CAD Creation For Cylindrical Planter

in CAD Design held by mwalker83
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Share
Description:
We're in the process of producing a size range of cylindrical indoor/outdoor planters and need a high-res STEP file to provide to potential manufacturers.

This is a high-end homeware product so small details are important. We are open to any small design elements within the specified parameters that keep the product clean and minimal.
Wants:
We are looking to create 5 scaled sizes as follows:

EXTRA SMALL (Diameter 4", height 4")
SMALL (Diameter 8", height 8")
MEDIUM (Diameter 12", height 12")
LARGE (Diameter 16", height 16")
EXTRA LARGE (Diameter 20", height 20")

For all sizes:

- Wall thickness 1/4"
- Base thickness 1/2"

There needs to be a circular inset on the base of the of the planter to accommodate a stand. The inset should have a slight angle (see image attached). Inset diameters are as follows:

EXTRA SMALL (3")
SMALL (6")
MEDIUM (9")
LARGE (12")
EXTRA LARGE (15")

There should be no sharp edges on either the rim or base of the planter as per the references provided.
Don't Wants:
Please don't stray too far from the parameters and references provided. While this is a simple design, we don't want it to looks too rudimentary.
Ask for Sample:
Yes, please make size MEDIUM first and the winning designer will complete other sizes.
Software:
  1. SolidWorks
  2. Any CAD software
Post Similar Contest
Prepaid Prize Prepaid Prize
  • Prize #1: Under $799
Project Info
  • Created: Sun, 11 Dec 2016 21:08:10 +0000
  • Ended: Wed, 21 Dec 2016 21:08:10 +0000
  • Entries: 89
  • Designers: 49
Report Contest
Attachments

Entries

= Buyer's Rating
#18 Planter by John Bagnasco
Download Files
2016-12-13 04:25:26
#17 Planter by John Bagnasco
Download Files
2016-12-13 04:22:28
#16 Modern Indoor Planter by Gethin Evans
Download Files
2016-12-12 23:02:55
#15 Modern Indoor Planter by Gethin Evans
Download Files
2016-12-12 22:56:09
#13 Extra Small planter section view by hany74
Download Files
2016-12-12 22:19:19
#23 Planter by ODBDesign
Download Files
2016-12-13 19:21:44
#11 cylindrical planter by hughcw
Download Files
2016-12-12 21:46:21
#10 planter by Adam
Download Files
2016-12-12 21:07:20
#9 Sleek & Modern Planter by sldraftingdesign
Download Files
2016-12-12 19:00:10
#7 Cylindrical Planter by Ishan
Download Files
2016-12-12 12:39:08
#6 Cylindrical Planter by Ahmed Abulkher
Download Files
2016-12-11 22:36:39
#5 Cylindrical Planter by Aminegn
Download Files
2016-12-11 22:35:13
#4 mwalker83_pot_med00 by nyles
Download Files
2016-12-11 22:27:17
#3 According Specs by I0NX 3D
Download Files
2016-12-11 22:23:20
#2 Planters pot by handsketcher
Download Files
2016-12-11 22:19:02
#34 Cylindrical Planter by Michael Dimou
Download Files
2016-12-15 18:28:30
#46 Planter V2 by Adam
Download Files
2016-12-17 21:47:30
#44 CAD Creation For Cylindrical Planter by REDA
Download Files
2016-12-17 18:57:37
#42 Cylindrical Planter rev3 by Michael Dimou
Download Files
2016-12-16 22:27:51
#41 functional planter design concept by ARZSTUDIODESIGN
Download Files
2016-12-16 18:08:48
#40 cylindrical planter by SMITA N
Download Files
2016-12-16 12:16:53
#39 cylindrical planter by SMITA N
Download Files
2016-12-16 12:15:38
#37 simple pot by techmymind
Download Files
2016-12-16 10:33:59
#36 flower pot 2 by Dr. Dom
Download Files
2016-12-16 06:17:25
#35 Cylindrical Planter rev2 by Michael Dimou
Download Files
2016-12-15 18:30:17
#1 CAD Creation For Cylindrical Planter by REDA
Download Files
2016-12-11 22:10:10
#33 12" Cylindrical Planter by thedesigningjd
Download Files
2016-12-15 16:54:24
#32 PLANTER, MEDIUM, WITH BASE by Kevin Dobson
Download Files
2016-12-15 13:59:14
#31 cylindrical planter by PULKIT JAISWAL
Download Files
2016-12-15 13:13:19
#30 plantery pot by PULKIT JAISWAL
Download Files
2016-12-15 13:11:24
#29 flow by Dr. Dom
Download Files
2016-12-15 08:54:32
#28 Planter by Abiola
Download Files
2016-12-15 01:17:18
#27 cylindrical planter by SMITA N
Download Files
2016-12-14 13:12:21
#26 cylindical planter by SMITA N
Download Files
2016-12-14 12:18:25
#25 cylindrical planter by SMITA N
Download Files
2016-12-14 11:45:57
#24 Cylindrical Planter by Jinen Sheth
Download Files
2016-12-14 11:41:21

Discussion

ARZSTUDIODESIGN

ARZSTUDIODESIGN

Designer

Tue, 03 Jan 2017 07:59:45 +0000
thanjs mr, we hope u like
sldraftingdesign

sldraftingdesign

Designer

Sun, 25 Dec 2016 00:35:26 +0000
Thank you so much!
mwalker83

mwalker83

Buyer

Sat, 24 Dec 2016 15:33:39 +0000
We'll be picking the winner later today - thanks to all that submitted!
edward m barnes

edward m barnes

Designer

Thu, 22 Dec 2016 13:49:52 +0000
So how won?
sldraftingdesign

sldraftingdesign

Designer

Wed, 21 Dec 2016 20:27:03 +0000
very NICE!
Dr. Dom

Dr. Dom

Designer

Sun, 18 Dec 2016 08:39:29 +0000
very nice.
Dr. Dom

Dr. Dom

Designer

Thu, 15 Dec 2016 14:07:44 +0000
thanks. sldraftingdesign.

my first time doing anything like this.
sldraftingdesign

sldraftingdesign

Designer

Thu, 15 Dec 2016 14:00:39 +0000
, that is awesome. Kudos
Dragos Popovici

Dragos Popovici

Designer

Tue, 13 Dec 2016 08:06:17 +0000
Do you have any material specification?
Aminegn

Aminegn

Designer

Mon, 12 Dec 2016 19:31:00 +0000
Hello buyer,
Can you please rate our designs?

Thanks,
mwalker83

mwalker83

Buyer

Mon, 12 Dec 2016 19:27:39 +0000
Hi, yes the specified height includes the thickness of the base of the planter itself but not the stand. Thanks!
sldraftingdesign

sldraftingdesign

Designer

Mon, 12 Dec 2016 17:35:13 +0000
does the height you have specified include the thickness of the base? or is it the height of the rim then the thickness of the base?

Similar Contests on Cad Crowd

3D CAD Design Of A Dagger
I need a 3D CAD Drawing of a Dagger in a high-res STEP Format. It will be used for 3D Printing and also a graphite mold will be produced on a CNC Milling Machine. The mold will be used for casting silver. Attachment 1: Please follow this sample in regard to detail on the handle and the curves on the blade. Keep the length of the blade on the short side. This is a dagger......not a sword..
Bonadikombo Home
Use current hand drawn sketch as a general template. Convert to CAD, adding a foyer at the main entrance/door and toilet (with windows) off of the foyer before Living Room #1. Provide separation of some sort between the foyer and Living Room #1. Relative room sizes should be similar but exact dimensions are not required. Natural lighting of all areas is important. No HVAC systems. To be build in tropical Africa. 2D required, 3D will be nice. Feel free to use colors if needed.
HyterLighter Design
Looking to make a unique lighter and need help making a digital 3-D Model so that we can move forward to making our first prototype. Message for more details.
Bar
Open concept bar. I am looking at having a design made for construction/manufacturing with 3D CAD drawings done. I would also like 3D renderings done of this. The item being designed is a bar (the actual bar not the building). It will have overhead bottles hanging from the ceiling with two posts on either side of an open oval shaped bar (see through to both sides of the bar top) (essentially it will be like an oval kitchen island). There isn't a need for space behind/in the bar so the entire bar top will be white granite. The CAD drawing will show components inside/under the bar top such as beer racks and soda box dispensers. each post will have a single spout for soda dispensing. The attached file shows an idea of the bar but with the above modifications. 30 feet long oval bar 9 feet high. 44 in high bar top and hanging liquor at 9 feet.
Marijuana leaf for hood ornament
A simple marijuana leaf inside of a circle. This will be for a chrome hood ornament, so it should be "leaf-like" on both sides (3-D) with a ring around it and a one inch wide circular base under the ring where the leaf's base is. No colors necessary.