Plant Layout & Piping Design Engineer Ashraf Waly 16 Ismail Ramzy, El-Gamea square, Heliopolis, Cairo, Egypt Floor 5, Flat 1  OBJECTIVE: To obtain a position within a large dynamic company wh... Read more

Plant Layout & Piping Design Engineer Ashraf Waly 16 Ismail Ramzy, El-Gamea square, Heliopolis, Cairo, Egypt Floor 5, Flat 1  OBJECTIVE: To obtain a position within a large dynamic company where there are opportunities for growth and development. CAREER PROFILE: § Excellent interpersonal skills with an ability to work effectively with individuals at all levels. § Soft skills: Strong team work attitude and ability to motivate the team members, significant communication skills, problem solving attitude, fast and multi-task execution capabilities, strong analytical mind set and imaginative problem solving ability. PROFESSIONAL EXPERIENCE: PGESCo, Power Generation Engineering Service Company Consultant BECHTEL Partner Title : Senior Plant Design Engineer • Professional knowledge: clear and solid knowledge of all the plant design, piping engineering related activities & Interaction with Process Licensor including review of P&IDs & Preparation of Piping Design Basis. General Layout (Site Plan) & Piping Design Criteria Equipment Layout Plan (Unit Plot Plan) Piping Assembly Drawings Key Plan , U/G Piping Composite dwg.(s) Piping routing studies & Underground system routing Piping & Instrumentation Diagrams (P&IDs) , Line List Piping Specifications (e.g. supply, material, dimensional, fabrication, erection / installation, welding incl. equipment welding, testing, PMI, insulation) List of piping special components & Material take off (Bill of Material) Technical Bid Evaluation & vendor documentation for piping material 3D- Model , Piping isometric design and issue procedure Piping isometric list , drawing Pipe support specification ,summary & check . • Piping Material and Valve Material Specifications • 3-D Modeling and layout design. • Ensuring compliance with Procedures, Work-instructions and Check-lists • Arranging 3-D Model and checking dwg. And Isos • Equipment design (Tanks ,heat exchangers, Pumps, Compressors ………etc ) • Drafting composite drawings and extracting Isometrics. • Responsible Engineer for the Plant layout , Plant General Arrangement & Equipment Locations ) • Check and review Project /vendor, Contractors drawings. • Issue of Design Change Requests/Notes and Man-hour Change Orders • Site interface and support/co-ordination • Standardization (e.g. Updating of Specifications, Technical Notes) • Responsible Engineer of (waste/water treatment & desalination water) packages. • Coordination with other disciplines (Electrical, Civil, Archtiecture, Control,etc) • Coordination with Site Construction Managers/Other Responsible Engineers. Since May 2008 to Nov.2012 • Project shared in : EL-TEBBIN Power plant 2*350MW ,ABOU-QIR Power plant 2*650 MW,EL-SOKHNA “Super Critical” Power Plant 2*650 MW , El-Suez power plant 650 MW ARAB CONTRACTORS CAMEROON LTD YAOUNDI –OLAMA (ROAD CONS. PROJECT), CAMEROON Since 2007 to 2008 §Site & Tech.office Manager of (Asphalt Mixing /Concrete) Plants and Asphalt equipment &Spray bitumen tanks trucks, compactors, .etc). (Cameroon-Yaoundé 2008) §Controller and Tech.operator for all kinds of asphalt /Concrete plants ARAB CONTRACTORS “OSMAN AHMED OSMAN” Transportation projects sector (Roads and railway projects), Cairo Since 2003 to 2007 §Maintenance, Repair and Designer engineer for all No. of eleven ASPHALT MIXING PLANT. (Cairo 2003) §Manager of asphalt pavement sector. (2004) §Manager for all No. of elevens ASPHALT MIXING PLANT. (2005-2007) §Visitor lecturer in (MTI-MANAGEMENT &TECHNOLOGY INSTITUTE) (2005-2007) Sugar Industrial Integrated Co., Hawamdeya, Cairo 2002-2003 Associate Industrial and designer engineer §Learning a full description of the sugar industry techniques. § Completed studies and validations on all stations in the factory started at milling and ended at packing stations and the control stations. § Completed studies and validations on all equipment used on the production floor. § Completed studies on the processes and instrumentations diagram (P&ID) of the factory. § Dealing with the factory’s software packages which used in the design and the analysis of the piping, structure and equipment. §Learning the creation of change requests required to amend standard operating procedures. § Conducted trouble-shooting investigations prior to the start up of new production lines. §3-D Modeling and stress analysis calc. § Provided general support to the B.Sc. Project. Army Factory 909 of Engines, Helwan, Cairo Training & work 2000-2002 Engineering Assistant (Summer Placement) § Assisted with the creation of Auto-CAD drawings. § Completed evaluation forms on CNC machines as detailed by the Senior Engineers § Filed and typed up engineering data. § Devised layout drawings on Auto-CAD for the review of the Senior Engineer. § Completed studies and validations on all equipment used on the production floor. § Provided Engineering support for each production area. § Provided general support to the department. EDUCATION: Cairo University, Cairo, Egypt July 2003. BSc. in Machine design and production. Excellent degree in B.Sc. project. Headway University, California, USA, April 2012 MSc.in Mechanical Science Engineering ASME Professional member SPED Professional member PROJECT HISTORY: Project name is “Computer aided design for an industrial piping network “. The goal of my project to give a complete modeling of an evaporation station used in sugar industry techniques and to perform stress analysis on the main pipelines feeding the evaporators. From the main objectives of the project is studying the various types and features of pipe fittings and its accessories including materials, codes, design conditions, design rating and pressure &temperatures rating. Software packages used in project: • AUTOPLANT packages (STEEL_STRUCTURAL, EQUIPMENT, and PIPING). • AUTOPLANT (P&ID) PACKAGE • AUTOPIPE PLUS (stress analysis) package. • COSMOS/M package(finite element analysis) • AUTOCAD 2000 package. ADDITIONAL INFORMATION & Skills: Proficient in the use of: • Autodesk Autocad (2D-3D)2000-2002-2004 • Bentley AutoPlant 3D (STEEL_STRUCTURAL, EQUIPMENT, PIPING). • AUTOPLANT (P&ID), Material Database. • AUTOPIPE PLUS(stress analysis) • COSMOS/M package(finite element analysis) • Smart Plant 3D “Intergraph Package” • Smart Sketch 3D “Intergraph Package” • Inventor 8 ,11 • Microstation/J • 3DM “BECHTEL confidencial programe package” • Pipeflow programe package • Mechanical desktop • 3DMAX CAD 09 • Intelligent CAD 2001 • Visual basic • Microsoft Word, Excel, PowerPoint, Photoshop • Courses completed through study include Thermodynamics, Machine Design, Heat Transfer, quality control, management, CNC programming, Plant engineering, metal forming…..etc. • Familiar & Courses attended (ASME B31.1,B31.3 …etc) and ANSI ,NFPA ,API ,AWWA,OSHA,Valves Selection…………etc codes ,Specifications and standards • Many Seminars/Conferences were be attended in/out work field • Good knowledge in Electric /Control. • Languages: Fluency in spoken & written English. PERSONAL DETAILS: Date of birthday: 12 February 1980 Religion: Muslim Marital status : Married and have a Son. Military service: done Drive license: Valid INTERESTS: Football, Reading, Travel, Internet.

i have a strong expertise in furniture and decoration design, utilizing advanced software such as 3DS Max for 3D modeling, ArtCAM for artistic and CNC machining designs, and PowerMill for CNC programm... Read more

i have a strong expertise in furniture and decoration design, utilizing advanced software such as 3DS Max for 3D modeling, ArtCAM for artistic and CNC machining designs, and PowerMill for CNC programming and machining. This combination of skills allows you to create intricate and precise designs for furniture and decorative items, with a focus on both aesthetic appeal and functional usability.

We are an adaptable and innovative qualified Engineering team with over 9years experiences in developing new products and innovations and assisting through all development steps Sketching and gener... Read more

We are an adaptable and innovative qualified Engineering team with over 9years experiences in developing new products and innovations and assisting through all development steps Sketching and general calculations --> Conceptual design --> Detailed design (Mechanical & Electrical) --> Simulations (FEA, CFD, heat transfer, motion analysis, etc.) --> Shop drawings (2D, BOM, PCB schemes, CNC machines programs) --> Manufacture --> Assembly --> Programming --> Testing --> documentation --> upgrade. Our services DESIGN of 1- Machines 2- Products 3- PCBs Programming for 1- PLC 2- SCADA & DCs Systems 3- Arduino 4- Microcontroller 5- MatLab MANUFACTURE by 1- CNC machines (Laser cut, milling, turning, etc...) 2- 3D printing 3- PCB soldering FREE SERVICE 1- CONSULTING IN ANY STEPS OF THE PRODUCT DEVELOPMENT CYCLE I am Ahmed, the contact person, kindly contact me anytime :) Also, you can see work samples here

Mechanical design engineer, interested in CAD, CAM and CAE. I'm also new learner of programming with C and MATLAB. My favorite interest is in CFD and industrial design, from concept to a final manufac... Read more

Mechanical design engineer, interested in CAD, CAM and CAE. I'm also new learner of programming with C and MATLAB. My favorite interest is in CFD and industrial design, from concept to a final manufactured Product.

Designs tools, dies, and special guiding and holding devices that enable machines to produce a variety of products the Owen uses daily.  Designs metal molds for die casting and for molding plastics.... Read more

Designs tools, dies, and special guiding and holding devices that enable machines to produce a variety of products the Owen uses daily.  Designs metal molds for die casting and for molding plastics.  Designs prototypes of parts, and then, working with engineers and designers, determines how best to manufacture the part.  Repairs worn or damaged tools, dies, gauges, jigs, and fixtures.  Programming and Setting for CNC Milling Centers, CNC Turning and Wire-Cut EDM. Computer Skills  Windows, Ms. Office, Internet skills  Computer-Aided Design (CAD) Programs Unigraphics(NX), SolidWorks(Stress analysis): Excellent Matlab, Inventor, Catia: Very Good AutoCAD Mechanical: Very Good  Computer-Aided Manufacturing (CAM) Programs Delcam PowerMill: Very Good Unigraphics (NX) (Milling-Turning-EDM): Very Good Delcam for SolidWorks (Milling-Turning-EDM): Excellent Language Skills  Arabic: Mother Language.  English: Very Good (reading, writing & speaking). Additional Information  Certification in MINI-MBA at ASG (Ahram Security Group).  Lean Manufacturing Mini-Course at ASG.  SMED at ASG.  Certification in Communication skills at Zedny (Human Development Division).  Certification in planning at Zedny (Human Development Division).  Certification in recognition of successfully completing The General English Course, Pre-Intermediate Stage, Level 10 at America-Mideast Educational and Training Services, Inc. (AMIDEAST).  I have a current, clean Driving License.

Engineer with more than 8 years total experience as production and design engineer, right now i work as a design engineer in office furniture company. I use Solidworks and Autocad in my job and i am... Read more

Engineer with more than 8 years total experience as production and design engineer, right now i work as a design engineer in office furniture company. I use Solidworks and Autocad in my job and i am Expert using them. I also familiar with other software.

I’m an Embedded Hardware Engineer with strong expertise in PCB design and embedded systems development. I design production-ready PCBs using Altium Designer and develop embedded software. Over the yea... Read more

I’m an Embedded Hardware Engineer with strong expertise in PCB design and embedded systems development. I design production-ready PCBs using Altium Designer and develop embedded software. Over the years, I’ve worked on projects such as: - 6-layer BLDC Motor Inverter PCB with CAN communication - Auto-Ranging Multimeter (hardware + firmware) - Custom Development Boards (ESP32-S3, TM4C123GXL, RP2040) My services cover PCB Design, Embedded Systems Programming (AVR, ARM Cortex-M, ESP32) I’m passionate about creating innovative and efficient hardware solutions that bring ideas to life.

Experienced BIM Architect specializing in luxury interiors, space planning, and project management, passionately transforming concepts into inspiring spaces. I hold a Bachelor's degree in Architectur... Read more

Experienced BIM Architect specializing in luxury interiors, space planning, and project management, passionately transforming concepts into inspiring spaces. I hold a Bachelor's degree in Architectural Engineering and possess a robust skill set in BIM, AutoCAD, and site engineering. I am Autodesk Certified in a comprehensive range of BIM tools, including: + 3D Coordination and Clash Detection using Navisworks + Advanced Quantification using Revit + Architecture 3D BIM Modeling Essentials using Revit + BIM Project Design Review using Navisworks + BIM Project Visual Sequencing and Cost Estimating (4D and 5D Simulation) + Preparing Project Content Library using Revit Families + Worksharing and Project Collaboration using Revit My expertise extends to visual programming using Dynamo. My professional background as a technical site architect and QA/QC architect has equipped me with strong site execution and quality assurance skills, ensuring projects meet the highest standards. I am adept at reviewing and approving designs, plans, and specifications, ensuring construction aligns with approved drawings and industry standards, and collaborating with project managers, engineers, and contractors to maintain workflow efficiency. I also have a proven track record in identifying risks, troubleshooting design inconsistencies, and resolving construction-related conflicts.

Design prosthetics for pets. including CAD design, material selection, manufacturing, Testing, Quality and Maintenance. Mechatronics Engineer with extensive experience in industrial automation and con... Read more

Design prosthetics for pets. including CAD design, material selection, manufacturing, Testing, Quality and Maintenance. Mechatronics Engineer with extensive experience in industrial automation and control systems. I specialize in programming and troubleshooting PLCs, including Delta, Siemens, Schneider, Allen Bradly and Yaskawa.

I’m a Mechanical Engineering student majoring in Automotive Engineering at GIU. Skilled in CAD design, programming, and control systems, with hands-on experience in projects such as a Solar Panel Clea... Read more

I’m a Mechanical Engineering student majoring in Automotive Engineering at GIU. Skilled in CAD design, programming, and control systems, with hands-on experience in projects such as a Solar Panel Cleaning Robot and an RC Car with obstacle avoidance. I bring strong problem-solving, teamwork, and adaptability skills to engineering challenges.

i'm an electrical engineering student loves engineering & science

i'm an electrical engineering student loves engineering & science

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and contr... Read more

I enjoy binding different branches of engineering together, so that's why I chose to be Mechatronics and control engineer. In Mechatronics, you play with electronics, mechanics, programming, and control theory to make superb applications and products. The name of the game is successful integration between different domains, which is a missing skill searched by many engineers, and needed by many Start-ups. I am new here, but I have finished more than 60 freelancing tasks and missions in other sites. I have used PIC microcontroller and Arduino to implement so many projects, and I have even used them to make commercial products. I have the talent of integrating embedded systems with electronics and GUI interface to make a complete application. I used microcontrollers in applications like: Sensors Interfacing (GPS-Motion-Encoder-Light-Temperature-Level-Pressure-Vibration-Position) - CNC machine control - Proportional and on/off temperature controllers - Level controller - Power metering IC interfacing (Experience with ADE7953) - Wifi & IoT - GSM - SD card interfacing. Moreover, I have experinece in making integrated system between Raspberry pi and Arduino for applications that need so. Moreover, I have made many projects that involve signal electronics, power electronics, sensors and measuring systems, and signal conditioning. In addition, I and my team can give you support if you want a PCB design and soldering for your circuit. Regarding control and automation, I am finished master study in automatic control theory, and I have experience in designing embedded controllers - automatic control theory and applications - adaptive control - autotuners - system modeling & simulation- system Identification and parameters estimation - system dynamic response analysis - pole placement controllers - PID controllers - Scilab & Matlab software packages . In addition, I can give you support in PLC systems and ladder diagram programs for controlling industrial processes. In addition, I am using Java as GUI interface for my applications, so I have experience in how to make a java GUI program and to control an embedded system using it. I made several projects where I used Java to monitor sensor values, or to send control commands to electronic circuits. ِAlso I have worked before with Java libraries that serve scientific applications, like EJML matrix algebra library, JArduino (java for arduino) library, JFreeChart plotting library, ImageJ image processing libary, RXTX serial communication library, etc...

Motivated Mechatronics Engineering student with hands-on internship experience in mechanical, electrical, and electromechanical systems. Skilled in SolidWorks, AutoCAD, MATLAB, C++, and PLC programmin... Read more

Motivated Mechatronics Engineering student with hands-on internship experience in mechanical, electrical, and electromechanical systems. Skilled in SolidWorks, AutoCAD, MATLAB, C++, and PLC programming. I’ve trained with top companies like Archirodon and Orascom Construction, where I gained practical experience in HVAC, power systems, and CNC machines. Known for strong problem-solving, teamwork, and communication skills. Trilingual (Arabic, English, French) with a passion for innovation and continuous learning.

Hello, I'm structural engineer graduated from Faculty of Engineering Cairo University in Egypt in 2017.I'm very powerful at structural engineering: *My GPA is 3.50 (Equivalent to Dist... Read more

Hello, I'm structural engineer graduated from Faculty of Engineering Cairo University in Egypt in 2017.I'm very powerful at structural engineering: *My GPA is 3.50 (Equivalent to Distinction grade with honour) *My rank among my colleagues is 17th (Out of hundreds of graduating engineers) *Currently doing my MSc at Faculty of Engineering Cairo University. *I work as a part-time teaching assistant in Faculty of Engineering Suez University *My Skills: -Structural Design using AISC,ACI,ECP or any other appropriate local codes. -Programming using Matlab -Education and Tutoring using online lecturing videoes and brief PDF conclusions about the subject. *Programs mastered: -AutoCAD -SAP2000 -ETABS -SAFE -Fusion 360 -Revit Structure -Matlab

(1) Bachelor's degree in Mechanical Engineering, specializing in Manufacturing Engineering and Production Technology.GPA = 3.425 (85.56%). (2) Engineering programs: SolidWorks, CAMWorks, AutoCAD, ArtC... Read more

(1) Bachelor's degree in Mechanical Engineering, specializing in Manufacturing Engineering and Production Technology.GPA = 3.425 (85.56%). (2) Engineering programs: SolidWorks, CAMWorks, AutoCAD, ArtCAM, SketchUp, MATLAB, Minitab, Arena, Microsoft Office, and Production Operations Management “POM”. (3) Certifications: 1. Discover and upgrade your skills. 2. Microsoft Excel Certifications. 3. Microsoft PowerPoint Certifications. 4. Microsoft Word Certifications. 5. Office 365 Certifications. 6. Introduction to Minitab. 7. Practical Steps For Time Management. 8. Prepare to study and live in the UK. 9. Introduction to Project Management. 10. Welding technology and inspection training. 11. Teamwork. 12. Maintenance and Mechanical Course. (4) Personal Skills: Leadership, Active listening, Decision making, Time management, Teamwork, Creativity, Attention to Detail, Collaboration, Problem-solving, and Communication. (5) Engineering Skills:  Assembly Line  Electricity  Process Improvement  Troubleshooting  Computer-Aided Design  Lean Manufacturing  Project Management  Six Sigma  Analysis  MS Office  Root Cause Analysis  Production Operations Management “POM”  Quality Control and Quality Management  Materials Engineering  Hydraulic power systems  Engineering Design, Machine Design, and Product Design.  Foundry Technology  Engineering Metrology  Metal Joining Processes  Risk Management  Computer-Aided Design “CAD”  CNC Machines Programming  Computer Aided Manufacturing “CAM”  Modeling & Simulation  Repair of mechanical machines