Hire the best freelance ANSYS APDL expert designers for your company

I major in four main areas: Solids Mechanics, Fracture Mechanics, Metal Additive Manufacturing (AKA 3D printing) and Finite Element Analysis. I have published 18 journal papers in high tier internati... Read more

I major in four main areas: Solids Mechanics, Fracture Mechanics, Metal Additive Manufacturing (AKA 3D printing) and Finite Element Analysis. I have published 18 journal papers in high tier international journals (to learm more, google using keywords: hai tran google scholar Embry-Riddle Aeronautical University). I have been using Computer Aided Design (CAD)/Finite Element Analysis (FEA) and coding (MATLAB/Python) tools for more than 12 years.

I am a Structural & Mechanical Analysis Engineer with advanced experience in finite element methods (FEA), composite structures, and mechanical design for aerospace, defense, and automotive applicatio... Read more

I am a Structural & Mechanical Analysis Engineer with advanced experience in finite element methods (FEA), composite structures, and mechanical design for aerospace, defense, and automotive applications. I hold a bachelor’s degree in Mechanical Engineering and I am currently pursuing a master’s degree in Solid Mechanics. I specialize in the complete structural analysis workflow, including geometry preparation, meshing, composite layup modeling, load definition, contact modeling, result evaluation, and engineering reporting. I have strong hands-on experience with ANSYS Mechanical, APDL, SpaceClaim, Ansys Composite Pre-Post, and MSC Apex. My technical expertise includes: • Linear & nonlinear static analysis • Modal, buckling, frequency, and vibration simulations • Composite material modeling, failure criteria, and damage tolerance • Contact, meshing optimization, and complex assembly preparation • Load case development and structural performance evaluation • APDL scripting and automation of analysis processes • Weight estimation, optimization, and structural improvement studies Selected project experience: • Structural analysis of UAV components (wings, tails, fuselage sections, brackets, landing gear) • Composite layup modeling and strength evaluation for aerospace structures (AKINCI, TB-3, KIZILELMA) • Modal and damage resistance analysis of avionics brackets and landing gear components • Flow simulation over NACA airfoil using RBVMS formulations • Crash management system optimization for automotive applications • Flight control surface and actuator design, dynamic modeling, and system simulation • Rocket launch and landing equations and dynamic modeling studies I am highly detail-oriented, analytical, and passionate about solving complex engineering problems. My goal is to deliver precise and reliable FEA results supported by clear technical documentation and practical engineering recommendations. If you need professional support in structural analysis, composite structures, FEA modeling, or mechanical design, I can help you achieve accurate and high-quality results.

Experienced in SolidWorks, AutoCAD, Inventor, and ANSYS — offering 3D product design, engineering drawings, simulation, and design optimization.

Experienced in SolidWorks, AutoCAD, Inventor, and ANSYS — offering 3D product design, engineering drawings, simulation, and design optimization.

Design and Production Engineer with over 4 years of experience in R&D-led Electro-Mechanical engineering and deep-tech product design. Expert in 3D modeling and CAE simulation using CATIA V5, ANSYS, a... Read more

Design and Production Engineer with over 4 years of experience in R&D-led Electro-Mechanical engineering and deep-tech product design. Expert in 3D modeling and CAE simulation using CATIA V5, ANSYS, and Blender. I have a proven track record leading design-to-production for complex systems, including drones, EV bus prototypes, and utility-scale solar projects exceeding 40MW. I specialize in ensuring product reliability through FEA/CFD validation and optimizing manufacturing processes.

Strong Knowledge about the mechanical 3D as well as 2D designing Software. doing any complex design. I did my graduation from Techno Engineering College Banipur in 2020 under MAKAUT. I specially doing... Read more

Strong Knowledge about the mechanical 3D as well as 2D designing Software. doing any complex design. I did my graduation from Techno Engineering College Banipur in 2020 under MAKAUT. I specially doing Master's in CAD/CAM/CAE from MSME TOOL ROOM KOLKATA in 2021.

I am a Mechanical Engineering undergraduate with a Diploma in Mechanical Engineering (CGPA 3.85), passionate about design, simulation, and problem-solving. My strengths include proficiency in AutoCAD,... Read more

I am a Mechanical Engineering undergraduate with a Diploma in Mechanical Engineering (CGPA 3.85), passionate about design, simulation, and problem-solving. My strengths include proficiency in AutoCAD, Inventor, ANSYS, MATLAB, and CATIA, which I use for CAD modeling, drafting, and engineering analysis. I have hands-on experience through internships in construction projects (mechanical systems, BOQ, and tender documentation) and at Normah Medical Specialist Centre (maintenance, troubleshooting, and technical reporting). Additionally, I have worked on freelance 3D printing projects, designing functional and customized CAD models tailored for manufacturing. I bring persistence, attention to detail, and a commitment to delivering accurate, efficient, and client-ready designs. I am eager to collaborate on projects that challenge my technical abilities and allow me to contribute meaningful engineering solutions

A team that comprises Master's Degree holders in Naval Architecture, Structural Analysis, and Hydrodynamics, with each member bringing over 5 years of Shipyard experience in Naval Architecture and Mar... Read more

A team that comprises Master's Degree holders in Naval Architecture, Structural Analysis, and Hydrodynamics, with each member bringing over 5 years of Shipyard experience in Naval Architecture and Marine Engineering, creating a strong foundation in FEA, CFD, CAD Drawings, and 3D Modeling. Services: Naval Architecture & Ship Design full package / Finite Element Analysis (FEA) / Computational Fluid Dynamics (CFD) / CAD Drawings / 3D Modeling. Software: ANSYS, STAR CCM+, MAXSURF, SHIPCONSTRUCTOR, AUTOCAD, RHINO 3D, SOLIDWORKS, MATLAB, CAESES, AUTODESK INVENTOR, PYTHON, and PRIMAVERA.

Computational physicist and R&D scientist with a PhD in Physics and 10+ years of experience applying numerical modeling, FEM/CFD simulations, and machine learning to complex real-world problems. I spe... Read more

Computational physicist and R&D scientist with a PhD in Physics and 10+ years of experience applying numerical modeling, FEM/CFD simulations, and machine learning to complex real-world problems. I specialize in turning physics-based models into robust, efficient, and well-documented computational solutions. My work spans heat transfer and thermal systems, multiphysics simulations (Ansys, COMSOL), and AI-accelerated modeling, including Physics-Informed Machine Learning and surrogate models to reduce simulation time without sacrificing physical accuracy. I also develop custom Python-based tools and software interfaces that automate and extend commercial solvers. I am highly comfortable working at the intersection of science, engineering, and software, and I place strong emphasis on clear communication, documentation, and reproducible workflows. Whether you need advanced simulations, data-driven modeling, or technical content that bridges theory and implementation, I deliver precise, reliable results. Core skills: FEM/CFD · Ansys · COMSOL · Python · Machine Learning · Physics-Informed ML · Heat Transfer · Scientific Computing · Technical Documentation

I am a specialist engineer with over 16 years of international experience in finite element analysis (FEA), CAD modeling, and structural engineering of wind turbine blades, FRP composites, and bolted... Read more

I am a specialist engineer with over 16 years of international experience in finite element analysis (FEA), CAD modeling, and structural engineering of wind turbine blades, FRP composites, and bolted joints. My career has been dedicated to solving highly complex structural challenges in renewable energy, with a strong track record in both consulting and hands-on engineering for OEMs in Europe, China, and India. My expertise covers the full cycle of structural development: from design and optimization using FEA, to certification and compliance with international standards, to damage analysis and retrofitting of existing components. I am recognized as an FEA expert, with advanced skills in ANSYS (Workbench, APDL, ACP), RFEM, Abaqus, and Nastran, and I have led the certification of more than 200 wind turbine components and over 50 rotor blades. Beyond analysis, I am also a developer of proprietary engineering tools that streamline and automate structural calculations. These tools have significantly improved efficiency, accuracy, and reliability in structural evaluation and certification processes for my clients. Alongside FEA expertise, I bring strong CAD and 3D modeling skills with ANSYS Discovery, ANSYS SpaceClaim, NX, Creo, and CATIA, enabling me to support projects from initial concept models through to advanced simulation and certification documentation. I hold a Master of Science in Mechanical Engineering (Bremen University of Applied Sciences, Germany) and a Master of Science in Process & Energy Technology (Bremerhaven University, Germany), complemented by postgraduate studies in Wind Energy (Gotland University, Sweden). Fluent in English, German, and Spanish, I work comfortably in multicultural and cross-functional teams, coaching peers and delivering solutions that combine technical rigor with business impact. I help clients achieve optimized, certifiable, and reliable designs through advanced simulation, structural analysis, and CAD/FEA integration. Whether you need concept development, detailed simulation, or certification support, I deliver engineering services that reduce risks, shorten development cycles, and ensure compliance with global standards.

I am persuing B. Tech in Mechanical Engineering at KALYAN GOVERNMENT ENGINEERING COLLEGE. I am a summer intern at IIT KHARAGPUR.I am also an intern at VECC, KOLKATA. my favourite subjects are Mechanic... Read more

I am persuing B. Tech in Mechanical Engineering at KALYAN GOVERNMENT ENGINEERING COLLEGE. I am a summer intern at IIT KHARAGPUR.I am also an intern at VECC, KOLKATA. my favourite subjects are Mechanics, Thermodynamics, Strength of Materials.

I help engineering companies handle peak workloads in advanced FEM analysis and offshore structural analysis. My services: - fixed-price validation, modeling, calculation packages - fixed-price calcul... Read more

I help engineering companies handle peak workloads in advanced FEM analysis and offshore structural analysis. My services: - fixed-price validation, modeling, calculation packages - fixed-price calculation reports, - project support services. All analysis for Offshore Structure (Jacket, Topside) by SACS. Finite Element Analysis by ABAQUS and ANSYS APDL or WB. Successful Past Projects: FEED CORAL FLNG, Greater Tortue Ahmeyim (GTA) , BUZIOS P79 FPSO, KAMINHO FPSO, EPR 2 HPC, NEDO FLOATING WIND DEMONSTRATOR PROJECT

Hey everyone, I'm a design engineer who likes to build creative designs while ensuring technical aspects from a mechanical perspective. Although I'm new to this environment, having no prior experience... Read more

Hey everyone, I'm a design engineer who likes to build creative designs while ensuring technical aspects from a mechanical perspective. Although I'm new to this environment, having no prior experience in the current market as a design engineer, I'm an enthusiastic person eager to learn about current market design problems and develop practical skills through iterative design, ensuring everything goes perfectly well. I'd love to stay connected and hear from you, as I believe communication is key to growth and collaboration.

I have experience in ANSYS APDL, Solid works,Fusion 360 and Inventor. I am a Mechanical engineering student currently in my final year.

I have experience in ANSYS APDL, Solid works,Fusion 360 and Inventor. I am a Mechanical engineering student currently in my final year.

I have solid command on technologies, tools and best practice in Design and Finite Element Analysis of Mechanical Equipment using Solidworks and Ansys.

I have solid command on technologies, tools and best practice in Design and Finite Element Analysis of Mechanical Equipment using Solidworks and Ansys.

Mechanical Engineering PhD candidate with experience in mechanical design support, CAD modelling, finite element analysis, materials research, experimental testing, and technical documentation. My bac... Read more

Mechanical Engineering PhD candidate with experience in mechanical design support, CAD modelling, finite element analysis, materials research, experimental testing, and technical documentation. My background combines research and applied engineering work in nanofiber materials, polymer systems, mechanical characterization, prototype support, and simulation-based problem solving. Skilled in SolidWorks, AutoCAD, ANSYS Workbench, and ANSYS APDL. I can support clients in CAD modelling, engineering drawings, research-based technical work, simulation support, materials-related projects, report writing, and product development documentation.

* Masters in Mechanical Design Engineering. * Internship at Cummins India as a Design and Analysis Intern. * Proficient in SolidWorks, Creo, ANSYS, BOM, Windchill and Design Review.

* Masters in Mechanical Design Engineering. * Internship at Cummins India as a Design and Analysis Intern. * Proficient in SolidWorks, Creo, ANSYS, BOM, Windchill and Design Review.

I am an expert in SolidWorks, Fusion360, AutoCAD, FreeCAD, etc. I also have knowledge in ANSYS CFD, ANSYS Fluent, ANSYS CFX, ANSYS APDL, OpenFOAM, SU2, etc; simulation software. Also an expert in Desi... Read more

I am an expert in SolidWorks, Fusion360, AutoCAD, FreeCAD, etc. I also have knowledge in ANSYS CFD, ANSYS Fluent, ANSYS CFX, ANSYS APDL, OpenFOAM, SU2, etc; simulation software. Also an expert in Design for Additive Manufacturing (DfAm) I provide excellent quality of design work to my clients as per their requirements within deadline and also provide unlimited revision/free sample. I'm well trained in Part/3D Modeling, Surface Modeling, Mold, Sheet Metal, Weldments, and Assembly. I will provide end-to-end support in Product Designing right from ideation to development and design enhancement.

Myself vivek and i am an aspiring mechanical engineer from india have relevant skills like solidworks,catia,ansys and creo my strengths are my skills,interpersonal skills

Myself vivek and i am an aspiring mechanical engineer from india have relevant skills like solidworks,catia,ansys and creo my strengths are my skills,interpersonal skills

We are a team of 5 people with broad areas of expertise, including Product Design, Mechanical Engineering Design, Finite Element Analysis, and structural and fluid simulation. We can handle projects w... Read more

We are a team of 5 people with broad areas of expertise, including Product Design, Mechanical Engineering Design, Finite Element Analysis, and structural and fluid simulation. We can handle projects with high standards and negotiable prices.

I am a fresh graduate with B. Tech in Industrial & Production engineering. I love sketching and photography since childhood and this allows me to be creative and have a better visualization. I am qui... Read more

I am a fresh graduate with B. Tech in Industrial & Production engineering. I love sketching and photography since childhood and this allows me to be creative and have a better visualization. I am quite interested in CAD and hence exploring my way. I have fair bit of technical knowledge and well versed with Fusion 360, Catia V5, Autocad, and ANSYS APDL. I don't have a professional experience in design yet but I believe I have an eye for design and willing to learn. I would be really glad to help you out with your designs and projects.