The e-touch is a smart bracelet that has to be synced to your mobile device, when entering an event, meeting or club. When the connection between your mobile device and the e-touch is made, you can go ahead and 'e-Shake'.
How does it work?
When entering an event you’ll receive an e-Touch bracelet. By shaking hands with other people wearing an e-Touch, the bracelets connect and sync information trough your handshake, called the ”e-Shake”. The information received trough e-Shaking will be sent to an app, called Shake-on, on your mobile device which will store the information on your phone. Depending on your app settings/preferences the new information/friendship will be published on your Shake-on account (your personal page on the Shake-on social website).
Wants:1) Because the e-touch will be used at business meetings, the bracelet should be as neutral as possible. So no fancy colors should be used.
2) It must fit under a sleeve, it shouldn't be to big or thick.
3) Because of hygienic reasons the bracelet should exist of two parts. One part were all the technology is put in (electronics part, dimension 25x20x08 mm) and the other part which would be a plastic band that can be thrown away after use. These parts should be integrated in a way that it wouldn't be noticeable for the costumer.
4) A 'Shake-on' logo. We don't have a final design for Shake-on. You can design your own Shake-on design for now.
5) A 3D model that can be used for 3D printing and promotional videos. I don't prefer any software!
Don't Wants:A smart bracelet that looks like a toy or a gadget.
Additional InformationFirst of all let me tell you that we are a start-up with a small team, of which non of us has the skills to draw professional hand sketches. I made a sketch my self to give an impression of what I except from the designers.
I will also provide you with a couple links to other similar products.
#2 E-Shake by Kevin Spencer by kspence
This device has been designed using a soft molded material, like Silicone or TPE. The electronic portion is a hard enclosure and pops out of the soft strap. It is overall very minimal and clean, appropriate for business and networking users alike. Subtle colours would be used as well.
A 3D file can be supplied upon request.
A 3D file can be supplied upon request.
Similar Contests on Cad Crowd
Hollow ball that can open
I need a plastic prototype design in 3D. This object is a hollow ball (20mm in diameter, 1mm in thickness). The ball is composed of 2 parts (top and bottom piece). The top piece will slide into the bottom piece. On the top of the ball are small air vents (0.7mm) that form the shape of a circle. The bottom of the ball will have an opening (4mm diameter). There is a small arch inside the ball that sits at the base. The arch will extend from one end of the opening to the other. The arch will will be 1 mm in thickness. I have attached images I created with paint.
I have a design that in appearance is similar to a sprocket and hollow shaft. There is a need for a 3D model that can be used for rapid prototyping/molding. The final design should be in Autocad 3D and as shown in the Sketch referred to as Fig. 9. Attached are two 2D Autocad drawings of the “Support” and a “Tube”. Also attached are two scanned images Fig 1, Fig 2 and Fig 3 of the changes with instructions. Originally the Tube and Support were designed as two separate parts to be assembled together, but the new design requires that they are to be made as one “Assembly” as shown in Fig. 3. The following changes have to be made to the Tube FIG 1: The Tube has to be reduced to 2 inch long. The top portion of the tube has to be deleted. The Tube Outer Diameter has to be increased to 7/8 inch and the wall is 1/8 inch. The Tube is now placed on the support aligning the Slit This makes the Tube and Support one piece called the “Assembly” For additional information see Fig 2 and Fig 3. The 3D drawing will be used for Rapid Prototyping. 1. I would need a 3D drawing in Autocad, and possibly also in one of the following formats IGES (.igs), and/or SolidWorks (.sldprt) and/or Stl that is generally used for Rapid Prototyping. 2. I will also need the 2D drawing of the Assembly in Autocad. This design is not to be distributed or used by anyone else without prior permission from me. All items sent to you must be destroyed or returned to me. Thank you, Frank
Portable UV Water Purifier
We are looking to design an portable water purifier with UV - C Led bulb and to make a jacket of UF tinted glass to protect the eyes / skin when the UV-C is immersed in water. IF the UV-C is not needed to be immersed in water and yet disinfects the germs and bacteria we can consider this aspect.
A snorkel with an inhaler mouthpiece and a mouth mask. It also have a strap to hold it on the user's face