Bar

in CAD Design held by ryan hoover
Contest Closed
Description:
Open concept bar. I am looking at having a design made for construction/manufacturing with 3D CAD drawings done. I would also like 3D renderings done of this. The item being designed is a bar (the actual bar not the building). It will have overhead bottles hanging from the ceiling with two posts on either side of an open oval shaped bar (see through to both sides of the bar top) (essentially it will be like an oval kitchen island). There isn't a need for space behind/in the bar so the entire bar top will be white granite. The CAD drawing will show components inside/under the bar top such as beer racks and soda box dispensers. each post will have a single spout for soda dispensing. The attached file shows an idea of the bar but with the above modifications.

30 feet long oval bar 9 feet high. 44 in high bar top and hanging liquor at 9 feet.
Wants:
open to ideas. must be oval (center room)
Don't Wants:
I don't want a back wall.
Software:
  1. open to any software

Entries

#4 Open BAR Concept by Jinen Sheth
Feb 8, 2017 18:07
#3 Oval Bar by Jan-Peter
Dear,
Hereby I submit my design for the oval bar. It features as asked:
- Granite bar surface;
- 30 foot (9 meter) in length;
- Bar height 44 inch (1300 mm);
- A robot for the drink dispensing;
- Belts for the drink dispensing as shown in the attached image.
I hope this satisfies your needs and questions.
Kind regards,
Jan-Peter Pilon
more
Feb 7, 2017 21:03
#2 Bar Counter - CAD additions by ecooco
It is described at previous submission.
more
Feb 6, 2017 18:08
#1 Bar Counter by ecooco
I’m offering more then one option. First more basic option shows counter 30’ by 15’. Second option based on MAKR SHAKR - Caribbean robotic bar.
Main part of the project is oval counter 30’ x 15’. Conceptually counter designed as framed structure with top and front finish by using Lumonyx material. Since Lumonyx is transparent inside framed structure is installed lighting fixture and make front side very illuminative. At the end of both side counter provided two tower structures. Front side of towers are with LCD Screens, and side oriented inside bar has soda and beer dispensers and glass storages. The towers used as storages and. Behind the counter are cart storages with beer racks and soda box dispensers. At the ceiling are liquor bottle dispensers. More detailed drawings should be provided at next stage.
As second option is bar with robot arm bartender. The robots arm are unfinished basic robot since is not goal to design robot arm.
more
Feb 6, 2017 17:46

Discussion

Fri, 20 Jan 2017 01:59:47 +0000
low price
Thu, 19 Jan 2017 06:51:58 +0000
Hello Ryan, do you have specs/dimensions for the robotic arms? estimate size atleast? Also, the ceiling is to be 9 ft. from the top of bar? or from the top of ground (leaving only about 54" from the bar top to the ceiling) not to mention the height of the average bottle... Are you looking to make this unit mobile? (meaning, made in section to be taken apart and moved from place to place). Barstools, or is this simply a walk up and leave type of bar? Are you adding TV's to the sides? If so, what size? You also mentioned the oval length (30 feet) but what about the width? (15-20 ft?) And do you have a specific logo/color scheme? Also, is there a certain style you're looking for (ie. rustic, futuristic, modern, artistic, etc.)? Sorry for all the questions, just trying to grasp everything you're looking for before I start. Thanks - Chris

Similar Contests on Cad Crowd

Design the World's Coolest & Most Advanced Sledge
To explore how far we can take the coolest design, the most advanced materials, and the most fun to be had on snow - I'm going to produce a limited number of graphene x carbon fibre x kevlar sledges. This will be the first time those three incredible materials have been combined, and will produce the worlds most advanced and most expensive sledge. I have the materials, facility, and team to make these, I just need the most awesome design! **PRIZE** I have offered $200 for the chosen design - however I plan to launch a Kickstarter to fund the manufacture following completion. So I will also add an additional $400 for the winner if the Kickstarter is successful. You will also be invited to the launch event in Manchester, UK (if successful).
Bonadikombo Home
Use current hand drawn sketch as a general template. Convert to CAD, adding a foyer at the main entrance/door and toilet (with windows) off of the foyer before Living Room #1. Provide separation of some sort between the foyer and Living Room #1. Relative room sizes should be similar but exact dimensions are not required. Natural lighting of all areas is important. No HVAC systems. To be build in tropical Africa. 2D required, 3D will be nice. Feel free to use colors if needed.
GYM EQUIPMENT
I AM LOOKING TO COMBINE THE FUNCTIONALITY OF A TREADMILL AND A STAIR MASTER MACHINE INTO ONE. THIS WOULD MEAN THE STAIRS FROM THE STAIR MASTER WOULD NEED TO BE ABLE TO LAY FLAT WHEN THE USER SELECTS THE OPTION FOR THE TREADMILL. I WOULD LIKE FOR THE STEPS TO BE IN A ESCALATOR FORMAT/CONVEYOR BELT STYLE. THE MACHINE NEEDS TO BE ABLE TO INCLINE USING EITHER HYDRAULICS OR INCLINE MOTOR. THE ARMS OF THE MACHINE SHOULD BE ABLE TO FUNCTION WHEN IN EITHER mode, WHICH MEANS THEY NEEDS TO BE IN ARMS LENGTH. THE BED OF THE MACHINE WHEN IN INCLINE MODE SHOULD ADJUST WITH THE SCREEN SO THAT IS IN EYE REACH OF THE USER.
Marijuana leaf for hood ornament
A simple marijuana leaf inside of a circle. This will be for a chrome hood ornament, so it should be "leaf-like" on both sides (3-D) with a ring around it and a one inch wide circular base under the ring where the leaf's base is. No colors necessary.
HyterLighter Design
Looking to make a unique lighter and need help making a digital 3-D Model so that we can move forward to making our first prototype. Message for more details.