Plastics Engineer Needed

in Product Design held by Maksani
Contest Closed
Description:
I am working out a proof of concept for a marine habitat and need an expert who understand techniques of pvc/vinyl or other plastic joinery, using specific glues and (initially) existing extruded shapes. I will provide sketches and my ideas. The plastics engineer will provide feedback and (later on) CAD.
Wants:
The entrant should be able to think outside of the box, have thorough knowledge of plastic construction products and be preferably able to use CAD.
Don't Wants:
I dont want to limit the selection to draftmen, so if you dont use CADD but DO have extensive knowledge of plastic techniques, new and old, please consider. Also, I have no idea what he budget is but I am required to enter something here.
Software:
  1. SolidWorks
  2. AutoCAD
  3. 3D Production

Entries

No Entries Submitted Yet.

Discussion

No Comments Submitted Yet.

Similar Contests on Cad Crowd

BBladez
a dual kidney shaped tubular design to fit the contours of human buttocks and support up to 300 lbs.
Golf Ball mark repair tool
Helical shaped tool 3-5 inches in length with flat circular top. Basically a corkscrew, ideally one turn total with flat edges. Idea is it would screw into the center of a divot so you could lift the earth up then use flat top to even green out.
Adaptive snorkel
A snorkel with an inhaler mouthpiece and a mouth mask. It also have a strap to hold it on the user's face
Stand Alone Cash Drawer
Flip Top medal cash box for street and food venders. http://cdn.barcodegiant.com/images/models/lg/APG/flip-top.jpg Looking for a way to lock this to a table, ability to mount on a wall, or temp way to fasten to table.
Sprocket Assembly
I have a design that in appearance is similar to a sprocket and hollow shaft. There is a need for a 3D model that can be used for rapid prototyping/molding. The final design should be in Autocad 3D and as shown in the Sketch referred to as Fig. 9. Attached are two 2D Autocad drawings of the “Support” and a “Tube”. Also attached are two scanned images Fig 1, Fig 2 and Fig 3 of the changes with instructions. Originally the Tube and Support were designed as two separate parts to be assembled together, but the new design requires that they are to be made as one “Assembly” as shown in Fig. 3. The following changes have to be made to the Tube FIG 1: The Tube has to be reduced to 2 inch long. The top portion of the tube has to be deleted. The Tube Outer Diameter has to be increased to 7/8 inch and the wall is 1/8 inch. The Tube is now placed on the support aligning the Slit This makes the Tube and Support one piece called the “Assembly” For additional information see Fig 2 and Fig 3. The 3D drawing will be used for Rapid Prototyping. 1. I would need a 3D drawing in Autocad, and possibly also in one of the following formats IGES (.igs), and/or SolidWorks (.sldprt) and/or Stl that is generally used for Rapid Prototyping. 2. I will also need the 2D drawing of the Assembly in Autocad. This design is not to be distributed or used by anyone else without prior permission from me. All items sent to you must be destroyed or returned to me. Thank you, Frank