Paint Poncho ProBlind

Contest Ended, Winner(s) have been selected.
Description:
Paint Poncho Pro are wet paint brush and roller silicone protectors. I need 3D drawings to provide to my manufactures. They are asking for the file format to be in IGS or STP .
Wants:
Please refer to attached files for info. THE ONLY CHANGE FROM THE DRAWINGS IS THE PRODUCTS WILL ONLY BE ONE COLOR. THERE WILL BE NO DARKER BOTTOM COLOR.
Ask for Sample:
yes
Company Logo:
Yes
Software:
  1. IGS or STP

Entries

1st Winner
#7 Paint Poncho Pro by Mahbub
Flatter version....
more
Jan 17, 2018 8:24
#1 Paint Poncho Pro by sherifelsheikh
.stl file will be submitted if the contest is prepaid
more
Dec 25, 2017 18:18
#3 Roller by Artspace
Attached is for Roller Paint, For Brushes is to follow
more
Jan 4, 2018 10:53
#4 paint brush protector by ferrabi
Jan 6, 2018 16:40
#5 Paint Roller by Artspace
Please kindly check Thanks,
more
Jan 7, 2018 17:40
#6 Paint Poncho Pro by Mahbub
Cover for roller brush...
more
Jan 8, 2018 11:02
#8 Roller Paint Folded version by Artspace
Please kindly check, Thanks.
more
Jan 20, 2018 17:59
#9 Paint Poncho Pro by Fedenko
1 brush case.
more
Jan 21, 2018 14:22
#10 Brush Paint by Artspace
Please kindly check, Thanks
more
Jan 21, 2018 18:48
#11 Paint Roller by Artspace
Please kindly check, Thanks
more
Jan 21, 2018 19:22
#12 Paint Roller by Artspace
Please kindly check, Thanks
more
Jan 21, 2018 19:22
#13 Brush and Roller Paint by Artspace
Please kindly check, Thanks
more
Jan 21, 2018 19:54
#14 Paint Poncho Pro by Mahbub
Please check Paint roller silicon cover details. 3d file in STEP format(attached as zip). 3d file most recently updated.
Please check image named "critical" to understanding the measurements I taken.
Flat paint brush version will upload soon.
more
Feb 5, 2018 10:15
#15 Paint Poncho Pro by Mahbub
Cover flat version. 3d file in STEP file format.
more
Feb 9, 2018 16:46

Discussion

Sat, 30 Dec 2017 03:05:55 +0000
Thanks RBL for suggetion and guideline and sorry for misinterpretation. Wish you good luck.
Wed, 27 Dec 2017 09:48:56 +0000
Is not about feeling strange. Just we, designers, are not in position to request something, max we can do is to kindly ask for. Besides the design skills also the good communication it is important. My opinion. Nothing personal, my friend. Good luck!
Wed, 27 Dec 2017 05:16:23 +0000
We means we the designer community. If you feel strange and don't agree with the same then I'm sorry to include you.
Mon, 25 Dec 2017 18:46:27 +0000
Hey Kumar. You say we request. Who is we? You and who else?
Mon, 25 Dec 2017 16:57:06 +0000
We request you to make the contest prepaid..

Similar Contests on Cad Crowd

Epic Sports Goggles
I need a prototype for some sports goggles designed. The dimensions of the lenses need to be at least the size of the type of glasses uploaded but the plastic frame should surround the entire lense, not just be along the top, and the arms should have the bend at the end for the ears like regular glasses. The important part here is that the height and width allow for a full range of vision, but the lenses cannot be too curved as they will need to allow for prescriptions (lenses that are too curved limit the range of prescriptions compatible). It also needs soft rubber or foam-style padding along the top and bottom of the inside of the frame rims, for protection during sports. All going well with this first sample, I will also want more concepts of this design as well as more products with similar designs.
Storage Yards
I need to get a design done up for some storage yards i am creating. The area is roughly 9Ha, and the blocks would need to be 1/2-1Ha each. The area is relatively flat, however i want the design so i can work our what cut and fill needs to be done to create the areas, whilst moving the least amount of dirt. I have attached a picture of the area i am talking about, with the proposed storage yards in blue. The contour information can be supplied in a .dgn file format
Teething Toy Design
We currently have a teething toy produced called Little bamBAM (it is the picture attached that looks like a giraffe). One of the aspects that mothers have commented on many times is that their children enjoy chewing on the horns – they are long enough to reach the back of the gums but they can’t push it down their throats and gag. What I am hoping to have produced is a single molded product that has multiple protrusions, with different textures. I have attached images of some popular teething products that have some of these protrusions so you can see the type of textures I am referring to. The teething banana is one of the most popular baby products on Amazon right now so it would be good to have the toothbrush part included. I am thinking this may need to be some sort of ring, but am open to suggestions. I have attached an image of an octopus that has multiple protrusions (although all the same texture) so this is one way the effect can be achieved.
Brick of Money
The goal of this project is to design a desk ornament that is a conversation piece. https://goo.gl/wc3ueb There are 3 aspects to this product: 1: The foundation: A rectangle of solid metal. Should have an expensive high end look. A bar of silver is the only thing I can think of as an example foundation. https://goo.gl/wMySnL However, I am going for more of a brushed nickel look. 2: The casing that sits on top of the medal foundation. This casing is either made of glass or plastic and will be glued to the medal foundation. 3. $500 in one dollar bills will be inside the glass casing. The attached image is not high end looking but should give you a basic idea of the kind of product we are looking to develop.
MuTT MoTE™ and MeOw MoTe™
Very simple stackable design for a pet feeder with the food in the middle and a mote of water around it. Center should be high enough to keep food dry and surrounding water mote area should be large and deep enough to hold enough water for the pet to drink.