hook
in CAD Design
held by nelson Vigneault
Contest Ended, Winner(s) have been selected.
Description:
1) A set of 4 hooks ( approx: 20X20 x5 mm) to be made in Delrin. 2) and a small connector device ( finger shaped)
3) a guide rail
Wants:
Drawing Needed within a week.( approx: 20X20 x5 mm) to be made in Delrin. The guide rail is about 1000 mmm long by 54mm X 10 mm.
Software:
- cad for machining in CNC
Prepaid PrizeEntries
1st Winner
#13 Hooks+guide rail+finger pull
by vinya
Enclosed are 2d pdf and solidworks files
in case of doubt or any correction i am to order
Best regards
in case of doubt or any correction i am to order
Best regards
Dec 1, 2013 11:27
#1 hook variants
by danby
piece has all variants angles.
Your wish for machining, 3D models or 2D drawings only ?
I will check updates and will send the other depending on your FEEDBACK
Your wish for machining, 3D models or 2D drawings only ?
I will check updates and will send the other depending on your FEEDBACK
Nov 29, 2013 21:08
#8 hokks + guide beam + finger pull
by vinya
Enclosed are 3dpdf files to view and other formats for cnc
Nov 30, 2013 10:03
#9 Guide Beam
by danby
please check the dims, because I'm not sure for my interpretation on you draw
Nov 30, 2013 10:18
#10 Hook
by Kristian
I've just made 3d of the hook,beam and finger.That you had are sketches and they aren't so well...and I made some upgrades that these details can produce.But I can't understand how you would produce the hook,at first I thought that it's from sheet metal but there is different thickness so it won't be from a sheet 2 mm thick.I suggest you would use 2mm metal sheet then cut out from back side 0.5 mm and then bend this outside part (4,5 mm high).... but it doesn't have any science. I'll post that what I've done.If you want to bend 1,5 mm thick and to faces to be align at 90 degree and you want to keep that rounds R2 and R0.75(they call fillets)you need at minimum R1,5 in the inner corner of bending that goes 1.5+0.75 = 2.25 the outer round and yours is 0.75.So I calculate where and how much to be cutout.I can't understand how did you expect to achieve that different thickness.About finger ,I add some chamfers and rounds(fillets) which are obligate for manufacturing.
I can make drawings (PDF)about a day.But I need to know what machinery will use(milling machine or something) so I can presume the technological operation.
I can make drawings (PDF)about a day.But I need to know what machinery will use(milling machine or something) so I can presume the technological operation.
Nov 30, 2013 17:40
#11 Beam 01 Dec
by Amir Perle
use edrawing freeware to view and measure the .EDR files
Dec 1, 2013 4:54
#14 hook view
by vinya
HI! neslson
i have elclosed 3d pdf of hook for you to view
all hooks are in same directions
let me know if you need anything
bunch of thanx
i have elclosed 3d pdf of hook for you to view
all hooks are in same directions
let me know if you need anything
bunch of thanx
Dec 2, 2013 5:36
Discussion
And I suppose that you mean under "R4" and "R8" the diameter of the round of the hook?
From what material will produce that things?
pls dont add anymore views
should not be there
nelson why did u upload hook view . that was the key to win this compition. some can not understand but others can
dimensions are missing that is fine but hook view should be added
dimensions are missing that is fine but hook view should be added
By the way I need these drawings in a CAD form for submission to do prototype. But i have no means to see a CAd drawing, so you will have to send me a PDf as a proof so I can see it.
ON FINGER PULL. ( see new drawing FINGER PULL II)
a) the full length is 44mm.
b) the distance of the 1.5mm hole from the left edgee is : 8.5 mm.
a) the full length is 44mm.
b) the distance of the 1.5mm hole from the left edgee is : 8.5 mm.
For the GUIDE BEAM you now have the correction drawing named GUIDE BEAM II.
a) the size of these 2 holes should be 1.5 mm ( not 1.4 mm).
b) The top hole remain at 13 mm from bottom, but the lower hole is now at 9.5 mm from the bottom.
a) the size of these 2 holes should be 1.5 mm ( not 1.4 mm).
b) The top hole remain at 13 mm from bottom, but the lower hole is now at 9.5 mm from the bottom.
A) On the beam, the distances of these 2 holes have to be revised. My drawing is wrong. I will submit the revision this afternoon.
B) Hook,
Question 1: There is no 0.75 anywhere. If you mean the section at 45 degree it is 1.75 mm. I guess I do not know what is a "fillet". That base section with the 2 radius, ( R0.75 and R2.0) exist only at the bottom of the part.
Question 2 : It should be 8.4 mm ( 8.5 is wrong on my drawing).
B) Hook,
Question 1: There is no 0.75 anywhere. If you mean the section at 45 degree it is 1.75 mm. I guess I do not know what is a "fillet". That base section with the 2 radius, ( R0.75 and R2.0) exist only at the bottom of the part.
Question 2 : It should be 8.4 mm ( 8.5 is wrong on my drawing).
Finger pull
There are 2 missing dims - total length of the part - you gave 14.5 mm from left side, 19 mm from right side, and the total distance is missing
the distance of the 1.5mm dia hole fro the left side
please update so I can finish and upload the design
Amir
There are 2 missing dims - total length of the part - you gave 14.5 mm from left side, 19 mm from right side, and the total distance is missing
the distance of the 1.5mm dia hole fro the left side
please update so I can finish and upload the design
Amir
1. what should be the fillet at the hook corner? in side view it is written 0.75, but on front view the line is 1.5 mm from the top surface. please check and confir, the right dim.
2. on the side view total hight is 8.5mm, but in front view it is 8.4. what is the right dim?
2. on the side view total hight is 8.5mm, but in front view it is 8.4. what is the right dim?
please check the distance of the 2 1.4 mm holse in the beam, its defined as 13 mm and 5.6 mm from bottom, meaning the distance is 7.4, and in the picture it looks less then 2 mm.
Please confirm the right distances between the holes
thanks
Amir
Please confirm the right distances between the holes
thanks
Amir
can you please provide samples(pics) similar in real product?
Similar Contests on Cad Crowd
3D CAD Design Of A Chat Bubble
Need a very simple design of a chat bubble. Please see attached.
Will need in both .step and .stl files.
SolidWorks is fine and other CAD Software will work as long as it is saved in .step and .stl.
Will also need in 3 different size diameters:
1) 2"
2) 4"
3) 6"
Simple file so I can inlay metal into wood
I just bought a nomad 883. I can run the machine, but don't know how to create the cad files I need.
I am wanting to have a few files to inlay metal into wood. An example is here https://s-media-cache-ak0.pinimg.com/originals/5c/78/18/5c7818d9971b80c76165f8252815d02a.jpg
I wanting these to be reusable files, so that I can change the text, or images, etc.
I both need the negative to cut out of the wood and the positive to cut out of metal (or other materials). And obviously I will need to be able to adjust the depths and heights for future projects.
Three things I need to accomplish:
1) Letters with Bitwise font or a similar retro computer font. I've tried to use this font with Fusion 360 and can't figure it out. But this font is important to the project.
2) State and Country metal cut outs. You don't have to upload all the states and countries, just a few so we see that it works and let me know where to get these to import on my own.
3) Any other shape I import. Once I can do #2, I can do any shape, right?
CFD analysis
Need a quick CFD analysis of two wing profiles arranged as a dual element to find where in relation to each other is best for maximum efficiency. Also need CFD results (lift and drag) for various angles of attack. This is an automotive application. CAD of the wing profiles provided. Please provide time to completion and price estimate, need this project completed asap.
Don't know how this site works but will create a new "contest" for whatever price is agreed upon.
Created Designer Wanted
I am building a website for the company. We have CAD files mostly rendered but we do not like the design. In fact, there is no design.
We have 10 products.
Please let me know what else I missed here. What other information is required to get a quotation for this project ?
Simple design rolling tray
This is a smoke accessories line I want a simple rolling try to launch the line (examples raw rolling tray, element rolling tray) I want to manufacture a simple tray but different to roll out my line
Kristian
Designer