From a raw idea to a polished product design. I'll do my best to help customer get what he need and exceede initial expectations. Read more

From a raw idea to a polished product design. I'll do my best to help customer get what he need and exceede initial expectations.

I have more than 2 years of experience in CAD/CAM. I`ve prepared more than 100 drafts by which metal parts were made. I`m also familiar with calculations and formulas linked with mechanical... Read more

I have more than 2 years of experience in CAD/CAM. I`ve prepared more than 100 drafts by which metal parts were made. I`m also familiar with calculations and formulas linked with mechanical engineering field. During my education in the leading technical universities in Russia I`ve done several experiments on machine tools diagnostics which I`ve compared with the ones I`ve done in CAE. I`m always going deep in each project in order to fully understand all the demands and requirements to get job done in time and without mistakes.

I have been working as an engineer-designer for the past eight years, six of which have been at large production enterprises working in teams of successful and experienced engineers, carrying out... Read more

I have been working as an engineer-designer for the past eight years, six of which have been at large production enterprises working in teams of successful and experienced engineers, carrying out both large and small projects. I am proficient in the development of light engineering units, various metal structures, sheet metal products, furniture, and have good knowledge of metal working methods. My skill set includes: 3D Design, rendering, drawings, and vector files. I also offer production support in the following areas: 1 - various metal structures including sheet metal structures 2 - equipment for machine tools of metal working 3 - conveyor equipment 4 - loft style furniture 5 - any type of CAD converting 6 - rendering

Hello there I am elkeysar mechanical engineer designer With skills in solidworks, solidcam, camworks, Ansys, coreldraw, swansoft, cnc programing I worked in many projects as designing enclosers... Read more

Hello there I am elkeysar mechanical engineer designer With skills in solidworks, solidcam, camworks, Ansys, coreldraw, swansoft, cnc programing I worked in many projects as designing enclosers for electronics, renew a full technical drawingscatalog, designing a luggage able to be resized with all details from sketches to the manufacturing..etc. My goal is to be creative always in my work and providing the perfect to my clients.

Industrial design, computer science, attention to detail. My achievements: together with a business partner, we are preparing for mass production of a frame and suspension for electric urban... Read more

Industrial design, computer science, attention to detail. My achievements: together with a business partner, we are preparing for mass production of a frame and suspension for electric urban transport. Higher technical education, physical and mathematical education at school, I can write program code in Java, Python, Learned to program and operate Fanuc industrial manipulators, for the last few years I have been fond of designing on the Autodesk Inventor platform.

Experienced mechanical engineer with specialization in Oil&Gas industry, skilled in Autocad and SolidWorks with emphasis on drafting. Proven industry experience in design engineering,... Read more

Experienced mechanical engineer with specialization in Oil&Gas industry, skilled in Autocad and SolidWorks with emphasis on drafting. Proven industry experience in design engineering, manufacturing, procurement and project management along with continuious work in CAD software.

Hello! My name is Valerii. I'm professional BMS design engineer, and Power electrical engineer. I'm looking for new projects (freelance) in Building automation and/or Power electrical. If You have... Read more

Hello! My name is Valerii. I'm professional BMS design engineer, and Power electrical engineer. I'm looking for new projects (freelance) in Building automation and/or Power electrical. If You have some projects in this case, I can do it. About me I have 5 years experience in designing. Last two years I worked like single (independent) engineer (or in small team (3 engineers) where I was senior engineer). I'm interesting in civil, industrial objects, cottages, flats, warehouses. What designs can I do: 1) CCTV: 2) Lightning protection and earthing 3) Lighting (outdoor including) 4) Electrical (Power electrical) 5) Building automation (from field to server); 6) Instrumental and control 7) SKS My expirience in power electrical design: 1) lightning protection and earthing: - completed near 50 objects (two Sea ports, and 1 grain elevator) - can do it on Bettermann, or other manufature. Designig passive lighning protection and active lightning protection - make calculation for lightning protection and earthing; 2) lighting: - completed three objects in Moscow for outdoor lighting with calculation; - working with DiaLux 3) Power electrical design: - completed 18 object of different sizes (most of all it was civil objects; two small objects was completed for Sea port); - I can design automatic input of the reserve; - I have improve skills in calculation. Create Electrical load list is not problem for me; - Electrical single line diagram. I can work with ABB programm, or make it in Autocad; - designing DDC panels - electrical load list - cable trench loyout - cable schedule - cable sizing volt drop calculations 4) I&C design: - I designed BMS system for plant of rigs in Russia (National Oilwell Varco); - I designed BMS system for "METRO" - building automation and control designing included: HVAC, heating system, lighting, room automation, fancoils, gas analys, boiler house, water supply system. - designing MCC panels; - designing fro field equipment to PLC$ - designing BACnet, LON, Modbus network - I/O List for DCS/PLC - instrumentation location How much I will take for designing not so much. For example: Civil object (25 000 sq.m) Building automation (near 1000 points), I took 2500 USD; IF YOU ARE INTERESTIONG OF ME, PLEASE WRITE ME A LETTER. ALSO I CAN SEND MY PROJECTS. Best regards, Engineer, Valerii Didenko

Get the Specialist degree (in Russia similar to Master degree) in Moscow Automobile and Road State Technical University in 2012. Course name was Tuning and technical control, subgroup –... Read more

Get the Specialist degree (in Russia similar to Master degree) in Moscow Automobile and Road State Technical University in 2012. Course name was Tuning and technical control, subgroup – Motorsport car tuning and design. From 2012 till the end of 2015 work in OAO “Prom Komposit”, in division of aerobatic aircraft as design-engineer and tooling design-engineer. The company specializes in the use of advanced composite materials in electronics and aviation, including highly loaded structural parts. At the end of 2015 I won the regional finals Infiniti Performance Engineering Academy and I got a contract with Infiniti Motors Comp in accordance with I must spend 4 months in Nissan Technical Center of Europe, after that – 8 month in Formula One team (originally it was supposed to be Infiniti Red Bull Racing, but due to the termination of the sponsorship by the Infiniti following work place has become a Renault Sport Formula One) in Vehicle Dynamic Engineer role. Here I want to find an extra possibilities to use my desing skills. At this moment I work with a group of aerospace engineers who also ready to take any extra job and improving the world through smart engineering.

Half of my life - is technology, engineering and gadgets. I've found my way when I was 15 years old - I've made my first PC case with led/fan control unit. My second lovve - cars and motorsport.... Read more

Half of my life - is technology, engineering and gadgets. I've found my way when I was 15 years old - I've made my first PC case with led/fan control unit. My second lovve - cars and motorsport. Thats why I start studiyng in MADI (STU).

I'm a design engineer with 8 year experience and working on varios projects at product design studio. They included automotive, transport, medicine, packing, concepts and other electronic devices.... Read more

I'm a design engineer with 8 year experience and working on varios projects at product design studio. They included automotive, transport, medicine, packing, concepts and other electronic devices. To achieve the desired result, I carry out design taking into account the future production technology. Therefore, I am deeply versed in such technologies as plastic injection molding, machining, welding, laser cutting, bending and other.

I have been working in the fiend of mechanical engineering for more than 7 years. I am familiar with modern equipment and technologies. I'll make design and construction of your product.I'll offer... Read more

I have been working in the fiend of mechanical engineering for more than 7 years. I am familiar with modern equipment and technologies. I'll make design and construction of your product.I'll offer options for manufacturing technologies

CAD designer with the use of NX, SolidWorks, AutoCAD. I develop models and drawings tooling, equipment, mechanisms. I know mechanical processing of metals, welding, bending, admissions and landings. Read more

CAD designer with the use of NX, SolidWorks, AutoCAD. I develop models and drawings tooling, equipment, mechanisms. I know mechanical processing of metals, welding, bending, admissions and landings.