Hire the best freelance ASCON KOMPAS-3D expert designers for your company

Industrial designer. My field of activity: architecture and furniture, heat power engineering, power engineering.

Industrial designer. My field of activity: architecture and furniture, heat power engineering, power engineering.

Ph.D., structural engineer

Ph.D., structural engineer

I am a Mechanical Design Engineer with more than 5 years of experience in industrial equipment and manufacturing design. I specialize in SolidWorks 3D modeling, mechanical parts and assemblies, manufa... Read more

I am a Mechanical Design Engineer with more than 5 years of experience in industrial equipment and manufacturing design. I specialize in SolidWorks 3D modeling, mechanical parts and assemblies, manufacturing drawings, and engineering documentation. My experience includes designing underground storage tanks, separators, heat exchangers, air and gas receivers, and structural steel equipment used in the oil & gas and industrial sectors. I have developed projects from concept to production-ready documentation, including detailed drawings, BOMs, and engineering calculations. I work with SolidWorks, AutoCAD, and Compass, and I understand manufacturing requirements, welding, sheet metal, and fabrication processes. My goal is to deliver accurate, practical, and production-ready designs that can be manufactured efficiently. If you need reliable CAD modeling, mechanical design, or manufacturing documentation, I would be happy to help with your project.

I have been working as an engineer-designer for the past eight years, six of which have been at large production enterprises working in teams of successful and experienced engineers, carrying out both... Read more

I have been working as an engineer-designer for the past eight years, six of which have been at large production enterprises working in teams of successful and experienced engineers, carrying out both large and small projects. I am proficient in the development of light engineering units, various metal structures, sheet metal products, furniture, and have good knowledge of metal working methods. My skill set includes: 3D Design, rendering, drawings, and vector files. I also offer production support in the following areas: 1 - various metal structures including sheet metal structures 2 - equipment for machine tools of metal working 3 - conveyor equipment 4 - loft style furniture 5 - any type of CAD converting 6 - rendering

I am a Lead Mechanical Design Engineer with over 20 years of hands-on industrial experience. I specialize in designing non-standard equipment, complex metal structures, and hydraulic/pneumatic systems... Read more

I am a Lead Mechanical Design Engineer with over 20 years of hands-on industrial experience. I specialize in designing non-standard equipment, complex metal structures, and hydraulic/pneumatic systems from scratch based on client specifications. Unlike pure "CAD drafters," I have extensive experience working directly on manufacturing floors. I understand metal fabrication technologies (machining, bending, laser cutting, casting). This allows me to design not just functional parts, but technologically optimized parts that are cheap and easy to manufacture and assemble. I am ready to take on tasks of any complexity, providing complete turnkey project documentation (excluding electrical schematics). Primary CAD: SolidWorks, Kompas-3D; AutoCAD (base skills). CAD Agnostic: Capable of importing, analyzing, and converting files from ANY CAD system (STEP, IGES, X_T) and preparing them for manufacturing. Manufacturing Prep: Expert in sheet metal design, flat pattern creation, and DXF file generation for CNC laser cutting and bending. Optimal nesting to reduce material waste. Engineering: Mechanical design, complex metal structures, pressure vessels, hydraulic/pneumatic systems, and lifting equipment. Simulation: Structural and stress analysis (SolidWorks Simulation). Hardware: High-performance workstation (AMD Ryzen 9 5900X, 64GB RAM, Dual Monitors) – ready for heavy assemblies and complex computations without performance bottlenecks. Over two decades of industrial engineering experience, transforming concepts into manufacturingready products. Below is a snapshot of complex projects executed from concept to final documentation. Industrial Hydraulic & Marine Systems Designed a complex thruster/steering column assembly for marine applications. Developed full hydraulic schematic diagrams, pump blocks, and heat exchanger assemblies. Deliverables: 3D assemblies, detail drawings, BOMs, and manufacturing-ready DXF files.Pressure Vessels & Fluid Processing Plants Engineered adsorption units, generators, and ASME-standard pressure vessels. Designed complete piping and tubing routing for chemical and water treatment plants. Deliverables: 3D models, structural analysis, and laser-cutting DXF layouts for large-scale tanks. Medical & Surgical Equipment Designed precision instruments for endoscopic surgery (forceps, clamps, shavers, surgical saws). Developed ergonomic assemblies and internal mechanical layouts for medical devices. Deliverables: High-precision 3D models and tolerance-controlled 2D drawings. Custom Lifting & Accessibility Machinery Designed a full line of wheelchair lifts, including vertical lifts and multi-floor systems with complex trajectories. Calculated load capacities, safety factors, and drive mechanisms. Heavy Machinery & Foundry Equipment Designed a complete Lost-Foam Casting (LFC) complex, including large-format molds (2x2x2 meters). Developed new product lines for the plant, including custom screw conveyors and metal structures. � � � https://drive.google.com/drive/folders/1-26dMxaLEt00yYJyugCSjZ0iueBbkvYQ?usp=sharing

I design full-cycle mechanical engineering equipment: from concept and 3D modeling to the production of design documentation. I perform engineering calculations and mathematical modeling: —Strength;... Read more

I design full-cycle mechanical engineering equipment: from concept and 3D modeling to the production of design documentation. I perform engineering calculations and mathematical modeling: —Strength; —Solid particle dynamics; —Gas dynamics; —Heat engineering. I take into account the requirements of manufacturability, reliability, and ease of use. I develop both individual components and complete assembly units that are ready for production.

I am a hardworking, responsible and creative person. I am open to work with new projects connected with both design-related 3D-presentations starting from creation of 3D models to animation and render... Read more

I am a hardworking, responsible and creative person. I am open to work with new projects connected with both design-related 3D-presentations starting from creation of 3D models to animation and rendering, and mechanical engineering: calculations, development of drawings as well as 3D modeling (hydraulics, metal constructions, electromechanical equipment, dies, molds, mine equipment, concrete mixers, batching plants and other). I will dedicate all my skills and efforts to provide you with quality products.

Trained mechanical design engineer with finely tuned technical writing, analytical thinking, and collaborative skills. High level skills of using design software: SolidWorks, Autodesk Inventor, Komp... Read more

Trained mechanical design engineer with finely tuned technical writing, analytical thinking, and collaborative skills. High level skills of using design software: SolidWorks, Autodesk Inventor, Kompas 3D. 2+ years experience of working in machine-building industry. 5 years of industry-specific education Experience: MEDIA DISPLAY GROUP Design engineer (11.2017 - present) Creating prototypes using CAD software Calculation of production costs Researching whether the design will work and be cost effective Providing full project management process from the prototype development to manufacturing and logistics BILOTSERKIVMAZ LLC Deputy head of warranty service department (05.2017 - 11.2017) The workflow organisation Analysis of performance indicators of agricultural machines Preparing detailed reports BILOTSERKIVMAZ LLC Engineer of warranty service department (08.2015 - 05.2017) Providing customers support service Assembling of the machines and putting them into operation Developing of proposals for improving machines

Aerospace Engineer 30 years

Aerospace Engineer 30 years

Hi! My MAIN goal is satisfied clients. I`m good universal high skilled and experiened engineer and designer.I have experience in: -Architect design. -Interior design -Mechanical desig... Read more

Hi! My MAIN goal is satisfied clients. I`m good universal high skilled and experiened engineer and designer.I have experience in: -Architect design. -Interior design -Mechanical design. -Modelling for 3Dprinting. -Producing of metal and plastic parts. I work in such programs: Komaps 3D Solidworks 3D Autodesk 3dsMax Autodesk Maya Photoshop MathCad ESPRIT SpaceClaim LETS CREATE SMTH INCREDIBLE)

Professional skills: ● design and draft, technical and working projects, using modern means of automated design, modeling and simulation; ● creation of 3D CAD models, freeform modeling, parametric and... Read more

Professional skills: ● design and draft, technical and working projects, using modern means of automated design, modeling and simulation; ● creation of 3D CAD models, freeform modeling, parametric and solid modeling, modeling of assemblies of parts and elements; ● preparation of requests for materials and components, according to draft designs and technical specifications; ● knowledge of the USСD, development of metal detailing structures drawings based on draft designs and technical specifications; ● formation of cutting and models from drawings for the manufacture of blanks on CNC equipment; ● control of the manufacture of parts and assembly of equipment; skills in working with measuring tools: the ability to correctly select, configure and use various tools for accurate measurement of dimensions, geometric characteristics and other physical quantities. ● construction and development of graphic visualizations of objects in static, vector and animation formats based on concept art or photos, ensuring that all materials comply with company standards; ● freeform modeling, sculpting with significant accuracy; ● technical calculations: modeling and testing for stress points and structural integrity, calculation of structure loads; kinematic and dynamic analysis of joints and movements; hydrogasdynamic studies; temperature analysis; ● PC proficiency: Internet, MS Office, 1c:enterprise, Autodesk Fusion 360, Autodesk Inventor, Kompas 3D, AutoCAD, Photoshop, Blender 3d; ● interaction with representatives of third-party organizations in the process of performing job responsibilities; ● accounting proficiency; ● English language; ● management accounting and finance; ● personal methods and approaches to solving non-standard problems.

Mechanical Design Engineer | Development of Telecommunication and Electrical Equipment Mechanical Design Engineer with 10 years of experience in designing cabinets, racks, accessories for telecommunic... Read more

Mechanical Design Engineer | Development of Telecommunication and Electrical Equipment Mechanical Design Engineer with 10 years of experience in designing cabinets, racks, accessories for telecommunication, server, and electrical equipment, as well as products from related fields. Specializing in the development of functional, reliable, and technologically advanced designs that comply with industry standards and manufacturing requirements. Key Competencies: ✔ Design of cabinets and enclosures for telecommunication and electrical equipment ✔ 3D modeling and drafting (SolidWorks, Kompas-3D, AutoCAD, Fusion 360) ✔ Development of design documentation (ESKD) ✔ Optimization of designs for serial and small-batch production ✔ Working with sheet metal, composites, and other materials ✔ Collaboration with manufacturing teams and contractors ✔ Basic experience in 3D visualization and rendering (Blender, Fusion 360, Plasticity, KeyShot) I develop designs that combine ease of use, reliability, and compliance with modern standards. Always striving for design optimization and the implementation of new technologies. Open to professional challenges and exciting projects.

11.2012 – current: design engineer «Antonov Company». - Design and development of mechanical flight control system units AN-178, AN-132D (cylindrical, angular and planetary gearboxes, ball-... Read more

11.2012 – current: design engineer «Antonov Company». - Design and development of mechanical flight control system units AN-178, AN-132D (cylindrical, angular and planetary gearboxes, ball-screw lifts, disengaging coupling for aircraft control system); - Installation of sensors that control regulations of flight control system elements; - Support of mechanical units during manufacture and tests; - Design of circuit hydraulic pipe installation on the aircraft AN-178; - Quality control and service life extension of AN-124 flight control system; - Analysis of the design and testing of hydraulic units with reliability problems;

Senior Graphics Designer with deep expertise in CAD/CAM, architectural visualization, and technical drafting — turning complex ideas into precise, production-ready visuals.

Senior Graphics Designer with deep expertise in CAD/CAM, architectural visualization, and technical drafting — turning complex ideas into precise, production-ready visuals.

My proffessional CAD and 3D modelling experience more than 6 years. I present group of mechanical designer from LLC "UkrKazneftemash"

My proffessional CAD and 3D modelling experience more than 6 years. I present group of mechanical designer from LLC "UkrKazneftemash"

CAD designer with the use of NX, SolidWorks, AutoCAD. I develop models and drawings tooling, equipment, mechanisms. I know mechanical processing of metals, welding, bending, admissions and landings.

CAD designer with the use of NX, SolidWorks, AutoCAD. I develop models and drawings tooling, equipment, mechanisms. I know mechanical processing of metals, welding, bending, admissions and landings.

I am Premkumar Sankar, graduated Aerospace Engineering from Ukraine. Currently working in Aerospace firm as Aircraft Design Engineer. I've gained Hands-on-Experience on CAD and analysis Softwares l... Read more

I am Premkumar Sankar, graduated Aerospace Engineering from Ukraine. Currently working in Aerospace firm as Aircraft Design Engineer. I've gained Hands-on-Experience on CAD and analysis Softwares like ( SOLIDWORKS, CATIA V5 , CREO (Pro-E), Unigraphics Nx, AUTOCAD, ANSYS, Hypermesh) and Have Basic Knowledge on Manufacturing, Welding and CNC. I worked on University Projects for Students and worked with team of expats to design and Build the world's largest cargo Aircraft. Hence I Consider myself to be the best fit for this position. Please let me know, if you would like to know more information about me. I look forward to hearing from you.

I am a CAD Designer specializing in 3D modeling and 2D technical drawings for mechanical parts and manufacturing projects. I create precise and production-ready CAD models based on sketches, concepts... Read more

I am a CAD Designer specializing in 3D modeling and 2D technical drawings for mechanical parts and manufacturing projects. I create precise and production-ready CAD models based on sketches, concepts, or technical requirements. My focus is on delivering clean, accurate files that can be directly used for manufacturing, prototyping, or 3D printing. Services I provide: 3D modeling of mechanical parts and components 2D technical drawings with dimensions and tolerances Conversion of sketches, PDFs, or images into CAD models Preparation of manufacturing-ready files File formats I deliver: STEP (.stp / .step) DWG / DXF PDF drawings STL (for 3D printing) Tools I use: KOMPAS-3D (main CAD software) I focus on accuracy, clear communication, and fast turnaround time. My goal is to provide reliable CAD solutions that match engineering and manufacturing requirements.

I'm a PhD student currently working as an designer on Bogdan Motors. I would like to receive additional income that's why I'm searching for projects here. I use Creo, Catia, Solidworks, Kompas 3D. I... Read more

I'm a PhD student currently working as an designer on Bogdan Motors. I would like to receive additional income that's why I'm searching for projects here. I use Creo, Catia, Solidworks, Kompas 3D. I want to provide quality service for my clients using my skills.

Здравствуйте! Меня зовут Сергей, и я профессионально занимаюсь разработкой и редактированием чертежей, а также проектированием электрических схем. Что я предлагаю: Создание точных чертежей и электри... Read more

Здравствуйте! Меня зовут Сергей, и я профессионально занимаюсь разработкой и редактированием чертежей, а также проектированием электрических схем. Что я предлагаю: Создание точных чертежей и электрических схем любой сложности. Работа с проектами в AutoCAD и КОМПАС-3D. Оптимизация и исправление уже существующих чертежей. Подготовка документации для производств и монтажных работ. Мои преимущества: Профильное образование: Автоматизация технологических процессов и производств. Точное соблюдение стандартов и требований заказчика. Опыт работы с реальными проектами, включая электрические шкафы и автоматизацию. Внимание к деталям и ответственность за сроки. Почему стоит выбрать меня? Гарантирую качественный результат, который готов к использованию. Я открыт к любым корректировкам и обсуждению проекта. Ваши задачи будут выполнены эффективно, в срок и с учетом всех ваших пожеланий. Если вам нужно быстро и качественно выполнить проект, обращайтесь! Буду рад сотрудничеству.

My name is Ivan, and I am a professional design engineer, as well as a technologist with experience in the field of CAD design. I started my career in this field back in my student years, when I firs... Read more

My name is Ivan, and I am a professional design engineer, as well as a technologist with experience in the field of CAD design. I started my career in this field back in my student years, when I first came across the need to create drawings and models for my projects. Since then, I have been continuously improving my skills and knowledge to keep up to date with the latest trends and technologies in the field of design. In my work, I use various tools and programs to create accurate and detailed projects that meet all requirements and standards. I am always ready for new challenges and tasks, as well as for the exchange of experience and knowledge with colleagues. My goal is to help clients get high—quality projects that will meet their needs and expectations. I am confident that my experience and professionalism will allow me to create projects that will not only satisfy customers, but also become the basis for the successful development of their business. In addition, I am constantly monitoring new trends and technologies in the field of design in order to use them in my work and offer clients the most modern solutions. If you are looking for an experienced design engineer who can create a high-quality project for you, then I am ready to offer you my services. I am ready to work on projects of any complexity and scale, using all my knowledge and experience to achieve the best result.

I am a mechanical design engineer with 13+ years of experience in nuclear and heavy engineering, specializing in pressure/vacuum equipment, piping systems, experimental test rigs, high-temperature sys... Read more

I am a mechanical design engineer with 13+ years of experience in nuclear and heavy engineering, specializing in pressure/vacuum equipment, piping systems, experimental test rigs, high-temperature systems, and custom mechanical assemblies. I can support projects from concept to manufacturing drawings, including 3D CAD, design calculations, FEA coordination/review, GD&T, technical specifications, and prototype/manufacturing support. Core experience: Pressure vessels, vacuum chambers, piping and custom mechanical equipment Test rigs and experimental facilities for reactor component testing High-temperature liquid-metal systems, including molten lead applications SolidWorks / ANSYS / Mathcad / technical documentation Manufacturing-ready drawings, tolerances, assemblies and BOMs

I am a Structural Steel Detailer with experience in metal fabrication and structural engineering. I create accurate shop drawings, assembly drawings, and single-part drawings for steel structures incl... Read more

I am a Structural Steel Detailer with experience in metal fabrication and structural engineering. I create accurate shop drawings, assembly drawings, and single-part drawings for steel structures including PEMB (pre-engineered metal buildings), mezzanines, canopies, staircases, and handrails. What I deliver: - Shop drawings / fabrication drawings (PDF + DWG) - General arrangement (GA) drawings - Bill of Materials (BOM) and cut lists - DXF files for CNC plasma/laser cutting - AISC-compliant detailing Software I use: - AutoCAD (2D detailing) - SolidWorks (3D modeling) - ASCON Kompas 3D (3D modeling) I follow AISC and AWS D1.1 welding standards. I communicate clearly in English and meet deadlines. Let me know your project needs — I will provide a quote within 24 hours.

Aircraft Design Engineer with a Specialist degree (equivalent of BSc and MSc) in Aircraft Design & Engineering from Moscow Aviation Institute. Experienced in full-cycle conceptual aircraft developme... Read more

Aircraft Design Engineer with a Specialist degree (equivalent of BSc and MSc) in Aircraft Design & Engineering from Moscow Aviation Institute. Experienced in full-cycle conceptual aircraft development, from market analysis and preliminary sizing to aerodynamic validation, flight simulation, and propulsion concept design. Proficient in CAD and aircraft geometry development (Siemens NX, CATIA, OpenVSP), CFD and aerodynamic analysis (STAR-CCM+, SU2, ANSYS Fluent, XFLR5, Flow5), structural analysis (ANSYS Mechanical, Abaqus), and flight simulation (FoilMaker, PlaneMaker, X-Plane 11). Authored a diploma thesis on a high-capacity ultra-long-range passenger aircraft featuring an elliptical fuselage, crescent-shaped wing, and anti-shock bodies, with aerodynamic concepts validated through CFD investigations and flight simulation studies.

I'm a design engineer with 8 year experience and working on varios projects at product design studio. They included automotive, transport, medicine, packing, concepts and other electronic devices. To... Read more

I'm a design engineer with 8 year experience and working on varios projects at product design studio. They included automotive, transport, medicine, packing, concepts and other electronic devices. To achieve the desired result, I carry out design taking into account the future production technology. Therefore, I am deeply versed in such technologies as plastic injection molding, machining, welding, laser cutting, bending and other.

Mechanical Design Engineer with 3+ years of experience in manufacturing engineering, tooling design and product development. I specialize in mechanical design, CAD modeling, manufacturing documentati... Read more

Mechanical Design Engineer with 3+ years of experience in manufacturing engineering, tooling design and product development. I specialize in mechanical design, CAD modeling, manufacturing documentation and tooling development for production. I have experience with: • 3D parametric modeling • Mechanical assemblies • Manufacturing drawings • Tooling and fixture design • Production process development • Strength analysis (ANSYS) • Reverse engineering • Design for Manufacturing (DFM) During my work in a ropeway manufacturing company, I have participated in tooling development, production process planning, manufacturing engineering and equipment design. My projects include fixtures, bearing press tools, molds and various mechanical devices. I am proficient in SolidWorks, CATIA, Kompas-3D, T-FLEX CAD, Fusion 360, Siemens NX and ANSYS. I learn new software and technologies quickly and enjoy solving complex engineering problems. I can deliver: • CAD models • Manufacturing drawings • Assembly documentation • Tooling design • Engineering calculations • Prototype preparation • 3D-printable models