Portable UV Water Purifier

Contest Closed
Description:
We are looking to design an portable water purifier with UV - C Led bulb and to make a jacket of UF tinted glass to protect the eyes / skin when the UV-C is immersed in water.

IF the UV-C is not needed to be immersed in water and yet disinfects the germs and bacteria we can consider this aspect.
Wants:
Unique design and shape
Adaptability to Indian markets
Cost-effective with easy portability.
Don't Wants:
Same design like steripen UV-C purifier
Ask for Sample:
DEsign image
Software:
  1. AutoCAD
Additional Information
Members,

We need a detachable UF cover attached to the object to cover wearer's eyes and skin when the UV bulb is activated under water.

This is the main aspect of the design.

Entries

#18 Portable UV Water Purifier by muruganandham mm
Jul 30, 2015 3:23
#17 UV purifier portable by TomyAsa
any question or any request please contact me tom.asadinawan@gmail.com
more
Jul 29, 2015 0:43
#16 white purify by abdillah yusuf
purify with white finishing finish and orange display
more
Jul 25, 2015 13:23
#15 drop 1.5 by Rahul Sharma (RS)
Jul 23, 2015 12:08
#14 drop1.4 by Rahul Sharma (RS)
as you can see in the image there is a tinted glass, which can easily shift up and down according to needs
more
Jul 17, 2015 15:09
#13 Water Purifier by Petr Herder
Jul 17, 2015 7:06
#12 Water Purifier by REDA
Jul 15, 2015 18:36
#11 Water Purifier by REDA
Jul 15, 2015 18:36
#10 water purifier by REDA
Jul 15, 2015 17:27
#8 drop 13 by Rahul Sharma (RS)
please give the review, or give message
more
Jul 14, 2015 6:37
#7 drop 1.2 by Rahul Sharma (RS)
Jul 9, 2015 23:04
#5 Portable UV Water Purifier 1 by Elen
Here is in file two models (previos and like at picture)
more
Jul 7, 2015 20:55
#4 drop version 1.1 by Rahul Sharma (RS)
please see all the files attached to this.
3D pdf and image file.
more
Jul 2, 2015 0:48
#3 Purifier by Elen
If u need model in autocad, i will send it to you. But I can understand you need only the image.
Regards
Elen
more
Jun 30, 2015 20:32
#2 Water Purifier by Ts cg artwork
Jun 29, 2015 22:48
#1 Water Purifier by Ts cg artwork
If you have any suggestion of design please let me know.
more
Jun 29, 2015 22:47

Discussion

Fri, 24 Jul 2015 09:43:33 +0000
minimum dimensions?

REDA

Designer

Thu, 23 Jul 2015 10:32:06 +0000
Hi,
Rating please ...
Tue, 14 Jul 2015 05:03:39 +0000
sir,
i have sent you the message please check the attachment with it. and please give me reply, so i can work on it further.
Sun, 12 Jul 2015 05:09:29 +0000
My design has better ergonomics and it is easy to hold in hand and as well as to keep in pocket or you can make it as an key ring too.
it has space from inside to hold two AAA battery and it can be change easily. It has looks like an DROP, it make a symbol of an purity.
it can be manufacture at low rate and it is has not to machined after injection molding.
Sat, 11 Jul 2015 00:31:37 +0000
if still you are able to see the cover images even, that i think it will be necessary to pay the payment.
Sat, 11 Jul 2015 00:29:27 +0000
yeah sure, now check the cover images
Sun, 05 Jul 2015 15:59:35 +0000
I am not even able to see cover design atleast i need to see if there is something innovative or same modified design.
even a cover image will do
Sun, 05 Jul 2015 12:14:54 +0000
I need to atleast see the rough draft
Tue, 30 Jun 2015 06:35:27 +0000
SIR,
this is my request that please pay the payment, then you can see the designs other wise you can only see the cover picture.
i have great idea for you.

Similar Contests on Cad Crowd

Stand Alone Cash Drawer
Flip Top medal cash box for street and food venders. http://cdn.barcodegiant.com/images/models/lg/APG/flip-top.jpg Looking for a way to lock this to a table, ability to mount on a wall, or temp way to fasten to table.
Sprocket Assembly
I have a design that in appearance is similar to a sprocket and hollow shaft. There is a need for a 3D model that can be used for rapid prototyping/molding. The final design should be in Autocad 3D and as shown in the Sketch referred to as Fig. 9. Attached are two 2D Autocad drawings of the “Support” and a “Tube”. Also attached are two scanned images Fig 1, Fig 2 and Fig 3 of the changes with instructions. Originally the Tube and Support were designed as two separate parts to be assembled together, but the new design requires that they are to be made as one “Assembly” as shown in Fig. 3. The following changes have to be made to the Tube FIG 1: The Tube has to be reduced to 2 inch long. The top portion of the tube has to be deleted. The Tube Outer Diameter has to be increased to 7/8 inch and the wall is 1/8 inch. The Tube is now placed on the support aligning the Slit This makes the Tube and Support one piece called the “Assembly” For additional information see Fig 2 and Fig 3. The 3D drawing will be used for Rapid Prototyping. 1. I would need a 3D drawing in Autocad, and possibly also in one of the following formats IGES (.igs), and/or SolidWorks (.sldprt) and/or Stl that is generally used for Rapid Prototyping. 2. I will also need the 2D drawing of the Assembly in Autocad. This design is not to be distributed or used by anyone else without prior permission from me. All items sent to you must be destroyed or returned to me. Thank you, Frank
Smart Bracelet - CAD Designer Contest for New Product
The e-touch The e-touch is a smart bracelet that has to be synced to your mobile device, when entering an event, meeting or club. When the connection between your mobile device and the e-touch is made, you can go ahead and 'e-Shake'. How does it work? When entering an event you’ll receive an e-Touch bracelet. By shaking hands with other people wearing an e-Touch, the bracelets connect and sync information trough your handshake, called the ”e-Shake”. The information received trough e-Shaking will be sent to an app, called Shake-on, on your mobile device which will store the information on your phone. Depending on your app settings/preferences the new information/friendship will be published on your Shake-on account (your personal page on the Shake-on social website).
Oyster Cage
I need some oyster pots. The wire mesh will be 1/2" and the sides and center support will be made out of plywood. The mesh will be plastic coated steel from Riverdale Mills (1/2" center to center). Cage will be a cylinder with a 12" radius and a length of 4 feet. There will be a 3/4" rod passing through the center. Unlike other cages, one end will open for loading and unloading the oysters. See theoysterguy.com faq pdf for an idea of what I am looking for. Also see attached picture. I have come up with one idea for closing the ends, but any other ideas will be appreciated. The parts will be cut out of 1/4" plywood and cut out on a cnc machine (shopbot). Parts will then be coated in epoxy to make them waterproof. I want ease of assembly. Notches to align wire mesh. Longitudal arms should notch into center piece and have tabs to align outer ends. There should be hole in the sides to allow for waterflow and leverage when closing and opening one end.
Silicone side strips texture design
Hello, the shampoo bottle we are designing will have silicone strips on the sides of the bottle for a better grip. The strips will have a texture on them, so the contest is to create the most stylish/sexy/cool looking texture for side strips. At the moment the texture is as on the file provided, please use the strips in the file to draw on. The most interesting and good looking design will win. The shampoo bottle will be sexy, slick and stylish.