Description:We need a design/file ready for prototype printing and injection molding
Product is placed in swimming pool skimmer or pump basket and is in constant water flow. We need a container to hold the copper/silver cilinder to give it a more MARKETABLE LOOK.
Plastic container/packaging for blueray xl 4-in-1 Mineral Clarifier. check cilinder in bluerayxl.com. I will need 3 columns with a square plastic netting/strainer (about 3.5 x 5 mm). to let water thru but not debris. Top and bottom i'm attaching strainer sample.
use drawing as a guide but keep yellow and blue cylinder sizes intact, container can change slightly in design and measurements.cilinder
Wants:>3d printer and injection mold ready drawing and file.
I need a snap-on lid than can be removed with a flat head screwdriver if needed.
>color: Blue metallic
>need holders/teeth for 2 different size pipes as in picture,
> Plastic thickness about 2 to 3 mm
>Tough look with pleasing aesthetics.
> Improve on design of current drawing.
- Autodesk Inventor
Similar Contests on Cad Crowd
Unique, yet Simple, Card Holder Tray (Children's Board Game)
INTRODUCTION: Friends, I place this project in your capable hands... please help me move the cause forward! I'm a dad, and one-person start-up, using my retirement savings to develop a children's board game. (There's a real lack of truly funny reading games for kids aged 5-8 years. Most are really boring. My intention is to introduce a new board game at retail that fills the gap and gets younger kids laughing and reading.) ASSIGNMENT: Develop the production-ready Mini Card Holder Tray which will be used in the game. Deliverables (hope I got these right)... - A CAD and STL file which can be (a) used to 3D print a prototype/sample, (b) provided to a manufacturer for development of a mold and mass production of tray - A PDF showing the tray from 2-3 perspectives USE OF TRAY: This game includes miniature playing cards, and they are held in a card holder tray which is essential to game play. Play starts as the card tray slides over (on top of the table or playing surface) to Player 1. He draws his cards. After playing the cards, he pushes/slides the tray to Player 2. She'll take her turn, and slide the tray to the next player. Turns continue until the game ends. MAXIMUM DIMENSIONS OF TRAY: So the tray will fit in the game box, its size cannot exceed 170mm x 100mm x 35mm. CARD SLOTS IN TRAY: To ensure proper game play, the card slots (where the cards fit) must be as follows… - Left Side -- a front and rear slot to hold cards - Middle -- a single front slot to hold cards - Right Side -- a front and rear slot to hold cards Each tray opening/slot must be able to hold at least (35) 44 x 67mm mini playing cards... that's about 14mm deep. (Please also provide the appropriate extra space in the width of the card slots so the cards can be easily inserted and pulled out.) See attached image of my temporary tray (01_TempTray.jpg) that I cut up crudely from an ice cube mold, for a visual of the number of tray slots, and their orientation. THOUGHT-STARTERS FOR STYLE OF TRAY: I've seen two types of trays that could work well. See attached examples in PDF (02_TwoTrayTypes.jpg)... - Tray that lies flat (on its back) - Tray that holds cards somewhat upright (at an angle for viewing) Or maybe a hybrid of the two tray types? In terms of design, something that's simple, contemporary and visually pleasing (like Apple® products), would be great. I've attached an earlier mock up of the game's box cover, in case that can stimulate ideas also. (03_BoxCover_InProgress.jpg)
Universal Phone Mount
Hi Cad Crowd! We're in need of adjusting one of the components of our product. We have an existing 3D model that we need adjusted. We are keeping the same top and bottom connection the same. The basic design is similar to a standard universal phone mount for a car. We want to use the same mechanism as shown in the pictures and then adjust it to our requirements. The system will be 3 major components. Part 1: Back piece that has top connection and bottom connection which won't be changed much except for the width. This area will be where the gears/spring/everything sits on. Part 2: This will be the two "wing walls" that extrude left and right that will be sat on the back plate area. Part 3: Will enclose this area and have a bottom stub where the phones sit. We play on adding some little foam on the front of part 3 and on the insides of the wing walls. We think that the gear mechanism can be reduced in size and that we can flip it so that they sit above the wing walls (and in the center of the system).
Setra Nano Design Options
There is an attached image of a new product concept, which is essentially a wall-mounted sensor that shows a light ring indicator of red or green. The product is designed to cover a single-gang US electrical wall box, similar in size to a wall switch. Once wall-mounted, it stands off the wall about 10 mm, where the light ring can be visible from front or side. We want some industrial design options to look at that are different from our design.
Mosquito Trap Redesign
We want to redesign our UV LED mosquito trap, an outdoor product to be placed in tent, outdoor café, farms to reduce the damage by mosquito. It should be simple, solid, low priced, slim, good quality and fashionable- a mid-way between high-tech and disposable traps. We would like its housing to be partially transparent for the visibility of LED light. Also, we prefer the entry point for mosquito to be a maze design. Type: Mosquito trap Target Audience: All age groups Competitors: enclosed in attachments Design: Maze entry point, partially transparent body, UV LED light, PCB board, cotton stand to put cotton soaked in mosquito attractant liquid, 2AAA battery case Material: Plastic Any software is acceptable if STL format file can be provided Any further questions, please feel free to comment.
Biological Cell Cluster
I am looking to obtain a 3D CAD model of a biological cell cluster in order to transfer it to a multiphysics simulation software (COMSOL). The cluster will consist of 120 'cells' in the shape of a hyper-dodecahedron (https://theory.org/geotopo/120-cell/ ). Each side of each dodecahedron must measure ~5um.