Im Mechanical Engineer with hands on experience in design and fabricating for more than 3 years from one of leading Automotive Industry . I get in to freelancing with aim of delivering expertise at lo... Read more

Im Mechanical Engineer with hands on experience in design and fabricating for more than 3 years from one of leading Automotive Industry . I get in to freelancing with aim of delivering expertise at low cost and best quality. I'm a certified solid works Associate (CSWA) by Dassault Systèmes. I have very good knowledge on Solid Works and CATIA(using for 3 years). I have expertise in Mould tooling ,Plastic design, solid modelling, Surface design,Assembly design, simulation analysis, Drafting . I am looking for full time freelancing jobs most willing to associate for long time. looking for more challenging in various streams to develop my expertise further. I take all responsibility to all projects i work on for best customer satisfaction.

I am a CAE Engineer with strong experience in crash analysis, simulation, and mechanical validation. I work extensively with: PAM-CRASH ANSA & META (pre- and post-processing) I deliver high-quality... Read more

I am a CAE Engineer with strong experience in crash analysis, simulation, and mechanical validation. I work extensively with: PAM-CRASH ANSA & META (pre- and post-processing) I deliver high-quality results with OEM Standard in: Full vehicle & subsystem crash simulations FlexPLI, UN-R127, pedestrian protection, and interior safety FEA modelling, meshing (shell/solid/hex), connections, material cards Reporting, quality gate presentations, and DP reviews CAD clean-up and CAE model preparation Please take a look at my profile & portfolio. I also work with clients outside this platform, consistently delivering high accuracy within timelines, and they’ve always been delighted with the results. I would be glad to bring the same level of precision, reliability, and crash-analysis expertise to your project. Thanks in advance!

I am a Manufacturing Engineer with Engineering design as my special skill. I have 8 years of experience and have achieved a lot of achievements in those skills. As an Engineering Designer, I professio... Read more

I am a Manufacturing Engineer with Engineering design as my special skill. I have 8 years of experience and have achieved a lot of achievements in those skills. As an Engineering Designer, I professionally produce the following projects as: 1. 3D Modelling (Standard - Expert Modelling) 2. 3D Modelling from 3D Scanner Data (Mesh Data)) 3. 3D Assembly Modelling 4. 3D Exploded Modelling 5. Engineering Drawing for Manufacturer (GD&T, Welding Symbol) 6. Render Animation Engineering Simulation 7. Rendering Realistic Image. Create an engineering drawing according to the ISO Standard and put it through Engineering Drawing. I'm working with Autodesk Inventor Professional, Autodesk AutoCAD 2D & 3D, Solidworks, Siemens Solid Edge, and NX CAD/CAM. As a Manufacturing Engineer College, what I learned are : 1. Material Science 2. Fluid Mechanics 3. Engineering Mechanics 4. Manufacturing Process (Sheet Metal Fabrication, Injection Plastic, Welding, Machining, and Sand Casting Process) (Theory and Practice) 5. Material Strength 6. Production Planning 7. Automation (Programming and Practice) 8. Pneumatics and Hydraulics (Programming and Practice) 9. Occupational Health and Safety 10. Engine/Machine Element 11. Jig and Fixture Design 12. Industry Statistics 13. Industry Layout Modelling and Facility Planning 14. Choosing Material and Process 15. Maintenance (Theory and Practice) 16. Supervisor/Supervision Techniques 17. Internship

Greetings Humble Client 👋 Hope you're doing well 💪 !!! Looking to turn ideas into market-ready products? I provide end-to-end design and engineering support that helps businesses move from concept... Read more

Greetings Humble Client 👋 Hope you're doing well 💪 !!! Looking to turn ideas into market-ready products? I provide end-to-end design and engineering support that helps businesses move from concept to production with confidence. From design thinking workshops and ideation sessions to 3D modelling, simulation, and optimization, I ensure every stage of development is creative, technically sound, and manufacturable. Whether it’s reverse engineering an existing product, validating a new concept, or streamlining design for manufacturing, you get solutions that are practical, efficient, and aligned with industry standards — so your product is not only innovative but also ready for real-world success. I’m Sanjay Karthik, an Industrial Design Engineer & Systems Integrator specializing in Product Design & Development for Multiple Engineering sectors. With years of experience in Product Design & Development; transforming complex engineering problems into manufacturable and deployable technological solutions that meet the demands just right and also align with the latest engineering design standards is and has been our forte. ---------------------------------------------- 🏭 My Industrial presence includes, but not limited to; 🚗 - Automotive Systems ⚙️ - Heavy-Machinery ⚡ - Power Systems ---------------------------------------------- 💼 Top-rated Industrial Expertise that delivers results to your business; 🔹 Design Thinking & Product Ideation 🔹 Product Development Sketching 🔹 Conceptual Form Pre-structuring 🔹 Design for Manufacturing (DFM) 🔹 FEA-Driven Optimization & Validation ---------------------------------------------- 💎 What sets me apart as an Industrial Design Engineer 🔸 Proven Track Record - Successfully completed over a dozen of well optimized & efficient projects. 🔸 Ingenious Innovations - Catered unique & customized solutions within industrial adaptability. 🔸 Creative Design Solutions - Fabricated exceptional designs by pushing beyond the limits of creativity. 🔸 Design Certifications - Proficient in Multiple Design, Analysis and Manufacturing Software. 🔸 Vast Industrial Exposure - Designed products tailored to different engineering domains and disciplines. ---------------------------------------------- 🤝 Why choose to collaborate with me? ⭐ Exceptional Quality - Delivering precise Engineering Solutions that exceed expectations. 🗣️ Transparent Communication - Regular updates and follow-ups throughout the Project tenure. 💡 Innovative Thinker - Catered Innovative Unique solutions to complex problems over the years. ---------------------------------------------- 🚀 Let's Turn Your Vision Into Reality! Ready to elevate your engineering projects with unparalleled computational power and expertise? Feel free to leave a message as I instantly respond to queries. I'm excited to collaborate and help you achieve your goals. ---------------------------------------------- 📞 Get in Touch Contact me today for a session to discuss your project needs. Let's work together to make something phenomenal. ----------------------------------------------

Passionate Automobile Engineer with hands-on experience in AutoCAD, SolidWorks, and Creo for designing and modeling automotive components. Strong interest in vehicle dynamics, powertrains, and emergin... Read more

Passionate Automobile Engineer with hands-on experience in AutoCAD, SolidWorks, and Creo for designing and modeling automotive components. Strong interest in vehicle dynamics, powertrains, and emerging automotive technologies. Skilled in creating precise 3D models, simulations, and technical drawings, with a keen eye for detail. Eager to apply knowledge and contribute to innovative automotive projects. Adept at problem-solving and collaboration, with a focus on efficiency and performance improvement in the automotive sector

Creative and detail-oriented CAD Engineer with hands-on experience in Fusion 360, Inventor, Solidwoks and mechanical design. Proficient in 3D modeling, parametric assemblies, surface modeling, and sim... Read more

Creative and detail-oriented CAD Engineer with hands-on experience in Fusion 360, Inventor, Solidwoks and mechanical design. Proficient in 3D modeling, parametric assemblies, surface modeling, and simulation for engineering purposes. Enthusiastic about turning conceptual designs into accurate, manufacturable parts, having exposure to FEA, motion analysis,

I’m Devasudhan, a Mechanical Engineer with over 3.5 years of hands-on experience in product development and R&D. My work centers on turning ideas into functional, manufacturable products—combining str... Read more

I’m Devasudhan, a Mechanical Engineer with over 3.5 years of hands-on experience in product development and R&D. My work centers on turning ideas into functional, manufacturable products—combining strong design expertise with practical engineering insight. I specialize in 3D modeling using SolidWorks and Autodesk Fusion 360, and I’ve led numerous projects involving advanced FEA and CFD simulations for structural, thermal, and fluid-flow applications. My background also includes extensive prototyping, validation, and end-to-end new product development, giving me a well-rounded understanding of both digital and physical engineering processes. I enjoy solving complex engineering challenges and building products that are reliable, efficient, and ready for real-world use.

Hello, i am Sivaprakash from India. I started freelancing when I was perusing my 2nd year of engineering and successfully completed several contests in this freelancing platform. Now that i have compl... Read more

Hello, i am Sivaprakash from India. I started freelancing when I was perusing my 2nd year of engineering and successfully completed several contests in this freelancing platform. Now that i have completed B.Tech in Mechanical engineering with honors, I have hands on experience in designing parts for injection molding, 3D printing, Special Purpose Machineries and visualizations. Now i am working as a structural design engineer in the renewable energy sector and dedicating my knowledge to solve my clients' problems related to design. I design tools for erection and de erection of wind turbine components. My main vision as a freelancer is to deliver quality service to my clients and make sure that their time and money is valued. I expertise in Solid works | NX cad | Keyshot | Autocad Am always open for new projects. Thank you for visiting my profile.

Forward thinking Mechanical Engineer. Skilled in Design, Analyse and Simulation and with a strong understanding knowledge in Computational Fluid Dynamics-CFD, Gas Dynamics, Heat transfer, Engineering... Read more

Forward thinking Mechanical Engineer. Skilled in Design, Analyse and Simulation and with a strong understanding knowledge in Computational Fluid Dynamics-CFD, Gas Dynamics, Heat transfer, Engineering Mechanics and Principles, Operational and production coupled with excellent communication & presentation skills, Highly motivated and eager to learn new things.

I am a Mechanical Product Design Engineer with strong expertise in SolidWorks 3D modeling, drafting, rendering, and simulation (FEA & Flow). My focus is on creating designs that are accurate, efficien... Read more

I am a Mechanical Product Design Engineer with strong expertise in SolidWorks 3D modeling, drafting, rendering, and simulation (FEA & Flow). My focus is on creating designs that are accurate, efficient, and ready for manufacturing. I have hands-on experience in: Drafting & Detailing: Preparing precise technical drawings with GD&T for manufacturing. Rendering: Producing photorealistic visuals to help clients better understand their product concepts. Simulation: Running structural (FEA) and flow (CFD) analyses to validate performance and reliability. I enjoy turning ideas into well-engineered, practical solutions—whether it’s a new product, a prototype, or detailed production drawings. My goal is always to deliver clear, high-quality results that save clients time and ensure smooth manufacturing.

👨‍💼 About Me I'm a passionate freelance Mechanical Engineer with 6+ years of hands-on experience designing and delivering innovative mechanical systems and products. My core strength lies in transfo... Read more

👨‍💼 About Me I'm a passionate freelance Mechanical Engineer with 6+ years of hands-on experience designing and delivering innovative mechanical systems and products. My core strength lies in transforming concepts into manufacturable products across various sectors — from industrial machines and drones to custom devices for automotive and agricultural needs. I specialize in providing end-to-end design solutions — CAD modeling, simulation, prototyping, and production support. 🛠️ Core Skills CAD Tools: SolidWorks, AutoCAD, Fusion 360, Creo, Simulation & Analysis: FEA (ANSYS), Thermal analysis Prototyping: 3D Printing, CNC, Sheet Metal, Fabrication Manufacturing Support: DFM, BOM, Vendor Coordination Documentation: Technical Drawings, Assembly Guides, User Manuals Project Management: Windchill, Team Center 📂 Project Highlights 🔹 Product Design – Industrial Machines & Automation Designed custom Special Purpose Machines (SPMs) for food processing, furnace systems, and automated factory shutters. Developed mechanical components, assemblies, and control integration with sensors and actuators. Created manufacturing-ready drawings, BOMs, and supervised prototype builds. 🔹 Drone Design – From Concept to Production Developed various UAV platforms: VTOL Drones for long-range delivery Agricultural Drones for pesticide spraying Mapping Drones with GPS-based navigation Complete mechanical design, structural analysis, motor & propeller integration, payload balancing, and enclosure design. 🔹 Automotive Product Engineering Converted artistic/3D concepts into practical and manufacturable mechanical designs. Designed fixtures, brackets, and enclosures suitable for high-volume automotive production. Experience with plastic part design, sheet metal, and surface modeling. 📈 Clients & Industries Served Startup UAV Manufacturers Food & Beverage Factories Automation and Robotics Companies OEM Suppliers in Automotive Industrial Equipment Suppliers 📩 Let’s Connect I'm always open to collaborating on innovative and challenging mechanical engineering projects. Whether it's early-stage product ideas or production-ready systems — I can support at every stage. Best Regards, Mathivanan Matheshwaran

End to end Simulation Workflow for Structural Integrity and Dynamic Performance of HVAC Systems, Industrial products & Heavy Structures using FEA Techniques -Linear & Nonlinear Static Analysis → For... Read more

End to end Simulation Workflow for Structural Integrity and Dynamic Performance of HVAC Systems, Industrial products & Heavy Structures using FEA Techniques -Linear & Nonlinear Static Analysis → For structural strength and deformation. -Modal & PSD Analysis → For dynamic behavior. -Solver Calibration, Precision Meshing → Reflecting accuracy. - Harmonic Analysis → To evaluate system response under sinusoidal excitations and detect resonance risks . - Thermal Analysis → For assessing thermal stresses, heat transfer efficiency. -Design Recommendations → durability enhancements.

Tool Designing Skills This service offers our expertise and infrastructure to meet the client’s delivery schedules. Tool design activity at AMIGGENGINEERINGSERVICES includes understanding the client’s... Read more

Tool Designing Skills This service offers our expertise and infrastructure to meet the client’s delivery schedules. Tool design activity at AMIGGENGINEERINGSERVICES includes understanding the client’s products, production requirements, and the infrastructure. Solid Modeling of the Product , Tool, and creation of manufacturing drawings follow this methodology. We offer tool design services for: ➢ Jigs & fixtures ➢ Press tools ➢ Plastic moulds ➢ Die casting dies Computer aided design programs are used across a wide range of industry sectors. Modern CAD tools are providing designers with the ability to share, test, and modify product drafts like never before. Using the latest 3D CAD software can drive innovation and inspire new ways of thinking. As advances in CAD technology continue, this powerful tool is revolutionizing how industries develop and manufacture their products. For tool and machine design AMIGGENGINEERINGSERVICES is using popular CAD software includes industry powerhouses like SolidWorks, CATIA and Siemens NX, for complex assemblies, alongside accessible options like Autodesk Fusion 360 (all-in-one) and Autodesk Inventor (strong simulation), while AutoCAD remains a staple for 2D/3D drafting, with specialized tools .. Virtual modelling techniques create digital representations using methods like Polygon/Mesh Modeling, NURBS/Spline Modeling, and Digital Sculpting for shapes, plus Procedural Modeling, 3D Scanning, and AI-driven approaches for realism and complex data, spanning industries from gaming (polygons) to engineering (CAD/NURBS) and fashion (AI/simulation). Core methods focus on geometric construction (wireframe, solid, surface) or data-driven approaches (AI, simulation) to build digital assets for VR, engineering, or digital twins, often involving texture mapping and physics simulation

⚡ Experienced Electrical Design Engineer | Precise Drawings, ETAP & DIALux Lighting Simulations I deliver accurate, code-compliant electrical designs that ensure reliability, safety, and practical i... Read more

⚡ Experienced Electrical Design Engineer | Precise Drawings, ETAP & DIALux Lighting Simulations I deliver accurate, code-compliant electrical designs that ensure reliability, safety, and practical implementation for your projects. From concept layouts to as-built documentation, I provide complete design packages tailored to technical and compliance requirements. 🔧 Core Skills & Services Electrical Drawings: Single Line Diagrams (SLD), layouts, schematics Load Calculations: Load flow, short circuit, protection coordination (ETAP) Lighting Systems: Normal & emergency lighting SLDs, layouts, and arrangements DIALux evo Lighting Calculations: Interior, exterior & street lighting design with compliance to standards Fire Detection Systems: Layouts and wiring diagrams Control & Power Systems: Wiring diagrams, termination drawings, interconnection layouts Cabling: Cable tray design, routing, sizing, length estimation Documentation: As-built drawings, Bill of Materials (BOM), Bill of Quantities (BOQ) Special Systems: Public Address (PA) system diagrams & layouts Standards Compliance: IEC, IEEE, and project-specific requirements ✅ What You Can Expect Clear and professional documentation Practical solutions aligned with compliance & safety standards Reliable communication and on-time delivery Ready to start your project? Click "Invite to Job" and let’s discuss your requirements.

I am Parthiban, an experienced R&D Design Engineer with a strong passion for innovation and problem-solving. Specializing in mechanical design, CAD modeling, prototyping, and simulation, I work on tr... Read more

I am Parthiban, an experienced R&D Design Engineer with a strong passion for innovation and problem-solving. Specializing in mechanical design, CAD modeling, prototyping, and simulation, I work on transforming concepts into manufacturable solutions that push the boundaries of technology. With expertise in industry-standard tools like SolidWorks, Creo and ANSYS. I focus on creating high-performance, reliable designs that meet both functional and aesthetic requirements. I thrive on solving complex engineering challenges, optimizing designs, and ensuring manufacturability from the initial concept to the final product.

CONCEPT MODELLING TO FINAL PRESENTATION ALL THE 2D AND 3D WITH ANIMATION WITH SIMULATION INTERIOR DESIGN ,ARCHITECTURAL DESIGN,LANDSCAPE DESIGN, WITH 2D -3D PRESENTATION USING VARIOUS DESIGN SOFTWAR... Read more

CONCEPT MODELLING TO FINAL PRESENTATION ALL THE 2D AND 3D WITH ANIMATION WITH SIMULATION INTERIOR DESIGN ,ARCHITECTURAL DESIGN,LANDSCAPE DESIGN, WITH 2D -3D PRESENTATION USING VARIOUS DESIGN SOFTWARE SCALE MODEL WITH FOAM BOARD FOR 1:100 ,1:500 AND ANY OTHER CUSTOM SCALE

I am Mechanical Engineer and Industrial Designer by profession. I have more than 3 year experience in developing mechanical 3D products and engineering 3D models including simulation and analysis. Se... Read more

I am Mechanical Engineer and Industrial Designer by profession. I have more than 3 year experience in developing mechanical 3D products and engineering 3D models including simulation and analysis. Services Provided: •3D Modeling and Product Design. •Assembling, Kinematics and Analysis. •2D and 3D Technical Drawings, Exploded Views and Bill of Materials. •3D printable files and CNC file formats. •High resolution 3D Rendering with realistic textures and lighting. •3D Animations •2D Drawings •3D Assembly •STL File of your design •Mechanical Blueprints •Structure Drawings •Pressure Vessel Drawings •High Quality Renderings •Convert any sketch, pdf, jpeg or png to DWG to In this gig, I will do Mechanical engineering or 3D models with analysis and simulations in softwares including CATIA and AUTOCAD etc. High quality RENDERING is also provided in this service. With a vast experience in Mechanical Engineering, i am here to help you invent or create your mechanical product with high quality mechanical engineering. Don't hesitate order now. File Format - STEP / STP / STL / SLDPRT / SLDASM/3MF / IGES/OBJ/DXF/DWG/ VRML / PNG / JPEG / PDF

As a Mechanical Design Engineer, your core responsibility is to bridge the gap between conceptual 2D engineering drawings and fully functional 3D models. You translate 2D sketches, blueprints, or lega... Read more

As a Mechanical Design Engineer, your core responsibility is to bridge the gap between conceptual 2D engineering drawings and fully functional 3D models. You translate 2D sketches, blueprints, or legacy drawings into precise 3D CAD models, which are essential for visualization, simulation, and manufacturing. You also generate detailed 2D drafting from these models, which serve as the official documentation for manufacturing and production teams

Starting my career as an Application Engineer at India and with some research knowledge in Material Science at a Technical University from Germany, I have a well-versed practical experience in using A... Read more

Starting my career as an Application Engineer at India and with some research knowledge in Material Science at a Technical University from Germany, I have a well-versed practical experience in using Autodesk CAD/CAM/CAE/PDM Softwares. My software exposure is on 1) CAD: Autodesk Inventor Professional - In Design Automation using iLogics, Mold and Tool-Base Designing and Sheetmetal and Nesting knowledge for Laser cutting 2) CAM: Inventor CAM, Autodesk PowerMill, Autodesk FeatureCAM and Fusion 360 - Here I possess a practical knowledge in 2,3 and 5-Axis CAM for Milling, Turning, Mill-Turn and Turn-Mill Centers 3) CAE: Well versed in doing static and dynamic simulations using Autodesk Inventor Nastran. The Analysis studies I am familiar with is on Linear and Non-linear Static stress, Linear and Nonlinear Buckling, Normal Modes, Modal and Direct Frequency Response Tests Nonlinear Transient Response and Impact Test My Masters in Material Science comes hand in hand here understanding the different material types, analysis methods and material failure scenario. 4) PDM (Product Data Management) : Here I am well versed with using Autodesk Vault Professional where I had the chance to implement Vault Pro at our customer site for the entire Engineering Design Team of Designers, Checkers and Approvers to streamline their entire Engineering design activities, which gave me a better understanding of how Vault works and how to implement it in an Engineering Team.

I am a dedicated Mechanical Engineering student with extensive expertise in CAD design, product development, and engineering simulations. My technical skills include proficiency in industry-standard t... Read more

I am a dedicated Mechanical Engineering student with extensive expertise in CAD design, product development, and engineering simulations. My technical skills include proficiency in industry-standard tools such as SolidWorks, AutoCAD, Fusion 360, CATIA, and ANSYS, allowing me to create precise 2D/3D models, perform FEA (Finite Element Analysis), and execute CFD (Computational Fluid Dynamics) simulations. Throughout my academic journey, I have completed several innovative projects, such as designing hydraulic systems for shaping machines, optimizing gear mechanisms, and conducting kinematic analyses for advanced mechanical systems. These experiences have strengthened my ability to deliver efficient, reliable, and practical engineering solutions tailored to client needs. I excel in mechanical design calculations, including stress and load analysis for gears, shafts, and structural components, ensuring precise and accurate results. I also have hands-on experience in prototyping and optimization, helping clients bring their concepts to life while achieving cost-effective and sustainable designs. In addition to my technical expertise, I bring strong problem-solving and analytical skills to every project. Whether it involves creating functional CAD models, performing detailed engineering simulations, or delivering comprehensive technical documentation, I am committed to producing work that meets the highest standards of quality and functionality. My strengths include time management, attention to detail, and a passion for innovation. I take pride in translating complex engineering challenges into innovative solutions, ensuring that every project I undertake exceeds expectations. Let’s collaborate to turn your ideas into reality with precision, creativity, and technical excellence.

Dynamic and detail-oriented Stamping Process & Simulation Specialist with over 18 years of experience in stamping die design, process development, and simulation. Expertise in CATIA, NX, Autoform, and... Read more

Dynamic and detail-oriented Stamping Process & Simulation Specialist with over 18 years of experience in stamping die design, process development, and simulation. Expertise in CATIA, NX, Autoform, and CADCEUS with a strong ability to analyse, develops, and optimizes stamping processes. Proven track record of delivering high-quality design solutions for global automotive clients, including FORD and GM

A little about Etroit Technologies Pvt. Ltd.: Etroit Technologies provide solutions with numerical/mathematical modeling – FEA/CFD in the arena of industries from food to cement to steel; includin... Read more

A little about Etroit Technologies Pvt. Ltd.: Etroit Technologies provide solutions with numerical/mathematical modeling – FEA/CFD in the arena of industries from food to cement to steel; including chemicals/minerals, energy and oil & gas. We strongly believe that we can add value to your organization with custom solutions in terms of problem driven FEA/CFD services that can augment your in-house engineering design, drafting, and analysis capacity to reduce cost and time to market. Our service includes: CAD 2D – 3D Modeling Reverse Engineering New Product Development Parametric Modeling (API) Engineering Detailing (GD & T) CAE Finite Element (FE) Modeling & Analysis Computational Fluid Dynamics (CFD) Solutions Motion simulation/analysis CAM Programming support.

Greetings We Are a Group Of Friends Studied In Same College Experienced in Design Field In Various Industries Using Different Softwares Including Industrial Designer, Mechanical Design with analysis a... Read more

Greetings We Are a Group Of Friends Studied In Same College Experienced in Design Field In Various Industries Using Different Softwares Including Industrial Designer, Mechanical Design with analysis and simulation in software. We Are Expert in AUTOCAD, AUTODESK INVENTOR, CATIA, CREO, FUSION 360 and ANSYS etc. We Are Here to help your Needs. We Provide High-quality Engineering & Design product Services. If you Need We can Also use sustainability Using Circular Economy To Design. I Have Attached Some Of My work samples If you Need More Samples Files (not Img) Part File I can Also Share With You. Thank You

Experienced CAE Analyst and CAD Designer with 3.10 years of hands-on experience in simulation (CAE) and design (CAD) roles. • 3.9 years of Experience on FEA Static Structural analysis, Stress Analysis... Read more

Experienced CAE Analyst and CAD Designer with 3.10 years of hands-on experience in simulation (CAE) and design (CAD) roles. • 3.9 years of Experience on FEA Static Structural analysis, Stress Analysis, Linear and non linear simulation using Ansys Workbench for Automotive components. • Experience on Machine learning - Artificial Intelligence( Al) to obtain the Real test material stress strain curve and its Mechanical properties using Artificial Neural network ANN. • Experience in creating an workflow of Artificial Intelligence in Simulation Activites(Al in Stamping Simulation, FEA simulation- Static and dynamic simulation).. • Expertise in Stamping Simulation, stamping tool design, Blank optimisation & provide design changes/suggestions to the Process team • Expertise in Forming simulations like Riveting, Crimping, Fitting, Coining, Cutting, Orbital Forming, performing Design of Experiments (DOE) • Experience in Welding Simulations and Heat treatment simulation • Bridging the gap between the real test results and the Simulation results by Results mapping process (Manufacturing simulation to FEA Simulation) • Proficient in utilizing a range of software tools including Altair Hyperworks, ANSYS, Simufact, COLDFORM, MATLAB, Pro-E (Creo), Solidworks, Spaceclaim, and Catia V5 • Specialized in FEA simulation for powertrain components, manufacturing simulations, DOE studies, and CAE automation using MATLAB to enhance efficiency and reduce costs • Adept at creating 2D drawings, 3D part models, assemblies, and providing design modifications for automotive powertrain systems • Experience in creating MATLAB Scripts to optimise the simulation Pre processing workflow.

As a skilled mechanical engineering student with hands-on experience in CAD modeling and engineering simulations, I specialize in delivering high-quality 3D design and analysis solutions. I am profici... Read more

As a skilled mechanical engineering student with hands-on experience in CAD modeling and engineering simulations, I specialize in delivering high-quality 3D design and analysis solutions. I am proficient in industry-standard tools such as SolidWorks, AutoCAD, and ANSYS for both FEA and CFD simulations. My expertise includes part and assembly modeling, detailed technical drawings, tolerance analysis, and optimization for manufacturability. I have successfully executed projects involving structural analysis, thermal simulations, and fluid flow studies, ensuring accurate and reliable results. Whether you're developing a new product or validating an existing design, I bring a detail-oriented, problem-solving mindset to every task, ensuring both functionality and efficiency are achieved.

I am a focused and reliable CAD 3D Modeler with practical experience in creating 3D models and basic 2D drafts using AutoCAD, currently working on a contract basis at SMA Design Solutions. I specializ... Read more

I am a focused and reliable CAD 3D Modeler with practical experience in creating 3D models and basic 2D drafts using AutoCAD, currently working on a contract basis at SMA Design Solutions. I specialize in developing clean, accurate models and layouts that align with client requirements, engineering sketches, and reference materials. My strengths lie in understanding project needs quickly, translating concepts into clear CAD representations, and maintaining attention to detail throughout the drafting process. I am well-versed in layer management, 3D modeling tools within AutoCAD, and standard drafting practices. I am now seeking a remote CAD modeling opportunity where I can apply and expand my skills in a professional and deadline-driven environment. I bring with me a strong work ethic, adaptability, and the ability to deliver consistent, quality output independently. Project Involvement: Daylight & Sunlight Simulation Projects As part of my ongoing role at SMA Design Solutions, I contribute to daylight and sunlight simulation projects that evaluate natural light penetration and shading within architectural and structural designs. My responsibilities include: Creating accurate 3D models in AutoCAD based on architectural plans and site layouts. Setting up models for sunlight studies as per location, date, and orientation to assess daylight exposure and shadow movement. Supporting design teams in complying with regulatory norms (e.g., Right to Light, shadow impact analysis) by delivering clean, simulation-ready CAD models. Collaborating closely with senior designers and simulation experts to ensure the accuracy of spatial layouts and visibility zones. Ensuring project timelines are met while maintaining model integrity and clarity for effective sunlight analysis. These projects have helped me strengthen my understanding of spatial planning, daylight behavior, and the integration of CAD modeling into performance-based building design.

I am Arun Vignesh Ram B, a Mechanical Engineer. I have been designing components for more than 2 years now. I started it as a way of earning extra money during my college days and I have nearly one ye... Read more

I am Arun Vignesh Ram B, a Mechanical Engineer. I have been designing components for more than 2 years now. I started it as a way of earning extra money during my college days and I have nearly one year of Industrial Experience. I have been involved with Design and Development of Integral Coach Factory of Indian Railways in design and development and also in designing components for a precision machine manufacturing industry apart from my freelance experience in designing mechanical components for individual people. I am here because I would like to get some challenging projects so that I can spend my free time on it.