Hire the best freelance Basic Simulation expert designers for your company

With 9+ years of PCB design experience, I specialize in Altium-based layouts, RF circuits, multi-layer boards (up to 8 layers), and FPGA integrations. Whether you need schematics, embedded system desi... Read more

With 9+ years of PCB design experience, I specialize in Altium-based layouts, RF circuits, multi-layer boards (up to 8 layers), and FPGA integrations. Whether you need schematics, embedded system designs, or help turning software concepts into production-ready hardware, I deliver quick-turn, cost-effective solutions. When you just need Another EE to get the job done, I’m here to help.

Senior Mechanical Design Engineer with over 10 years of experience in the OEM and ODM home appliance industry, gained entirely at a globally recognized leading manufacturer. Experienced in guiding pro... Read more

Senior Mechanical Design Engineer with over 10 years of experience in the OEM and ODM home appliance industry, gained entirely at a globally recognized leading manufacturer. Experienced in guiding products through all phases from concept design to mass production with a focus on mechanical design, DFM/DFA, and industrialization (NPI). Contributed significantly to the development and launch of the Philips Airfryer XXL in 2017, one of the earliest and most influential products in its category. Took dual responsibility as mechanical designer and NPI engineer, and was instrumental in solving critical ramp-up challenges that stabilized production and strengthened the Philips-Ernamaş collaboration. Later, led the mechanical design of the company’s ODM airfryer, followed by multiple facelifted models for local brands. Also played a cross-functional role in the Philips Air Steam Fryer project, managing communication across design, manufacturing, and global stakeholders during key project phases. In addition to these large-scale projects, provided targeted mechanical design support for various appliances including coffee machines, hand blenders, and mixers, especially during validation, prototyping, and tooling phases. Recognized for problem ownership, cross-disciplinary coordination, and delivering functional, manufacturable solutions under pressure. In total, I’ve taken part in the design or release of over 25 products, from airfryers to small domestic appliances, across both OEM and ODM collaborations.

I’m a self-driven and creative CAD designer who works mainly in Autodesk Inventor. I love turning sketches, ideas, or rough concepts into clean, production-ready 3D models. I also offer basic simulat... Read more

I’m a self-driven and creative CAD designer who works mainly in Autodesk Inventor. I love turning sketches, ideas, or rough concepts into clean, production-ready 3D models. I also offer basic simulation services, such as stress or airflow analysis, to help you understand how your design performs in the real world. Whether you need a part for prototyping, 3D printing, mechanical assemblies, or early concept visualization — I’m here to help. I work fast, communicate clearly, and I’m always focused on understanding the real problem before jumping to solutions. I’m still building experience professionally, so I keep my rates fair and flexible. What I can help with: 3D CAD modeling from sketch or idea Mechanical parts and assemblies Export to STEP, STL, IGES, DWG Design for 3D printing or manufacturing Basic simulation (stress or airflow analysis)

I’m a passionate Mechanical Design Engineer specializing in robotic systems and automation products. At Greenbotz Platform Pvt. Ltd, I’ve led the mechanical design for multiple innovative projects inc... Read more

I’m a passionate Mechanical Design Engineer specializing in robotic systems and automation products. At Greenbotz Platform Pvt. Ltd, I’ve led the mechanical design for multiple innovative projects including Educational Robots, Outdoor Patrolling Robots, Indoor Patrolling Robots, and humanoid robotic arms with 3D-printed components. Using SolidWorks as my primary design tool, I focus on creating functional, manufacturable, and efficient mechanical systems. I have strong problem-solving skills — from analyzing design flaws in earlier versions to developing simpler and more reliable solutions during fabrication and assembly.

Mechanical civil engineer experienced in 3D design and modeling using SolidWorks. I handle one-off projects including modeling, basic simulations, and technical drawings. Committed to delivering accur... Read more

Mechanical civil engineer experienced in 3D design and modeling using SolidWorks. I handle one-off projects including modeling, basic simulations, and technical drawings. Committed to delivering accurate and timely solutions.

Mechanical Design Engineer with experience in SolidWorks, Inventor, and COMSOL. I specialize in: 3D modeling of mechanical parts and assemblies 2D technical drawings for manufacturing Assembly desig... Read more

Mechanical Design Engineer with experience in SolidWorks, Inventor, and COMSOL. I specialize in: 3D modeling of mechanical parts and assemblies 2D technical drawings for manufacturing Assembly design and detailing Basic simulation and analysis I focus on accuracy, fast delivery, and clear communication. I am available for freelance work and ready to start immediately.

Hello All, This is Akash, senior design engineer having 11 years in new product development. I had great software proficiency in Auto CAD & Solid works. Dealing with, > New product Design / develo... Read more

Hello All, This is Akash, senior design engineer having 11 years in new product development. I had great software proficiency in Auto CAD & Solid works. Dealing with, > New product Design / development against customer inputs, standards etc., > Part Modelling, Sheet metal & Plastic design, > Assembly, BOM & Drawing creation & Rendering, > Basic simulation in SolidWorks I will always be with own sincere & hardworking attitude. I am always looking & striving to do something new. Thank you.. good day to all..

A Highly motivated engineering graduate with a passion for innovation in machine design and optimization. Proficient in SolidWorks, I specialize in creating detailed 3D and 2D models for machinery and... Read more

A Highly motivated engineering graduate with a passion for innovation in machine design and optimization. Proficient in SolidWorks, I specialize in creating detailed 3D and 2D models for machinery and systems, combining technical precision with creative problem-solving. My expertise extends to basic simulation techniques, enabling me to analyze and enhance machine processes for improved efficiency and productivity. With practical experience in factory supervision and academic research, I thrive in dynamic environments where I can apply my skills to deliver impactful solutions. Dedicated to continuous learning, I am eager to take on your challenging projects that pushes the boundaries of engineering design.

Hi! I’m a Mechanical Engineering student and freelance CAD designer with hands-on experience in SolidWorks, AutoCAD, and 3D modeling. I specialize in creating accurate 3D models, mechanical parts, ass... Read more

Hi! I’m a Mechanical Engineering student and freelance CAD designer with hands-on experience in SolidWorks, AutoCAD, and 3D modeling. I specialize in creating accurate 3D models, mechanical parts, assemblies, and technical drawings for manufacturing and 3D printing. My expertise includes: ✅ SolidWorks Part & Assembly Design ✅ 2D Drafting & Technical Drawings ✅ Product Design & Prototyping ✅ 3D Printing–Ready Models ✅ FEA & Basic Simulation Support I have successfully designed projects such as UAV landing gear mechanisms, brake pedal assemblies, and disc brakes, and even won 1st prize in a 3D CAD design competition. I am detail-oriented, deliver on time, and ensure client satisfaction with every project. *Let’s bring your ideas to life — feel free to message me to discuss your project!

I am a young, hard working, enthusiastic engineer and product designer who is eager to take on new challenges. I have a Bachelor of Mechanical Engineering (Honours) from the University of Auckland, fr... Read more

I am a young, hard working, enthusiastic engineer and product designer who is eager to take on new challenges. I have a Bachelor of Mechanical Engineering (Honours) from the University of Auckland, from which I graduated in 2017. I have 2 and a half years experience as a professional design engineer, where i have played a major role designing and manufacturing electromechanical 'smart' lockers, cabinetry, consumer electronic hardware and touch screen display kiosks. I also host hands-on fabrication experience, such a cutting, grinding and welding steel benches and trolleys. My services include (but are not limited to): • Concept design • Detailed design • CAD • CAM • 3D printing files • Technical drawings of individual components • Assembly drawings • Bill of materials • Materials and manufacturing recommendations • Basic simulations (FEA, CFD) • Product renders • Product animations • Instruction/assembly manuals • General design recommendations I possess great communication and problem solving skills enabling me work with clients from the start of a project until the end, ensuring you get the exact result you were after. I understand it can be hard to select the right freelancer so please don’t hesitate to ask any questions about myself or my background to aid your decision.

Detail-oriented and motivated 4th-year Mechanical Engineering Technician student at seeking an entry-level position in mechanical design or manufacturing. Possesses hands-on experience with AutoCAD an... Read more

Detail-oriented and motivated 4th-year Mechanical Engineering Technician student at seeking an entry-level position in mechanical design or manufacturing. Possesses hands-on experience with AutoCAD and SolidWorks, proficiency in creating 2D/3D visualizations and technical documentation, and a proven ability to contribute effectively in a professional design environment. Eager to apply academic knowledge and practical skills to support engineering projects. Education: Mechanical Engineering Technician, 4 курс обучения, Дата окончания: Jun 2026 Study location: Vladimir Aviation Mechanical College (VAMk), [Vladimir] Projects: Creation and subsequent design of the Hull for the system and the control system itself for small and medium-sized shipping based on the principle of signal transmission via LAN or (if necessary WiFi) Skills: CAD & Design Software: Proficient in AutoCAD (2D drafting, detailing), SolidWorks (3D modeling, assembly design, sheet metal, basic simulations - if used). Technical Documentation: Experienced in creating Engineering Drawings in all planes, Bill of Materials (BOM), Technical Specifications, Manufacturing Process Plans. Visualization: Strong ability in both 2D Drafting and 3D Modeling & Visualization for design communication and prototyping. Manufacturing Processes: Understanding of common manufacturing techniques (Mainly CNC milling and turning groups), as well as welding technologies, foundries and 3D printers Technical Skills: Reading and interpreting technical drawings, basic knowledge of mechanical components and systems, understanding of materials properties. Soft Skills: Attention to detail, problem-solving, ability to work independently and collaboratively, time management (especially considering studies/work balance), willingness to learn. Work experience: New Star Marine, Moscow Jun 2024 - Aug 2024 full time Responsibilities & Achievements: Created detailed 2D drawings and 3D models of ship components and structures using AutoCAD and SolidWorks. Developed and maintained technical documentation, including part drawings, assembly instructions, and Bill of Materials (BOM). Assisted in the development of manufacturing processes for specific parts, collaborating with production teams. Contributed to design reviews and incorporated feedback to improve manufacturability. Reason for Leaving: To fully focus on completing final year studies and academic requirements. Additional Information: Languages: Russian (Native), English (Intermediate+)

- Experience in 2D drafting using autocad, microstation and draftsight. - Lighting design simulation and lux level calculation using Dialux. - Cable sizing and load schedule, lightning protection and... Read more

- Experience in 2D drafting using autocad, microstation and draftsight. - Lighting design simulation and lux level calculation using Dialux. - Cable sizing and load schedule, lightning protection and earthing system. -Estimation and material specifications

*** What we do? *** 1/ Finite Element Analysis (FEA): - Predict product behavior through linear, nonlinear, thermal, and dynamic analyses - Estimate fatigue life and fracture propagation of produc... Read more

*** What we do? *** 1/ Finite Element Analysis (FEA): - Predict product behavior through linear, nonlinear, thermal, and dynamic analyses - Estimate fatigue life and fracture propagation of product - Analyse weld fatigue, vibration fatigue, low/high cycle fatigue, and composite fatigue - Optimise designs and validate product performance before production 2/ Computational Fluid Dynamics (CFD): - Inspect fluid flow, air flow, free surface flows (multiphase) - Analyse thermal management and heat transfer - Turbomachinery, turbulence and combustion - Fluid-Structure Interaction (FSI) and thermal FSI - Make faster and better decisions in the product development process 3/ Consulting Services: - Provide specialised solutions to engineering problems ranging from basic to complex analyses in the areas of structural analysis and fluid dynamics, applied mechanics and heat transfer. - Additional services include design verification/auditing, new product R&D, physics calculations. *** Why choose us? *** Our qualified services are the result of years of scientific study and international working experiences. The owner and experienced engineer, Tri Tien (Tri is pronounced as Tree), has more than 10 years in simulation and manufacturing industries, both in Australia and overseas. Before starting CAEbay, Tri had previously performed various roles as technical engineer, production & development engineer, and engineering head for many companies covering a range of industries including mechanical simulation, composite manufacturing, wood machining and fitness equipment manufacturing. Tri holds a Bachelor of Automotive and Engine Engineering from Ho Chi Minh City University of Technology, a Masters of Science from Konkuk University South Korea, and a PhD in Computational Engineering from University of Southern Queensland. Tri has published more than 15 peer-reviewed international journal articles and conference papers in the area of computational engineering. "CAE only delivers meaningful results if the engineer driving the computer fully understands the theory behind the simulation." *** What clients say? *** “It became clear that Tri has an unusual ability to computer model both physical objects and processes involving thermodynamics, movements of fluids and combinations of these.” Director Cliff Walker, Vacmobiles.com ltd., New Zealand. “We encountered some serious failure problems that halted our sales. Tri quickly identified the cause of the failures and invented a fail-safe substitution that allowed us to resume sales.” Thomas R. Anthony Ph.D, NAE., America. “With a very tenacious and robust problem solving ability, Tri was able to apply a deep technical knowledge into an array of projects to improve both existing systems along with the research into new areas of possible business.” David Pring, Managing Director, Timber and Laminate Services Pty Ltd., Australia.

A strong freelance FEA engineer combines technical knowledge with clear communication and reliability. The ability to perform accurate simulations and interpret results is essential. This includes ana... Read more

A strong freelance FEA engineer combines technical knowledge with clear communication and reliability. The ability to perform accurate simulations and interpret results is essential. This includes analyzing stresses in structures, studying vibration behavior through modal analysis, and understanding how systems respond to different loads. I do not only run simulations but also explain what the results mean and how the design can be improved. Proficiency with industry simulation tools such as ANSYS is another important strength. Being comfortable with modeling, setting up boundary conditions, creating meshes, and interpreting results allows an engineer to work efficiently and deliver reliable analyses. However, software skills alone are not enough; strong problem-solving ability is equally important. A good simulation engineer can identify areas where stress is concentrated, suggest design changes to improve strength or reduce weight, and help increase the durability or stability of a structure. I can do that for you Another valuable strength is the ability to verify and validate results. This involves checking simulations with basic engineering calculations, carefully reviewing boundary conditions, and identifying issues such as unrealistic stresses or modeling errors. Engineers who take the time to validate their work build greater trust with clients because the results are more dependable. Clear communication also plays a key role in freelance work. Clients often come from different technical backgrounds, so explaining results in a simple and organized way is very important. Providing clear reports, visual results, and practical recommendations helps clients understand the analysis and make better decisions about their designs.

am a Mechatronics Engineering student specializing in SolidWorks. I am passionate about solving mechanical challenges and continuously improving my CAD modeling skills. I offer high-quality 3D modelin... Read more

am a Mechatronics Engineering student specializing in SolidWorks. I am passionate about solving mechanical challenges and continuously improving my CAD modeling skills. I offer high-quality 3D modeling, technical drawing (2D), and basic motion simulation, ensuring precision and functional designs for every project.

"DESIGN" "DEVELOP" and "CREATE" ! ***** As a mechanical engineer i have a good knowledge of basic principles of engineering which i have learnt during my degree and during designing ,i keep in my m... Read more

"DESIGN" "DEVELOP" and "CREATE" ! ***** As a mechanical engineer i have a good knowledge of basic principles of engineering which i have learnt during my degree and during designing ,i keep in my mind that i better uses them while designing. skills:- *AutoCAD (2D & 3D). *solidworks (modelling,assembly,rendering,simulation and drawing) *Ms Visio check portfolio... :)

-Knows few 3d softwares such as Solidworks, Inventor and Catia v5 and also have a good hold of AutoCAD. -Have a basic knowledge of Analysis and Simulation. -Made a 3d prototype of CMM.

-Knows few 3d softwares such as Solidworks, Inventor and Catia v5 and also have a good hold of AutoCAD. -Have a basic knowledge of Analysis and Simulation. -Made a 3d prototype of CMM.

 Skill Areas  CAD Design  R&D & Process Development  New Product Development  Data Analysis  Advance Manufacturing (Smart tools, 3D printer and 3D Scanner etc.)  Domains & Industries ... Read more

 Skill Areas  CAD Design  R&D & Process Development  New Product Development  Data Analysis  Advance Manufacturing (Smart tools, 3D printer and 3D Scanner etc.)  Domains & Industries  Foundry Engineering in Pump and Motor Manufacturing  Semiconductor  Industrial Design / Product design  Smart Manufacturing / Additive Manufacturing  Technical Expertise  Advanced in CAD Modeling.  Best Knowledge in Excel & Design Automation in VBA  Well Experience in PLM and PDM and ERP software.  Basic Programming knowledge in VBA, Python, Mat lab.  Better knowledge in Graphic Design and Product Design  Interesting Knowledge in Big Data or Data Analysis for Research.  Tools used CAD tool PDM Technical Publication Programming Language  AutoCAD, Solid works, Creo, Fusion 360, On Shape, MAGMA 5.3(Simulation Software).  MS Office, Open Office, liber office, Adobe In Design (Basic)  VBA, Mat lab (Basic), Python(Basic)

I’m a Mechanical Engineer specializing in SolidWorks. I help clients turn ideas into functional, manufacturable products — quickly and accurately. What I can do for you : • 3D modeling of parts and as... Read more

I’m a Mechanical Engineer specializing in SolidWorks. I help clients turn ideas into functional, manufacturable products — quickly and accurately. What I can do for you : • 3D modeling of parts and assemblies • Concepts of conveying units and pick and place units • Fully defined technical drawings (GD&T, tolerances, BOM) • Sheet metal design • Weldments & structural frames • Basic Surface modeling • Basic Static Simulation (for structures) • Reverse engineering from sketches or photos • Design for manufacturing (DFM) improvements • Exploded views & animations (if needed)

As a mechanical engineer i have a good knowledge of basic principles of engineering which i have learnt during my degree and during designing ,i keep in my mind that i better uses them while designin... Read more

As a mechanical engineer i have a good knowledge of basic principles of engineering which i have learnt during my degree and during designing ,i keep in my mind that i better uses them while designing. skills:- *AutoCAD (2D & 3D). *solidworks (modelling,assembly,rendering,simulation and drawing) *Ms Visio

Hello ! I'm Andika, I Graduated as a mechanical engineering I have a strong background in the basic principles of mechanical & Structural engineering. I am proficient in using CAD software’s & Simulat... Read more

Hello ! I'm Andika, I Graduated as a mechanical engineering I have a strong background in the basic principles of mechanical & Structural engineering. I am proficient in using CAD software’s & Simulation tools, especially Autodesk Inventor & Solidworks. I hope will give you problem solving & services very well. Best Regards, Andika J.

I am a 6th-semester Mechanical Engineering student with experience in SolidWorks, Inventor, and basic knowledge of ANSYS for simulation. I have a strong passion for 3D modeling, mechanical design, and... Read more

I am a 6th-semester Mechanical Engineering student with experience in SolidWorks, Inventor, and basic knowledge of ANSYS for simulation. I have a strong passion for 3D modeling, mechanical design, and product development. My expertise includes CAD design, assembly modeling, and technical drawings. I am eager to work on freelance projects, helping clients bring their ideas to life with high-quality engineering solutions. Additionally, I have a basic understanding of manufacturing processes and finite element analysis (FEA). I am looking for opportunities to apply my skills and expand my experience in real-world projects.

I am able to work in- 1. Basic machining process part programming & machine practice(CNC milling, CNC Turning) 2. AutoCAD(2D Drafting, Solid modelling) 3. NX(Part modelling, assembly design, moti... Read more

I am able to work in- 1. Basic machining process part programming & machine practice(CNC milling, CNC Turning) 2. AutoCAD(2D Drafting, Solid modelling) 3. NX(Part modelling, assembly design, motion simulation, Drafting & Detailing) 4. CATIA(Part Modeling, Sheetmetal Design, Assembly design, DMU Kinematics, Drafting & Detailing and Machining) 5. CREO(Part modelling, Sheetmetal Design, Creo mechanism, Drawing & Detailing, Mold cavity design) 6. Ansys 7. Solidworks

My career is closely connected to science and computaional tasks.Algorithms from quantum mechanics, optical physics. solid body mechanics were implemented,optimized, tested and deployed in the early y... Read more

My career is closely connected to science and computaional tasks.Algorithms from quantum mechanics, optical physics. solid body mechanics were implemented,optimized, tested and deployed in the early years of my career. In the last 6 years my work has been focused on tutoring and consulting in Mathematics,Physics and Programming. I prepared pupils for finals and worked with college and university students. Previosly I worked in mid-sized tech-companies and corporate branches of IT enterprises. My areas of expertise covers: (1)In the field of General Engineering: -Optical physics -Physics of vibration -FE simulation, Abaqus, Nastran, FEMAP -Computational physics, some areas of Quantum physics ,DFTM (2)In the field of Software Engineering -Fortran -Python -Delphi -C++ -C (3)In the field of Quality Assurance -JIRA -Selenium (4)In the field of Data Analysis -Visual Basic for Automation -Excel -Statistics I have a Masters degree in Mathematic simulation and Software Engineering from Obninsk State University For Nuclear Power Engineering in Russia. Thank you for your time . I am looking forward to hear from you.

Works I had done:- A. Solidworks experience:- 1. CADed crank and piston arrangement of inline 4 engine. 2. CADed very basic rotating configuration of jet engine. 3.CADed a monocoque chassis 4.CADed ma... Read more

Works I had done:- A. Solidworks experience:- 1. CADed crank and piston arrangement of inline 4 engine. 2. CADed very basic rotating configuration of jet engine. 3.CADed a monocoque chassis 4.CADed main hoop bar similar to the one used in formula student. 5.CADed various mounts used in a car. 6.CADed a toothbrush (quite complex design). b. Autodesk Fusion 360 work:- 1.CADed a complete remote controller for a drone. 2.CADed drone landing gears in a team. 3. CADed a sapas12(gun) in a team of two. 4.CADed a lot of driving mechanisms used in mechanical engineer operations. 5.CADed a lot of 2d sketches. c. Ansys work :- 1. Ran various structural analysis simulations for the CAD designed.

I have 4 year experience in product design from Basic designs to industrial level Automotive Designing and simulations. At the same Time I have a teaching experience of 3 years in Mechanical enginee... Read more

I have 4 year experience in product design from Basic designs to industrial level Automotive Designing and simulations. At the same Time I have a teaching experience of 3 years in Mechanical engineering in the field of Thermal Engineering.

I am Shakir Istiak. I am 25 years old—five Years of experience as a mechanical engineering designer.I can Design any other thing with Solidworks. I think my basic level of CAD & CAE is very strong. 3... Read more

I am Shakir Istiak. I am 25 years old—five Years of experience as a mechanical engineering designer.I can Design any other thing with Solidworks. I think my basic level of CAD & CAE is very strong. 3D modeling using Solidworks, Catia, Autocad Rendering using Keyshot 6.0 Simulation using Ansys Static Structural analysis using Ansys FEA using Ansys Product design and development.