Wobbly Ballv2Blind

in 3D Modeling Design held by Scott V
TIME REMAINING: 16 days, 21 hours
  • Open
  • Choosing Finalist
  • Ended
Description:
Make a ball that feels comfortable when held in your hand and does not roll in a straight line because it is not evenly weighted. It should roll to either the left or right.
Wants:
Printable on a retail grade 3D printer using SLDPRT.

Each ball should roll with different amounts of wobble.
Don't Wants:
Modify the attached file to create five balls with a varying hollow areas in the ball. The attached file satisfies my goal, but it doesn't provide enough 'wobble'. I want the five balls to wobble in varying amounts. Ball number one should have the hollow area in the center so that the ball does not wobble. Ball number two should have the hollow area 20% off center to cause a bit of wobble. Ball number three should have the hollow area 40% off center to cause the ball to wobble more than number two. Ball number four should have the hollow area 60% of center, and ball number five at 80% off center.
Software:
  1. SLDPRT
Additional Information
I entered the Wants in the Don't Wants field in error. The diameter should be 80mm.

Entries

= Buyer's Rating
#24 hollow ball by jammy27
Mar 25, 2023 6:27
#23 Wobbly Ballv2_2 by Johnney_7
Mar 25, 2023 5:52
#22 Wobbly ballv1 by Johnney_7
Mar 25, 2023 5:45
#19 Ball with 4 hollow variations by edf
Mar 21, 2023 21:01
#16 Design of Wobble Ball by alizain
Hidden design
Mar 19, 2023 8:16
#15 Design of Wobble Balls by alizain
Mar 19, 2023 8:04
#14 Simple rendering by haitham
Hidden design
Mar 18, 2023 18:06
#12 Full models by haitham
Hidden design
Mar 18, 2023 11:41
#11 Balls by haitham
Hidden design
Mar 18, 2023 10:11
#10 3D Model Wobbly Ball by rajuk
Mar 17, 2023 7:15
#9 Mu - Wobbly Ballv2 - Pattern 2 by Martin Arguello
Mar 16, 2023 0:36
#7 Attached photo for 80% by haitham
Hidden design
Mar 15, 2023 9:44
#6 Wobble_Ball_Variants by Ziga Skobir
Mar 15, 2023 8:46
#4 ALL Ball by Juli-Soesanto
Hidden design
Mar 15, 2023 1:31

Discussion

valeriya

Designer

Sat, 18 Mar 2023 11:45:32 +0000
Please check my entry.

valeriya

Designer

Sat, 18 Mar 2023 11:45:28 +0000
Please check my entry.
Tue, 14 Mar 2023 21:07:50 +0000
Do you have a particular diameter in mind? "Comfortable in the hand" varies widely due to differing hand sizes. Also, your "Don't Wants" section seems to actually describe what you DO want. Please clarify.

Similar Contests on Cad Crowd

Miter gear set
I need a CAD file for a pair of gears to meet at a 40 degree angle. The outside diameter should be about 30mm with a shaft hole 10mm. the teeth should be coarse like maybe 10-15 total.
Solidworks teacher and study friend
I need a trainer to teach Solidworks and CATIA completely as per the industrial applications. Preferable languages is English.
Bicycle - doesn't have to be original. Just add company logo on frame.
MUST BE IN AUTODESK INVENTOR 2021 Bicycle, it can be either mountain or road style - DOESN'T HAVE TO BE ORIGINAL PROJECT: --> Needed in the next 24 hours (1 day). Pictures of part models: 1. Component models of the project. The model has to have at least 20 parts. A model is required for every component in the project and every assembly and subassembly. Make a jpg picture of each component. --> Needed in the next 96 hours (4 days). Complete detailed drawings that include dimensions, title blocks, and notes (required on every drawing) Drawings: Detailed drawings, assembly drawings, subassembly drawings. 2. Assembly Drawings: Create one or more jpg pictures of this file. This file will contain all of the components and subassemblies that are used to create the product. You will need to create multiple views of the parts in the same file. Use assembly constraints to assemble the entire product virtually. - Every component has multiple views to describe it - Every component has its own file - There is at least one assembly file containing all of the components of the product - There are no notes, dimensions, or other annotations only model information 3. Detailed Drawings: Take the information that was generated in the Layout Drawing and use it to create a separate file for each individual component. For each component you must include a detailed, fully dimensioned drawing. - Every component must be drawn on the company title block. The company name is: FCB (Future Comfortable Bikes) - There must be a minimum of fifteen to eighteen separate parts. - There must be a different drawing for each component. - There must also be a separate drawing showing the assemblies or sub-assemblies if they are needed. - Any bills of materials (BOM) required for the design - Every drawing must have an individual title and a unique drawing number associated with it. - You must show all dimensions without under-dimensioning or over-dimensioning.
Fashionable Rug
The design chosen would be made into a fine hand knotted Rug using Pure Sheep wool and Silk.
zbursh sculpting project with good face work of god idols
design god idols in 3D like ganesh, laxmi, saraswati, etc in STL format for 3D printing.