Safe WatchBlind

in CAD Design held by Abimar
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
We build an emergency Smartwatch, that can save Lifes. The so called SafeWatch will detect heart Issues and falls. There is an emergency Button where persons can call for help.
We are only interested in the look and feel of the device; engineering will be addressed at a later date.
Target Audience:
- Men and women
- Age: 50+

Design Specification:
- Comfortable to wear 24/7 for older people
- Quadrangular (Because of battery measurements and arrangement of sensors)
- Classy unobtrusive design. People should not feel weak or in need of help or old because they wear the watch. And they also don’t want to be seen as such.
- It should looks noble
- Waterproof (Swimming in pool, shower, rain)

There are two buttons:
- Alarm Button (Person has to push this button for 2 seconds in order to alarm). It has to be easy to push and clearly visible f.ex. color red.
- OK / Back to home Button. Clear difference to the emergency button.

Plastic case
- Internal dimensions: 43 x 36 x 11 mm
- Display opening is 28 x 26 mm (high x width)
- Wristband dimension is 22 mm
Don't Wants:
Un-manufacturable designs
Should not look cheap
  1. AutoCAD and .STL file


= Buyer's Rating
#11 safetywatch by dengineer
Nov 10, 2017 16:00
#20 Smart Watch For Senior Citizen by Ruchit Bogam
Nov 16, 2017 18:15
#19 Safe Watch by Stella X
Nov 16, 2017 17:31
#18 version 2 tweaked by DesignAssist
Nov 16, 2017 10:07
#15 safe watch 2.0 by johrek
Nov 15, 2017 8:52
#13 Safe Watch by Mahbub
Download Files
Nov 12, 2017 18:22
#1 First Attempt by DesignAssist
Nov 1, 2017 20:24
#8 WA1 by REDA
Nov 4, 2017 22:51
#7 Safe watch concept v2 by milivojastudio
Nov 4, 2017 22:49
#6 WA1 by REDA
Nov 4, 2017 21:56
#4 Safe Watch - Concept 1 by AlvinD
Nov 3, 2017 4:06
#2 Safe watch - Concept 1 by milivojastudio
Nov 2, 2017 0:32


Ruchit Bogam


Thu, 16 Nov 2017 08:08:37 +0000
Product should be attractive or simple design???

Steven wijay


Mon, 13 Nov 2017 15:27:11 +0000
Hi Abimar. With only 5 days to go, it would be useful if you could rank the designs submitted so we still have time to do more if required?
Best regards

Stella X


Sun, 12 Nov 2017 14:51:02 +0000
Could you please advise if the display opening could be bigger? Thanks



Fri, 10 Nov 2017 17:45:09 +0000
Hello, can you please rate the submissions. Thank you
Sat, 04 Nov 2017 07:49:19 +0000

Do you need the industrial design model, or each single part for 3d printing?



Sat, 04 Nov 2017 00:46:06 +0000
Please, check what i provided. Thank you.



Fri, 03 Nov 2017 22:06:21 +0000
We don't have any preferred design. You can see the smart watches. They are made with big place for electronic and can be similar to our watch because the dimensions are similar.



Wed, 01 Nov 2017 21:22:53 +0000
Hi, can you provide some pictures for inspiration.

Similar Contests on Cad Crowd

Litter Box
We have completed CAD now, and the functionality is fine. But the product looks too much like a garbage can right now and we want to make it look amazing and trend-forward, maybe even industrial I don't know for sure. It has to look great in a home setting, both in a bathroom or even living room. It should blend into a home's decor without looking out of place.
We want to provide a simple, functional, and unique enclosure to the market at a very reasonable and competitive price (around 100-200$) for our laser engraver below: Something easy to assemble and universal that anyone with a 2-axis laser engraver (up to 65x50cxm) can afford to buy. We also plan to offer a 1x1m laser engraver. So, it will be nice to be able to offer an extension to the enclosure. We need CAD files in STEP or IGES that we can use for manufacturing. Our brand name YoraHome needs to be visible on the machine. We want to be able to start shipping the first units during Xmas. So, the CAD design needs to be ready before the end of the month of October 2021.
Self-Balancing Staff: Weighted Walking Stick Stays Upright
Self Balancing cane: Looking to develop a self balancing walking stick for old people. So whenever they stop or sit or do anything else they simply let go of the stick. the stick will balance it self and never fall down and it will stay upright. im open to new approaches and idea that gets what i want which is easy to use walking cane with self balancing ability and good looks
Think out side the box, a new take on photo booths. Innovation starts here.
Greetings. As a commercial photographer I was getting sick of this DIY Photo Booth market. So I've spent the past 2 years prototyping different products to combine to make a reliable product to take to market. While doing this we built a company that would let our products be tested in the real world. This is my first time posting for CADCrowd so we will be as detailed as possible, if you need any more info please leave a public message or send me a private message. What we are looking for: We want to build a product that is innovative, stylish, light weight, collapsable yet durable. We are sick of seeing Boxes. We want a unit that is free standing and curtain-less. I would love a stainless steel or aluminum face, but are open to other ideas. We don't want the end product to break the bank when it comes to manufacturing so would like materials to be widely available. Height - We would like the unit to be at its tallest 70" would like it to have removable sections so hight could vary. Free standing Collapsable/mobile - END GOAL would love for the entire unit to break down in to ONE 1650 Pelican Case. Simply assembly - would like this process to go quick, maybe pins/magnets/dovetails maybe power integration from base to components. Durable - This unit will be on the go, seeing 50-60 party's a year, thats 10,000 - 50,000 potentially drunk people a year and would love to get at least 5 years from it. Stream line - think of apples clean cut designs, would love for it to feel simple, not threatening. Products: Specs Available online or upon request. HITI 510L Printer - needs side access for paper and ink, can only print on a angle of up to 30 degrees, would love for paper to come out on the front under/lower then the screen. the printer can be removable or bolted to unit. (consider break down) Windows surface tablet - needs to be accessible for touch screen, needs to be mounted flush or minimal clearance for clean design. needs access to power and usb ports from the back. Camera - standard DSLR camera. would like to have a 77mm UV filter mounted for the camera to touch up against. a dovetail plate would be great to let the camera move back and forth for different lens (up to 8" of slide) Lights - would like to place LED's and a flash tube on either side of the camera so we will need holes and diffusion plexi/plastic for this as well. we will most lily be making our own boards to mount so there aren't any specs on this yet. Adjustable angle mount - would like it if the tablet/camera/light were mounted together with a potential of up to 20 degree horizontal tilt. (consider whats behind the faceplate, don't want gaps where fingers can get caught. I hope this sums up needs and wants. I will include a quick sketch of our ideas to maybe fuel your inspiration.
Hover fit
HoverFit is an exercise device used to strengthen the upper body. The device is comprised of a circular ring with padding in the inner portion for comfort. It is approximately 10” in diameter. Users put both ankles in the ring and strap down the padding. Users utilize a percentage of their own weight to complete the movements. There is a moving mechanism that keeps the device from becoming tangled and allows for free rotation and movement. The device can be hung from any suitable location above the user.