Hire the best freelance Heat Transfer expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

CAD Designer | Mechanical Engineer | CFD & FEA Specialist Hi, I’m Habib, an undergraduate mechanical engineer with a strong command of SolidWorks, Fusion 360, and AutoCAD. I specialize in 3D CAD mod... Read more

CAD Designer | Mechanical Engineer | CFD & FEA Specialist Hi, I’m Habib, an undergraduate mechanical engineer with a strong command of SolidWorks, Fusion 360, and AutoCAD. I specialize in 3D CAD modelling, structural analysis, product design, and computational simulations (CFD & FEA). What I Offer: ✔3D CAD Modelling & Product Design: Functional & manufacturable designs for various industries. ✔ Finite Element Analysis (FEA): Stress, thermal, and vibration analysis for optimized performance. ✔ Computational Fluid Dynamics (CFD): Airflow, heat transfer, and aerodynamics simulations. ✔ Sheet Metal & Surface Modelling: Precise, industry-standard designs. ✔ Rendering & Visualization: High-quality, realistic product renders. Why Work With Me? ✅ Detail-Oriented & Reliable: Every project is handled with precision and professionalism. ✅ Fast Turnaround & Clear Communication: Get your designs on time with regular updates. ✅ Industry-Standard Tools: Expertise in SolidWorks, AutoCAD, Fusion 360, and Sim Scale. If you're looking for high-quality CAD modelling, simulation, or product design, let's connect! Let’s discuss your project today!

Hitech CADD Services is an ISO 9001:2008 & 27001:2005 certified, leading BIM & engineering design support providing company functioning in India since 1992. With a team of 700+ professionals and excel... Read more

Hitech CADD Services is an ISO 9001:2008 & 27001:2005 certified, leading BIM & engineering design support providing company functioning in India since 1992. With a team of 700+ professionals and excellent infrastructure capabilities, the company has remained a valuable design support partner for Fortune 500s and SMEs in the construction, engineering, and manufacturing sector. We nurture business relations based on principles of commitment, fairness, integrity, and excellence, our business thrives on an excellence based approach. We offer 2D/3D cad drafting, CAD conversion services, CAD modeling services across the world. Choose us as a partner that certainty of success for your business growth. BIM Solutions 1: BIM Services: Development of BIM for LOD 100 to LOD 500 requirements, BIM coordination, clash detection and as-built modeling using Revit, Navisworks, Building Design Suite (BDS). 2: Architectural Services: 2D drafting, 3D modeling, and animation for architecture & interior design support utilizing 3Ds Max, V-Ray, Revit, and AutoCAD. 3: MEP Services: MEP Drafting, MEP Drawings, MEP Coordination, MEP BIM, Clash Detection Services with help of Revit, Navisworks, Building Design Suite (BDS). 4: Structural Services: 2D and 3D CAD modeling for structural steel detailing, structural analysis and construction documentation utilizing Revit. Engineering Solutions: 1: Mechanical Design & Drafting: Engineering design & drafting support for machines & tools, industrial equipment, sheet metal components, millwork, furniture and building products utilizing AutoCAD, SolidWorks, Solid Edge, Inventor. 2: Design Automation: 3D Model and assembly creation to support design automation, Auto generation of 3D models, drawings and documents, automated BOMs, quantity takeoffs, CPQ solutions and RFIs, CAD Customization using DriveWorks, Tacton & SolidWorks. 3: Reverse Engineering: Point cloud to CAD conversion, 3D modeling and design optimization for legacy design data through AutoCAD, SolidWorks, Pro-Engineer and Solid Edge. 4: Rapid Prototyping: Development of printer-friendly CAD models for different additive manufacturing requirements using AutoCAD, SolidWorks, Solid Edge, Pro-Engineer, Creo, Inventor. 5: CFD Services: Simulating fluid flow to understand product behavior for single and multiphase flow, heat transfer and aerodynamic analysis using ANSYS Fluent, ANSYS CFX, OpenFOAM. 6: FEA Services: Determining structural, thermal and dynamic stresses to predict product performance and optimize design utilizing ANSYS Professional NLS, ANSYS Mechanical and ANSYS LS Dyna. Industries We Serve 1: Building Construction 2: Building Products & Components 3: Fabricated Metal and Alloy Products 4: Auto Ancillaries 5: Plant Design Engineering 6: Infrastructure 7: Heavy Engineering Hitech CADD Services has delivered 2500+ projects to more than 1000 clients in a span of more than 25 years. With global offices at five different locations in the USA, UK, Canada, Europe, and Australia & APEC regions the company is increasingly establishing itself as an extension to support engineering & design development processes for construction companies, manufacturing organizations, EPC firms and engineering companies located across the globe.

Mechanical Engineering Technologist with a solid educational foundation and extensive practical experience in HVAC, mechanical design, building and plant systems, power generating systems, heat transf... Read more

Mechanical Engineering Technologist with a solid educational foundation and extensive practical experience in HVAC, mechanical design, building and plant systems, power generating systems, heat transfer and thermodynamics, and material and process sciences. Holding a Bachelor of Technology in Engineering and Applied Sciences, my academic background also encompasses Project Management, Quality Management, Economics, Research Methods, and Business Management for Applied Sciences. As a Professional Technologist accredited by the Association of Engineering Technicians and Technologists of Newfoundland and Labrador (AETTNL), I have honed my skills in various roles, including drafter and designer on structural municipal and commercial projects. My expertise extends to mechanical drafting, process drafting, schematic design, and modeling of plant systems, mechanical systems and equipment, building ventilation systems, and other 3D modeling projects using CAD software. In addition to my technical skills, I have gained experience in project management, particularly in maintenance, design and construction involving collaborating with multiple disciplines. My role as a project coordinator at a local university involved overseeing numerous facilities management projects, coordinating with project managers, engineering professionals, and contractors both locally and nationally. My diverse skill set, coupled with my commitment to excellence and innovation, enables me to deliver high-quality solutions in engineering and applied sciences. I am passionate about leveraging my knowledge and experience to contribute to impactful projects and drive forward-thinking initiatives in the engineering field. I can be relied on to help you achieve your goals.

I am passionate about design and aeronautics, I grew up close to Fabrica Militar de Aviones in Cordoba, Argentina. I currently dedicate my time to work in a Renault assembly plant and lead a team of... Read more

I am passionate about design and aeronautics, I grew up close to Fabrica Militar de Aviones in Cordoba, Argentina. I currently dedicate my time to work in a Renault assembly plant and lead a team of aeronautical engineers, electrical engineers, mechanical engineers and CAD experts that work in multiple projects around the world. I can tackle complex design projects from conception to final design and execution. My and my team's experience covers the use of CAD, CATIA and the simulation of interactions of all disciplines of physics, structural, vibration, fluid dynamics, heat transfer and electromagnetic, especially in the aeronautics world. I can design pieces for engines, structural components, new product design, among others. I am based out of Cordoba, the base of the aeronautical and automotive industry in Argentina that includes the design and manufacture of the A-63 Pampa, an advanced jet trainer with combat capability, produced in Argentina with assistance from Dornier of Germany. I am able to fulfill projects on time, high accuracy, and at affordable rates. My passion is to deliver the best quality.

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas... Read more

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas of expertise • Building physics (natural ventilation & CFD application, daylighting, thermal comfort, heat transfer) • Energy assessments • Net Zero Carbon Studies • Energy Performance Certifications • Predicted operational energy use at design stage • Heating & Cooling Loads • Produce evidence requirements for BREEAM credits requiring thermal modelling outputs • Thermal comfort & Overheating Analysis • Low Zero Carbon Technologies Studies • Daylighting & Overshadow Analysis • Renewable Energy/Low Carbon Technologies: Photovoltaics, Solar Thermal, Biomass, Heat Pumps, Combined Heat and Power • HVAC systems knowledge Projects • Commercial buildings: schools, offices, healthcare, leisure & sports centers, hotels, retails, university facilities, museum, airport facilities • Residential buildings • Mixed-use developments • Solar PV design (size & select the equipment, energy simulation, electrical drawings & pv panels layout in CAD) • Solar thermal system design & simulation for a house Softwares: IES VE, EDSL TAS, DesignBulder, CAD, Revit, PVsyst, SketchUp, TSOL, STROMA, MS Office

Mechanical engineer with expertise in structural mechanics and design. Expert in Machine Component Design that include. • 3D modelling • Finite Element Analysis (Linear Static and Dynamic, Buckling,... Read more

Mechanical engineer with expertise in structural mechanics and design. Expert in Machine Component Design that include. • 3D modelling • Finite Element Analysis (Linear Static and Dynamic, Buckling, Modal, Non-linear static and Dynamic, Fatigue analysis, Multibody Dynamic) Other Engineering Skills • Engineering Calculation (Static, Dynamic, Mechanic of Material, Fluid Mechanic, Thermodynamic, Heat transfer) • Computational Fluid Dynamics Simulation Software: PTC Creo, SolidWorks, Altair Hyperwork, Femap

I`m a Mechanical Engineer and at this moment I`m working as machine designer for the pharamaceutical Industry in Colombia. I have good skills using CAD softwares and also with calculation of mechanica... Read more

I`m a Mechanical Engineer and at this moment I`m working as machine designer for the pharamaceutical Industry in Colombia. I have good skills using CAD softwares and also with calculation of mechanical elements and also heat exchangers and steam generators.

*** What we do? *** 1/ Finite Element Analysis (FEA): - Predict product behavior through linear, nonlinear, thermal, and dynamic analyses - Estimate fatigue life and fracture propagation of produc... Read more

*** What we do? *** 1/ Finite Element Analysis (FEA): - Predict product behavior through linear, nonlinear, thermal, and dynamic analyses - Estimate fatigue life and fracture propagation of product - Analyse weld fatigue, vibration fatigue, low/high cycle fatigue, and composite fatigue - Optimise designs and validate product performance before production 2/ Computational Fluid Dynamics (CFD): - Inspect fluid flow, air flow, free surface flows (multiphase) - Analyse thermal management and heat transfer - Turbomachinery, turbulence and combustion - Fluid-Structure Interaction (FSI) and thermal FSI - Make faster and better decisions in the product development process 3/ Consulting Services: - Provide specialised solutions to engineering problems ranging from basic to complex analyses in the areas of structural analysis and fluid dynamics, applied mechanics and heat transfer. - Additional services include design verification/auditing, new product R&D, physics calculations. *** Why choose us? *** Our qualified services are the result of years of scientific study and international working experiences. The owner and experienced engineer, Tri Tien (Tri is pronounced as Tree), has more than 10 years in simulation and manufacturing industries, both in Australia and overseas. Before starting CAEbay, Tri had previously performed various roles as technical engineer, production & development engineer, and engineering head for many companies covering a range of industries including mechanical simulation, composite manufacturing, wood machining and fitness equipment manufacturing. Tri holds a Bachelor of Automotive and Engine Engineering from Ho Chi Minh City University of Technology, a Masters of Science from Konkuk University South Korea, and a PhD in Computational Engineering from University of Southern Queensland. Tri has published more than 15 peer-reviewed international journal articles and conference papers in the area of computational engineering. "CAE only delivers meaningful results if the engineer driving the computer fully understands the theory behind the simulation." *** What clients say? *** “It became clear that Tri has an unusual ability to computer model both physical objects and processes involving thermodynamics, movements of fluids and combinations of these.” Director Cliff Walker, Vacmobiles.com ltd., New Zealand. “We encountered some serious failure problems that halted our sales. Tri quickly identified the cause of the failures and invented a fail-safe substitution that allowed us to resume sales.” Thomas R. Anthony Ph.D, NAE., America. “With a very tenacious and robust problem solving ability, Tri was able to apply a deep technical knowledge into an array of projects to improve both existing systems along with the research into new areas of possible business.” David Pring, Managing Director, Timber and Laminate Services Pty Ltd., Australia.

I have a strong connection between knowledge, experience, and creativity. I pay close attention to detail and strive to create not only functional but also aesthetically pleasing products and devices.... Read more

I have a strong connection between knowledge, experience, and creativity. I pay close attention to detail and strive to create not only functional but also aesthetically pleasing products and devices. With extensive experience in large-scale projects, I know how to lead and manage tasks effectively, integrate multidisciplinary solutions, and deliver exactly what is required. Key Skills and Experience: 🔹 CAD Systems: Catia V5/V6, SolidWorks, Creo (Pro/E), Siemens NX, AutoCAD (Mechanical, Architecture), Autodesk Inventor/Fusion, Mechanical Desktop, Chief Architect, Revit, SketchUp, 3DVIA Composer, DraftSight 🔹 CAM: Delcam, Siemens NX NC, CATIA NC Modules, Sinumerik 840D 🔹 CAE & Simulation: Moldflow, ANSYS (including CFX), Abaqus, LS-Dyna, COMSOL, AutoForm, MAGMA5, SUTCAST, Simulia, Adina, Nastran, Patran, EasyBlank, Femap 🔹 Mining & Geology: Noddy, Strater, RockWorks, GeoStudio, Surpac, Surfer, Paraview Geo, Geovia 🔹 GIS: QGIS, ArcGIS, MapInfo Professional 🔹 Project Management & PLM: SAP Enovia, Siemens Teamcenter 🔹 BIM: Digital Project 🔹 Rendering & Visualization: PhotoView360, Lumion, Showcase, KeyShot, Artlantis Studio 🔹 Programming Languages: Fortran, Visual Basic, Scheme 🔹 LIDAR, Geodesy, GIS Expertise 🔹 Software & Communication Tools: MS Office, OpenOffice, Adobe Photoshop, Lightroom, Dreamweaver, Thunderbird, MS Access 🔹 Optics & Simulation: Zemax, TracePro, OSLO, CODE V, ASAP Additional Expertise: Geometric Dimensioning & Tolerancing (ANSI Y14.5M/ASME Y14.5, ISO standards) BOM creation and management CFD, Heat Transfer, FEM, Sheet Metal Forming, Collision & Impact Analysis Rapid Prototyping, SQL Queries Strong social and technical skills Analytical thinker with strong decision-making abilities Ambitious, communicative, and adaptable to diverse work environments I am highly motivated to grow professionally and eager to take on new challenges.

Mechanical Engineer with more than 15 years of experience in the design, calculation, and optimization of industrial equipment and pressure systems. I specialize in pressure vessels, autoclaves, ther... Read more

Mechanical Engineer with more than 15 years of experience in the design, calculation, and optimization of industrial equipment and pressure systems. I specialize in pressure vessels, autoclaves, thermal systems, and custom industrial machinery, working in compliance with European regulations and standards such as EN 13445, PED, AD 2000, and ATEX when applicable. My background includes the complete engineering lifecycle of industrial equipment: • Concept development and feasibility studies • Mechanical and thermal calculations • Pressure equipment design and verification • CAD design and detailing (SolidWorks, AutoCAD, Plant 3D) • Manufacturing drawings and technical documentation • Design optimization for safety, cost, and manufacturability • Support for certification, audits, and regulatory compliance I have extensive experience working with regulated environments, including pharmaceutical and process industries, where traceability, documentation quality, and compliance are critical. Typical deliverables I provide include calculation reports, Excel-based engineering tools, 2D manufacturing drawings, 3D CAD models, and technical documentation ready for internal reviews or third-party certification. I work closely with clients to translate functional requirements into robust, manufacturable engineering solutions, maintaining clear communication, realistic timelines, and a strong focus on engineering quality. Industries served include industrial equipment manufacturers, process engineering companies, pharmaceutical and biotech suppliers, and custom machinery builders.

I am an experienced researcher with a strong aerospace and mechanical engineering background. My work has involved a range of analytical, computational, and experimental analyses. As a curious and amb... Read more

I am an experienced researcher with a strong aerospace and mechanical engineering background. My work has involved a range of analytical, computational, and experimental analyses. As a curious and ambitious individual, I am always seeking to learn and discover new things. Currently, I am employed as an Aerothermal LAB Engineer, researching the thermal analysis and management of un-conditioned avionics systems. Specifically, I am using the Design of Experiment technique to evaluate the thermal behavior of avionics systems under different altitude and Mach number conditions and verifying the resulting data through both analytical and computational analysis. Previously, I worked as a Research Assistant, performing analytical and computational analysis for the thermal management of avionics systems placed in conditioned bays and qualifying the thermal design of avionics according to MIL-STD-5400E for airworthiness. My area of interest include: • Thermo-fluids and heat transfer • Aerothermodynamics of the high-speed airborne platform • Computational and numerical fluid dynamics • Turbomachinery and power-plant design • Optimization I have proficient skills in: • ANSYS (thermal, fluids, structural, topology optimization, and design exploration) • SOLIDWORKS, Inventor, and Fusion 360 • MATLAB In addition to my research routine, I am studying various subjects including rocket propulsion and vehicle design, intelligent computation in engineering, and air-breathing engines.

Summary 🚀 I’m a Mechanical & Aerospace Design Engineer specializing in EV systems, advanced CAD modeling, and high-fidelity FEA/CFD simulations. With hands-on experience at Jaguar Land Rover and a s... Read more

Summary 🚀 I’m a Mechanical & Aerospace Design Engineer specializing in EV systems, advanced CAD modeling, and high-fidelity FEA/CFD simulations. With hands-on experience at Jaguar Land Rover and a strong portfolio across automotive, aerospace, and energy systems, I bring engineering precision, modern design practices, and simulation-driven insights to every project. My approach blends product-ready CAD, robust analysis, and clear technical communication—ensuring you receive solutions that are accurate, manufacturable, and aligned with real-world engineering standards. 📂 Key Skills Organized into categories: 1. CAD Engineering ⭐3D Part & Assembly Modelling ⭐GD&T & Tolerance Stack-ups ⭐Design for Manufacturing (DFM) ⭐Sheet Metal, Plastics, Castings ⭐Complex Surface Modelling 2. CAE / Simulation ⭐Static Structural Analysis ⭐Modal & Harmonic Analysis ⭐Crash or Failure Prediction ⭐Fatigue Simulation ⭐Thermal & CFD using STAR-CCM+ ⭐J-integral / Crack Propagation 3. Automotive Expertise ⭐EDU Drive Components ⭐EV Battery Pack Layout & Thermal Analysis ⭐Harness Routing ⭐Powertrain & Chassis Components. 4. Aerospace Engineering ⭐Wing analysis, fuselage fatigue & crack propagation ⭐Stress, vibration, aerodynamic studies ⭐Lightweight structures & regulatory-aligned design 🌟 Why Work With Me ✅ Industry Experience with Global Brands Delivered engineering designs and simulations for Jaguar Land Rover and aerospace manufacturers. ✅ End-to-End Engineering Delivery From concept CAD → analysis → design optimization → documentation. ✅ Simulation-Driven Accuracy Every output is validated with FEA/CFD workflows, ensuring performance and reliability. ✅ Strong Grip on Standards ISO/GD&T, automotive/aerospace compliance, tolerance studies, DFMEA, DVP&R. ✅ Fast, Clear, and Professional Communication Technical reporting, customer-facing documentation, and agile delivery. 📌 Services I Provide ✅3D CAD modeling & detailed engineering drawings ✅FEA analysis (static, modal, fatigue, thermal) ✅CFD for aerodynamics, heat transfer & HVAC ✅Battery pack mechanical design ✅EDU/Powertrain CAD development ✅Aerospace structural & aerodynamic simulations ✅Reverse engineering, prototyping & manufacturing support ✅Technical documentation (DFMEA, DVP&R, engineering reports) 🛠️ Software Tools ANSYS | Abaqus | CFD | STAR-CCM+ CATIA V5/V6 | NX | SolidWorks | CREO | AutoCAD MATLAB | Simulink 🚀 Let’s Build Something Exceptional If you're looking for a skilled, reliable, and detail-oriented engineer who merges strong industrial experience with advanced simulation and CAD expertise, I’m ready to support your project. Let’s collaborate and turn your idea into a high-performance engineering solution. #CAD #ANSYS #CFD #FEA #EV #BatteryPack #Aerospace #MATLAB #CATIA #SolidWorks #HVAC #SimulationEngineer #3DModeling #EngineeringDesign less

My educational background is in Instrumentation,Applied Physics and mechanical engineering. I studied at: -University of Poitiers in France -Strathclyde University in the UK, -the prestigious Technic... Read more

My educational background is in Instrumentation,Applied Physics and mechanical engineering. I studied at: -University of Poitiers in France -Strathclyde University in the UK, -the prestigious Technical University of Munich in Germany, -QUT in Brisbane in Australia. I am a driven, creative and organised executive engineer. I have been a company director since 2011, and this shows up in the way I cut to the chase, build strategies and plans, track progress, report and interact with people. I only do high-quality research and modeling. My moto is: first time right. I delegate simpler work and do all the really challenging work and peer reviews myself. I have reached the stage in my career where projects in any industry are similar. If it flows, I can design it. For example, the set-up of the CFD with waves for the marine industry is identical to the set-up of an electromagnetic radiation model. The waves need to be dampened at the boundaries of the models so that the model is not riddled with non-physical reflected waves. Setting up a mesh (pixelisation of the geometry on which the equations are calculated) for a marine foil has exactly the quality criteria as a mesh of a heat exchanger. In all R&D projects, spending between a few days to a few weeks in the most complex cases, enables me to become an expert in the field. My favorite type of project is R&D. I love going deep, learning new things, planing and figuring out how something’s going to work and how to optimise it. I have used Computational Fluid Dynamics (CFD) professionally since 2006. After a thorough CFD software comparison, I selected Siemens STAR-CCM+ and I have used it exclusively ever since. Star-CCM+ is a high productivity CFD software, equivalent to ANSYS Fluent. For more information: resolvedanalytics.com/theflux/comparing-cfd-software-part-4-comprehensive-cfd-software-packages My first job (9 years) was in building physics, for a premium building services consultancy. I set up the CFD modelling capability from scratch, and I became the CFD expert in the Australian Standards 1668.2 committee. I performed CFD modelling for: ventilation (natural and mechanical), fire, active facades conjugate heat transfer, pollutant dispersion and wind. My performance-based designs saved carpark owners and contractors 100,000's of $. I spent most of 5 years researching active facades that store energy and redirect sunlight deep in the building. I modelled heat transfer, phase change and radiation in the CFD software. In 2015, my mother was diagnosed with cancer, and I moved back to France temporarily with my family to look after my parents. I decided to start a "portable" consulting and supercomputing business and called it trampoCFD. Trampo for trampoline: my secret weapon to keep a creative mind is an Olympic trampoline break multiple times a day. I applied my CFD knowledge to improve process performance in many different industries: pneumatic conveyors, mining classifier, injectors, factory, vertical farm and carpark HVAC, irrigation, ohmic heating, coffee machine, marine and wind power generation to name a few. My skills include: -dilution/dispersion, -mixing, -Multi-phase and phase change (Free surface flow, evaporation/condensation, melting/solidification) -Electromagnetics (Joule's effect, Ionic wind, electromagnet) -DEM (grain, sand) -Conjugate heat transfer -Automation -Optimization -Moving bodies -CAD: Solidworks and NX -FEA: Electromagnetic static or dynamic simulations In 2019, Siemens approved me as a software reseller, which means Siemens recognised my ability to provide technical support to CFD engineers on Star-CCM+. This enables me to continue helping my clients once they develop an in-house CFD capability. In 2020, I became the lead CFD engineer of a group of 4 engineers and 2 developers who take on the most complex CFD and multiphysics consulting projects . I hope the above summary gives you a clear idea of my capability. I would love to discuss your project. Please get in touch! Best Regards, Guillaume Jolly ▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒: guillaume_jolly_pro ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ (iphone: ▒▒▒▒▒▒▒▒ & ▒▒▒▒▒▒▒▒, ▒▒▒▒▒▒▒▒)

Skills: Design and fabrication of various automobile parts. Technical curiosity, Innovation, Willingness to learn. Projects: Dual fuel injection in CRDI engine. Manufacturing and evaluation of Yttrium... Read more

Skills: Design and fabrication of various automobile parts. Technical curiosity, Innovation, Willingness to learn. Projects: Dual fuel injection in CRDI engine. Manufacturing and evaluation of Yttrium Tantalite material. Heat transfer in double pipe heat exchanger.

We are an adaptable and innovative qualified Engineering team with over 9years experiences in developing new products and innovations and assisting through all development steps Sketching and gener... Read more

We are an adaptable and innovative qualified Engineering team with over 9years experiences in developing new products and innovations and assisting through all development steps Sketching and general calculations --> Conceptual design --> Detailed design (Mechanical & Electrical) --> Simulations (FEA, CFD, heat transfer, motion analysis, etc.) --> Shop drawings (2D, BOM, PCB schemes, CNC machines programs) --> Manufacture --> Assembly --> Programming --> Testing --> documentation --> upgrade. Our services DESIGN of 1- Machines 2- Products 3- PCBs Programming for 1- PLC 2- SCADA & DCs Systems 3- Arduino 4- Microcontroller 5- MatLab MANUFACTURE by 1- CNC machines (Laser cut, milling, turning, etc...) 2- 3D printing 3- PCB soldering FREE SERVICE 1- CONSULTING IN ANY STEPS OF THE PRODUCT DEVELOPMENT CYCLE I am Ahmed, the contact person, kindly contact me anytime :) Also, you can see work samples here

I'm a professional mechanical engineer with 5 years of computer-aided design experience. I will do product designing, mechanical designing, simulations, analysis, and calculations related to mechanica... Read more

I'm a professional mechanical engineer with 5 years of computer-aided design experience. I will do product designing, mechanical designing, simulations, analysis, and calculations related to mechanical engineering. I will assist you in the accompanying primary areas of mechanical designing including: 3D computer-aided design (CAD) including parts and assemblies. 3D Drawings Finite Element Analysis (FEA) Flow Simulations Thermal Analysis Report Writing in the Thermodynamics, heat transfer, energy conversion, and HVAC Fuels, combustion, Internal combustion engine.

As a dedicated Mechanical Engineer with over 5 years of industry experience, I have delivered more than 200 successful projects, turning innovative ideas into high-performance solutions across diverse... Read more

As a dedicated Mechanical Engineer with over 5 years of industry experience, I have delivered more than 200 successful projects, turning innovative ideas into high-performance solutions across diverse sectors. My expertise spans CAD design, advanced simulations, and complex problem-solving, allowing me to tackle a wide range of engineering challenges with precision, creativity, and passion. CAD Design and 3D Modeling My proficiency in CAD design is deeply rooted in SolidWorks, where I specialize in creating detailed 3D models, assemblies, and technical drawings for manufacturing, prototyping, and product development. Whether you're looking for conceptual designs, product development, or fully engineered parts ready for production, I ensure that every model is meticulously crafted to meet industry standards and client requirements. Some of my key CAD projects include: High-Efficiency Glass Shredders: I designed and manufactured custom glass shredders for waste management, incorporating precision engineering with durable materials for long-lasting performance. 3-Axis to 5-Axis CNC Conversion: I successfully upgraded a client's 3-axis CNC machine to a 5-axis, enabling more complex machining tasks while maintaining precision and reliability. Solar-Assisted Wheelchair Design: This project involved the full CAD design and rendering of an innovative solar-assisted wheelchair, featuring a 5-hour battery backup and a speed of 12 km/h. These projects showcase my ability to deliver on highly technical and customized design requirements while ensuring functionality, durability, and aesthetic appeal. Advanced Simulations and Analysis I am highly skilled in performing advanced simulations using ANSYS Fluent and SolidWorks Flow Simulation. My expertise in CFD (Computational Fluid Dynamics) allows me to optimize designs for performance and efficiency, whether you're dealing with fluid dynamics, heat transfer, or complex multi-phase flows. Here are a few highlights from my simulation projects: Mixing Tank Simulations: I have conducted multiple advanced mixing tank simulations, focusing on improving mixing efficiency by optimizing blade placement and tank geometry. This includes high-viscosity fluid and solid particle mixing, delivering enhanced performance for industrial applications. Turbomachinery and Aerodynamics: I have completed aerodynamics and turbomachinery simulations to analyze and optimize airflow, minimizing drag, and increasing the efficiency of rotating machinery and automotive components. Thermal Mixing and Heat Exchangers: My work on thermal mixing and helical coil heat exchangers involves comprehensive CFD simulations to evaluate temperature distribution, pressure drop, and thermal efficiency, ensuring optimal heat transfer for industrial systems.

Licensed mechanical engineer PA with 16 years of experience in design and manufacturing in mechanical industries such as plastic-making machines, steel, paper, ventilation, impellers, etc. Machine an... Read more

Licensed mechanical engineer PA with 16 years of experience in design and manufacturing in mechanical industries such as plastic-making machines, steel, paper, ventilation, impellers, etc. Machine and equipment design experience is from concept to manufacturing. Services I Provide: Rotordynamic FE Analysis 3D Mechanical Concept Modeling, and 2D Manufacturing Drawing. 3D Modeling for 3D Printing and Prototyping. CFD, Mechanical, FEA, and modal analysis using Ansys software plastic parts, all kinds of plastic parts, small to large, with all necessary features for successful molding without, frozen walls, sink-marks, drafts, mounting bosses sheet metal, all kinds of sheet-metal parts, bend, punching, unfolding step, igs. files to get the correct start shape. reverse engineering FEA structure optimization, calculations on the loads and durability of an existing product or new design. My analysis background includes the following: Stress FEA & CFD     Polymer extrusion Thermodynamics Heat Transfer - Conduction, Forced and Natural Convection, Radiation Ventilation Vibration Hydraulic Bearing performance Electromagnetic Force Analysis So if you really want your project done with top quality, with no false results, engineering approach, hire me and leave the rest to Me !!! Communication is key. I always strive to clearly understand my client's needs before starting any project to make sure we are in agreement on what the final product should be. Tags: CATIA, SolidWorks, Solid-Edge, NX, ANSYS, Autodesk Inventor, AutoCAD ... CAD Drafting, 3D modeling, CAE calculations, CFD calculations, product optimization, 3D printing, 2D to 3D conversion, Reverse engineering (damaged product to 3D/2D documentation...

I believe that a solution should be simple and cheap, even for a complicated problem. With experience in mechanical design, CAD solid design, gear transmission, chain transmission, HVAC equipment, pip... Read more

I believe that a solution should be simple and cheap, even for a complicated problem. With experience in mechanical design, CAD solid design, gear transmission, chain transmission, HVAC equipment, pipes, ducts, heat transfer, thermodynamics, fluid mechanics and FEM analysis, I am able to provide engineering solution in many different fields. I am also familiar with basic electricity, electronics, control systems, and can write basic code in C language or MATLAB. On a personal note, I take great interest in new developing technologies and high-tech products. I also have hobbies like playing the electric guitar (and music in general), motorsport and cooking.

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project... Read more

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project engineer. These projects enabled me to gain experience in these areas: -Mechanical Design of Industrial Plants (Chemical, oil & gas, power, food, pharmaceutical, cosmetics) -Preparing PFD P&ID Drawings -3D Pipeline Design (ASME B31.1, ASME B31.3) -Pipe Stress Analysis (ASME B31.1, ASME B31.3, Metal, FRP and GRP piping) -Static Equipment/Process Equipment Design (chemical reactors, mixing tanks, heat exchangers, etc.) -Pressure Vessel Design (ASME Section VIII, EN 13445, AD 2000 - AD Merkblätter, PD 5500, CODAP) -Storage Tank Design (Oil & Gas, solvent, acid, underground and aboveground) (API 620, API 650, API 653, EN 12285-1, EN 12285-2) I want to combine my experience and my ability in design to provide the highest quality service for my clients.

I use SolidWorks, Ansys, and Blender. Skills: CAD design Heat transfer and fluid flow analysis (CFD) Structural Analysis (FEA) Reporting Rendering Animation for marketing

I use SolidWorks, Ansys, and Blender. Skills: CAD design Heat transfer and fluid flow analysis (CFD) Structural Analysis (FEA) Reporting Rendering Animation for marketing

Greatly intrigued by the Design of Everyday Things, I am here to give your designs a facelift!! I started out with Solidworks and AutoCAD and have completed a couple of projects in my college days. I... Read more

Greatly intrigued by the Design of Everyday Things, I am here to give your designs a facelift!! I started out with Solidworks and AutoCAD and have completed a couple of projects in my college days. I also have working knowledge of CATIA, Creo and other CAD software, as per requirements. A good understanding of mechanical design and blueprints has paved the way for Design Optimization (Altair Inspire, Fusion 360) and CAE Analysis (Proficiency in Ansys Fluent). My current expertise has been mostly centred around Numerical Heat Transfer and Incompressible Flows and I am very keen on exploring Multiphase Flows and Conjugate Heat Transfer as well.

I'm a certified Expert in Generative Design for Manufacturing, Senior Mechanical Engineer and Industrial Designer. I have a strong background in simulation-based engineering, and I love using tools li... Read more

I'm a certified Expert in Generative Design for Manufacturing, Senior Mechanical Engineer and Industrial Designer. I have a strong background in simulation-based engineering, and I love using tools like FEA and CFD analysis to design and optimize products for different industries. Whether it's consumer products, home appliances, automotive, aerospace, or civil and industrial engineering, I've got you covered. ✅ Mechanical Engineering ✅CNC/CAM (Computer Aided Machining) ✅FEA Analysis (Finite Element Analysis) ✅CFD Analysis (Computational Fluid Dynamics) ✅CAE Analysis (Computer-Aided Engineering) ✅ Product Design ✅ Expert 3D CAD Design (Fusion 360) ✅ Design Optimization ✅ Structural Mechanics ✅ Stress Analysis ✅ Numerical Optimization ✅ Fluid Flow ✅ Heat Transfer ✅ Injection Molding and Forming Analysis What really sets me apart is my multidisciplinary knowledge and expertise in product design. I use advanced CAD software like Fusion 360 to ensure that the products I design not only meet all your requirements but are also optimized for cost-effectiveness and can give you a competitive edge in the market. I'm also well-versed in various areas of engineering analysis, such as structural mechanics, stress analysis, NVH, numerical optimization, fluid flow, heat transfer, electromagnetic analysis, and injection molding and forming analysis. This means I can support my product design with powerful CAE simulations or even perform standalone simulations on existing products. I take great pride in my track record, with a 100% job success rate. I always strive to exceed my clients' expectations, and I bring fresh ideas and approaches to every task. Communication is key for me, and I'm fluent in English, French and Spanish.

Mechanical Engineer with more than 14 years of experience in engineering projects related the piping and equipment design. I have worked in the design of several onshore and offshore facilities includ... Read more

Mechanical Engineer with more than 14 years of experience in engineering projects related the piping and equipment design. I have worked in the design of several onshore and offshore facilities including: dehydration and separation process, fire protection systems, secondary oil recovery’s systems with water injection and treatment plants, gas compression systems, oil and gas transportation pipelines. I´m very well recognized by all my clients for all the solutions that I find for engineeringproblems.

I am a professionally licensed mechanical engineer with over 10 years of design experience using CAD, 3D Modeling, and BIM software. I have designed a large variety of products and systems ranging fro... Read more

I am a professionally licensed mechanical engineer with over 10 years of design experience using CAD, 3D Modeling, and BIM software. I have designed a large variety of products and systems ranging from custom mechanical valves to chilled water cooling systems for a semiconductor manufacturing facility. From executing design calculations, to issuing official drawings, to overseeing the construction of my designs, I am diligent, precise, and confident in my work.

Research And Development Mechanical Engineer, having 3 years of experience at various fields such as numerical analysis, aerospace, aeronautics, product design, robotics, Fluid power systems, pluming... Read more

Research And Development Mechanical Engineer, having 3 years of experience at various fields such as numerical analysis, aerospace, aeronautics, product design, robotics, Fluid power systems, pluming and networking. Worked at Egypt, Canada (Remotely), Australia (Remotely). Have knowledge, skills and attitude to design, analyze performance and maintain high performance products such as (chassis, solar systems, fans, ducts, thrusters, networks, casings, sealing systems, drilling tools, samplers, valves, hydraulic and pneumatic systems, automated machines and robots). Develop strategies, improve overall performance and reliability and safety of products. Deep knowledge of numerical analysis such as computational fluid dynamics, structural mechanics, fluid–structure interaction, heat transfer. Top skills: Computational Fluid Dynamics (CFD) • Research and Development (R&D) • Finite Element Analysis (FEA) • Problem Solving • Product Development