mobile flare skidBlind

in CAD Design held by alia4
Contest Ended, Winner(s) have been selected.
Description:
flare stack with tip and skid sketches to be done on AutoCAD as 2D
Wants:
all dimensions on sketch

Entries

1st Winner
#2 Mobile flare skid by Quantum_Designs
Hello sir/Madam,
**Corrected dimensions on first Sheet
Enclosed the Autocad file and PDF files for the drawings,
Please let me know for any missing elements/dimensions/ modifications/revisions,
Thank you for the contest :)
more
Oct 22, 2020 5:31
#1 Mobile flare skid by Quantum_Designs
Hello sir/Madam,
Enclosed the Autocad file and PDF files for the drawings,
Please let me no for any missing elements/dimensions/ modifications/revisions,
Thank you for the contest :)
more
Oct 21, 2020 10:04
#21 Mobile flare skid by Ivan Zerpa
Good day.
These are the final files.
Here you will find the drawings in autocad and pdf format. Additionally I have included two images of the model and 3d files in neutral formats (Iges / Step).
If you have any additional requirements please contact me
My best wishes
Ivan Zerpa
more
Oct 23, 2020 21:11
#19 Flare Skids by haitham
Hello Alia
This is my design for the flare in 2d & 3d and also 2 rendering photos.
Don't hesitate to contact me if you have any requirements.
Thanks
more
Oct 23, 2020 18:39
#18 Mobile Flare Skid by muratozturk
Hello,
I sent the 2D autocad dwg and pdf files, also added a 3D step file. If you want to change anything you can contact me. Thank you for the contest.
Best regards.
more
Oct 23, 2020 16:50
#17 Mobile flare skid by Sam_Mayo Eng.
Hello,
I have attached all the required documents, please check the documents and feel free to ask if there is any problem.
Thanks
SAM
more
Oct 23, 2020 16:13
#16 MOBILE FLARE SKID-1000 by Eric Villegas
Attached are DWG, STEP and PDF files for your project. I included detailed drawings with dimensions for your reference. I had to change the 1420mm c.t.c distance between the cross beams in order to avoid interference (pg. 2/3).
more
Oct 23, 2020 16:12
#15 autocad design by senthilnathan
pl find my design and let me know if you need any modifications
Reg.
Senthil
more
Oct 23, 2020 14:40
#13 auto cad design by senthilnathan
pl find my design and let me know if you have any modifications required
Reg
senthil
more
Oct 23, 2020 8:51
#12 mobile flare skid preview by Ivan Zerpa
These are Preliminary Files. Before the end of the contest I will upload the final files.
I have changed a measurement of the sketch, so that the drawing planes were correct. Please check the drawings and give me your feeback
more
Oct 23, 2020 6:40
#11 mobile flare skid #MODEL 1 by RRM
Oct 22, 2020 23:25
#10 Flare Skid by Jim81
Hopefully this is useful. DWG and PDF's attached. The 1420mm dimension didn't work out so I changed it to what I thought was appropriate.
more
Oct 22, 2020 21:07
#9 1st Model Mobile Flare Skid by Chaniago
Hi ... Alia
The following is a picture of my first model for the "Mobile Flare Skid" project. The attachment consists of several files including:
1. Image rendering of the 3D model
2. Autocad 2D & 3D drawing
3. PDF assembly drawings and details
To see it in more detail, please open it directly in the attachment.
I will look forward to seeing your suggestions and feedback.
It feels good to help you and hopefully it can be useful.
Thank you
Regards,
Chaniago
more
Oct 22, 2020 20:29
#8 Mobile Flare stack by Shahab61
Hello,
Here is my entry. please check.
if you want to change anything or need modification please feel free to contact me.
Thank you for the contest.
best regards,
Md. Shahabuddin Hossen
more
Oct 22, 2020 17:12
#5 Mobile Flare Skid 2 by Leo_CAD
It is converted now in AutoCAD 2021. If you have some comments, please let me know.
more
Oct 22, 2020 9:10
#4 Mobile Flare Skid 1 by Leo_CAD
Hi Alia! I hope you like it. If you have any comments, please let me know.
more
Oct 22, 2020 8:18
#3 𝐌𝐨𝐛𝐢𝐥𝐞 𝐅𝐥𝐚𝐫𝐞 𝐒𝐭𝐚𝐜𝐤 𝐰/ 𝐋𝐨𝐯𝐞 by Ianne Gwapings
Hello, thank you for this great contest. Here is my 1st entry as per your criteria. The attached files are both in PDF and JPG format. If you want any revisions or insights i would be glad to hear it from you. Thank you ♥
more
Oct 22, 2020 7:36

Discussion

Eric Villegas

Designer

Fri, 23 Oct 2020 00:04:28 +0000
Jim81, I'm not complaining about the sketch. The reason I'm asking is due to interference in the center section of the skid frame. the cross beams are colliding. I'm assuming the specified c.t.c distance is wrong. Either way, you're welcome if you haven't figured that out yet.

Jim81

Designer

Thu, 22 Oct 2020 21:35:00 +0000
C'mon Eric Villegas, man up. It's a hand sketch. It's actually one of the best hand sketches I've ever seen on CadCrowd.

Eric Villegas

Designer

Thu, 22 Oct 2020 21:07:07 +0000
Are the C Channel Beams C15x40 and C12x25 the correct size? They seem very wide.

senthilnathan

Designer

Thu, 22 Oct 2020 16:01:36 +0000
hi do you need 1:1scale and 1000 is meter or inches
Thu, 22 Oct 2020 09:31:33 +0000
Hi i want to know if 10000 is 1m ?
Thu, 22 Oct 2020 08:29:11 +0000
hey alia4 I can design have many incomplete dimensions and the Sketch that you have drawn on the 2nd and 3rd page is pretty much unreadable so please if possible just mark the components correctly and give correct dimensions as you are commenting down below the dimensions are in mm but you have marked some dimension in inches so please rectify for the ease of designers
Thu, 22 Oct 2020 05:15:30 +0000
Hello would you like Parts or the over all sections? Specifically like the weldment components or the entire weldment?

alia4

Buyer

Wed, 21 Oct 2020 07:39:48 +0000
if you make it 3D and 2D that would be great

alia4

Buyer

Wed, 21 Oct 2020 06:26:07 +0000
ok take this project as long as i can open STEP file on Auto CAD

Sam_Mayo Eng.

Designer

Wed, 21 Oct 2020 06:24:20 +0000
I will provide the STEP file , you can open it on Auto CAD .

alia4

Buyer

Wed, 21 Oct 2020 06:07:00 +0000
if solidworks 2D can be converted to AutoCAD then yes and in case of solidworks i prefer 3D too

Sam_Mayo Eng.

Designer

Wed, 21 Oct 2020 06:05:14 +0000
can I use solid works 2D?

alia4

Buyer

Wed, 21 Oct 2020 05:29:52 +0000
no they are in mm
Wed, 21 Oct 2020 05:28:34 +0000
Hi
Are all sizes in inches?
Best regard

Similar Contests on Cad Crowd

Flower Vase
I need a simple yet creative design of a FLOWER VASE that should be more eye catchy. If designed in SOLIDWORKS, will be easy for us to evaluate the design. Must be editable. (a non read only file needed) Renderings, if shown, will be an add-on.
Simple design rolling tray
This is a smoke accessories line I want a simple rolling try to launch the line (examples raw rolling tray, element rolling tray) I want to manufacture a simple tray but different to roll out my line
house design
pdf to cad convert
CFD analysis
Need a quick CFD analysis of two wing profiles arranged as a dual element to find where in relation to each other is best for maximum efficiency. Also need CFD results (lift and drag) for various angles of attack. This is an automotive application. CAD of the wing profiles provided. Please provide time to completion and price estimate, need this project completed asap. Don't know how this site works but will create a new "contest" for whatever price is agreed upon.
Exhibition Stands
We are looking for a designer to help us with designing exhibitions stands. The stand designs we will need are as follows: 3 x 3x3 stands designs 3 x 6x6 stand designs 3 x 9x9 stand designs Inline, peninsular & corner designs. We will be using a modular system that has standardise pieces that we can configure however we like. The modular stands have different paneling finishes: eg: textile, alupanel , wood etc. We will supply the panel & corner dimensions lighting option etc, however what we really need is a creative designer to help us come up with designs that stand out and look custom and expensive. For each stand design we will need the designs to include: Frame pieces Frame design Finished design done in textile with lighting if you think you might be able to assist us with this, please get in contact and we can talk further.