Sports bag

Contest Closed
Description:
I have a patent design and want to make a prototype after this 3D modeling. I have the pictures of the design and need them to be made into a 3D model. The model will also need to have the inside structure, which contains some metal and plastic parts to join.
Wants:
Design details and can make it for manufacturing. I may also follow up for size change on some details when go to manufacturing.
Ask for Sample:
Please send me a sample of the initial model to show the understanding.
Software:
  1. UG
  2. PROE

Entries

#3 Sports Bag by kabbo
sir, here i have attached my design and it is very much cost effective and aesthetically sound.its just a preliminary design of your product.further work will be done soon according the process of design.
thank you.
more
Feb 24, 2017 11:07
#2 Smart sport bag by Mohamedatya
I offer you a smart design of back bag with your dimension which can be in the same time more bigger if you opened two side sockets and turned it to a hand or shoulder sport bag.
more
Feb 23, 2017 21:48
#1 Sports_bag by PraveenRajan
initial rough design for a simple sports bag.
more
Feb 19, 2017 9:31

Discussion

kabbo

Designer

Mon, 27 Feb 2017 06:07:08 +0000
who is the winner of this contest?

kabbo

Designer

Fri, 24 Feb 2017 16:33:14 +0000
well said karo
Thu, 23 Feb 2017 19:00:28 +0000
My place in line? haha my place is where ever I choose it to be. And the fact you are trying to tell me my place is ironic.
Thu, 23 Feb 2017 15:27:10 +0000
The point is that no one's asked you to go 1 step further, you are here a designer, not buyer, not moderator, not judge, so find your place in line and don't disturb
Wed, 22 Feb 2017 20:01:33 +0000
Actually I would go 1 step further and say there should be a cad skills test for anyone joining the site which they have to pass before being able to submit designs to clients. This may sound snobby but there are a lot of designs posted to competitions that are just a waste of time.
Wed, 22 Feb 2017 12:46:02 +0000
@ODBDesign

This so nice that there is ALWAYS someone who will play judge for another people's work, or maybe you are the buyer?let me see..... yes you are not
Mon, 20 Feb 2017 12:24:02 +0000
Pay peanuts, get monkeys (or dumbo) (neither have good cad skills) as proved above ^
Mon, 20 Feb 2017 12:21:16 +0000
Agree with Adam. #banpaymentpending
Mon, 20 Feb 2017 00:40:12 +0000
$350.00 is cheap, this would cost $1500.00 at a design firm anywhere in the world.
Mon, 20 Feb 2017 00:37:31 +0000
Prepay your contest and you may get some legitimate submissions, but even then I doubt it.
Your requirements are several days worth of work and $350.00 minimum. If I may ask, what happened to the
original designer of this product ?

Ching Guo

Buyer

Sat, 18 Feb 2017 19:06:56 +0000
@Nikolay if the Solid Works can export UG format, it should be fine.

@Sherifeisheikh height 60, width 38, and the most deep part is 37 - all in cm.
Sat, 18 Feb 2017 18:50:14 +0000
Can you Provide guided dimensions
Thu, 16 Feb 2017 23:03:47 +0000
I am ready to perform in a 3D model in Solid works
Thu, 16 Feb 2017 23:01:58 +0000
Solid Works Are Suitable?

Similar Contests on Cad Crowd

Brick of Money
The goal of this project is to design a desk ornament that is a conversation piece. https://goo.gl/wc3ueb There are 3 aspects to this product: 1: The foundation: A rectangle of solid metal. Should have an expensive high end look. A bar of silver is the only thing I can think of as an example foundation. https://goo.gl/wMySnL However, I am going for more of a brushed nickel look. 2: The casing that sits on top of the medal foundation. This casing is either made of glass or plastic and will be glued to the medal foundation. 3. $500 in one dollar bills will be inside the glass casing. The attached image is not high end looking but should give you a basic idea of the kind of product we are looking to develop.
Intricate Wings Design
- Small wings design based on a 2D picture provided - Each wing to be separate with a little loop at the top so as to have a necklace looped through the top - Must be able to be 3D printed - Jewellery will be made from a white metal which will be 3D printed (by Shapeways.com) - Design end product must have the layers so as to depict the image as set out by the 2D file provided
Choice FM Studio Furniture
I am building a radio station studio and need a design for the main console. I need a design for the carpenter to work from. I can provide information as to what my needs are. I also have the layout of the building the console will be housed in. Please send questions.
Teething Toy Design
We currently have a teething toy produced called Little bamBAM (it is the picture attached that looks like a giraffe). One of the aspects that mothers have commented on many times is that their children enjoy chewing on the horns – they are long enough to reach the back of the gums but they can’t push it down their throats and gag. What I am hoping to have produced is a single molded product that has multiple protrusions, with different textures. I have attached images of some popular teething products that have some of these protrusions so you can see the type of textures I am referring to. The teething banana is one of the most popular baby products on Amazon right now so it would be good to have the toothbrush part included. I am thinking this may need to be some sort of ring, but am open to suggestions. I have attached an image of an octopus that has multiple protrusions (although all the same texture) so this is one way the effect can be achieved.
Street Elbow Mod.
I would like to know if you would be interested in creating a 3D model for the attached print/sketch? If so, please let me know cost and lead time . I would like to have .STEP and cad file. outside radii are not critical so just need to be close to what is shown. Schedule 40 PVC. Thank you, Ben Neal