecting motors (AC & Servo), gearboxes, & sensors; researching new materials & technologies; drafting drawings for the machining, fabrication, & processing of parts alongside the assembly of components. To prove the validity and soundness of my designs and those of my teammates I made use of FEA programs (Solidworks Simulation), mechanism simulators (SAM), and pen and paper analysis of structures and assemblies.

ı completed education mechanical engineering Marmara University in istanbul I am doing machine designs in a private company ı designing 3d cad in solidworks and ı animating to the this... Read more

ı completed education mechanical engineering Marmara University in istanbul I am doing machine designs in a private company ı designing 3d cad in solidworks and ı animating to the this desings I can also get high quality renderings for my designs.

I am a mechanical engineer. I am really enjoying and good at cad software like solidworks,catia,fusion 360. Also, i can prepare FEM and flow simulations with ansys, solidworks flow simulation,... Read more

I am a mechanical engineer. I am really enjoying and good at cad software like solidworks,catia,fusion 360. Also, i can prepare FEM and flow simulations with ansys, solidworks flow simulation, hypermesh.

I am specialist engineer with Makhina Robotics Company in Turkey, Istanbul. I received my bachelor’s degree in Mechanical Engineering from the Yildiz Technical University at Istanbul in 2014. I... Read more

I am specialist engineer with Makhina Robotics Company in Turkey, Istanbul. I received my bachelor’s degree in Mechanical Engineering from the Yildiz Technical University at Istanbul in 2014. I began working as senior design engineer in the defense industry with Repkon Machine Company in 2014. During the past five years i have focused making innovative design for mobile robots. I work over the past five years can be summarized as covering the following subjects: - the design and evaluation of mobile robot system behaviors on load - the investigation of static structural and dynamic analysis for mobile robots - the design and application of mobile robot damper systems - the design of mobile robot techniques and technologies for steering models Also we authored several peer-reviewed articles on mobile robots and participate at a lot of conferences during the past two years as a team in Makhina Robotics. “No assign without design.”

Experienced CAD design engineer specializing in custom solutions. 6 years of experience with strong technical knowledge plastic-metal part designs,machine constructions for private clients Read more

Experienced CAD design engineer specializing in custom solutions. 6 years of experience with strong technical knowledge plastic-metal part designs,machine constructions for private clients

I am a 3D modeling/drafting expert, using Autodesk Inventor, Siemens Nx, SolidWorks, AutoCAD. I have a lot of experience in manufacturing design. I have worked on variety of different tools,... Read more

I am a 3D modeling/drafting expert, using Autodesk Inventor, Siemens Nx, SolidWorks, AutoCAD. I have a lot of experience in manufacturing design. I have worked on variety of different tools, consumer products and machines design. I am very creative and innovative engineer. I am perfectionist and I pay much attention to details, that is very important to me. I always give my 100% in order to do the job perfectly and satisfy my employer. I'm very communicative, and easy to talk to.

Hello, I am Mehmet Fatih Çat. I'm a mechanical engineering student at Kocaeli University. I have been using Solidworks for 6 years actively. Besides that, I have been using AutoCAD for 4 years. I... Read more

Hello, I am Mehmet Fatih Çat. I'm a mechanical engineering student at Kocaeli University. I have been using Solidworks for 6 years actively. Besides that, I have been using AutoCAD for 4 years. I have completed many projects, especially using the SolidWorks program. Such as Ka-band antenna design, SNG vehicles, Flyaway antenna, special design SNG vehicle, Stirling engines, Wind Turbine.

I’m a professional Aerospace Engineer and besides that, I also have education in 3D design and visualization. I create high-quality 3D CAD Part and Assembly Designs, Models and Analyses in a... Read more

I’m a professional Aerospace Engineer and besides that, I also have education in 3D design and visualization. I create high-quality 3D CAD Part and Assembly Designs, Models and Analyses in a variety of CAD programs using my university education and workplace experience. My high poly and low poly 3D models are optimized for the case with proper topologies, materials, and textures, which therefore result in perfect renders and game performance.

I use to Solidworks Cad design professionally. I know surface,profile, 3D design from 2D drawings etc. about Solidworks. I'm professional about design checking fixture, welding fixture and basic... Read more

I use to Solidworks Cad design professionally. I know surface,profile, 3D design from 2D drawings etc. about Solidworks. I'm professional about design checking fixture, welding fixture and basic mechanical systems.

Hello my friends .I graduated from the Mechatronics department at the vocational high school and the control and automation department at the associate degree. I am at the last year of my... Read more

Hello my friends .I graduated from the Mechatronics department at the vocational high school and the control and automation department at the associate degree. I am at the last year of my mechanical engineering education at the undergraduate degree.In the industry since high school internships; I worked as electrical, mechanical, energy, manufacturing, project and field staff.While still continuing my education, I work as a part time engineer in an automation company.I can help you with my experience for years.

I have been working with 3D design programs for a long time. I have worked on both machine, spare parts and industrial product designs, as well as furniture and different sectors.... Read more

I have been working with 3D design programs for a long time. I have worked on both machine, spare parts and industrial product designs, as well as furniture and different sectors. https://www.etsy.com/shop/MerkuDesign https://grabcad.com/oguzhan.ersin-2 You can take a look at some examples of my work.

*CNC torna ve işleme merkezi tezgahlarına hakimim *teknik resim oluşturma ve teknik resim okuma konularına hakimim *solidworks ve auto cad programlarına hakimim Read more

*CNC torna ve işleme merkezi tezgahlarına hakimim *teknik resim oluşturma ve teknik resim okuma konularına hakimim *solidworks ve auto cad programlarına hakimim

Mekatronik Mühendisliği 3. sınıf öğrencisiyim. Teknik resim ve 3D tasarım programlarında başarılıyım. Read more

Mekatronik Mühendisliği 3. sınıf öğrencisiyim. Teknik resim ve 3D tasarım programlarında başarılıyım.

I am a mechatronics engineer. I am working on figure and design projects at Solidworks. I developed myself in 3D designs Read more

I am a mechatronics engineer. I am working on figure and design projects at Solidworks. I developed myself in 3D designs