3D Geometrical jewlery design

Contest Closed
We would like to create distinct silver jewelry for mature and modern women (35-65 years) with taste for fine jewelry, which is minimal, modern and timeless.

Icon: celebrating realistic animal figures made with repetitive geometric pattern like triangle, rhombus etc. similar to the Cartier panther ring in the project brief. 1st collection is featuring OWL.

Setting: To achieve high jewelry look, use of Channel, Mystery setting and micro pave is highly encouraged.

Size and dimensions: Use of OWL head should be between 20mm-45mm across different jewelry elements.

Stone Size: As we use semi-precious stones there are no stone size limitations,

This project is a test to select right candidates for our on-going long-term project. We welcome talented designers from across the world, but candidates with experience in Italian market would be preferred.

Please align your sketch with us, before proceeding to 3D modeling.

Files to be in STL and 3DM format.
1) Realistic shape and details of OWL head in various jewlery elements, as done in Carteier Panther collection.
2) use of repetative Geometrical shapes in cutout style, as per Cartier panther ring in the project brief
3) a unique surprise design element
4) 3 dimensional design
Don't Wants:
1) poor or unrealistic owl shape
2) any other design style other than Geometric
3) 2 dimensional/ falt design
Ask for Sample:
Out of 5 jewlery elements, please share a pendant for alignment.
  1. 3D Studio Max


#10 Geometric full 3d Owl Head by Justin Logan
3d geometric Ring, Wings cut into the band. The width of the 3d sections can be increased to added more smaller stones such as the panther design in your brief.
Look Forward to your Feedback.
Kind regards,
Jun 15, 2017 8:44
#9 Owl Pendant 1 by Justin Logan
Single Body, reproduction of your drawing.
Please provide any feedback. Thanks
Jun 15, 2017 7:59
#8 Owl_Ring by Antonix
Just a quick idea for your project, hope you like it, let me know your feedback.
Jun 15, 2017 6:06
#7 geometric owl - sketching by Albertus Putra
This is the line sketch for the owl jewelry design,
I need your feedback, I can create similar 3d model based on the sketch and your feedback
Do you prefer the asymmetric or symmetric lines?
I think this picture has a great details on the geometric shapes, do you want to be less or more details?
Jun 15, 2017 5:46
#6 Owl - Version 2 -Peak update V2 by Pablo Gosso
I modify the peak because it wasn't showing quite well in first version.
Hope the overall look and feel is what you were looking for.
Jun 15, 2017 3:28
#3 Owl series of jewelry projects - ring design v2 by Artistic Artifacts
This is a second version of the Owl Ring Design, which meets your requirements or is acceptable to modify, thanks!
Jun 11, 2017 19:02
#2 Owl series of jewelry projects - ring design (Preliminary 3D concept modeling) by Artistic Artifacts
This is an owl series of jewelry projects - ring design (not including gem)(Preliminary 3D concept modeling)
Provided as a preliminary style reference, and provide STL point & 3D-PDF data as a practical reference.
If you have any suggestions or improvements to this design, you can discuss the changes Thank you!
Jun 11, 2017 15:24
#1 Owl Ring by Omar Farouk
this is the ring and i can make
1.  Handbag handle ring
2.  Ladies Finger ring
3.  bracelet
4.  Pendant
5.  Cuff link,
6.  belt buckle.
 easily by making some modifications, the design is editable so if you want anything i can edit it for you
Jun 11, 2017 8:16


Fri, 09 Jun 2017 15:44:02 +0000
Kindly suggest to prepaid the contest many of the top designers are waiting to submit their designs.



Fri, 09 Jun 2017 13:12:06 +0000
Hi Sumit, Yes, if you are able to create the style I want.
Thu, 08 Jun 2017 14:02:55 +0000
Can i use Solidworks ?



Thu, 08 Jun 2017 07:48:57 +0000
Miquel, I am not sure if revit could do the kind of work I am expecting. Refit is more appropriate for architectural detailing.
Wed, 07 Jun 2017 15:42:25 +0000
can i use revit? and please tell me what kind of jewelry do you really want?
Sun, 04 Jun 2017 14:04:38 +0000
Better to add more winners, and make the payment prepaid. thanks

Similar Contests on Cad Crowd

Shoe Shine Box
I am looking to have a ShoeShine Box Designed. This project is unique in that I am not providing any specs for the box size and design. I am providing you with the products that will be in the ShineBox and several features that need to be incorporated into the design. I require a 3D renderings of the design. The renderings need to show the final design from all sides. Keep in mind, this is a product that will be manufactured. This design requires out of the box thinking. While the Shinebox needs to be functional and sturdy, I need to really emphasize the importance of the look and design of the box. I want it to be a functional piece of art. Just imagine Apple creating a ShineBox. I want the design to be as compact as it can be and still incorporate the required products and features. I am open to any material, except wood. I was thinking steel or brushed aluminum design. The required features: 1)The ShineBox will need to have a plate that can be turned 360 degrees and quickly locked into place. Users will put their shoes on the plate to clean them. 2) The cleaning products will be liquid and the liquid will be applied and used with the shoe brush (see attached picture). The liquid will need a rectangular box, bigger than the brush, to hold a couple ounces of cleaner. The rectangular holder needs to be easily removed for cleaning. 3) A carrying handle. I want the carrying handle disguised so as not to be seen when not in use. Here are the cleaning products that will be in the ShineBox (pictures are attached). 1) 4 - 6 oz. Boston Round Glass Bottles Height 5", Diameter 2.1" 2) 3 Shoe Brushes - Length 3 1/4", Width 1", Height 1 1/4" 3) 1 Mid Sole Brush - Length 5 1/2", Width 1/2", Height 1" 4) 1 Suede Bar - Length 3", Width 1", Height 1". 5) a 12" x 12" Micro Fibre towel. This can obviously folded to fit into a smaller space. I don't care what software is used, but I do want a hyper-realistic 3D rendering.
FEM Foam Project
Objective is to construct and replicate (to a high degree of accuracy) the experimental compressive test results for a foam specimen in Abaqus. Please find the attached file with the product dimensions and experimental test data. Upon the succesful completion of this project, additional work will be granted to the designer. We will require the Abaqus project file with the stress strain plots to ensure that the project tasks have been met.
The Mother Load
Hi talented designers – I need your help turning my idea into a more professional prototype. I would like to design a cushion or chair support to help women who have just delivered a baby naturally to sit and rest in a chair more comfortably. Sitting in a traditional chair is very painful because the new mom’s entire rear end is healing. An ideal design would enable a woman to rest or sit without having contact on any part of her rear end. Ideally it would be adjustable to fit in most chairs, it would be especially helpful for driving or riding in a car. It also should be something with simple lines that can be mass produced for a reasonable cost. I have a homemade prototype of a support, which works okay, but it needs your help! I will also attach a picture of a booster seat with a design that I really like for reference. A larger version of this booster seat, but with the cushion part of the seat modified, might do the trick! Of course I welcome any other creative designs that you might have. Having a newborn is so exhausting and having a comfortable seat that keeps pressure off of parts that are healing would be a great relief! Future moms will thank you for your creative ideas and wonderful designs! Please let me know if you have questions. I am relying on you for recommendations as to software and materials.
Keycap Design-Creativity and CAD skill needed
Hello I am looking for someone to design something for me, and possibly cast it in resin or other materials for me. For the designing part, you need to know how to model something in CAD and have a file that can be 3D printed. What you are designing requires creativity, and is a mix of art and practicality. What I am looking for is someone who can make a keycap for mechanical keyboards. At the end is some examples of competitors work, so you can get a feel for what I'm looking for. I am looking for original designs that are extremely creative. As for the next steps, I need someone who can make a mold of a 3D printed prototype, and then cast it in resin. For the resin casting, it has to be 1:1 or very close to 1:1 as the final product requires very fine detail and dimensions to properly fit. I am looking for different and fancy colors. If you just know how to use CAD, that's fine, I'll hire you for just that part. If you just know how to cast pieces, that's also fine, and please message me with details. If you just know CAD, then I will pay $300 for a creative design in a 3D printable file format. If you know how to cast resin, then for the initial run, I am looking to purchase 20 each of up to 5 different colors of the same design, for 100 total units. For the units, I will pay $5 per, or $500 for 100 units. If I like the quality, then I will hire you again for many, many more projects. Here are some examples of what competitors are making, I am looking for something generally similar, but original and creative designs. http://www.kultkaps.bigcartel.com/ https://bingecap.com/product-category/archive/ http://elitekeyboards.com/products.php?sub=access,cherrymxkeys&pid=cf5f_sku_3blk $300 will be awarded to the best 3D design, and $200 will be awarded to the second best 3D design. If you can cast the design in resin, please let me know and we will do the order separately.
Modeling & Graphic Design for a Modern Landfill
We are looking for some one to design a complete landfill for use on our Tradeshow booth. We are looking for someone who can layout the entire site. From the waste cell to the roads, to the working face of the landfill and Leachate systems, liners etc. We would also like to incorporate our equipment and products into the design. This is mostly for Leachate. What we are attempting to do is show how to Waste Companies can handle their leachate to save money. There are 3 steps to this process. The first is minimization. We have developed a spray on solution that will repel water from the side slopes of the landfill and on the flat top of the landfill. Ideally we show a rain cloud raining down on the side of the landfill here and then we can have our graphic artists do bubbles on the rendering showing where that product is used. The second part we do is pre-treatment. We have designed a system that can process and clean the leachate. The leachate is pumped from the bottom of the landfill to holding tanks where we clean it from there it goes to Leachate ponds where our Evaporation Misting Equipment evaporates the water. We also have the leachate evaporated inside buildings. Ideally we want to show the daily operations of a landfill and where all of our products are used on that landfill. Visiting our website will give you a very in-depth look at what we do Attached are some samples of how landfills have been rendered in the past as well as a top view of a modern landfill in California. Also included is a aerial photo of a landfill cell being built with liner and a side view of all the layers that go into a landfill. If you have any questions or need more details please leave note This image will be blown up to fit a booth that is 5'6" high and 113" wide