Description:2300 sq ft putting green with fringe, multiple cups, chipping wedge, drinking fountain, benches, garbage cans - all for kids
Wants:A professional looking design with multiple colors to differentiate the putting green from the trim, highlight the accessories like benches, garbage cans, drinking fountain.
Don't Wants:a basic elementary drawing like I have, I need something with dimension and colors to make all the components stand out and look appealing.
No Entries Submitted Yet.
No Comments Submitted Yet.
Similar Contests on Cad Crowd
To model the long hockey bottle spout for use with a standard water bottle. Also, gatorade bottles. Design cad file so prototypes can be made
pock box - product design contest for 3D designer
box with squares around it
start a revolution!
design a pair of scissors for my new company, I have all of the specs, just need an AutoCad design to send to the manufacturers
I have a design that in appearance is similar to a sprocket and hollow shaft. There is a need for a 3D model that can be used for rapid prototyping/molding. The final design should be in Autocad 3D and as shown in the Sketch referred to as Fig. 9. Attached are two 2D Autocad drawings of the “Support” and a “Tube”. Also attached are two scanned images Fig 1, Fig 2 and Fig 3 of the changes with instructions. Originally the Tube and Support were designed as two separate parts to be assembled together, but the new design requires that they are to be made as one “Assembly” as shown in Fig. 3. The following changes have to be made to the Tube FIG 1: The Tube has to be reduced to 2 inch long. The top portion of the tube has to be deleted. The Tube Outer Diameter has to be increased to 7/8 inch and the wall is 1/8 inch. The Tube is now placed on the support aligning the Slit This makes the Tube and Support one piece called the “Assembly” For additional information see Fig 2 and Fig 3. The 3D drawing will be used for Rapid Prototyping. 1. I would need a 3D drawing in Autocad, and possibly also in one of the following formats IGES (.igs), and/or SolidWorks (.sldprt) and/or Stl that is generally used for Rapid Prototyping. 2. I will also need the 2D drawing of the Assembly in Autocad. This design is not to be distributed or used by anyone else without prior permission from me. All items sent to you must be destroyed or returned to me. Thank you, Frank
Modeling the head of people Printable 3D