Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawin... Read more

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawing, Structural drawing, detailed fabrication drawing of skid assemblies based on technical and client requirements. Preparing BOM and coordinating for the selection of suitable materials for various components to meet design reliability and quality goals. Making detail drawings for pipe lines, plate cutting plan, detail fabrication drawings & schemes for structural steel, field change proposals. Designing and developing piping lay-out and planning studies up to detailed engineering and production of general arrangement & piping fabrication drawings as deliverables. Making general arrangements for piping and equipment sections and details. Routing of process & utility lines as per P&ID, equipment, foundation & structural layout. Developing the conceptual design & piping item as per codes and standards of piping entailing drawings & specification study, vendor selection & finalization, schedule for development, tool modification and final approval. Assisted in preparation of drafting operating procedures for ensuring quality assurance in the preparation and execution of drafting documents. AutoCAD Plant 3D software Admin.- Preparation and Updating of Library and settings as each required detail’s such as BOM (with relevant data’s), weld no. list, Spool no. list, Pipe cut piece length list and Weight table are available in the output drawings. Actively participated in preparing valves and instruments in 3D as real shape and upload to library & AutoCAD Plant 3D – Spec Editor. Preparation and checking of API 650 Storage tanks, structure & civil foundation drawing. AutoCAD Plant 3D independently with minimal guidance/supervision. Can train and check the work of less experienced drafting and design personnel and improve the overall performance of company. Participate in progress / Design review and Technical meeting with clients & Consultants.

* I am skilled and 12+ years experienced in the "Blender". * I was completed "Diploma in Multimedia and Webmaster" in 2002

* I am skilled and 12+ years experienced in the "Blender". * I was completed "Diploma in Multimedia and Webmaster" in 2002

Hi I am gokulnath professional designer and an engineer.I had an experience in 3D modeling ,engineering drawings

Hi I am gokulnath professional designer and an engineer.I had an experience in 3D modeling ,engineering drawings

Mechanical Design Engineer (Freelancer) | Product Design | NPD | Sheetmetal | Reverse Engineering | Scan to BIM | DFM&DFA | GD&T| 2D Drawings | Drawing Review | Tolerance Stack up | Autodesk Inventor... Read more

Mechanical Design Engineer (Freelancer) | Product Design | NPD | Sheetmetal | Reverse Engineering | Scan to BIM | DFM&DFA | GD&T| 2D Drawings | Drawing Review | Tolerance Stack up | Autodesk Inventor | AutoCAD | SolidWorks Strengths and Skill Sets: 01.Technical Proficiency: Over 10+ years of experience in mechanical design using Autodesk Inventor, AutoCAD, AutoCAD Plant 3D, Autodesk Revit, Navisworks, and Autodesk ReCap. 02.Scan-to-BIM Expertise: Skilled in reverse engineering and Scan-to-BIM workflows, including processing point cloud data, modeling ducting systems, and coordinating multidisciplinary models. 03.3D Modeling and 2D Drawing: Expertise in creating engineering drawings, top-level assemblies, and detailed part drawings with GD&T standards. 04.Industry Knowledge: In-depth understanding of renewable energy components, wastewater treatment systems, mining equipment, pharmaceutical facilities, and heavy engineering fabrication. 05.Project Management: Skilled in client collaboration and oversight of piping and mechanical design activities across all project phases. Key Accomplishments: 01.Successfully designed 3D piping arrangements and isometric drawings for renewable energy plants at Metzuyan Technologies, ensuring full compliance with P&ID specifications. 02.Led the development of skid designs and detailed piping layouts for wastewater treatment systems at L&T Technology Services, improving design accuracy and project efficiency. 03.Conducted stress analysis and developed comprehensive GA and P&ID drawings for mineral extraction equipment at Tenova India, meeting stringent client process and safety requirements. 04.Executed Scan-to-BIM projects in the pharmaceutical industry, using Autodesk ReCap to process point cloud data and Autodesk Revit to model HVAC ducting systems, with model coordination and clash detection performed in Navisworks.

I’m Professional Product Designer, CAD Designer and Vessel Designer with 15 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design... Read more

I’m Professional Product Designer, CAD Designer and Vessel Designer with 15 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design, Pressure Vessel Design, Valve Design, Reverse Engineering, GD & T and Mechanical Software Tutoring using AutoCAD, Autodesk Inventor, Solid works and Creo Tools. SERVICE I PROVIDE HERE:  MOLD DESIGN: - Preparing DFM ( Design for Manufacturing) - Creating Conceptual Sketch - Creating Product Modeling or 3d Modeling - Preparing Core and cavity Splitting - Preparing Mold design or Tool Design - Creating Technical Drawings which is related to 3d models /Assembly. - Creating STL, IGES and STEP files for 3d Printing. - Creating Electrode Model for Electric Discharge Machining(EDM). - Creating DXF files for CNC/ Laser cutting Machine, Wire Cutting machine. - Preparing CNC Program for Turning and Milling Machine. - 2d CAD drafting in AutoCAD. - BOM list - Creating Model based definition Model (MBD) for Industry 4.0 - Geometric and Tolerance Support and Tutoring  PRESSURE VESSEL DESIGN: - General Arrangement Drawing for Horizontal vessel or Vertical Column - 3d cad Modeling for Pressure Vessel. - Fabrication drawing for Pressure Vessel. - Plate cutting detail - Process Equipment Based Internal Modeling and Detailing - Piping Modeling and Detailing - BOM list for Manufacturing - Valve Design  DATA ENTRY: - Conversion from PDF to Word - Audio transcription - Business or Meeting PPT Preparation  SKILLS: AutoCAD 2018, Creo-4, Solidworks-2019, Autodesk Inventor-2020, Solid edge, Delcam, Mastercam, Microsoft Word, Excel, Presentation

I enjoy experiment with different ideas to visualization on 3d cad . Proficient in utilizing siemens nx, autocad, ug nx

I enjoy experiment with different ideas to visualization on 3d cad . Proficient in utilizing siemens nx, autocad, ug nx

I'm a Design Engineer and my core works are product design, development and analysis. Creativity and time management are those two skills I adore much than other. I have provided many works to clients... Read more

I'm a Design Engineer and my core works are product design, development and analysis. Creativity and time management are those two skills I adore much than other. I have provided many works to clients and best project I would say is a satellite prototype. My area of expertise product developing and analyzing it.

Passionate Automobile Engineer with hands-on experience in AutoCAD, SolidWorks, and Creo for designing and modeling automotive components. Strong interest in vehicle dynamics, powertrains, and emergin... Read more

Passionate Automobile Engineer with hands-on experience in AutoCAD, SolidWorks, and Creo for designing and modeling automotive components. Strong interest in vehicle dynamics, powertrains, and emerging automotive technologies. Skilled in creating precise 3D models, simulations, and technical drawings, with a keen eye for detail. Eager to apply knowledge and contribute to innovative automotive projects. Adept at problem-solving and collaboration, with a focus on efficiency and performance improvement in the automotive sector

Design engineer with 3 years of strong experience in product engineering. Proven ability to work on multiple projects. Possess extensive practical experience utilizing 2D and 3D CAD modelling applicat... Read more

Design engineer with 3 years of strong experience in product engineering. Proven ability to work on multiple projects. Possess extensive practical experience utilizing 2D and 3D CAD modelling applications to visualize design specifications. Facilitate project success with cost-effective design solutions.

Detail-oriented mechanical design engineer with 5 years of experience.Highly proficient in designing prototypes and functional products using CAD softwares.Familiar with industrial equipment and machi... Read more

Detail-oriented mechanical design engineer with 5 years of experience.Highly proficient in designing prototypes and functional products using CAD softwares.Familiar with industrial equipment and machinery. Sound knowledge of general machining techniques, various manufacturing processes and sheet metal forming.

Student who actively participates in all walks of mechanical engineering and specialises in the sectors of Design and Analysis. 3D printing of materials is also one of the my area of interest and have... Read more

Student who actively participates in all walks of mechanical engineering and specialises in the sectors of Design and Analysis. 3D printing of materials is also one of the my area of interest and have on-hands experience with this field of science.

I am manoj kumar das from Odisha ,india. i have complete B-Tech in mechanical engineering from Univercity of mumbai & Complete Master programming in CAD/CAM from Central institue of plastic engineerin... Read more

I am manoj kumar das from Odisha ,india. i have complete B-Tech in mechanical engineering from Univercity of mumbai & Complete Master programming in CAD/CAM from Central institue of plastic engineering & technology (CIPET). i have 6 years of vast exprience of Design & Devlopment of Verious OEM & tear one Automotive supplier like,RENAULT,HUNDAI,KIA,PININFERINA.my best skill is CATIA V5,UG NX,powerpoing,knwoladge about PLM Drawing reading skill,GD&T,Product design,Product Devlopment,Parametric modeling,Drafting etc

Final year mechatronics student and passionate CAD designer with knowledge and interest in 3D printing and robotics. Dedicated to delivering high-quality designs and solutions. Ready to collaborate an... Read more

Final year mechatronics student and passionate CAD designer with knowledge and interest in 3D printing and robotics. Dedicated to delivering high-quality designs and solutions. Ready to collaborate and contribute innovative ideas to freelance opportunities.

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photosh... Read more

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photoshop PROJECTS Projects Handled in Hindustan Aeronautics Limited: “Design and Process Optimization of Tail Rotor Drive Shaft Assembly of Advance Light Helicopter (ALH) Transmission System”. Design and development of an American Chopper using SolidWorks, Skill Lync  Developed a professional mood board, ideation sketches and detailed presentation sketches of a American Chopper in Adobe Photoshop  Designed and assembled 13 sub-components such as Chain, Engine sub-assembly, Front & rear wheels, Chassis, Suspension fork, Gas tank, etc. in SolidWorks Pro  Rendered the fully assembled American Chopper withadded Environment, added decals, scenes and materials using PhotoView 360 & SolidWorks Visualize. Design of Sun seeker Predator Yacht, Skill Lync.  Setup the blueprint according to the predefined dimension.  Designed and assembled the yatch of various portions – Hull, Front seat, Garage door, Middle seat, Superstructure, Propeller, Radar mast in SolidWorks Pro  Used Photo View 360 & SolidWorks Visualize, rendered theyatch by apply colour, Materials, and entire value like gamma value & reflection, added camera spot light to view part realistic. Design of Inner and Outer panel of Hood using NX CAD, Skill Lync.  Designed the Hood inner panel as per EURONCAP regulation and considered pedestrian safety and passenger safety standards when frontal crash occur.  Provided Emboss to improve stiffnessand allow to force dissipated toward the side outward for the driver and frontal passenger safety.  Developed the necessary reinforcement and provided latch and striker, mastic data to avoid noise. Design of Backdoor, Skill Lync.  Designed the backdoor by two portion of inner and outer panel using NX CAD and Catia V5.  Designed the back door inner panel with outward stress flow by creating emboss and provided hemming to join inner and outer panel.  Developed the necessary reinforcement for gas stay, hinges, wiper motor and provided latch and striker. Design of Car Front Fender with wheel arc calculation, Skill Lync.  Designed front fender based on the design data with following portion such as drip area, Bumper mount area, Sill area, cowl and A-pillar region using NX CAD.  Ensured the drip area designed as per standard dimensions which is fitted inside the Engine compartment acts as major mounting region of fender.  Calculated the wheel arc clearance after design and ensured the design result matches the standard regulation criteria. Design of Car Roof using NX CAD, Skill Lync.  Calculated the bow roof position by studying the roof curvature dimension for heat distortion criteria and snowed criteria.  Ensured the heat distortion test and snowed test result passes as per standard.  Designed the front roof rail, rear roof rail, centre roof rail & centre bow roof rail, and with necessary reinforcement. Design of Casing and Box assembly, Skill Lync.  Designed the Enclosure, Metal Bracket, flattening and forming the sheet using NX CAD.  Used different method to design flange, bead, cut out and convert wizard from solid to sheet metal.  Used unbend and rebend to check whether the sheet metal generated properly. Value Engineering in Air tank and Distributed Drying Unit mounting System, Ashok Leyland Ltd, Chennai (2013)  Developed and modified of air tank and Dryer and Distribution Unit mounting system in Heavy Duty vehicles to full fill the pneumatic pressure properly.  After the modification, pressure reduction in Air tank and Dryer and Distribution Unit were reduced. Also the mounting stress can be analysed using Ansys and Solid works in the mounting bracket of Air tank and DDU System.

Hi, Greetings of the day! I'm a Mechanical Design Engineer having over 10 years of experience in product design and development by using SOLIDWORKS/AUTOCAD/CREO across multiple engineering sectors.... Read more

Hi, Greetings of the day! I'm a Mechanical Design Engineer having over 10 years of experience in product design and development by using SOLIDWORKS/AUTOCAD/CREO across multiple engineering sectors. Here are the services I provide: *2D Technical Drafter - Technical Drawing (Autocad/Solidworks) *CAD Modeler (Solid works) *3D Animation (Solid works) *3D Rendering(Solid works) *FEA (Solid works) *Customization (Solid works) *MS Office (Excel, Word, PPT) My expertise includes 3D modeling, 2D to 3D conversion, 3D Rendering, 3D Animations and 2D drawing conversion. I am highly proficient in CAD tools, particularly SOLIDWORKS/AUTOCAD/CREO. I have worked with various global industries. "I have strong experience in delivering high-quality work within deadlines". "My work policy is simple: No compromise on Quality." Feel free to reach out to me. I’d be happy to discuss your project and help enhance it to meet your needs. Place your order Now!

My first price award winning cad master Competition in government engineering college. My BE Final year project is automated guided vehicle. this robot. i Arduino board, Arduino programming, sheet m... Read more

My first price award winning cad master Competition in government engineering college. My BE Final year project is automated guided vehicle. this robot. i Arduino board, Arduino programming, sheet metal design, Cad design using creo and many more sensors are used like IR sensor etc. My education - B.E - Mechanical Engineering in First Class at 2018 my Family is very poor. but my design idea and innovation is rich.

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. *... Read more

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. * 3D mechanical designing and detailing.

I am a skilled Tool Designer specializing in Jigs, Fixtures, and 2D & 3D CAD Modeling with expertise in AutoCAD, SolidWorks, Fusion 360, and Creo. With a Bachelor’s degree in Automobile Engineering, I... Read more

I am a skilled Tool Designer specializing in Jigs, Fixtures, and 2D & 3D CAD Modeling with expertise in AutoCAD, SolidWorks, Fusion 360, and Creo. With a Bachelor’s degree in Automobile Engineering, I have experience in concept development, technical drafting, and Standard Work Instructions (SWI). I have worked on precision tooling solutions for automotive, aerospace, and manufacturing industries, ensuring high-quality and production-ready designs. Whether it's converting 2D drawings to 3D models, creating complex assemblies, or optimizing designs for manufacturing, I deliver efficient and accurate solutions. Let’s collaborate on your next project!

I am a Mechatronics Engineering student with great interest and passion for 3D modeling. I have been practicing 3D design for the past 1 year. For 3D models, I use the Siemens NX CAD software and for... Read more

I am a Mechatronics Engineering student with great interest and passion for 3D modeling. I have been practicing 3D design for the past 1 year. For 3D models, I use the Siemens NX CAD software and for 2D designing and drafting I use the AutoCAD software.

Hi, I have graduated at Hindustan institute of technology and science.B.Tech degree Mechanical Engineering Course.I have a knowledge in CAD modelling and Mechanical Engineering.

Hi, I have graduated at Hindustan institute of technology and science.B.Tech degree Mechanical Engineering Course.I have a knowledge in CAD modelling and Mechanical Engineering.

Having 6 years of experience in manufacture industries as a Machine designer. Having high depth knowledge in Automation machine and special purpose machines

Having 6 years of experience in manufacture industries as a Machine designer. Having high depth knowledge in Automation machine and special purpose machines

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in... Read more

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in New product Design & development and I developed the some new type of products. also I am doing Research & development on same I design product Related to automobiles, domestics, electronics etc. , also I am Well in Reverse engineering of product I can Reproduce and Re-design of any product & Design CADD model with help of STL(point cloud),I have good knowledge of working on Sheet metal& plastics products with manufacturing standards, have well experience and good knowledge of manufacturing process of product while designing of product with the account of DFM, DFA, DFSS,DFX, along with analysis, have a good knowledge of tooling & fixtures for for product& welding knowledge for fabrication and sheet metal parts and manufacturing knowledge of plastics products, I well in Quality standards like GD&T and Tolerance and stock up analysis, APQP, good in material selections & cost and Weight reduction , bench marking of product, what I designed product make our company profit trending in market, I am working in automobiles(BIW) ,exhaust System of engine , mufflers, and I awarded as Best Designer in my Company &college .I designed one Eco friendly product Reduce pollution in environment because these I recognize and awarded for that, I have patents on Digital silencer, i worked in Vehicle Design, Vehicle Body Design (Interior& exterior) CAR, commercial & passenger vehicle Design. I proficient in CADD software like, CATIA, SOLID WORKS, UNIGRAPHICS NX-12, AUTO CADD, for Reverse engineering DESIGN-X, Geomagic Qualify& Studio , I provide a freelancer services to other in Design & CADD and Tie up with 10+ organization,

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert an... Read more

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert and if you need services like mentioned above, I'll be right choice for you. I can design different mechanical parts, fixtures and instruments in Autocad. Services: I am offering • 2d drawings • CAD 3d modeling. • isometric 2d CAD drawings • 3d product designing. • mechanical parts designs. • high realistic rendering. I will provide dwg, dxf, jpg, png, pdf file formats. Why choose me: • 100% money back guarantee. • I will provide fast delivery service.

CAD Designer : I know Autodesk Inventor, Auto-CAD, Plant3D and Solid Works. I can do 3D Modelling, 3D CAD Layout, 2D fabrication detail drawings, point cloud to 3D CAD and P&ID/PFD redline markup upda... Read more

CAD Designer : I know Autodesk Inventor, Auto-CAD, Plant3D and Solid Works. I can do 3D Modelling, 3D CAD Layout, 2D fabrication detail drawings, point cloud to 3D CAD and P&ID/PFD redline markup updates. I did several projects for Water treatment plants, Flour mills, power plants. INTERIOR Designer : Space Planning, Color Schemes, Materials, Furniture and Decor ideas. I dis several designs for home interior, furniture and wood works on special needs.

Mechanical Design Engineer with 20 Years of career experience in providing cost effective solutions to wide range of Projects and Automation systems. Possess extensive practical experience utilizing 2... Read more

Mechanical Design Engineer with 20 Years of career experience in providing cost effective solutions to wide range of Projects and Automation systems. Possess extensive practical experience utilizing 2D and 3D cad modeling applications to visualize design specifications. 1. Machine concept, Requirement, Sequence & Cycle time estimation. 2. Analyzing of customer drawings and specifications and understanding of application and function of the components. 3. Preparation of Layout and Part drawing in 3D & 2D modeling. 4. Discussion and co ordination with customers for approval. 5. Making manufacturing drawing for machining and process chart & BOM. 6. Trial run, Proving and support for installation of machine. Projects for M/s. Wheels India Ltd., 1. Butt Welder Machine 2. Flash Trimmer Machine. 3. MIG welding Machine. 4. Wheel Run-out Testing Machine. 5. Wheel transfer Automation systems. 6. Tack Welding Machine (for CV Wheels). 7. Gantry Handling system (Aluminium wheels) 8. Strip Feeding system. 9. Cut-mark Polishing Machine. 10. Wheel Joint Leak testing Machine. 11. Rim Coiler machine. 12. 8 spindle circular Drilling machine. Projects for M/s. TVS Motor Company Ltd., Hosur. 1. Frame Rectification Machine. (U69, U289, N11, Jupiter, K06, Zest) 2. Frame Welding fixtures. 3. Welding Line Conveyor system. Projects for M/s Bosch Pvt. Ltd., 1. Tandem Master Cylinder Assembly & Testing Machine. 2. Tandem Piston Assembly Machine. 3. Reservoir Assembly Machine. 4. Oil Filter Leak Testing Rig. 5. Turbo Charger Casing testing Machine. 6. Booster crimping Machine. 7. 2 Ton & 5 Ton Servo Press. 8. Servo Manifold Flaring Machine. 9. Glow plug machine. 10. Radius Milling machine. Projects for M/s ITC. Ltd., 1. Tobacco Feeding Belt Conveyor. 2. Chilli powder Screw Conveyor. 3. 1 Ton spice blender mixer.

I'm skilled in Autodesk Inventor and have been using it for the past 3 years. I'm also highly enthusiastic to learn a lot more in Inventor, SolidWorks, Fusion360, etc. as I have worked with them.

I'm skilled in Autodesk Inventor and have been using it for the past 3 years. I'm also highly enthusiastic to learn a lot more in Inventor, SolidWorks, Fusion360, etc. as I have worked with them.