Fairing 3D surface in Catia

Contest Closed
Description:
Please see attached files. SolidWorks is also acceptable if recent v. Major datum points are there already plus a scan of full size lofting of the verticals.
Wants:
I am looking for draftsman or artist with similar work in their portfolio. Someone who understands what "fair" should look like. Finished project should have grid view as well as maybe a reflective finish to define the contour well. Surprise me!
Software:
  1. catia, solidworks
Additional Information
The "StationProfiles.pdf" should be used for verticals and then horizontal splines used to fair surface. Please submit an example of similar work that you have done. We have used Catia up till now. I am not sure if existing files can be converted to Solidworks so that the entire project can be edited as a whole if this one is done with SW. This part is only one of more that needs modeling....

Entries

#2 Fairing 3D Surface in CATIA Latest Release by Thant Htin
This Wall is extremely faired in CATIA and Tribon Lines module.
more
Jul 11, 2013 14:26
#1 Upper_Side_Walls Release No.1 by Thant Htin
This model is created in Tribon Lines Module for fairing the curves of Station Profiles. The surface is created in PACE Tribon. The fairness of curved surfaces is checked and edited in CATIA. And I will support the next structure modeling of coming CATIA model in Structure Workbench of CATIA. I want to present the sample model of surface fairing model and CATIA structure model in my example project archive.OK?
more
Jul 1, 2013 11:41

Discussion

Thant Htin

Designer

Sat, 29 Jun 2013 12:50:51 +0000
In the AutoCAD dwg file attached archive, I see that the station spacing is 3 feet and the station profile curves are drawn. Is that ensure that station curves in dwg file can be used to fair the surface you desired? Or is it right the station curves in the Stationsprofiles.pdf file? I cann't understand which is right.

Maksani

Buyer

Fri, 28 Jun 2013 12:14:47 +0000
Are you able to digitize and trace or use the StationProfiles.pdf as a template (its not a typical loft or hull scale drawing since they are not 'connected' in that scanned drawing) to correct an existing CAT file? you dont need to change the overall shape of the existing model, you will only be working on the correcting the edge of the Stations (spaces at 3') using the .pdf as a template surface. Its not complicated, only trying to explain it is.

Thant Htin

Designer

Fri, 28 Jun 2013 03:27:01 +0000
I am a specialist of fairing curves and surface in ship hull surface. So I think that fairing can be done for one week. I am interesting that. The fairing surface created in Solidworks and CATIA will be posted as example.

Thant Htin

Designer

Fri, 28 Jun 2013 03:26:27 +0000
I am a specialist of fairing curves and surface in ship hull surface. So I think that fairing can be done for one week. I am interesting that. The fairing surface created in Solidworks and CATIA will be posted as example.

Thant Htin

Designer

Fri, 28 Jun 2013 03:16:48 +0000
I am a specialist of fairing curves and surface in ship hull surface. So I think that fairing can be done for one week. I am interesting that. The fairing surface created in Solidworks will be posted as example.

Maksani

Buyer

Thu, 20 Jun 2013 01:55:50 +0000
The file mentioned has been replaced.
Wed, 19 Jun 2013 05:43:15 +0000
Hi!
Inside the Wallcurves archive is just one big BLACK tiff image. Please check and upload it again.
Thanks!
Sat, 15 Jun 2013 17:37:26 +0000
Dear Sir:

Your .tif archive is ruined.

Best regards

Similar Contests on Cad Crowd

Total Winner!!!! - Best Tabletop - Super Ellipse (in the manner of Piet Hein) with Beveled Edge
DXF CAD Drawing of a Super Ellipse shaped tabletop with the end goal being a version of Eero Saarinen's Iconic 60' Tulip Table (picture of tulip table attached below. As far as I know, Saarinen's table was only fabricated with oval and round tops. The Super Ellipse shape works best in the setting I am designing). The tabletop will be fabricated out of a 1.25" man-made composite, marble-like, material called Silestone. (If it helps you envision the end result, the material is Silestone "Zeus White Extreme" in matte white). The dimensions of the table top should be: 56" long x 36" wide. (and will be attached to a metal pedestal base). The underside of the table top should have a 1.25" bevel from the outer edge of the table top towards the center of the table top.
Flying Currency
Hi there, I have a very simple project. I need to produce still photos of flying currency. I will provide flat photos of currency and I need them mapped to models of bills fluttering in the wind. I need about 15 TIFFS produced in high res. You would have to model very simple forms, add the currency/money texture then render.
Choice FM Studio Furniture
I am building a radio station studio and need a design for the main console. I need a design for the carpenter to work from. I can provide information as to what my needs are. I also have the layout of the building the console will be housed in. Please send questions.
Cat Earred Headphones
We want a set of headphones designed that have cute cat ears designed on the top of the headphones. The mockup that we will include uses Beats Solo HD headphones as the template. This an easy way for us to portray the aim of the project, as we want the final outcome to look sleek and simple, but not exactly like Beats. We want a redesigned set of headphones that has fashionable cat ears on top suitable for young 20 year old females. Make 2D mock ups to give us an idea of what you have designed, then also to make up plans that can be sent to manufactures for immediate production, preferably in a cad format that can be used to 3D print the shell. Color, style, aesthetics are all up to designer, but general preferred color themes will be for white to pair with pink, and baby blue to pair with very light red.
The gentlemans shaver
We need a design for a shaver handle. The design should have an exclusive look to it, not "spacey" as many established brands are. Keywords for the design could be "gentleman, scandinavian, hipster, modern man, elegant, James Bond, simple" and such. What we need is a design made in CAD, and ultimately files ready for production, our current setup requires .dwg or .dwt files. But we would like to see an realistic 3d render of the handle. There are though some specifications for the connection between the handle and the razor blades that should be met. Since the connection is an standard set of from our razor-blade production partner. In the attached files there are an example of an handle and the lock mechanism, so the way the blades are connected and the sliding lock works should be thought into the design. It's for the scandinavian market, so the design should fit in there, and should ofcourse have a good grib, size and weight to it. We have a target weight of minimum 50-60gr to the handle.