Little commercial remodel in Puerto Penasco Mexico

in 3D Modeling Design held by this
Contest Closed
Description:
I bought a little commercial building and I want to completely update this building and use it for a franchise wholesale and retail auto parts distributor. I am tearing down much of it. I want to stay with a similar look of other locations. I am expanding the interior adding more second floor and a larger showroom than exists currently. The dimensions on files are accurate and I need to stay with in them. I am looking to keep most of my inventory stored on the second floor and a slide to move parts from the second floor to the first floor easy and fast. I will move and redesign the current water closets and add a little space for a cafe (coffee maker, small refrig, microwave and toaster oven.} Total building area including first and second floor to be 300 M2 +/-. I want to keep energy efficiencies and the salt air and desert climate in mind. I want to add a small office that has the best advantage to oversee the sales floor and inventory if possible at least the check out area I will be using extensive camera system to help eliminate theft. The pictures is the actual building and the dimensions are what I have to use. I'm not set on any specific parking lot entrance or exit.. The windows I want to stay with the look that are 1 meter by 1 meter.
Wants:
I'm looking for a well designed very workable plan for this type of business. I want good flow, good inventory storage where checking stock is good easy to keep track and good flow in getting product to check out area. a small cafe area and a small office with large one way glass to see as much of the building area as possible. I would like the office on second floor with maximum view customer area and the view outside to street area if possible. The more details it has and more proper material lists the better. You can go to www.mercadoderefacciones.com and look at some of the other locations. I need to stay with this type of look but a nice exterior and must flow well on inside
Don't Wants:
I don't want something that looks like it should be something it's not. Like a commercial space looking to residential. I do not want any of the public area to have access to inventory areas, Theft is a big concern.
Software:
  1. I want to be able to open in adobe reader

Entries

#3 De Facto UNO (Interior) by zulfadzryl
Jan 3, 2015 10:26
#2 De Facto UNO by zulfadzryl
Jan 3, 2015 6:27

Discussion

Thu, 22 Jan 2015 09:29:32 +0000
Advandes
Thank you :)
Wed, 31 Dec 2014 18:27:42 +0000
I am far from out of work...If I misunderstood your post than others will too. Please revise and be more specific as to what you expect. Sounded like you wanted a whole bunch of design work....Even your comment above is confusing. You should consult with CAD CROWD before posting. I am sure they will help you to be more clear in your requests...good luck!

this

Buyer

Wed, 31 Dec 2014 17:45:34 +0000
WOW! I see why you are out of work! You misunderstand what I am looking for.....literally. My observation of you: look around the web... don't understand.. insult to mask my ignorance. I will post both Advandes and REDA comments so all can have concern.
Tue, 30 Dec 2014 21:02:00 +0000
Advandes

;) thank you
Tue, 30 Dec 2014 14:13:43 +0000
I am sorry but I have to comment: As an MEP Engineer, I find your $120 insulting. For the entire project your looking at a minimum $5,000-$8,000 not including mechanical work. For this competitive website: $800 minimum. For your $120, priceless (literally)...
Mon, 29 Dec 2014 22:16:57 +0000
please send a photo in front of the store (side entrance)
thank you

Similar Contests on Cad Crowd

Thomas Principe
This is a shower holder for a shaving razor. It will specifically fit our razor handle. We would like the plastic holder piece to be clear, but are open to seeing other design ideas. Our razor handle color is metal and is rose gold with a light pink plastic push button. I have added measurements and pictures of a current holder that fits perfectly to make sure that our handle will fit corrrectly.
One tooth gear
I need this https://anime.kenmaz.net/view/anime/2911894 It is a one tooth gear It is a planetary https://photos.app.goo.gl/wwEcLtuG9h3kiRHz7 With this on top https://photos.app.goo.gl/ynBmdLC1N5ATSqZK6 Like this but attached https://photos.app.goo.gl/pFVhDWeFtf8n7mk67 With this arch in each tooth https://photos.app.goo.gl/PE3XtowoNhp8L4y36 To make sure the motor gear always arches the right direction Please let me know
The gentlemans shaver
We need a design for a shaver handle. The design should have an exclusive look to it, not "spacey" as many established brands are. Keywords for the design could be "gentleman, scandinavian, hipster, modern man, elegant, James Bond, simple" and such. What we need is a design made in CAD, and ultimately files ready for production, our current setup requires .dwg or .dwt files. But we would like to see an realistic 3d render of the handle. There are though some specifications for the connection between the handle and the razor blades that should be met. Since the connection is an standard set of from our razor-blade production partner. In the attached files there are an example of an handle and the lock mechanism, so the way the blades are connected and the sliding lock works should be thought into the design. It's for the scandinavian market, so the design should fit in there, and should ofcourse have a good grib, size and weight to it. We have a target weight of minimum 50-60gr to the handle.
Total Winner!!!! - Best Tabletop - Super Ellipse (in the manner of Piet Hein) with Beveled Edge
DXF CAD Drawing of a Super Ellipse shaped tabletop with the end goal being a version of Eero Saarinen's Iconic 60' Tulip Table (picture of tulip table attached below. As far as I know, Saarinen's table was only fabricated with oval and round tops. The Super Ellipse shape works best in the setting I am designing). The tabletop will be fabricated out of a 1.25" man-made composite, marble-like, material called Silestone. (If it helps you envision the end result, the material is Silestone "Zeus White Extreme" in matte white). The dimensions of the table top should be: 56" long x 36" wide. (and will be attached to a metal pedestal base). The underside of the table top should have a 1.25" bevel from the outer edge of the table top towards the center of the table top.
The first drink sling ever made - Freelance 3D modeler, CAD designer
designing a drink that goes on your wrist wanting a sleeve or sling that can fit a juice pouch simmilar to capri sun you can design the pouch any way long as easy to fit in sling or sleeve and remove has a drink spout for the straw wich is lijke a water bottle top but better drink pouch 6.25 ounces or smaller