Custom Case
in 3D Printing Design
held by Dwizzle2k9
Contest Ended, Winner(s) have been selected.
Description:
I currently have absolutely no images, or sketches. I do have measurements for what i'm looking to get the hardware designed for. This is a computer with a different shape. What you will have to keep in mind, the hardware is up gradable, so what you will have to make sure is all of the hardware is easy to access the hardware, take it out, and add new hardware, and also easy to open when needed. The hardware need to be designed within a 15L x 10W x 3H hexagon. The 3 main things to keep in mind is the size of the hexagon shaped pc, easy to open the pc, and easy to take the hardware out and replace it when needed. The hardware for the PC will be Intel, and AMD CPU and GPU, also make sure there's enough room for the graphics card, some are big. Oh I almost forgot please make sure there's enough storage room. There will be a limited amount of memory onboard, so there has to be enough room for extra storage. Also there will be no disk drive onboard, so that will eliminate some unwanted space.
Wants:
Colors are up to you. Remember the sizes. Also keep in mind there will be no power button. Only touch. This is more of a console look.
Ask for Sample:
Finish one as a sample, then the best designer will complete the project.
Software:
- 3D Printing
- Cinema 4D
Additional Information
Also the button on the case has to light up when it's turned on. Also I would like for you to add a logo. Here's the link to the image.
https://www.dropbox.com/s/xq4qv6e206oqc98/Aeon_Sharp_Black_2750.png?dl=0
Prepaid Prize
Entries
#5 hex.cpu
by pMohanmech
hi
Find the model, if it is ok i will send you the detailed drawing.
Find the model, if it is ok i will send you the detailed drawing.
2015-02-15 14:24:27
#9 Hexagon Custom Case
by Mansi
Hexagon Custom Case
Single Frame (orange)
The model includes all 5 easily detachble panel (In black)
Built in Carry handle
Easy accessibility for the accesorries & Start button (USB, Microphone/ Headphones)
Extra storage room available even after slots for AMD CPU, GPU, fan , graphic card
Single Frame (orange)
The model includes all 5 easily detachble panel (In black)
Built in Carry handle
Easy accessibility for the accesorries & Start button (USB, Microphone/ Headphones)
Extra storage room available even after slots for AMD CPU, GPU, fan , graphic card
2015-02-17 23:25:48
#10 custom case
by vinya
HI!
if you like the case shape we'll furtheron this.
Thanks,
vinya
if you like the case shape we'll furtheron this.
Thanks,
vinya
2015-02-18 06:16:12
#12 AEON HEX - Custom Case Concept Design
by EJB CAD SOLUTIONS
A Console style and feel to a computer case. Dimensions are 15L X 15W X 3H. Compact design, however this case is designed for custom internal components meaning that the internal space inside can be utilized and orientated to suit the chosen components. Has enough space to fit along the width a GTX Titan GPU. Suggested that the PSU is housed externally to reduce heat, create airflow and to reduce noise. Incorporates Aeon logo as requested and also utilizes a touch start button.
A modern look from the hexagonal shape hence the title Aeon Hex, designed with Gamer's in mind.
Design dimensions could change depending on components that would eventually be used.
A modern look from the hexagonal shape hence the title Aeon Hex, designed with Gamer's in mind.
Design dimensions could change depending on components that would eventually be used.
2015-02-19 14:48:58
#13 custom case
by vinya
HI!
i have added little glass portion to display fan that grafic card has, it looks beautiful to me let me know what you think,we can have all sides of octagon collapsible to accommodate more hardware also make this case more compact.
Thanks
vinya
i have added little glass portion to display fan that grafic card has, it looks beautiful to me let me know what you think,we can have all sides of octagon collapsible to accommodate more hardware also make this case more compact.
Thanks
vinya
2015-02-20 01:56:09
#14 custom case glossy
by vinya
glossy look, please make this contest prepaid if you wish to see more entries from other designer as well.
Thanks,
vinya
Thanks,
vinya
2015-02-20 02:00:35
#15 Custom
by Irfan
Concept design, If you like , I will add more features in it.
Have more concepts.
alphacad.tk
Have more concepts.
alphacad.tk
2015-02-20 11:00:13
#17 Computer case
by Taavi
This computer case is easy to open, just unlock and lift the top case from the bottom. All the CPU components will stay in the bottom of the case. This makes CPU easy to customize.
Name on the top case will light up if letter "o" from the name will be touched and computer starts-up.
If my design wins, then i will adjust everything according to your wishes and finish this product to fully working and manufacturable product.
Name on the top case will light up if letter "o" from the name will be touched and computer starts-up.
If my design wins, then i will adjust everything according to your wishes and finish this product to fully working and manufacturable product.
2015-02-20 13:47:00
#22 Hexite render image.
by zulfadzryl
Screenshot are watermarked.
Attachment are without watermarked.
Attachment are without watermarked.
2015-02-21 12:05:28
Discussion
Yes décalage horaire .....
Enter after closing date...is it eligible?
Hi!
I understand i'm little bit late for the dinner, but dimensions are in inches, right?
I understand i'm little bit late for the dinner, but dimensions are in inches, right?
Hexagon's is the theme of the interface. I'm not stuck on a hexagon alone. If you have other shapes that's fine also.
Excuse me, but why do you insist on hexagon , i think there are much more fascinating designs than the hexagon shape
Rohith Kalyanaraman- I would need the whole cpu, no monitor.
DesignerRavi- I would ultimately need a full manufacturing model. My company is looking for new designs from what we have. Our old designs aren't up to par with most hardware out there. Also Plastic design is more of what i'm looking for.
DesignerRavi- I would ultimately need a full manufacturing model. My company is looking for new designs from what we have. Our old designs aren't up to par with most hardware out there. Also Plastic design is more of what i'm looking for.
Mr.Manuel Rosso
Has a good queries too.
keeping heat dissipation in mind is also a very good design aspect for cpu to run in long hours.
Has a good queries too.
keeping heat dissipation in mind is also a very good design aspect for cpu to run in long hours.
plastic design or sheet metal.
in plastic i can give more designs than in sheet metal.
please update to know.
Thank you.
in plastic i can give more designs than in sheet metal.
please update to know.
Thank you.
i have idea and, i will try doing and sending it before the given date.
but my questions are.
1. Do company need new design.
2. Concept design is fine or the fully manufacturing model needed?
3. I will design in solid works so can you tell me in which format i need to send it.
# i can send the files and power point presentation.
but my questions are.
1. Do company need new design.
2. Concept design is fine or the fully manufacturing model needed?
3. I will design in solid works so can you tell me in which format i need to send it.
# i can send the files and power point presentation.
I have a doubt reg the hardware.. u Need only the CPU unit or the whole PC with monitor, keyboard and stuffs..?
The size of the motherboard depends on the final dimensions of the case. The motherboard will be custom.
Everything will be custom. The only thing that isn't is the hardware choice. Graphics can fit all GTX graphics cards. from a 550 to a titan, and most AMD graphics.
There will be no touch screen on the case. The only thing that's touch is the power button. It has to have a light. Heres a link to the logo. I would like this to be on the case also:
https://www.dropbox.com/s/xq4qv6e206oqc98/Aeon_Sharp_Black_2750.png?dl=0
Everything will be custom. The only thing that isn't is the hardware choice. Graphics can fit all GTX graphics cards. from a 550 to a titan, and most AMD graphics.
There will be no touch screen on the case. The only thing that's touch is the power button. It has to have a light. Heres a link to the logo. I would like this to be on the case also:
https://www.dropbox.com/s/xq4qv6e206oqc98/Aeon_Sharp_Black_2750.png?dl=0
Just for clarification, please indicate:
a - the type (form factor) and size of motherboard.
b - the type and size of power supply
c- fan/fanless
d: type and size of Graphic card
e- dimensions and form of the touchscreen
f- connectors required: USB, HDMI, power, etc.
Is it for making one of, or to make more units?
a - the type (form factor) and size of motherboard.
b - the type and size of power supply
c- fan/fanless
d: type and size of Graphic card
e- dimensions and form of the touchscreen
f- connectors required: USB, HDMI, power, etc.
Is it for making one of, or to make more units?
Similar Contests on Cad Crowd
Design an Extraordinary Cabinet Knob or Pull
I own Knobs.co, a retail cabinet hardware site. I want to manufacture a line of unique, 3D printed cabinet hardware. This contest is for the design for one cabinet knob or pull. However, should I find a designer whose work I like, there could be far more work following. The final knobs will be produced in metal. They will need to be strong enough for daily use, stunning to look at, and capable of being screwed into a cabinet, which means they should have a threaded screw hole capable of receiving an 8-32 screw. The knob diameter can be anywhere between 1 1/4 inches and 1 1/2 inches. Also, the final piece needs to be capable of being submitted directly to Shapeways, and conform to all of their criteria for strength, wall thickness, etc. I'm not a techie, so if I have to modify anything to upload it, the knob is never going to get made.
Need 3D image of ambulance designed for 3D printing
As a gift to a donor, we want to give them a 3D replica of a custom ambulance that they donated. Going to be 1:43 scale.
All Terrain Chassis for Camera Crane
I am interested in designing, prototyping, and constructing an all terrain chassis for a camera crane. Contact me with questions or if you cannot open the links provided below.
Please view our website to see the crane
CraneShot.com
Please view this video for a rough analogy of the chassis we want
YouTube.com/embed/oXz0Nlt1WJE?rel=0
Thank you,
Zoe Skontos
CraneShot
Los Angeles, CA
USA
zskontos@gmail.com
+1.310.902.9172
1:64 Model - CAD Designer to Scale Down Model for 3D Printing
Tankcar to be done in 1:64 scale.
Air Dump 1:64 - CAD Designer to Scale Down Model for 3D Printing
Small air dump in 1:64 scale. Drawings from onsite measurements are provided are in 1:32 scale. Data sheet Mechanical drawing also available.
REDA
Designer