Hire the best freelance EMI/EMC PCB Design expert designers for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

I am an Electronics and PCB Design Engineer with hands-on experience in schematic development, PCB layout, circuit simulation, embedded hardware, mixed-signal electronics, and RTL verification. I hold... Read more

I am an Electronics and PCB Design Engineer with hands-on experience in schematic development, PCB layout, circuit simulation, embedded hardware, mixed-signal electronics, and RTL verification. I hold a B.Tech in Electrical and Electronics Engineering from VIT with a 9.76 CGPA and am a Marvell M-STEM Excellence Scholar. I work with Altium Designer, KiCad, LibrePCB, DesignSpark PCB, Cadence Allegro, LTspice, Qucs-S/ngspice, and OrCAD PSpice. My services include component selection, schematic capture and review, two-layer and four-layer PCB layout, symbol and footprint creation, ERC/DRC resolution, circuit simulation, BOM preparation, Gerber and manufacturing outputs, and technical documentation. My experience includes developing safety-critical PCBs, an LTC6811-based battery-management system, CAN communication and data-acquisition circuits for an electric Formula Student vehicle. I have also contributed to a low-noise wearable physiological-monitoring platform at IIT Mandi and worked on STM32, ESP32, USB-C, power-converter, sensor-interface, and IoT hardware. Alongside PCB and embedded development, I have designed a four-stage RV32I processor in Verilog and developed self-checking cocotb testbenches using Verilator. This gives me experience approaching projects from both the electronic-system and digital-design levels. I value clear communication, careful documentation, and practical engineering. I document assumptions, follow datasheet recommendations, and design with reliability, manufacturability, testing, and future debugging in mind.

I am an Electrical Engineering student at NUTECH Islamabad with hands on experience in PCB design and embedded systems I design custom PCBs in KiCad from scratch — starting from schematic all the way... Read more

I am an Electrical Engineering student at NUTECH Islamabad with hands on experience in PCB design and embedded systems I design custom PCBs in KiCad from scratch — starting from schematic all the way to Gerber files ready for manufacturing. My designs are clean DRC verified and optimized for real world manufacturing at fabs like JLCPCB and PCBWay Projects I have designed: Arduino Nano Breakout Board with full pin breakout screw terminals reset button and reverse polarity protection Custom ESP32 development board Custom Arduino Nano board Bidirectional Visitor Counter Smart Irrigation System Line Follower Robotics What I bring to your project: Complete KiCad workflow from schematic to layout to Gerbers 2-layer pr multi-layer PCB design optimized for low cost manufacturing Proper design rules clearances and DRC verification and EMI verification as well before delivery Clean silkscreen labelling and 3D verification of every board I take your idea and turn it into a manufacturable board ready to order

I am a multidisciplinary engineer specializing in the integration of mechanical design, electronics, and software development to deliver complete, real-world engineering solutions. With a strong found... Read more

I am a multidisciplinary engineer specializing in the integration of mechanical design, electronics, and software development to deliver complete, real-world engineering solutions. With a strong foundation across these domains, I bring a systems-level perspective that allows me to design, prototype, and implement projects from concept to deployment. On the mechanical side, I have extensive experience in CAD design, product development, and manufacturing-ready solutions. I focus on creating efficient, practical designs that consider real-world constraints such as materials, fabrication methods, and cost optimization. In electronics, I work with embedded systems, PCB design, and hardware integration. I am comfortable developing schematics, selecting components, and ensuring reliable communication between hardware and control systems. On the software side, I develop firmware and control logic for embedded devices, as well as higher-level applications for automation, data acquisition, and system monitoring. I have experience working with microcontrollers, PLCs, and industrial communication protocols, enabling seamless integration between hardware and software systems. What sets me apart is my ability to bridge these disciplines. Instead of treating mechanical, electrical, and software components separately, I design them as a unified system—resulting in more robust, efficient, and scalable solutions. I have worked on projects ranging from industrial automation and embedded systems to custom machinery and prototyping. I collaborate effectively with cross-functional teams, including mechanical engineers, electrical engineers, and software developers, ensuring smooth communication and successful project delivery. If you are looking for someone who can take ownership of a project end-to-end, reduce complexity, and deliver practical engineering solutions, I would be glad to help bring your ideas to life.

I am Ahmed Nawaz and Experienced PCB Design Engineer with experience of delivering high-quality and reliable printed circuit board layouts. Proficient in leading industry tools: Altium Designer, KiCad... Read more

I am Ahmed Nawaz and Experienced PCB Design Engineer with experience of delivering high-quality and reliable printed circuit board layouts. Proficient in leading industry tools: Altium Designer, KiCad, and Eagle, with expertise in multi-layer PCB design, signal integrity, and power distribution optimization. ★ Skills: High-speed PCB design, EMI/EMC compliance, and thermal management. ★ Software Expertise: Altium Designer, KiCad, Eagle, OrCAD ★ Technical Skills: Schematic capture, design rule checks (DRC), and PCB manufacturing process understanding. Successfully completed over 50+ PCB designs for consumer electronics, automotive, medical and IoT devices. Proficient in working with Arduino, ESP32, STM32, and Raspberry Pi. Experienced in implementing communication protocols I2C, SPI, UART, MQTT, CAN Bus, and Modbus, as well as integrating wireless technologies like BLE, LoRaWAN, Zigbee, and Wi-Fi. Skilled in sensor interfacing, RFID/NFC systems, GPS modules, RTOS (FreeRTOS, Zephyr), and designing efficient power management systems with PMICs, DC-DC converters, and LiPo charging circuits.

As a DAE in Electronics with 03 years at the Pakistan Navy's Naval Precision Electronics Complex (NPEC), I specialize in precision multi-layer PCB design, ensuring optimal signal/power integrity and D... Read more

As a DAE in Electronics with 03 years at the Pakistan Navy's Naval Precision Electronics Complex (NPEC), I specialize in precision multi-layer PCB design, ensuring optimal signal/power integrity and DFM/DFT adherence. My experience in mission-critical systems, including advanced radars and sonars, demonstrates a strong capability in complex electronic troubleshooting and problem-solving, making me adept at delivering robust and reliable designs for diverse projects.

More than 30 years designing and manufacturing test prototypes of printed circuit boards, as well as large series manufacturing. My professional experience includes managing several production depa... Read more

More than 30 years designing and manufacturing test prototypes of printed circuit boards, as well as large series manufacturing. My professional experience includes managing several production departments, supporting the R&D department, industrial electronic technician and electronic assembler. This Knowledge and acquired skills are essential for efficiently and effectively design a 3D printed circuit board. Do you want to know more about my work? Please visit 3dpcb.es

Hello, Everyone! I am an embedded systems engineer, PCB designer, and firmware developer with over 10 years of professional experience. I provide complete, end-to-end solutions for a wide range of ele... Read more

Hello, Everyone! I am an embedded systems engineer, PCB designer, and firmware developer with over 10 years of professional experience. I provide complete, end-to-end solutions for a wide range of electronic device designs, supporting clients from initial concept and schematic design to PCB layout, prototyping, assembly, and full system testing. I have strong expertise in high-speed PCB design, including PCIe and DDR4 routing, as well as precise impedance matching for reliable performance at high frequencies. I also specialize in RF and antenna design for modern IoT devices, ensuring optimal signal integrity and system efficiency. In addition, I have deep experience in ultra-low power design, achieving microamp and sub-microamp current consumption for battery-operated and wearable systems. I specialize in firmware development for LTE-GPS-LoRa-BLE-based embedded systems (nRF52 series), including low-power optimization and high-precision sensor acquisition. My focus is on delivering robust, production-ready solutions with high reliability and performance. 🔥 Main Skills 👉Embedded Systems 👉Schematic Circuit Design(Low Power consumption Design) 👉Firmware Development(All Microcontrollers-STM32, TMS320, ESP32, FPGA, nRF52, Raspberry PI) 👉PCB Design(High speed signal routing, PCIe, DDR4, 18 multi-Layers Design, RF antenna Design,) using Altium Designer, KiCad, EasyEDA, Fusion 360(No problem in DFM-JLCPCB) 👉IoT with nRF52(BLE), LoRa(for example, SX1262), LTE(SIM card interface), GPS and other variety of sensors 🛠️Tools & Technologies: 👉 nRF5 SDK / nRF Connect SDK 👉SEGGER Embedded Studio + J-Link debugging 👉 C/C++ (bare-metal & RTOS) 👉 BLE GATT, LTE AT commanders, custom wireless protocols 👉SPI / I2C / UART / ADC integration 👉Low-noise measurement systems (nA level) 👉STM32CubeIDE, Cube MX, Keil, CCS, Arduino, ... 👉MQTT, Free RTOS, Zephyr RTOS 🚀 I can support your project from concept to production.

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded... Read more

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded processors and communication interfaces, as well as advanced signal and sensor integration. Key Skills: - Embedded processors: STM32, ESP32, TMS32, DM3730, DA14583, LoRa, nRF52, Arduino, Atmega, PIC, RAK4, SIM7 - High-speed routing up to 24 Gbps PCIe, SDI - Memory interface: SRAM, DDR, DDR2, DDR3, DDR4 - Communication: PCIe, SATA, HDMI, Ethernet, USB, UART, SPI, I²C, CAN, RS485/422, RS232C -Wireless: Bluetooth, Wi-Fi, Z-Wave, Zigbee, RFID Sensor integration: ECG, PPG, HRM, SPO₂, CO₂, Temperature, PIR, Touch, Pressure - Simulation tools: MATLAB, Proteus, Multisim, HyperLynx. My Advantages - Stable and reliable design - Fast and precise development - Deep industrial understanding - Safety and ergonomic awareness - Cost-effective manufacturing insight - Strong collaboration experience - High-quality prototype to product - Commitment to perfection Over a decade of successful embedded design experience, completing numerous projects across industrial, medical, and IoT applications. Proven ability to deliver top-quality results in minimal time through strong technical insight, practical design sense, and effective client collaboration.

I am a skilled PCB Design and Electronics Engineering professional with experience in schematic design, PCB layout, and embedded systems development. I specialize in creating high-quality, manufactura... Read more

I am a skilled PCB Design and Electronics Engineering professional with experience in schematic design, PCB layout, and embedded systems development. I specialize in creating high-quality, manufacturable PCB designs for Arduino, ESP32, IoT, automation, and electronic product projects. My services include: PCB layout and routing Schematic design Gerber and manufacturing files Multi-layer PCB design Component selection and BOM preparation 3D PCB visualization Prototype-ready circuit boards I work with tools such as KiCad, Altium Designer, EasyEDA, and Proteus to deliver clean and efficient designs with attention to detail and performance. I am committed to clear communication, fast delivery, and client satisfaction while helping businesses, startups, and individuals turn their electronic ideas into reality.

I am an Electronics and Communication Engineer with experience in electronic hardware design, PCB design, embedded systems, and IoT development. I specialize in designing reliable electronic circuits,... Read more

I am an Electronics and Communication Engineer with experience in electronic hardware design, PCB design, embedded systems, and IoT development. I specialize in designing reliable electronic circuits, creating professional PCB layouts, and developing embedded solutions using Arduino, ESP32, and microcontrollers. My technical skills include PCB design, circuit design, embedded programming, RF PCB design, IoT systems, industrial automation, and hardware debugging. I also have experience using Altium Designer, KiCad, CST Microwave Studio, and Proteus for schematic capture, PCB layout, and RF simulation.

I am Md. Sanowar Hossin, an Electrical and Electronic Engineer with 13+ years of experience in electronics R&D. I specialize in high-quality PCB design and embedded systems development. My expertise i... Read more

I am Md. Sanowar Hossin, an Electrical and Electronic Engineer with 13+ years of experience in electronics R&D. I specialize in high-quality PCB design and embedded systems development. My expertise includes advanced PCB layout using Altium Designer, KiCad, EasyEDA, and Eagle. i was completed more then 1000 PCB Design for my clients. I work with Analog, Digital, Power Electronics and Microcontroller based systems. I have a deep background in microcontroller programming, having successfully completed numerous projects using AVR and PIC architectures, specifically the PIC16F, ATmega8, and ATmega16 series. Additionally, I am highly proficient in developing IoT and wireless solutions using Arduino, ESP8266, and ESP32 microcontrollers. I provide for client: * PCB Design (Single-layer, Double-layer, Multi-layer) * Reverse Engineering * Schematic Design from physical boards or images * Gerber, BOM, and Pick & Place File * Arduino and Embedded Hardware and programming. * PIC/AT-Mega Microcontroller Based Embedded system Hardware and programming. * DFM (Design for Manufacturing) * Component Placement and Routing Optimization * Silkscreen, Drill Files, and Layer Stackups * ESP32 Design * Gerber Files I provide unlimited reviews for my client.

I am an Electronics Engineering graduate with hands-on experience in PCB design gained through a six-month internship at CRESTRONICS. During my internship, I received practical training in schematic c... Read more

I am an Electronics Engineering graduate with hands-on experience in PCB design gained through a six-month internship at CRESTRONICS. During my internship, I received practical training in schematic creation and multi-layer PCB layout design using Cadence Allegro. I have experience creating PCB footprints, performing component placement, routing signal and power traces, creating copper planes, and conducting Design Rule Checks (DRC). As part of my training, I completed a 16-layer PCB layout project containing approximately 2,000 components, which strengthened my understanding of PCB layout workflows and manufacturing considerations. **Technical Skills:** • Cadence Allegro PCB Designer • Multi-Layer PCB Layout • Footprint Creation • Component Placement • PCB Routing • Copper Plane Creation • Design Rule Check (DRC) • Schematic Reading • High-Speed PCB Design Fundamentals I am currently seeking opportunities as a PCB Design Engineer or Hardware Design Engineer where I can apply my skills, continue learning, and contribute to the development of high-quality electronic products.

Creative engineer with 11+ years of industry experience. Experience in circuit design, simulation, schematic capture, PCB layout, firmware development, 3D modeling and electronic manufacturing.

Creative engineer with 11+ years of industry experience. Experience in circuit design, simulation, schematic capture, PCB layout, firmware development, 3D modeling and electronic manufacturing.

I am a PCB Design Engineer specializing in electronic hardware development, schematic design, and professional PCB layout. I help turn concepts into reliable, manufacturable circuit boards by focusing... Read more

I am a PCB Design Engineer specializing in electronic hardware development, schematic design, and professional PCB layout. I help turn concepts into reliable, manufacturable circuit boards by focusing on performance, quality, and design standards. My experience includes designing multilayer PCBs, mixed-signal circuits, embedded hardware, power electronics, and production-ready documentation. I am skilled in schematic capture, component selection, PCB layout optimization, DFM/DFA practices, and generating manufacturing files such as Gerbers, BOMs, and assembly drawings. I work with engineers, startups, and product developers to create efficient hardware solutions from prototype to production. My goal is to deliver clean, reliable PCB designs that meet technical requirements and manufacturing needs. Core expertise: • PCB Design & Layout • Schematic Capture • Multilayer PCB Development • Analog & Digital Electronics • Embedded Hardware Design • Power Supply PCB Design • DFM/DFA Optimization • Gerber, BOM & Manufacturing Documentation

I am an experienced professional in Altium Designer software to design PCBs. I have done many industrial projects and basically, my background is of Research & Development in Hardware Design. I am a... Read more

I am an experienced professional in Altium Designer software to design PCBs. I have done many industrial projects and basically, my background is of Research & Development in Hardware Design. I am already experienced in designs like Power Electronics Design, GPS trackers, RF-based Security Systems, ESP module based cards, Custom boards as per one's demand, IoT based PCBs, Power Supplies, SMPS PCBs, High-Speed design PCBs and Reverse Engineering of a PCB,i.e, from Board to schematics. I recently developed many PCBs in compact sizes. So, I can help you with your projects which has size constraints also. So, this is my brief introduction to me and my work itself. I hope you get all the details. For further discussion, you can contact me via chat.

I am a Senior Electronic Engineer. I have more than 6 years of experience in - Electronic and PCB (Printed Circuit Board), PCB Layout, - RF design, - Mixed signal, Analog and Digital signal, High... Read more

I am a Senior Electronic Engineer. I have more than 6 years of experience in - Electronic and PCB (Printed Circuit Board), PCB Layout, - RF design, - Mixed signal, Analog and Digital signal, High-speed design, - Trace Length Matching, Differential Pairs, Hardware Design, Circuit Design, - PCB layout relate to PCI Express, Ethernet, DDR RAM, - Generate Gerber File for Manufacture and BOM ( Bill of material). Besides, I can provide 3D viewer of completed product. I can provide realistic PCB meet IPC standard. I can use the softwares below to design PCB proficiently: - Altium Designer version 17.1 - Eagle. - Pads Logic, Pads layout, Pads Router (Mentor Graphic). - Orcad Capture, Concept HDL, Cadence Allegro - Process in Cam350 (DownStream Technologies) or Genesis 2000 (Frontline PCB Solutions) - DFA, DFM, PCB Manufacture with IPC standard. - Can provide technical CAD drawing (autocad file). - Can order PCB with affordable cost. Firmware and Programming: - Keil C - MikroC - CCS PIC - IAR I can design IoT hardwares with Microcontroller for BLE, WIFI. - PIC - AVR - ARM - STM32 (STMicrocontroller) - MSP microcontroller series (Texas Instrument)

A reliable electronics engineer and PCB designer with 15+ years of experience (trusted by clients worldwide) in PCB design, schematic capture, hardware development, and manufacturing support. I delive... Read more

A reliable electronics engineer and PCB designer with 15+ years of experience (trusted by clients worldwide) in PCB design, schematic capture, hardware development, and manufacturing support. I deliver production-ready designs that reduce risk, shorten development cycles, and work right the first time. My PCB designs are not only functional but manufacture able, testable, and scalable. With my 100% Job Success Score, I help clients turn ideas into robust, production-ready electronic products. My specialization is in circuit design, schematic capture, multilayer PCB layout, embedded systems, power electronics, RF and microwave circuits and analog circuits. I can do design reviews, hardware development, hardware debugging, reverse engineering, design optimization, troubleshooting and ensure your project is delivered with precision and attention to detail. ⭐ Core Expertise ⭐ ✅ Multilayer PCB designing ✅ PCB design with high speed interfaces, such as LVDS, HS-CAN, CAN FD, RS-422, RS-485, USB 3.0, FPGA high speed SerDes, PCIe, LVPECL, LPDDR4 clock, HDMI ✅ High power PCB design up to 4 layers, 3.2 KW, 320V output at 10A load current ✅ Design for Manufacturing (DFM) & Design for Assembly (DFA) using JLC PCB and PCB way services ✅ EMC / EMI aware PCB design practice using industry standards such as IPC-2221, IEC61188, DO-254 ✅ JLC PCB and LCSC parts selection, finding in-stock components, creating BOM with updated and available parts, finding alternate parts with similar technical specifications ✅ Generating Gerber files, NC Drill files, CPL files, BOM files for production, prototyping & mass manufacturing ✅ Schematic and PCB design review ✅ Circuit Designing, analog, digital, RF, microwave, embedded, high power circuit designing ✅ Circuit Simulation & Analysis ✅ Microcontroller Programming in C language ✅ Reverse engineering from given Gerber files, PCB images, BOM ✅ Problem solving, hardware development, troubleshooting, hardware debugging, design optimization for power, thermal, mechanicals constraints ⭐ PCB Design Software ⭐ ✅ Altium Designer v24 ✅ KICAD v9 ✅ DIP TRACE ✅ EasyEDA ⭐ Circuit Simulation Software ⭐ ✅ LTspice ✅ Proteus ✅ Multisim ✅ Keysight ADS ✅ Ansys HFSS ⭐ Programming ⭐ ✅ MPLAB X IDE ✅ C Language ✅ MATLAB SIMULINK ⭐ 3D Mechanical Design ⭐ ✅ SolidWorks ✅ PTC Creo ✅ Flow Therm ⭐ Power & analog circuit Projects ⭐ Power electronics, op-amp circuits, ADC/DAC interfaces, signal conditioning, piezo electric transducer driver, flyback converter, buck boost converter, laser diode driver, LED light driver, constant current and PWM control of LED lights, Switch Mode Power Supply (SMPS) design, linear power supply design, switching transformer magnetics design, AC load control using TRIAC, DC load control using SCR, H-Bridge driver for BLDC motor control using high power MOSFETS, gate driver circuit, multivibrator circuit using 555 timer, counter circuits, relay control, IGBT circuit for DC to AC inverter, bridge rectifier circuit for AC to DC converter ⭐ Industrial Projects ⭐ Temperature, humidity, weight, pressure sensors circuit design for instrumentation electronics, data logging, real time telemetry monitoring, signal conditioning circuit, feedback control circuits, robotics and actuator control, solenoid valve for flow control, PLC, DCS, SCADA for industrial automation, ⭐ RF Projects ⭐ X-Band and S-Band microwave RF power amplifier using GaN and GaAs devices, preamplifier, Directional coupler, band pass filter, Wilkinson divider, diplexer, microstrip transmission lines impedance matching, Low Noise Amplifier (LNA), mixer, microstrip patch antenna, electronic beam steering T/R modules, I/Q modulator, phased array circuits ⭐ Audio Projects ⭐ Audio Electronics: Amplifiers, filters, DSP-based audio processing, low-noise analog design, analog crossover network, equalizer, stereo and mono dual channel amplifier, phono preamplifier, hydrophone amplifier, MEMS based microphone array design, electret microphone amplifier, CODEC, RCA to XLR converter, phantom power supply, audio power amplifier for 8 and 4 ohm loud speakers, ⭐ Digital Electronics Projects ⭐ Digital logic circuits using discrete ICs, sequential circuit, NAND Flash memory circuit, mixed signal circuit using RF transceiver blocks with SMA connectors, FMC HPC connectors, high speed signaling with FPGA Actel, Xilinx, DSP controller from microchip, microcontrollers from Silabs, PIC, ATMEL C8051, ATMEGA, TMS320F28335, ESP32-C5, ESP32-S3, STM32, RPI, ARDUINO ⭐ Why Clients Choose Me ⭐ ✅ End-to-End Capability — from concept → schematic → PCB → firmware → prototype. ✅ High-Speed PCB Specialist —Impedance controlled routing and EMC/EMI aware designs ✅ Strong Communication — clear documentation, regular updates, and fast responses. ✅ Proven Track Record — 15+ years of hands-on design experience. ✅ Client Satisfaction — long-term ▒▒▒▒▒▒ client relationships, repeat contracts, and 5⭐⭐⭐⭐⭐ feedback

1. 2D to 3D conversion 2.Thermal analysis on module level , board level and system level on ansys icepak 3.Good in Creo 3.0 part modeling, sheet metal, assembly, mechanism, animation, cabling,moldin... Read more

1. 2D to 3D conversion 2.Thermal analysis on module level , board level and system level on ansys icepak 3.Good in Creo 3.0 part modeling, sheet metal, assembly, mechanism, animation, cabling,molding Tool 4.Structural analysis 5.Design of SFF and LFF bracket and chassis assembly As per OCP 3.0 specification(Broadcom) 6.EMN/EMP creation in Creo for sharing it to ECAD Team & EMN/EMP verification. 7.plastic design, Good understanding of Plastic materials, B-side features creation used for Automotive trims applications 8.Fair Knowledge in fundamentals of sheet metal working and also on the design calculations and consideration 9.Experienced in understanding tooling feasibility studies, concept developments for sheet metal and plastic product development 10.Preparing mechanism and animation in creo parametric for better understanding of the concept.

Looking for a versatile engineer with a strong background in PCB design, 3D modeling, MATLAB, AutoCAD, and more? You've come to the right place. With extensive experience in electronics engineering an... Read more

Looking for a versatile engineer with a strong background in PCB design, 3D modeling, MATLAB, AutoCAD, and more? You've come to the right place. With extensive experience in electronics engineering and a keen eye for detail, I specialize in delivering innovative solutions that bring your ideas to life. PCB Design Expertise: Whether you're developing a simple circuit or a complex multilayer board, I excel in designing reliable and efficient PCBs tailored to your project needs. I focus on optimizing layouts for performance, manufacturability, and cost-effectiveness to ensure your product's success. 3D Modeling Skills: Using industry-standard software, I create precise 3D models that can be used for prototyping, visualization, and manufacturing. From conceptual designs to detailed models, my goal is to help you see your product come to life with clarity and accuracy. MATLAB Proficiency: My MATLAB skills allow me to tackle a wide range of technical challenges, from algorithm development and data analysis to complex simulations. If you're looking for someone who can turn your data into actionable insights, I’m ready to deliver. AutoCAD Mastery: With a deep understanding of AutoCAD, I can create detailed drawings, schematics, and technical plans that meet industry standards. I provide clear and accurate designs that are easy to interpret, ensuring seamless project execution. Beyond these core skills, I also offer services in firmware development, electronics consulting, and power supply design, bringing a comprehensive approach to each project. My process involves close collaboration, where I listen to your needs, offer strategic insights, and deliver results that exceed expectations.

I’m a PCB Design Engineer with over 10 years of professional experience in electronic hardware development. Throughout my career, I have successfully designed and delivered numerous industrial control... Read more

I’m a PCB Design Engineer with over 10 years of professional experience in electronic hardware development. Throughout my career, I have successfully designed and delivered numerous industrial control systems, IoT modules, communication boards, power electronics, and mixed-signal circuits From schematic conception and component selection to PCB layout, Gerber generation, DFM review, and prototype testing.

I’m a highly skilled PCB Designer & Electronic Engineer with years of experience in circuit design, embedded systems, and firmware development. I turn your concepts into production-ready, reliable, an... Read more

I’m a highly skilled PCB Designer & Electronic Engineer with years of experience in circuit design, embedded systems, and firmware development. I turn your concepts into production-ready, reliable, and efficient electronic solutions — from the first schematic to the final tested prototype. 💡 My Expertise Includes: PCB Design & Layout (Single-layer, Multi-layer, Rigid, Flexible, High-speed) Schematic Design & Circuit Simulation Embedded Systems Development (ESP32, STM32, Arduino, Raspberry Pi, AVR, PIC, ARM) IoT Solutions & Wireless Communication (Wi-Fi, Bluetooth, LoRa, Zigbee, GSM) Firmware Development (C, C++, MicroPython, Arduino IDE, PlatformIO) Prototyping & Testing PCB Manufacturing Files (Gerber, BOM, Pick-and-Place) Sensor Integration (Temperature, Motion, GPS, Pressure, etc.) Power Electronics & Battery Management Systems Analog & Digital Circuit Design Product Development for Mass Production 🛠 Tools & Software I Use: KiCad | Altium Designer | EasyEDA | Proteus | Eagle | OrCAD | SolidWorks (for enclosures) 🌍 Why Work With Me? ✔ Industry-standard quality ✔ Fast and reliable delivery ✔ Clear communication & regular updates ✔ Tailored designs that meet your exact requirements ✔ Post-delivery support and revisions Whether you need a small custom PCB, a complete IoT product, or complex industrial electronics, I can bring your project to life on time and within budget. Let’s design something amazing together!

PCB designer specializing in embedded systems and industrial IoT hardware with 2+ years of hands-on experience and 100+ completed projects. I work beyond schematics, contributing to system architectur... Read more

PCB designer specializing in embedded systems and industrial IoT hardware with 2+ years of hands-on experience and 100+ completed projects. I work beyond schematics, contributing to system architecture, power design, and platform selection to build reliable, manufacturable products. Experienced in mains-powered and battery-backed designs, low-power systems, cellular IoT, and compact, safety-aware PCB layouts. I design with DFM in mind, iterate based on real-world testing, and communicate clearly throughout the project.

I’m an Embedded Hardware Engineer with strong expertise in PCB design and embedded systems development. I design production-ready PCBs using Altium Designer and develop embedded software. Over the yea... Read more

I’m an Embedded Hardware Engineer with strong expertise in PCB design and embedded systems development. I design production-ready PCBs using Altium Designer and develop embedded software. Over the years, I’ve worked on projects such as: - 6-layer BLDC Motor Inverter PCB with CAN communication - Auto-Ranging Multimeter (hardware + firmware) - Custom Development Boards (ESP32-S3, TM4C123GXL, RP2040) My services cover PCB Design, Embedded Systems Programming (AVR, ARM Cortex-M, ESP32) I’m passionate about creating innovative and efficient hardware solutions that bring ideas to life.

I am a PCB Designer with hands-on experience in PCB layout, schematic design, circuit design, component placement, and routing. I specialize in Altium Designer and focus on creating accurate, efficien... Read more

I am a PCB Designer with hands-on experience in PCB layout, schematic design, circuit design, component placement, and routing. I specialize in Altium Designer and focus on creating accurate, efficient, and manufacturing-ready PCB designs. I can assist with schematic capture, PCB layout, routing, design optimization, and Gerber file preparation. I am detail-oriented, committed to quality, and focused on delivering reliable solutions that meet client requirements and project goals.

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Specia... Read more

Welcome to my profile. Following are my key expertise: 1. Over 10 years of experience in electronics circuit design, PCB design, Layout specializing in analog, digital and mixed signal systems. Special Mastery in ALTIUM. Executed more than 500 projects 2. Proficient in using industry-standard design tools such as Altium Designer, EAGLE, KICAD, EASYEDA and PROTEUS, ensuring accurate and efficient circuit development. 3. IPC Certified Symbols and footprints Creation, High Speed PCB Design upto 5GHz 4. Multilayer PCB Design experience upto 32 Layers, Impedance Control, Length Matching, Antenna Tuning, Blind Vias, Buried Vias, Through Hole Vias 5. DFX(Design for Excellence) - DFA, DFM and DFT. First Time Right PCB - 98% 6. Compact PCB Design, Signal Integrity, Power Integrity, Single Sided, Double sided placement 7. Design Verification through Design Checklists ensuring robust, reliable and quality design 8. Applications- IOT, Consumer, Medical, Industrial, Defense etc 9. Microcontroller Interfacing - STM32, STM8S, ESP32, ESP8266, NXP, TI chipsets etc 10. Wireless Products, Battery Operated, Low Power, Low cost 11. Design Optimization - Could optimize design of any product by at least 25% 12. Design for Quality, Design Review 13. PCB Prototyping, Contract Manufacturing 14. Firmware Development - ARDUINO, C, C++ etc 15. Enclosure Design, 3D Printing, Sheet Metal, 16. Production Support 17. EMI EMC Compliant Design - RE, EMHF, Surge, EFT, Burst, Impulse, 35KV 18. Standards Experience - UL, CISPER, CE, Please contact me if you would like to develop a robust and reliable product If you are looking to bring your idea to life, contact me :)

I am an Electrical Engineer specializing in electronic hardware and PCB design, with a focus on RF, high-speed interfaces, signal integrity, embedded systems, and manufacturable electronic products.... Read more

I am an Electrical Engineer specializing in electronic hardware and PCB design, with a focus on RF, high-speed interfaces, signal integrity, embedded systems, and manufacturable electronic products. I support both complete hardware development and focused engineering work such as PCB design review, troubleshooting, electromagnetic simulation, signal-integrity analysis, layout optimization, and preparation for manufacturing. My work covers the complete hardware development cycle, including system architecture, component selection, schematic capture, multilayer PCB layout, power architecture, prototype bring-up, debugging, validation, DFM/DFT, and manufacturing release. A recent project involved the electromagnetic analysis and optimization of a GMSL2 serializer-to-FAKRA PCB interconnect operating up to 6 GHz. I developed a KiCad-to-openEMS simulation workflow to evaluate S-parameters, return loss, impedance, transmission-line geometry, connector launches, via structures, anti-pads, and reference-plane discontinuities. I also develop embedded and industrial hardware using STM32 and ESP32 platforms, cellular connectivity, GNSS, LoRaWAN, CAN, RS-485, Ethernet, BLE, Wi-Fi, sensors, industrial interfaces, low-power electronics, and battery-powered systems. Typical projects I support include: — Complete schematic and PCB development — RF and high-speed PCB design — Multilayer and controlled-impedance layouts — PCB design review before fabrication — Existing hardware troubleshooting and redesign — Signal-integrity and electromagnetic analysis — Embedded and industrial IoT hardware — Power-management circuits — Prototype bring-up and validation — BOM optimization and component selection — DFM, DFT and manufacturing documentation I have experience across industrial R&D, freelance engineering, hardware validation, and test engineering, including two years in R&D at Furukawa Electric. My main engineering tools include KiCad, Altium Designer, openEMS, Python, EasyEDA Pro, and ParaView. I also maintain my own electronics bench with an oscilloscope, spectrum analyzer, soldering equipment, and rework tools for prototype assembly, bring-up, troubleshooting, and validation. My objective is not simply to complete a PCB layout, but to deliver hardware that is electrically robust, manufacturable, testable, and ready for the next stage of product development. If you have a new hardware design, a PCB approaching fabrication, or an existing board that is not performing as expected, I can review the requirements and recommend the most effective path forward.