Sketchbook Designer

Contest Closed
I need 3 concept presentation boards done in sketchbook designer with all the layers and files editable. The product will be a mobile phone which the design is open to you.
3 concept boards= 1 of the money shot, the selling shot. 1 of orthographic views, angle placement, different designs. 1 of the storyboard, how its used. Looking for a slick design, maybe the next line of iPhones, although it would be nice to have some buttons to show shading, radius details perhaps
Don't Wants:
Please bare in mind that this is a third year university project. So not quite professional, but still decent.
Ask for Sample:
If you don't mind roughing out a few phone concept designs that would be great


No Entries Submitted Yet.


No Comments Submitted Yet.

Similar Contests on Cad Crowd

start a revolution!
design a pair of scissors for my new company, I have all of the specs, just need an AutoCad design to send to the manufacturers
Sprocket Assembly
I have a design that in appearance is similar to a sprocket and hollow shaft. There is a need for a 3D model that can be used for rapid prototyping/molding. The final design should be in Autocad 3D and as shown in the Sketch referred to as Fig. 9. Attached are two 2D Autocad drawings of the “Support” and a “Tube”. Also attached are two scanned images Fig 1, Fig 2 and Fig 3 of the changes with instructions. Originally the Tube and Support were designed as two separate parts to be assembled together, but the new design requires that they are to be made as one “Assembly” as shown in Fig. 3. The following changes have to be made to the Tube FIG 1: The Tube has to be reduced to 2 inch long. The top portion of the tube has to be deleted. The Tube Outer Diameter has to be increased to 7/8 inch and the wall is 1/8 inch. The Tube is now placed on the support aligning the Slit This makes the Tube and Support one piece called the “Assembly” For additional information see Fig 2 and Fig 3. The 3D drawing will be used for Rapid Prototyping. 1. I would need a 3D drawing in Autocad, and possibly also in one of the following formats IGES (.igs), and/or SolidWorks (.sldprt) and/or Stl that is generally used for Rapid Prototyping. 2. I will also need the 2D drawing of the Assembly in Autocad. This design is not to be distributed or used by anyone else without prior permission from me. All items sent to you must be destroyed or returned to me. Thank you, Frank
Modeling the head of people Printable 3D
need to design a sphere with 7 feet, 8.5 feet and 10 feet diameter. It should be designed in a way that each part to assemble should be of same size. Parts should be detachable. A person should be able to detach 1 part and enter it and person outside should be able to attach it back. If the sphere rolls then part should not detach. Air should pass in the sphere. Design should be in a way easy to produce. It should be very attractive for viewers. Advice me the material to be used.
Adaptive snorkel
A snorkel with an inhaler mouthpiece and a mouth mask. It also have a strap to hold it on the user's face