CAPABILITIES • Ideation • Concept Development • Facility layout initiation and co-ordination. • Client liaison for the purpose of collaborative design. • Design optimisation to incorporate value-addin... Read more

CAPABILITIES • Ideation • Concept Development • Facility layout initiation and co-ordination. • Client liaison for the purpose of collaborative design. • Design optimisation to incorporate value-adding criteria. • Application of mining and heavy industry experience. • Contribution of mining experience both underground and open cut operations including infrastructure and processing plants. • Experience with preparation of tender submissions, technical and financial evaluations. • Technical writing including operations and maintenance manuals, spare parts inventory and stores management systems equipment data sheets, technical specifications and design criteria. • Preparation of studies, reports and technical documents. • Management, project engineering, administration, procurement, planning and scheduling.

I have contracted my services in Australia (Brisbane since 1990) I have worked with cad and computers in general since 1986 I have a lot of experience to offer I have a conscientious work ethic I... Read more

I have contracted my services in Australia (Brisbane since 1990) I have worked with cad and computers in general since 1986 I have a lot of experience to offer I have a conscientious work ethic I have the right hardware to suit the inventor software

I have had exposure to a wide range of design fields, e.g. from mining to structural. My skill set and passion is in 3D modelling, reverse engineering and conducting design validations to them. Some... Read more

I have had exposure to a wide range of design fields, e.g. from mining to structural. My skill set and passion is in 3D modelling, reverse engineering and conducting design validations to them. Some of my accomplishments include: 1) Designing, validating and bringing to life one of the largest "Motorbases" for one of the companies I worked for 2) Working within a regulated mining industry (particularly with Underground mining regulations) to help incorporate fiber optics through high voltage couplers 3) Assisting startups to translate their sketches into 3D models for their investment pitch

Dominic Spooner is an industrial designer and founder of Ember Design House. Dominic has over ten years’ experience in the design and manufacture of products for military, commercial and consumer indu... Read more

Dominic Spooner is an industrial designer and founder of Ember Design House. Dominic has over ten years’ experience in the design and manufacture of products for military, commercial and consumer industries. Dominic commenced his career designing satellites. He designed and managed the development of a satellite for use in disaster response; a world first in satellite design and application. From designing satellites he moved to the design and mass manufacture of consumer products ranging from electronics and wearables to electric vehicles and energy storage. Dominic traveled extensively to Asia to manage the successful manufacture of products and today maintains a network of prototyping and manufacturing suppliers in China and Taiwan. Since starting Ember Design House Dominic has contributed to design projects for Flex (formally Flextronics), Sony, Dyson, LifeProof, Ottobox, and Husqvarna. Dominic is also a co-founder of Battery Corp., developing innovative battery technology solutions.

I am a Mechanical Engineer with over 10 years 3D modelling experience in Fusion 360, Solidworks, and various Autodesk Parametric Modelling. MATLAB and Simulink. Ansys CFX Fluid Dynamics and Static Str... Read more

I am a Mechanical Engineer with over 10 years 3D modelling experience in Fusion 360, Solidworks, and various Autodesk Parametric Modelling. MATLAB and Simulink. Ansys CFX Fluid Dynamics and Static Stress Simulations. Experience with Additive (3D Printing) and Subtractive (CAM) manufacturing. Providing the best possible Design Engineering solutions based on sound CAD design, 3D Modelling practices. I believe my portfolio work speaks for itself. Strategy. - Custom design and testing. - Design optimisation based on your requirements. - Will provide a full output of CAD Files (STP, F3D, STL), including Photoshop optimised Renders, Drawings in PDF if required.

I am an Interior Architect, Indian origin based out of Brisbane, Australia. I have 8 years plus experience in working and leading design and execution teams From Inception to completion stage of the... Read more

I am an Interior Architect, Indian origin based out of Brisbane, Australia. I have 8 years plus experience in working and leading design and execution teams From Inception to completion stage of the project. I have an excellent track record working for high magnitude projects, from Residential, commercial, workspace to hospitality and healthcare Projects, Where I have collaborated with renowned award-winning Architects and designers. I have more than 5 years of design management experience in the industry. In my last position as a Senior Design Manager, I was responsible for leading design teams, preparing contextual but unique design proposals with optimum space functionality. Preparing Space planning, furniture layouts, Construction Drawings, 3D models and details are my standpoints. I have great exposure in sourcing furniture, lighting, décor, and other interior design materials from local and the world market to create an outstanding mood for the interiors. I am very good at articulating design proposals, and with great clarity pitching them to the internal teams and to the clients. I am extremely passionate about design, art, and architecture and that shows in my work approach.

As a professional and experienced Design Draftsman, I can deliver quality work. I am highly focused, known for my accuracy, attention to detail and timelines in managing tasks given to me. I have a go... Read more

As a professional and experienced Design Draftsman, I can deliver quality work. I am highly focused, known for my accuracy, attention to detail and timelines in managing tasks given to me. I have a good attitude towards processes and procedures, a professional attitude, and firm personality to work autonomously or as a team member. I have excellent interpersonal skills that allow me to develop and support effective working relationships with people at all levels. In addition to that, I enjoy working collaboratively with other team members to deliver on key priorities within set timeframes. My goal is to secure a position which will permit me to apply my skills and other related knowledge I have acquired during my professional experience that will broaden my knowledge and facilitate my growth. Skills: o Modelling general engineering structures, piping assemblies, industrial equipment as per project specifications and standards o Preparing models and GA for client review and updating changes in the model. o Creating 3d models including Structural steel works, Weldments & Sheet metal, o Preparing Concept drawings, GA layouts, Fabrication drawings, DXF’s, and As Built o Site inspections and mark up sketches, designs and layouts with specifications and measurements o Geometric Dimensioning and Tolerancing in Technical Drawings o Top down design modelling, layout sketches and configurations o Welding and heat treatment processes of steels. Familiar with different grades of steels o Trade background as precision machinist / Tool maker. Familiar with various manufacturing process o Proficient in the use of Microsoft Word, Excel, PowerPoint, Outlook.

I’m a senior designer focused on marine and automotive product development, combining A-Class surfacing with high-end photoreal marketing visualization. My core toolset is Siemens NX 2212, where I bui... Read more

I’m a senior designer focused on marine and automotive product development, combining A-Class surfacing with high-end photoreal marketing visualization. My core toolset is Siemens NX 2212, where I build stable, production-grade models with disciplined datum strategy, clean parent/child control, and parameterisation designed for iteration. Over the last 7 years with Maritimo Yachts, I’ve owned exterior styling and 3D development across multiple vessel programs—supporting the full pipeline from concept refinement to manufacturing-ready geometry, and delivering launch-quality visuals for marketing and sales. Key capabilities: • A-Class surfacing (curvature continuity, highlight control, manufacturable surface logic) • Parametric CAD (expressions, configurations, repeatable variant generation) • Marine + automotive experience (OEM + aftermarket; packaging, fitment, constraints) • Photoreal rendering (exterior/interior, materials/lighting, studio + environment scenes) If you need clean CAD, fast iteration, and visuals that elevate brand perception, I can step in immediately. Share your inputs (CAD format, references, target outputs), and I’ll propose a clear scope, timeline, and quote. If you tell me which tone you want (more “friendly and approachable” vs “premium and technical”), I’ll lock in one version and tailor it to your exact services/pricing style.

I’m a skilled and versatile freelance CAD designer with extensive experience in delivering high-quality 2D and 3D design solutions for a wide range of industries, including architecture, engineering,... Read more

I’m a skilled and versatile freelance CAD designer with extensive experience in delivering high-quality 2D and 3D design solutions for a wide range of industries, including architecture, engineering, product design, and manufacturing. With proficiency in industry-leading CAD software like AutoCAD, Inventor and Fusion 360. I transform concepts and ideas into precise, detailed, and functional designs. Whether you’re looking to create intricate technical drawings, product prototypes, or construction plans, I’m here to help bring your vision to life. I specialize in tailoring designs to meet your specific needs, ensuring optimal functionality, cost-effectiveness, and manufacturability. My process involves clear communication and collaboration throughout each project phase, from initial concept sketches to the final design. I’m dedicated to delivering efficient, error-free solutions on time and within budget. As a freelancer, I offer flexibility, quick turnaround times, and personalized service to ensure that your project aligns perfectly with your goals. Key Skills: 2D & 3D CAD Design & Drafting Product Design & Prototyping Architectural & Engineering Plans Technical Specifications & Documentation Manufacturing & Assembly Drawings Material & Process Optimization Attention to Detail & Problem Solving Fast Turnaround & Flexible Availability

I am looking forward to being hired by you for all your Mechanical FEA and 3D Design jobs. Having experience in FEA mechanical ANSYS and SolidWorks (static, dynamics and heat transfer), I am ready to... Read more

I am looking forward to being hired by you for all your Mechanical FEA and 3D Design jobs. Having experience in FEA mechanical ANSYS and SolidWorks (static, dynamics and heat transfer), I am ready to start working on your projects. I have almost 20 years of experience in turnkey solutions, expanding from the design offices, production lines, factories and construction sites. I have 10 years of experience in the steelwork industry. I can identify and improve design solutions that meet all the expectations regarding DFM, DFA, and product lifecycle, after years of experience in various sectors. In the last 5 years, I graduated with a Master's in Mechanical Engineering (Major Mechanical) at Queensland University of Technology (QUT), Brisbane, Australia and have been working in R&D offices for cutting-edge companies.

I am an Electrical Engineer with professional experience in Australia, specialising in HV power systems design, ETAP power system studies, and AutoCAD electrical drafting. I have supported Australian... Read more

I am an Electrical Engineer with professional experience in Australia, specialising in HV power systems design, ETAP power system studies, and AutoCAD electrical drafting. I have supported Australian EPC contractors, consultants, and industrial facilities with compliant, practical electrical designs across industrial and infrastructure projects. My experience includes load flow, short-circuit, arc flash, and protection coordination studies using ETAP, as well as detailed single-line diagrams, substation layouts, and equipment drawings developed in AutoCAD. I have worked with Australian HV/MV networks, transformers, switchgear, generators, motors, and protection systems in line with local utility and site requirements. I am familiar with Australian Standards and practices, including AS/NZS 3000, AS 2067, and relevant IEC/IEEE standards commonly applied on Australian projects. My work focuses on delivering clear documentation, accurate calculations, and designs suitable for construction, review, and approval within the Australian regulatory environment. I take a practical approach to engineering, ensuring designs are buildable, well-coordinated, and aligned with safety and compliance expectations. I am comfortable supporting projects from concept and feasibility through to detailed design and technical reporting. 🔧 Core Skills ETAP: Load Flow, Short Circuit, Arc Flash, Protection Coordination HV & MV Systems: Substations, Transformers, Switchgear Electrical Machines: Motors, Generators, Starting & Protection AutoCAD / AutoCAD Electrical: SLDs, GA Drawings, Layouts Standards: AS/NZS 3000, AS 2067, IEC, IEEE I am available for project-based and part-time freelance work, supporting both Australian and international clients who require experience with Australian electrical standards and HV systems

As an Australia based Civil Engineering Designer, I possess over a decade of professional experience in the civil engineering industry. Throughout my career, I have been engaged in diverse multi-disci... Read more

As an Australia based Civil Engineering Designer, I possess over a decade of professional experience in the civil engineering industry. Throughout my career, I have been engaged in diverse multi-disciplinary environments encompassing various domains, including water and sanitation, roads and stormwater, residential, commercial and industrial developments, as well as the construction industry. My proficiency in both local and interstate civil services and roads design has been honed through extensive involvement in an array of projects, which include but are not limited to, subdivisions design, geometric design, and bulk earthworks design. My expertise in engineering software programs spans a broad spectrum, encompassing 12d Model, Civil3D, AutoCAD, Caddie 18, Model/ Pipe/ Road Maker, and Autodesk extensions such as Infraworks and Vehicle Tracking.

I’m a mechanical engineering designer with hands-on experience in CAD design, including motorsport and mechanical systems. I specialize in creating accurate, manufacturable models for real-world appli... Read more

I’m a mechanical engineering designer with hands-on experience in CAD design, including motorsport and mechanical systems. I specialize in creating accurate, manufacturable models for real-world applications. My services include: – 3D CAD modelling – Mechanical part and assembly design – Engineering drawings for manufacturing – STL/STEP file creation and modification I focus on delivering clean, precise designs that are ready for production, whether for CNC machining, fabrication, or 3D printing. I’m reliable, responsive, and committed to delivering high-quality work on time.

As a building designer, my strengths encompass creativity, technical expertise, and attention to detail. With an imaginative mind, I conceive unique and innovative designs that make each building dist... Read more

As a building designer, my strengths encompass creativity, technical expertise, and attention to detail. With an imaginative mind, I conceive unique and innovative designs that make each building distinct. My proficiency in design software ensures precise and accurate representations of my visions. Meticulousness is my ally as I meticulously examine every facet of the design. Challenges are mere stepping stones, as my problem-solving skills pave the way to effective solutions. A client-centric approach drives me to comprehend their desires and incorporate them into my creations. Effective communication helps convey complex ideas to stakeholders. With passion, adaptability, and a touch of magic, I craft buildings that weave a tale of beauty and functionality.

I've been drafting for 10 years using Inventor and Autocad, as well I'm a qualified Boilermaker with 8 years experience. Currently i do Sub-contracting for the Drilling, Structural Steel and Mechanica... Read more

I've been drafting for 10 years using Inventor and Autocad, as well I'm a qualified Boilermaker with 8 years experience. Currently i do Sub-contracting for the Drilling, Structural Steel and Mechanical Engineering industries.

I hold a mechanical engineering degree from one of the prestigious university in Indonesia with high grade. I was previously pursuing a career as a mechanical draftsman in Weiss Tech Co. for one year... Read more

I hold a mechanical engineering degree from one of the prestigious university in Indonesia with high grade. I was previously pursuing a career as a mechanical draftsman in Weiss Tech Co. for one year and experienced all phases of a new industrial machine from conception to production stages. I have technical proficiency with several drafting methods such as 3D modelling and prototype model, mechanical and structural drafting, sheet metal design, 2D drafting, technical drawing/detail/ assembly / explode, static analysis simulation, 3D image render from 3D model, CAD conversion.

I have 4 years experience using Inventor for working assemblies, part drawings and exploded presentations.

I have 4 years experience using Inventor for working assemblies, part drawings and exploded presentations.

I’m Shaheer Adnan, an advanced mechatronics engineer with a strong focus on CAD design. With over 5 years of experience in designing mechanical systems, I specialize in creating precise, functional, a... Read more

I’m Shaheer Adnan, an advanced mechatronics engineer with a strong focus on CAD design. With over 5 years of experience in designing mechanical systems, I specialize in creating precise, functional, and innovative solutions using industry-standard CAD software. My expertise spans 3D modeling, product development, and system integration, with a keen eye for detail and efficiency. I’m passionate about bringing ideas to life through CAD and always strive to deliver high-quality work that meets client needs and exceeds expectations.

Expert in drafting detailed building services systems, including HVAC, lighting, electrical, fire protection, and hydraulics. Skilled in creating accurate technical drawings and converting existing do... Read more

Expert in drafting detailed building services systems, including HVAC, lighting, electrical, fire protection, and hydraulics. Skilled in creating accurate technical drawings and converting existing documentation into modern CAD formats. Proficient in converting PDF markups (engineer markups) to CAD format. Flexible to provide any drafting resources tailored to specific project requirements, ensuring high-quality and precise designs.

Revit design and management Mixed use residential, hi-rise and commercial projects Detail drawings for certification and construction

Revit design and management Mixed use residential, hi-rise and commercial projects Detail drawings for certification and construction

Hi, I am a professional civil engineer and architectural visualizer with 6-year experience. I can create any architectural project in 3D by using Archicad. and I will do realistic rendering in Lumio... Read more

Hi, I am a professional civil engineer and architectural visualizer with 6-year experience. I can create any architectural project in 3D by using Archicad. and I will do realistic rendering in Lumion I can offer you the following services 1. Converting your hand-drawn sketches or 2D drawings into a 3D model in Archicad 2. Architectural design for large, medium, and small projects. 3. Interior and exterior design 4. Realistic-looking rendering 5. Make a walkthrough with music 6. Building information modeling with Archicad If you have any questions, please feel free to ask me.

I am a highly-skilled, full-stack, physical Product Designer with a background in Industrial Design. My expertise lies in using modern digital tools and strategies to turn product ideas into reality.... Read more

I am a highly-skilled, full-stack, physical Product Designer with a background in Industrial Design. My expertise lies in using modern digital tools and strategies to turn product ideas into reality. I have diverse design experiences, having designed and built a house, completed home renovations, built furniture, documented toys, surface-modelled packaging, prototyped UIs, and contributed to a team developing world-class payments accepting devices. My passion is to help businesses achieve shared goals by leveraging my wide range of abilities. In addition to my design skills, I am interested in various fields, including business, property, UX/UI, health, sustainability, and renewable energy. I am always eager to expand my knowledge and skills in these areas. As a highly efficient and organised individual, I enjoy creating processes to streamline tasks, support team members, and benefit the broader organisation. Overall, I am committed to using my skills and interests to make a positive impact in my work and beyond. If you're interested in collaborating on a product, feel free to get in touch. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I have intermediate knowledge to use some tools like Microsoft Office Suite, Photoshop, Autocad, Inventor, Maya, Revit and Octave.

I have intermediate knowledge to use some tools like Microsoft Office Suite, Photoshop, Autocad, Inventor, Maya, Revit and Octave.

I am mechanical Engineer with more than 2 years of experience in Designing& teaching cad software like catia. If you need 3D Models, Renderings and 2D drawings created, then ican help you! I will des... Read more

I am mechanical Engineer with more than 2 years of experience in Designing& teaching cad software like catia. If you need 3D Models, Renderings and 2D drawings created, then ican help you! I will design 3D models of parts, assembly and engineering drawings. Satisfaction of clients is my priority on this platform. I am capable because I am confident of my skills. my major is designing dynamic system for road vehicle. i had done research about road vehicle and i can work with matlab simulink and adams software. The following are the services I provide: * 3D Designing * 3D Modeling * 2D PDF Drawings * 3D Rendering * Realistic Rendering * 2D Engineering Drawings * simulation with adams (car,view,insight,…) I use catia,Solidworks, AutoCAD, and 3DS max ,adams,keyshot, and Photoshop for all my work.

I've worked across a variety of industries within the entertainment sector mainly focused on model and prop production. Though these experiences I've been able to learn Fusion 360 and Rhinoceros 3D to... Read more

I've worked across a variety of industries within the entertainment sector mainly focused on model and prop production. Though these experiences I've been able to learn Fusion 360 and Rhinoceros 3D to create objects from full size modular set-trees for stage, to product design for local manufacturers. I see each new job as a unique challenge and an amazing opportunity to learn and deliver the best results for my clients.